B8 · Worked examples
These questions use energy conservation for a charge in a field. They also cover a charge that enters a field sideways, where you treat the horizontal and vertical motion separately.
Open the B8 lesson · B8 notes and practice
Method slides in this lesson: “Method: how to solve a two-direction problem”. Find them in the lesson slides, with the steps for each skill in one place.
Worked question types
Each example shows every step, why you do it, and the idea behind it.
Question typeUse conservation of energy to find a speed and to compare two points
Use this when: A charged object is released from rest in a uniform field. The question gives its electric potential energy at different points.
Example. A charged ball (m = 2.50 × 10⁻⁴ kg) is released from rest at A, where its electric potential energy (Ep) is 6.0 × 10⁻⁷ J. At B its electric potential energy is 4.0 × 10⁻⁸ J. At C it is 2.0 × 10⁻⁷ J. Find its speed at B. Is it moving faster at B or at C?
- Write conservation of energy.
Ep is electric potential energy and Ek is kinetic energy, as in B6. “A” and “B” name the two points. Only the electric force does work, so the total energy stays the same.
Ep A + Ek A = Ep B + Ek B
- Use "from rest".
The ball starts at rest, so Ek at A is zero.
Ek A = 0
- Find the kinetic energy at B.
Ek at B = Ep at A − Ep at B. It is the potential energy that was lost.
Ek B = 6.0 × 10⁻⁷ − 4.0 × 10⁻⁸ = 5.60 × 10⁻⁷ J
- Find the speed at B.
Use the mass of the ball, not the mass of an electron. The charge is not needed.
v = √(2 × 5.60 × 10⁻⁷ ÷ (2.50 × 10⁻⁴)) = 0.0669 m/s
- Find the kinetic energy at C.
The same idea gives Ek at C = Ep at A − Ep at C, the energy lost between A and C.
Ek C = 6.0 × 10⁻⁷ − 2.0 × 10⁻⁷ = 4.00 × 10⁻⁷ J
- Compare the energies.
The same ball has the same mass, so more kinetic energy means more speed.
5.60 × 10⁻⁷ J is greater than 4.00 × 10⁻⁷ J
Why this works. The electric potential energy that the ball loses becomes kinetic energy. The more potential energy it has lost, the faster it goes. Compare energies when you only need to say which point is faster.
Check your answer. B has the least potential energy, so the ball has lost the most there. It should be fastest at B.
Common mistake. Using the charge in the speed equation. The kinetic energy is ½mv², so you need the mass.
Answer: v at B = 0.0669 m/s. The ball is faster at B.
Question typeDescribe the motion of a charge that enters a field sideways
Use this when: A charge enters the field between plates moving parallel to the plates. The question asks you to describe or compare the horizontal and vertical motion, or to name the path.
Method slide in the lesson: “Method: how to solve a two-direction problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. An electron enters the uniform field between two horizontal plates, moving parallel to them. The top plate is negative and the bottom plate is positive. Gravity is negligible. Describe the horizontal motion and the vertical motion. Name the shape of the path.
- Find the force.
The only force is the electric force. It is perpendicular to the plates. A negative charge is pulled toward the positive plate, and a positive charge is pushed toward the negative plate.
F on the electron points toward the positive plate: down
- Do the horizontal column.
There is no force along the plates. A net force of zero means zero acceleration, so the velocity is constant.
net force 0 a = 0 vₓ constant uniform motion
- Do the vertical column.
The field is uniform, so the electric force is constant. By Newton’s second law, the acceleration is constant.
constant force constant a v_y grows from zero uniformly accelerated motion
- Put the columns together.
Constant speed in one direction and steadily growing speed in the other make a curved path.
a parabola
Why this works. Motion in one direction does not need a force in that direction. The two directions are independent. A force across the path changes only the speed across the path.
Check your answer. Compare it with a ball rolling off a table. It keeps moving forward while gravity pulls it down. Here the pull is electric.
Common mistake. Saying the horizontal speed changes because the electron is moving sideways. There is no force sideways, so there is no change.
Answer: Horizontal: net force zero, constant velocity, uniform motion. Vertical: constant force, constant acceleration, uniformly accelerated motion. The path is a parabola.
Question typeCompare the paths of an electron and a proton in the same field
Use this when: The question changes the particle and asks how the path changes in direction and in how sharply it bends.
Method slide in the lesson: “Method: how to solve a two-direction problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. An electron enters the uniform field between two plates and bends toward the bottom plate. The top plate is negative and the bottom plate is positive. A proton enters at the same speed beside the top plate. The field is 1.00 × 10³ N/C. Use q = 1.60 × 10⁻¹⁹ C, m(electron) = 9.11 × 10⁻³¹ kg and m(proton) = 1.67 × 10⁻²⁷ kg. Compare the two paths.
- Find the direction for the proton.
A positive charge is pushed toward the negative plate, and a negative charge is pulled toward the positive plate. The proton is positive, so it goes to the negative top plate. The electron went the other way.
the proton bends up
- Compare the forces.
The charges have the same size, so the forces are equal in size.
F = qE for both
- Find the electron’s acceleration.
Use a = qE/m.
a = (1.60 × 10⁻¹⁹)(1.00 × 10³) ÷ (9.11 × 10⁻³¹) = 1.76 × 10¹⁴ m/s²
- Find the proton’s acceleration.
Use the proton mass.
a = (1.60 × 10⁻¹⁹)(1.00 × 10³) ÷ (1.67 × 10⁻²⁷) = 9.58 × 10¹⁰ m/s²
- Compare the sizes.
The proton’s mass is bigger, so its acceleration is smaller.
1833 times smaller
- Say what that does to the path.
A smaller acceleration means the path bends less.
the proton’s parabola is much flatter
Why this works. The force depends on the charge and the field. The acceleration also depends on the mass. A particle with a larger mass has a smaller acceleration from the same force, so its path bends less.
Check your answer. The ratio of the accelerations should be the ratio of the masses, 1.67 × 10⁻²⁷ ÷ (9.11 × 10⁻³¹), which is about 1830.
Common mistake. Saying the proton has a smaller force because it is "heavier". The forces are equal. Only the acceleration is smaller.
Answer: The proton bends the opposite way, toward the negative plate. Its acceleration (9.58 × 10¹⁰ m/s²) is 1833 times smaller, so its path is flatter. Both paths are parabolas.
Question typeGo from an acceleration back to the potential difference
Use this when: The question gives the acceleration of a particle between plates and the gap. It asks for the voltage.
Method slide in the lesson: “Method: how to solve a two-direction problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. An electron (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C) has an acceleration of 2.00 × 10¹⁵ m/s² between two plates. The plates are 0.0450 m apart. Find the potential difference between the plates.
- Write the chain first.
You want ΔV. E = ΔV/Δd needs the field; multiply both sides by Δd to get ΔV = EΔd. E = F/q needs the force, where q is the charge that feels it (use the electron’s size, 1.60 × 10⁻¹⁹ C). F = ma gives the force.
a → F → E → ΔV
- Find the force.
The electric force is the only force, so it is the net force.
F = ma = (9.11 × 10⁻³¹)(2.00 × 10¹⁵) = 1.82 × 10⁻¹⁵ N.
- Find the field.
Divide the force by the charge.
E = F ÷ q = 1.82 × 10⁻¹⁵ ÷ (1.60 × 10⁻¹⁹) = 1.138 × 10⁴ N/C
- Find the voltage.
Multiply the field by the gap.
ΔV = EΔd = (1.138 × 10⁴)(0.0450) = 512 V
Why this works. Each equation links three quantities, so each step is one small calculation. The energy method does not work here, because the energy is not given.
Check your answer. Check the other way. A voltage of 512 V across 0.0450 m gives E = 1.14 × 10⁴ V/m, and a = qE/m gives about 2.00 × 10¹⁵ m/s².
Common mistake. Using ΔV = ΔEp/q. No energy is given, so use the chain through the force.
Answer: 512 V
Question typeFind the voltage that makes a charge just reach the end of a plate
Use this when: A charge enters sideways and just reaches the far end of the opposite plate. The question gives lengths and the entry speed and asks for the voltage.
Method slide in the lesson: “Method: how to solve a two-direction problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. An electron enters horizontally at 3.50 × 10⁶ m/s beside one plate. The plates are 0.0900 m long and 0.0350 m apart. The electron just reaches the far end of the other plate. The top plate is negative and the bottom plate is positive. L is the plate length and Δd is the gap. Use m = 9.11 × 10⁻³¹ kg and q = 1.60 × 10⁻¹⁹ C. Find the potential difference between the plates.
- Set up two columns.
The time is the same in both directions. It connects them.
horizontal: uniform motion vertical: uniform acceleration
- Find the time from the horizontal column.
There is no horizontal force, so the speed is constant. Time = distance ÷ speed.
t = L ÷ vₓ = 0.0900 ÷ (3.50 × 10⁶) = 2.5714 × 10⁻⁸ s
- Find the acceleration from the vertical column.
Δd = vᵢt + ½at². The vertical starting speed vᵢ is 0, so the first term is zero and Δd = ½at². Rearrange for a. The electron starts beside one plate and just reaches the end of the other, so the vertical distance it moves is the gap, Δd.
a = 2Δd ÷ t² = 2(0.0350) ÷ (2.5714 × 10⁻⁸)² = 1.0587 × 10¹⁴ m/s²
- Find the force.
The electric force is the net force.
F = ma = (9.11 × 10⁻³¹)(1.0587 × 10¹⁴) = 9.64 × 10⁻¹⁷ N
- Find the field.
Divide by the charge.
E = F ÷ q = 9.64 × 10⁻¹⁷ ÷ (1.60 × 10⁻¹⁹) = 603 N/C
- Find the voltage.
Multiply by the gap.
ΔV = EΔd = (603)(0.0350) = 21.1 V
- Name the principles in order.
A diploma answer says which ideas you used, and in what order.
uniform motion, then uniform acceleration
Why this works. Horizontal motion has no force, so it is uniform. Vertical motion has a constant force, so it is uniformly accelerated. The time links the two. Then the chain a → F → E → ΔV gives the voltage.
Check your answer. This is the greatest voltage that lets the electron escape the plates. A bigger voltage gives a bigger acceleration, so the electron would hit the plate before it reached the end.
Common mistake. Using the plate length as the vertical distance. The electron falls through the gap, 0.0350 m, while it travels the length.
Answer: 21.1 V
Question typeFind the speed and the direction of a charge as it leaves the plates
Use this when: A charge has crossed the plates. The question asks for its speed and the angle of its velocity when it leaves.
Method slide in the lesson: “Method: how to solve a two-direction problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. The electron in the last question entered at 3.50 × 10⁶ m/s. Its vertical acceleration is 1.06 × 10¹⁴ m/s² and it moves 0.0350 m vertically as it crosses the plates. Find its speed as it leaves the plates and the angle of its velocity to the horizontal.
- Keep the two directions apart.
The horizontal speed does not change.
vₓ = 3.50 × 10⁶ m/s
- Find the vertical speed.
v_y is the vertical speed. Use v² = vᵢ² + 2ad. The vertical starting speed vᵢ is 0, so v_y² = 2ad, where d is the vertical distance, 0.0350 m.
v_y = √(2 × 1.06 × 10¹⁴ × 0.0350) = 2.72 × 10⁶ m/s
- Combine the two parts.
They are at right angles, so the speed is the hypotenuse of a right triangle.
v = √((3.50 × 10⁶)² + (2.72 × 10⁶)²) = 4.43 × 10⁶ m/s
- Find the angle.
Use the tangent: vertical over horizontal.
θ = tan⁻¹(2.72 × 10⁶ ÷ (3.50 × 10⁶)) = 37.9°
- Say which way.
The electron bends toward the positive plate. The angle is from the horizontal.
37.9° from the horizontal, toward the positive plate
Why this works. The final speed is a vector sum of two independent parts. The vertical speed alone is not the speed. The horizontal part is still there.
Check your answer. The final speed must be greater than the entry speed, because the vertical part adds to it.
Common mistake. Giving the vertical speed as the final speed. Combine it with the horizontal speed.
Answer: 4.43 × 10⁶ m/s at 37.9° from the horizontal, toward the positive plate
Question typeFind where a charge lands on a plate
Use this when: The charge starts beside one plate and lands on the other. The question asks for the horizontal distance.
Method slide in the lesson: “Method: how to solve a two-direction problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. A proton enters horizontally at 1.50 × 10⁵ m/s beside the top plate. The plates are 0.0200 m apart with 400 V across them. The bottom plate is negative, so the proton is pulled to it. Use q = 1.60 × 10⁻¹⁹ C and m = 1.67 × 10⁻²⁷ kg. How far does it travel horizontally before it lands?
- Find the field.
The voltage and the gap give the field.
E = ΔV ÷ Δd = 400 ÷ 0.0200 = 2.00 × 10⁴ V/m
- Find the acceleration.
The electric force is the net force. Use the proton mass.
a = qE ÷ m = (1.60 × 10⁻¹⁹)(2.00 × 10⁴) ÷ (1.67 × 10⁻²⁷) = 1.92 × 10¹² m/s²
- Find the time to cross the gap.
Δd = vᵢt + ½at². The vertical starting speed vᵢ is 0, so Δd = ½at². Rearrange for t.
t = √(2Δd ÷ a) = √(2 × 0.0200 ÷ (1.92 × 10¹²)) = 1.4434 × 10⁻⁷ s
- Use the time in the horizontal column.
The horizontal speed is constant, so distance = speed × time.
x = vₓt = (1.50 × 10⁵)(1.4434 × 10⁻⁷) = 0.0217 m
Why this works. Time is the link between the two directions. Vertical motion sets how long the proton is between the plates. Horizontal motion then tells you how far it goes in that time.
Check your answer. The answer should be small, because the plates are close together and the proton is pulled strongly.
Common mistake. Using the speed to find the time with the gap. The time comes from the vertical motion. The speed is horizontal.
Answer: 0.0217 m
Diploma-style questions
Try each question first. Then open the worked solution.
Multiple choice · outcome 30-B2.8kA proton enters the uniform field between two horizontal plates, moving parallel to the plates. Gravity is negligible. Which statement describes its motion?
- A. Constant acceleration in both directions, and a straight path
- B. Constant velocity horizontally, constant acceleration vertically, and a parabolic path
- C. Constant velocity horizontally, constant velocity vertically, and a straight path
- D. Constant acceleration horizontally, constant velocity vertically, and a parabolic path
Show the worked solution (try the question first)
- Find the horizontal motion.
There is no force along the plates.
constant velocity
- Find the vertical motion.
The uniform field gives a constant force across the plates, so the acceleration is constant.
constant acceleration
- Name the path.
Uniform motion in one direction with uniform acceleration in the other gives a parabola.
choice B
Why each choice is right or wrong
- A. There is no horizontal force, so the horizontal acceleration is zero.
- B. Correct. There is no force along the plates. The force across them is constant, so the path is a parabola.
- C. The vertical velocity changes because a force acts across the plates.
- D. This reverses the two directions. The force is across the plates, not along them.
Answer: B
Numerical response · outcome 30-B2.8kAn electron has an acceleration of 3.20 × 10¹⁵ m/s² between two parallel plates that are 0.0300 m apart. Use m = 9.11 × 10⁻³¹ kg and q = 1.60 × 10⁻¹⁹ C. Find the potential difference between the plates. Record your answer as a.bc × 10ⁿ V. Enter the digits a, b, c, and then n.
Show the worked solution (try the question first)
- Write the chain.
The acceleration gives the force, the force gives the field, and the field gives the voltage.
a → F → E → ΔV
- Find the force.
The electric force is the net force.
F = ma = (9.11 × 10⁻³¹)(3.20 × 10¹⁵) = 2.915 × 10⁻¹⁵ N
- Find the field.
Divide by the charge.
E = F ÷ q = 1.822 × 10⁴ N/C
- Find the voltage.
Multiply by the gap.
ΔV = EΔd = (1.822 × 10⁴)(0.0300) = 546.6 V
- Enter the digits.
a, b, c are 5, 4, 7 and n is 2.
record 5 4 7 2
Answer: 547 V. Record 5 4 7 2.
Numerical response · outcome 30-B2.9kA charged ball with a mass of 1.00 × 10⁻⁵ kg is released from rest in a uniform field. Its electric potential energy is 9.0 × 10⁻⁶ J at the start. At a later point it is 1.5 × 10⁻⁶ J. Find its speed at the later point. Record your answer as a.bc × 10ⁿ m/s. Enter the digits a, b, c, and then n.
Show the worked solution (try the question first)
- Write conservation of energy.
Only the electric force does work, so the total energy stays the same.
Ep start + Ek start = Ep later + Ek later
- Use "from rest".
The starting kinetic energy is zero.
Ek start = 0
- Find the kinetic energy later.
It is the potential energy that was lost.
Ek = 9.0 × 10⁻⁶ − 1.5 × 10⁻⁶ = 7.50 × 10⁻⁶ J
- Find the speed.
Use ½mv² with the mass of the ball.
v = √(2 × 7.50 × 10⁻⁶ ÷ (1.00 × 10⁻⁵)) = 1.22 m/s
- Enter the digits.
a, b, c are 1, 2, 2 and n is 0.
record 1 2 2 0
Answer: 1.22 m/s. Record 1 2 2 0.