B8 · Energy conservation and 2-D motion of charges · Answer key
Download the printable PDF
Use energy conservation, then split a sideways-entering charge into constant-speed and accelerated motion.
Open the complete lesson
Method slides in this lesson: “Method: how to solve a two-direction problem”. Worked examples for each question type in B8
After the lesson: Investigate and connect (a short investigation, a data step and a real-world link)
Slide 1 of 7 · Energy conservation for a charge in a field
Key ideas
Ep means electric potential energy and Ek means kinetic energy, as in B6. “At A” and “at B” name the two points. Only the electric force does work, so total energy stays the same: Ep(A) + Ek(A) = Ep(B) + Ek(B).
If the charge starts at rest, Ek(A) = 0, so Ek(B) = Ep(A) − Ep(B). The potential energy lost becomes kinetic energy.
Then ½mv² = Ek, so v = √(2Ek/m). Use the object’s own mass (the ball’s, not an electron’s).
The charge q is not needed when the energies are given. To compare speeds at two points, compare the kinetic energies: more kinetic energy means more speed for the same mass.
Example
A charged pith ball (m = 2.00 × 10⁻⁴ kg, q = 1.5 × 10⁻⁸ C) is held at A in a uniform field with 4.0 × 10⁻⁷ J of electric potential energy, then released. At B it has 2.5 × 10⁻⁸ J of electric potential energy. Find its speed at B.
- It starts from rest, so Ek(A) = 0 and Ek(B) = 4.0 × 10⁻⁷ − 2.5 × 10⁻⁸ = 3.75 × 10⁻⁷ J.
- ½mv² = 3.75 × 10⁻⁷ J, so v = √(2 × 3.75 × 10⁻⁷ ÷ (2.00 × 10⁻⁴)) = 6.12 × 10⁻² m/s.
- The charge was not needed.
Try it
The same pith ball is released from rest at A, which has 4.0 × 10⁻⁷ J of electric potential energy. It reaches a point C where its electric potential energy is 1.0 × 10⁻⁷ J. Find its kinetic energy at C and say whether its speed there is greater or less than at B (where Ek = 3.75 × 10⁻⁷ J).
- Total at A equals total at C, and it starts at rest: Ek(C) = Ep(A) − Ep(C) = 4.0 × 10⁻⁷ J − 1.0 × 10⁻⁷ J = 3.0 × 10⁻⁷ J.
- At B the kinetic energy was 3.75 × 10⁻⁷ J, which is greater, so the ball is moving faster at B than at C.
Slide 2 of 7 · A charge entering a uniform field sideways
Key ideas
A charge entering a field sideways is like a ball rolling off a table: it keeps moving forward while a force pulls it down. Here the force is electric, and gravity is too small to matter. The horizontal speed vₓ is the speed along the plates.
The electric force is at right angles to the plates and points toward the plate of the opposite sign (an electron toward the positive plate). Motion does not need a force in its own direction.
The two directions do not affect each other. Horizontal: net force zero, acceleration zero, constant velocity vₓ, uniform motion. Vertical: constant force, constant acceleration a = qE/m, speed grows from zero, uniformly accelerated motion.
Together these make a parabola. In explanations say “net force zero” or “constant force” in each direction.
Example
An electron enters the uniform field between parallel plates moving horizontally with speed vₓ. Gravity is too small to matter. The top plate is negative and the bottom plate is positive. Complete the table for horizontal and vertical motion (net force, acceleration, velocity, motion type), then name the shape of the path.
- Horizontal: net force zero, acceleration zero, constant velocity vₓ, uniform motion.
- Vertical: constant electric force toward the positive plate, constant acceleration, vertical speed grows from zero, uniformly accelerated motion.
- The path is a parabola.
Try it
A proton enters the same field at the same horizontal speed as the electron, beside the top plate (negative top, positive bottom). Compare the proton’s path with the electron’s path in direction and in how sharply it bends.
- The proton is positive, so the force on it points toward the negative plate. The electron was pushed toward the positive plate, so the two curves bend in opposite directions.
- The charges are equal in size, so the forces are equal. The proton’s mass is much larger, so a = qE/m is much smaller and its path is flatter. Both paths are parabolas.
Slide 3 of 7 · From acceleration back to voltage
Key ideas
To go from motion back to voltage, work the chain backward from what you want, then forward with numbers. The electric force is the only force, so F = ma.
Then E = F/q, where q is the charge that feels the force (use the electron’s size, 1.60 × 10⁻¹⁹ C; the direction is found separately), and then ΔV = EΔd (multiply both sides of E = ΔV/Δd by Δd). Each formula has three quantities, so each step is one small calculation, with units.
Write the chain of formulas first, before any numbers: a → F → E → ΔV. Use the electron’s mass and charge from the data sheet.
Never use ΔV = ΔEp/q here: the energy is not given.
Example
An electron (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C) between parallel plates has an acceleration of 3.00 × 10¹⁵ m/s². The plates are 0.0360 m apart. Find the potential difference between the plates.
- F = ma = (9.11 × 10⁻³¹)(3.00 × 10¹⁵) = 2.733 × 10⁻¹⁵ N.
- E = F/q = 2.733 × 10⁻¹⁵ ÷ (1.60 × 10⁻¹⁹) = 1.708 × 10⁴ N/C.
- ΔV = EΔd = (1.708 × 10⁴)(0.0360) = 615 V.
Try it
An electron (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C) has an acceleration of 2.50 × 10¹⁵ m/s² between plates 0.0480 m apart. Find the potential difference between the plates.
- F = ma = (9.11 × 10⁻³¹ kg)(2.50 × 10¹⁵ m/s²) = 2.278 × 10⁻¹⁵ N.
- E = F/q = 2.278 × 10⁻¹⁵ ÷ (1.60 × 10⁻¹⁹) = 1.4238 × 10⁴ N/C.
- ΔV = EΔd = (1.4238 × 10⁴ V/m)(0.0480 m) = 683 V.
Slide 4 of 7 · The full two-direction problem
Key ideas
L is the length of the plates and Δd is the gap between them. Time is the link between the two directions. Horizontal motion is uniform: t = L/vₓ.
Vertically Δd = vᵢt + ½at², and the vertical starting speed vᵢ is 0, so Δd = ½at², which gives a = 2Δd/t². Then run the chain: F = ma, E = F/q, ΔV = EΔd.
“Just reaches the far end of the other plate” means the particle starts beside one plate and covers the full gap Δd (the vertical distance) in the time t. This is the greatest voltage that lets the electron escape: a bigger voltage gives a bigger acceleration, and the electron would hit the plate first. Set up two columns, horizontal and vertical, and fill in what you know in each.
For the final speed, the vertical speed is v_y = √(2ad) (from v² = vᵢ² + 2ad with vᵢ = 0, and d the vertical distance); combine it with vₓ as two sides of a right triangle: v = √(vₓ² + v_y²), angle θ = tan⁻¹(v_y/vₓ), measured from the horizontal. Name the principles in order: uniform motion, then uniform acceleration.
Example
An electron enters horizontally at vₓ = 4.00 × 10⁶ m/s beside one plate. The plates are L = 0.100 m long and Δd = 0.0400 m apart. It just reaches the far end of the other plate. Find the potential difference between the plates. (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C)
- t = L/vₓ = 0.100 ÷ (4.00 × 10⁶) = 2.50 × 10⁻⁸ s.
- Δd = ½at², so a = 2Δd/t² = 2(0.0400) ÷ (2.50 × 10⁻⁸)² = 1.28 × 10¹⁴ m/s².
- F = ma = 1.166 × 10⁻¹⁶ N, E = F/q = 729 N/C.
- ΔV = EΔd = 29.2 V.
Try it
An electron enters horizontally at 3.00 × 10⁶ m/s beside one plate. The plates are 0.0800 m long and 0.0300 m apart, and it just reaches the far end of the other plate. Find the potential difference between the plates, and name the two physics principles you used, in order.
- Horizontal: t = L/vₓ = 0.0800 ÷ (3.00 × 10⁶) = 2.667 × 10⁻⁸ s.
- Vertical: Δd = ½at², so a = 2(0.0300) ÷ (2.667 × 10⁻⁸)² = 8.4354 × 10¹³, which is 8.44 × 10¹³ m/s².
- F = ma = (9.11 × 10⁻³¹)(8.4354 × 10¹³) = 7.685 × 10⁻¹⁷ N. E = F/q = 480 N/C. ΔV = EΔd = (480)(0.0300) = 14.4 V.
- Principles in order: uniform motion, then uniform acceleration.
Slide 5 of 7 · Method: how to solve a two-direction problem
Key ideas
Step 1, Split: make an x column (along the plates, constant speed) and a y column (across the plates, constant acceleration).
Step 2, List: write what you know in each column. A sideways entry means the across speed at the start is 0.
Step 3, Time: time is the link between the two columns. Get it from the column with enough numbers: t = L ÷ vₓ.
Step 4, Link: across the plates, Δd = ½at², F = ma, E = F ÷ q and ΔV = EΔd. Use the chain forwards or backwards.
Step 5, Combine: v_y = at. Then v = √(vₓ² + v_y²) and the angle = tan⁻¹(v_y ÷ vₓ) from the horizontal.
Check: vₓ never changes and v_y grows with time, so the final speed must be bigger than vₓ.
Example
An electron enters horizontally at vₓ = 4.00 × 10⁶ m/s beside one plate. The plates are L = 0.100 m long and Δd = 0.0400 m apart, and it just reaches the far end of the other plate. Use the five steps to find the potential difference between the plates, then the final speed and the angle. (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C)
- Step 1: x column along the plates at constant speed. y column across the plates with constant acceleration.
- Step 2: x has L = 0.100 m and vₓ = 4.00 × 10⁶ m/s. y has Δd = 0.0400 m and starting across speed 0.
- Step 3: t = L ÷ vₓ = 0.100 ÷ (4.00 × 10⁶) = 2.50 × 10⁻⁸ s.
- Step 4: a = 2Δd ÷ t² = 1.28 × 10¹⁴ m/s². F = ma = 1.166… × 10⁻¹⁶ N. E = F ÷ q = 728.8… N/C. ΔV = EΔd = 29.2 V.
- Step 5: v_y = at = 3.20 × 10⁶ m/s. v = √((4.00 × 10⁶)² + (3.20 × 10⁶)²) = 5.12 × 10⁶ m/s. Angle = tan⁻¹(3.20 ÷ 4.00) = 38.7° from the horizontal.
Try it
NEW, for teacher review. An electron enters horizontally at 2.50 × 10⁶ m/s beside one plate. The plates are 0.0600 m long and 0.0150 m apart, and it just reaches the far end of the other plate. Use the five steps to find the potential difference between the plates and the final speed.
- Step 3: t = L ÷ vₓ = 0.0600 ÷ (2.50 × 10⁶) = 2.40 × 10⁻⁸ s.
- Step 4: a = 2Δd ÷ t² = 2(0.0150) ÷ (2.40 × 10⁻⁸)² = 5.2083 × 10¹³ m/s².
- F = ma = 4.7448 × 10⁻¹⁷ N. E = F ÷ q = 296.55 N/C. ΔV = EΔd = 296.55 × 0.0150 = 4.45 V.
- Step 5: v_y = at = 1.25 × 10⁶ m/s.
- v = √((2.50 × 10⁶)² + (1.25 × 10⁶)²) = 2.80 × 10⁶ m/s, at tan⁻¹(1.25 ÷ 2.50) = 26.6° from the horizontal.
Slide 6 of 7 · Where does the particle land?
Key ideas
A long numerical response is worth doing in order, with each result labelled: field, force, acceleration, time, distance.
Field from the voltage and the gap: E = ΔV/Δd. Acceleration with the particle’s own charge and mass: a = qE/m.
Vertical motion starts at zero vertical speed and covers the gap: Δd = ½at², so t = √(2Δd/a). Horizontal motion is constant speed, so the horizontal distance is x = vₓt.
Check the units at the end, then record the answer as a.bc × 10ⁿ with its unit and three digits.
Example
An alpha particle (q = 3.20 × 10⁻¹⁹ C, m = 6.65 × 10⁻²⁷ kg) enters horizontally at 2.00 × 10⁵ m/s beside the top plate of a pair of plates 0.0260 m apart with 600 V across them. The top plate is positive and the bottom plate is negative, so the alpha particle is pushed toward the bottom plate and lands on it. Find the horizontal distance it travels. Record the answer as a.bc × 10ⁿ m.
- E = ΔV/Δd = 600 ÷ 0.0260 = 2.31 × 10⁴ V/m.
- a = qE/m = (3.20 × 10⁻¹⁹)(2.31 × 10⁴) ÷ (6.65 × 10⁻²⁷) = 1.11 × 10¹² m/s².
- Vertically, Δd = ½at², so t = √(2 × 0.0260 ÷ (1.11 × 10¹²)) = 2.164 × 10⁻⁷ s.
- x = vₓt = (2.00 × 10⁵)(2.164 × 10⁻⁷) = 4.328 × 10⁻² m, which is 4.33 × 10⁻² m. Record 4.33 × 10⁻².
Try it
An electron (q = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) enters horizontally at 5.00 × 10⁶ m/s beside the top plate of a pair of plates 0.0200 m apart with 100 V across them. The top plate is negative and the bottom plate is positive, so the electron is pulled toward the bottom plate and lands on it. Find the horizontal distance it travels.
- E = ΔV/Δd = 100 ÷ 0.0200 = 5.00 × 10³ V/m.
- a = qE/m = (1.60 × 10⁻¹⁹)(5.00 × 10³) ÷ (9.11 × 10⁻³¹) = 8.78 × 10¹⁴ m/s².
- Vertically, Δd = ½at², so t = √(2 × 0.0200 ÷ (8.78 × 10¹⁴)) = 6.7497 × 10⁻⁹ s.
- x = vₓt = (5.00 × 10⁶)(6.7497 × 10⁻⁹) = 3.3749 × 10⁻² m, which is 3.37 × 10⁻² m.
Slide 7 of 7 · Still charges: the oil-drop experiment
Key ideas
A drop that hangs still has no net force. The electric force up equals the weight down: qE = mg. So q = mg ÷ E. Find the field first: E = ΔV ÷ Δd.
Count the extra electrons with n = q ÷ e, where e = 1.60 × 10⁻¹⁹ C. Electrons are counted, so n is a whole number. Use g = 9.81 m/s².
The field points from the positive plate to the negative plate. A drop pushed against the field is negative. A negative drop has extra electrons.
Millikan found that every measured charge was a whole-number multiple of e: q = n × e. A value that gives a fraction when divided by e cannot be right. Charge comes in units.
Example
An oil drop of mass 1.96 × 10⁻¹⁵ kg hangs still between plates 0.0100 m apart with 400 V across them. The top plate is positive. Find the charge on the drop and the number of extra electrons. (g = 9.81 m/s², e = 1.60 × 10⁻¹⁹ C)
- E = ΔV ÷ Δd = 400 ÷ 0.0100 = 4.00 × 10⁴ N/C.
- mg = (1.96 × 10⁻¹⁵)(9.81) = 1.9228… × 10⁻¹⁴ N.
- qE = mg, so q = mg ÷ E = 1.9228… × 10⁻¹⁴ ÷ (4.00 × 10⁴) = 4.807 × 10⁻¹⁹ C.
- n = q ÷ e = 4.807 × 10⁻¹⁹ ÷ (1.60 × 10⁻¹⁹) = 3.004…, so 3 extra electrons. The force is up and the field is down, so the drop is negative.
Try it
NEW, for teacher review. A drop of mass 3.26 × 10⁻¹⁵ kg hangs still between plates 0.0200 m apart with 500 V across them. The top plate is positive. Find the charge on the drop and the number of extra electrons. (g = 9.81 m/s², e = 1.60 × 10⁻¹⁹ C)
- E = ΔV ÷ Δd = 500 ÷ 0.0200 = 2.50 × 10⁴ N/C.
- mg = (3.26 × 10⁻¹⁵)(9.81) = 3.1981… × 10⁻¹⁴ N.
- q = mg ÷ E = 3.1981… × 10⁻¹⁴ ÷ (2.50 × 10⁴) = 1.279… × 10⁻¹⁸ C.
- n = q ÷ e = 1.2792… × 10⁻¹⁸ ÷ (1.60 × 10⁻¹⁹) = 7.995…, so 8 extra electrons.
Answer the practice problems online · Completed notes and worked key
B8-N01
B8-N01. A charged ball (m = 3.00 × 10⁻⁴ kg) is released from rest where its electric potential energy is 5.0 × 10⁻⁶ J. At another point its electric potential energy is 8.0 × 10⁻⁷ J. Find its speed there.
- Givens: v₀ = 0; Eₚ₁ = 5.0 × 10⁻⁶ J; Eₚ₂ = 8.0 × 10⁻⁷ J; m = 3.00 × 10⁻⁴ kg. Question: v.
- Eₖ = Eₚ₁ − Eₚ₂ = 4.2 × 10⁻⁶ J.
- v = √(2Eₖ/m) = √(2(4.2 × 10⁻⁶) ÷ (3.00 × 10⁻⁴)) = 0.167 m/s.
- Answer: 0.167 m/s
B8-N02
B8-N02. A proton enters a uniform field between horizontal plates moving parallel to the plates. Which statement describes its motion?
- Constant velocity parallel to the plates and constant acceleration across them
- Constant acceleration in both directions
- Constant velocity in both directions
- Velocity changes parallel to the plates only
- Givens: entry parallel to the plates, field across the plates. Question: the motion.
- The force is across the plates only, so the parallel component has no force and keeps constant speed; the perpendicular component accelerates.
- Answer: A. Constant velocity parallel to the plates and constant acceleration across them
B8-N03
B8-N03. Name the shape of the path of a charged particle that enters a uniform electric field at right angles to the field. Explain with one sentence about each direction.
- Givens: entry at right angles to a uniform field. Question: path shape and reason.
- The path is a parabola.
- Parallel to the plates the speed is constant, and across the plates the acceleration is constant, as for a ball thrown horizontally.
B8-N04
B8-N04. An electron has an acceleration of 4.00 × 10¹⁵ m/s² between plates 0.0250 m apart. Find the potential difference between the plates.
- Givens: a = 4.00 × 10¹⁵ m/s²; Δd = 0.0250 m; q = 1.60 × 10⁻¹⁹ C; m = 9.11 × 10⁻³¹ kg. Question: ΔV.
- F = ma = qE, so E = ma/q.
- E = 2.2775 × 10⁴ V/m, then ΔV = EΔd = 569 V.
- Answer: 569 V
B8-N05
B8-N05. An electron enters horizontally at 5.00 × 10⁶ m/s beside one plate. The plates are 0.120 m long. How long does the electron take to cross the plates?
- Givens: v₀ₓ = 5.00 × 10⁶ m/s; Δx = 0.120 m. Question: t.
- No horizontal force, so Δx = vt.
- t = Δx ÷ v = 0.120 ÷ (5.00 × 10⁶) = 2.40 × 10⁻⁸ s.
- Answer: 2.40 × 10⁻⁸ s
B8-N06
B8-N06. Use the electron from the previous question. It just reaches the far end of the other plate, so it moves 0.0500 m across the gap during that time. Find the potential difference between the plates.
- Givens: t = 2.40 × 10⁻⁸ s; Δy = 0.0500 m across the plates; q = 1.60 × 10⁻¹⁹ C; m = 9.11 × 10⁻³¹ kg; vᵧ₀ = 0. Question: ΔV.
- Vertical motion: Δy = ½at², so a = 2Δy/t² = 1.74 × 10¹⁴ m/s².
- F = ma, E = F/q, ΔV = EΔd with Δd = 0.0500 m: ΔV = 49.4 V.
- Answer: 49.4 V
B8-N07
B8-N07. In the previous two questions, name the principles you used in order. Give one principle that also describes the event but you did not need.
- Givens: the two-step problem above. Question: order of the principles and one unused principle.
- 1) Constant horizontal velocity gave the time. 2) Constant acceleration across the plates gave a. 3) Newton’s second law with F = qE gave E, then E = ΔV/Δd gave the voltage.
- Energy conservation also describes the event, but it would need the final speed, which this question did not give.