B8 · Energy conservation and 2-D motion of charges · Notes and practice
Download the printable PDF
Use energy conservation, then split a sideways-entering charge into constant-speed and accelerated motion.
Open the complete lesson
Method slides in this lesson: “Method: how to solve a two-direction problem”. Worked examples for each question type in B8
After the lesson: Investigate and connect (a short investigation, a data step and a real-world link)
Type in the blanks; your notes save on this device only. Nothing is submitted.
Slide 1 of 7 · Energy conservation for a charge in a field
Key ideas
Ep means electric potential energy and Ek means kinetic energy, as in B6. “At A” and “at B” name the two points. Only the electric force does work, so total energy : Ep(A) + Ek(A) = .
If the charge starts , Ek(A) = 0, so Ek(B) = . The potential energy lost becomes .
Then ½mv² = Ek, so v = . Use the object’s own (the ball’s, not an electron’s).
The charge q is not needed when the energies are given. To compare speeds at two points, compare the : more kinetic energy means more speed for the same mass.
Example
A charged pith ball (m = 2.00 × 10⁻⁴ kg, q = 1.5 × 10⁻⁸ C) is held at A in a uniform field with 4.0 × 10⁻⁷ J of electric potential energy, then released. At B it has 2.5 × 10⁻⁸ J of electric potential energy. Find its speed at B.
Try it
The same pith ball is released from rest at A, which has 4.0 × 10⁻⁷ J of electric potential energy. It reaches a point C where its electric potential energy is 1.0 × 10⁻⁷ J. Find its kinetic energy at C and say whether its speed there is greater or less than at B (where Ek = 3.75 × 10⁻⁷ J).
Slide 2 of 7 · A charge entering a uniform field sideways
Key ideas
A charge entering a field sideways is like a ball rolling off a table: it keeps moving forward while a pulls it down. Here the force is , and gravity is too small to matter. The horizontal speed vₓ is the speed .
The electric force is at to the plates and points toward the plate of the opposite sign (an electron toward the plate). Motion does not need a force in its own direction.
The two directions do not each other. Horizontal: net force , acceleration zero, constant velocity vₓ, motion. Vertical: constant force, constant acceleration a = , speed grows from zero, motion.
Together these make a . In explanations say “net force zero” or “constant force” in each direction.
Example
An electron enters the uniform field between parallel plates moving horizontally with speed vₓ. Gravity is too small to matter. The top plate is negative and the bottom plate is positive. Complete the table for horizontal and vertical motion (net force, acceleration, velocity, motion type), then name the shape of the path.
Try it
A proton enters the same field at the same horizontal speed as the electron, beside the top plate (negative top, positive bottom). Compare the proton’s path with the electron’s path in direction and in how sharply it bends.
Slide 3 of 7 · From acceleration back to voltage
Key ideas
To go from motion back to voltage, work the chain backward from what you want, then forward with numbers. The electric force is the only force, so F = .
Then E = , where q is the charge that feels the force (use the electron’s size, 1.60 × 10⁻¹⁹ C; the direction is found separately), and then ΔV = (multiply both sides of E = ΔV/Δd by Δd). Each formula has three quantities, so each step is one , with units.
Write the chain of formulas , before any numbers: a → F → E → ΔV. Use the electron’s mass and charge from the data sheet.
Never use ΔV = ΔEp/q here: the is not given.
Example
An electron (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C) between parallel plates has an acceleration of 3.00 × 10¹⁵ m/s². The plates are 0.0360 m apart. Find the potential difference between the plates.
Try it
An electron (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C) has an acceleration of 2.50 × 10¹⁵ m/s² between plates 0.0480 m apart. Find the potential difference between the plates.
Slide 4 of 7 · The full two-direction problem
Key ideas
L is the and Δd is the . Time is the between the two directions. Horizontal motion is uniform: t = .
Vertically Δd = vᵢt + ½at², and the vertical starting speed vᵢ is , so Δd = , which gives a = . Then run the chain: F = , E = , ΔV = .
“Just reaches the far end of the other plate” means the particle starts beside one plate and covers the full gap Δd (the vertical distance) in the time t. This is the greatest voltage that lets the electron escape: a bigger voltage gives a bigger acceleration, and the electron would hit the plate . Set up two columns, horizontal and vertical, and fill in what you know in each.
For the final speed, the vertical speed is v_y = (from v² = vᵢ² + 2ad with vᵢ = 0, and d the vertical distance); combine it with vₓ as two sides of a right triangle: v = , angle θ = tan⁻¹(), measured from the . Name the principles in order: uniform motion, then uniform acceleration.
Example
An electron enters horizontally at vₓ = 4.00 × 10⁶ m/s beside one plate. The plates are L = 0.100 m long and Δd = 0.0400 m apart. It just reaches the far end of the other plate. Find the potential difference between the plates. (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C)
Try it
An electron enters horizontally at 3.00 × 10⁶ m/s beside one plate. The plates are 0.0800 m long and 0.0300 m apart, and it just reaches the far end of the other plate. Find the potential difference between the plates, and name the two physics principles you used, in order.
Slide 5 of 7 · Method: how to solve a two-direction problem
Key ideas
Step 1, : make an x column (along the plates, ) and a y column (across the plates, ).
Step 2, : write what you know in each column. A sideways entry means the across speed at the start is .
Step 3, : time is the between the two columns. Get it from the column with enough numbers: t = .
Step 4, : across the plates, Δd = , F = , E = and ΔV = . Use the chain forwards or backwards.
Step 5, : v_y = . Then v = and the angle = from the horizontal.
Check: vₓ never changes and v_y grows with time, so the final speed must be .
Example
An electron enters horizontally at vₓ = 4.00 × 10⁶ m/s beside one plate. The plates are L = 0.100 m long and Δd = 0.0400 m apart, and it just reaches the far end of the other plate. Use the five steps to find the potential difference between the plates, then the final speed and the angle. (m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C)
Try it
NEW, for teacher review. An electron enters horizontally at 2.50 × 10⁶ m/s beside one plate. The plates are 0.0600 m long and 0.0150 m apart, and it just reaches the far end of the other plate. Use the five steps to find the potential difference between the plates and the final speed.
Slide 6 of 7 · Where does the particle land?
Key ideas
A long numerical response is worth doing in order, with each result : field, force, acceleration, time, distance.
Field from the voltage and the gap: E = . Acceleration with the particle’s own charge and mass: a = .
Vertical motion starts at zero vertical speed and covers the gap: Δd = , so t = . Horizontal motion is constant speed, so the horizontal distance is x = .
Check the units at the end, then record the answer as with its unit and three digits.
Example
An alpha particle (q = 3.20 × 10⁻¹⁹ C, m = 6.65 × 10⁻²⁷ kg) enters horizontally at 2.00 × 10⁵ m/s beside the top plate of a pair of plates 0.0260 m apart with 600 V across them. The top plate is positive and the bottom plate is negative, so the alpha particle is pushed toward the bottom plate and lands on it. Find the horizontal distance it travels. Record the answer as a.bc × 10ⁿ m.
Try it
An electron (q = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) enters horizontally at 5.00 × 10⁶ m/s beside the top plate of a pair of plates 0.0200 m apart with 100 V across them. The top plate is negative and the bottom plate is positive, so the electron is pulled toward the bottom plate and lands on it. Find the horizontal distance it travels.
Slide 7 of 7 · Still charges: the oil-drop experiment
Key ideas
A drop that hangs still has . The electric force equals the weight : qE = . So q = . Find the field first: E = .
Count the extra electrons with n = , where e = . Electrons are counted, so n is a . Use g = .
The field points from the positive plate to the negative plate. A drop pushed the field is negative. A negative drop has electrons.
Millikan found that every measured charge was a whole-number multiple of : q = . A value that gives a when divided by e cannot be right. Charge comes in .
Example
An oil drop of mass 1.96 × 10⁻¹⁵ kg hangs still between plates 0.0100 m apart with 400 V across them. The top plate is positive. Find the charge on the drop and the number of extra electrons. (g = 9.81 m/s², e = 1.60 × 10⁻¹⁹ C)
Try it
NEW, for teacher review. A drop of mass 3.26 × 10⁻¹⁵ kg hangs still between plates 0.0200 m apart with 500 V across them. The top plate is positive. Find the charge on the drop and the number of extra electrons. (g = 9.81 m/s², e = 1.60 × 10⁻¹⁹ C)
Answer the practice problems online · Completed notes and worked key
B8-N01
B8-N01. A charged ball (m = 3.00 × 10⁻⁴ kg) is released from rest where its electric potential energy is 5.0 × 10⁻⁶ J. At another point its electric potential energy is 8.0 × 10⁻⁷ J. Find its speed there.
Response: ____________________
B8-N02
B8-N02. A proton enters a uniform field between horizontal plates moving parallel to the plates. Which statement describes its motion?
- Constant velocity parallel to the plates and constant acceleration across them
- Constant acceleration in both directions
- Constant velocity in both directions
- Velocity changes parallel to the plates only
Response: ____________________
B8-N03
B8-N03. Name the shape of the path of a charged particle that enters a uniform electric field at right angles to the field. Explain with one sentence about each direction.
Response: ____________________
B8-N04
B8-N04. An electron has an acceleration of 4.00 × 10¹⁵ m/s² between plates 0.0250 m apart. Find the potential difference between the plates.
Response: ____________________
B8-N05
B8-N05. An electron enters horizontally at 5.00 × 10⁶ m/s beside one plate. The plates are 0.120 m long. How long does the electron take to cross the plates?
Response: ____________________
B8-N06
B8-N06. Use the electron from the previous question. It just reaches the far end of the other plate, so it moves 0.0500 m across the gap during that time. Find the potential difference between the plates.
Response: ____________________
B8-N07
B8-N07. In the previous two questions, name the principles you used in order. Give one principle that also describes the event but you did not need.
Response: ____________________