B6 · Potential difference: energy per charge · Notes and practice
Download the printable PDF
Explain potential difference as energy per charge, use ΔE = qΔV, and use the electron volt.
Open the complete lesson
Method slides in this lesson: “Method: how to solve an energy-per-charge problem” · “Method: how to find the speed of a charge accelerated through a voltage”. Worked examples for each question type in B6
After the lesson: Investigate and connect (a short investigation, a data step and a real-world link)
Type in the blanks; your notes save on this device only. Nothing is submitted.
Slide 1 of 7 · Work that stores energy between plates
Key ideas
A positive particle against the plate is where it wants to be, so we call its electric potential energy (written Ep) there, like a ball at the bottom of a hill.
To carry it toward the other plate something outside must push, because the plates pull and push it . Our push does .
The speed stays constant, so none of the work becomes . the work is stored as electric potential energy: ΔEp = 6.0 × 10⁻¹⁶ J in the example, where Δ means . When released, Ep decreases and the same amount becomes kinetic energy, written Ek.
The positive plate a positive charge away and the negative plate it in.
Example
A positive particle with q = 4.0 × 10⁻¹⁷ C is carried at constant speed from the negative top plate (A) to B, gaining 6.0 × 10⁻¹⁶ J of electric potential energy. It is released from rest and gravity is too small to matter. Which way does it move, and how much kinetic energy does it have when it reaches the top plate?
Try it
The same positive particle is held at B, with 6.0 × 10⁻¹⁶ J of electric potential energy, and is carried at constant speed back to the negative top plate at A. Does its electric potential energy increase or decrease, by how much, and what is its potential energy at A?
Slide 2 of 7 · Potential difference: energy per charge
Key ideas
A bigger charge stores more energy, so divide out the charge. Electric potential difference is ΔV = : ΔE is the (J) and q is the (C).
Its unit is (joules per coulomb). ΔV belongs to the , not the particle: a charge three times as big stores three times the energy, and ΔE ÷ q gives the ΔV.
Rearrange for the unknown: ΔE = . Put in the size of the charge, then ask which way it moves: moving toward the plate that attracts it means it . If the plates do not change, ΔV stays the for a new charge.
On a graph of ΔE against q, ΔE = qΔV matches y = mx, so the slope is . The line passes through the , because zero charge stores zero energy. Check powers of ten, since the charges are very small.
Example
On other plates, a charge q = 6.0 × 10⁻¹⁸ C stores 1.8 × 10⁻¹⁶ J when moved from A to B. Find the potential difference between A and B, then find the energy stored when a charge of 1.5 × 10⁻¹⁷ C is moved between the same two points.
Try it
The same plates move several charges from A to B, and the energy stored is graphed against the charge. The line passes through C = (2.0 × 10⁻¹⁸ C, 0.60 × 10⁻¹⁶ J) and D = (8.0 × 10⁻¹⁸ C, 2.40 × 10⁻¹⁶ J). What does the slope represent, and what is its value?
Slide 3 of 7 · Method: how to solve an energy-per-charge problem
Key ideas
Step 1: name the . Is it ΔE, q or ΔV? Write it before any number.
Step 2: write the equation with the unknown alone: ΔV = , ΔE = or q = .
Step 3: put in the : the size of the charge in coulombs and the energy in joules. Then ask which way it moves: toward the plate that attracts it, it gains .
Step 4: calculate with units. Joules per coulomb is the . Check: a bigger charge stores energy.
Example
A charge of 6.0 × 10⁻¹⁸ C stores 1.8 × 10⁻¹⁶ J when it is moved from A to B. A charge of 1.5 × 10⁻¹⁷ C is then moved between the same two points. Find the potential difference, then the energy stored for the new charge.
Try it
A charge of 2.5 × 10⁻¹⁷ C stores 1.0 × 10⁻¹⁵ J when it is moved between two plates. Find the potential difference between the plates, then the energy stored when a charge of 8.0 × 10⁻¹⁸ C is moved between the same plates.
Slide 4 of 7 · The volt: one joule per coulomb
Key ideas
One volt is one : 1 V = . “Voltage” is just . A battery label such as 9.0 V means ΔV = in an equation. Unlike the field E, ΔV has .
A 9.0 V battery gives to each coulomb that passes through it. A battery does not store charge to hand out; it supplies for each coulomb already in the wires.
Pick the form that matches the unknown: energy from charge, ΔE = ; charge from energy, q = . The unit V can always be swapped for .
Example
A battery is labelled 9.0 V and is connected to a heating coil. A charge of 4.0 C flows through the coil. Find the energy delivered.
Try it
A 6.0 V battery is connected to a lamp. How much energy is delivered when 2.5 C of charge passes through the lamp, and how much charge must pass to deliver 90 J?
Slide 5 of 7 · A charge accelerated through a voltage
Key ideas
Voltage supplies energy and the particle turns it into speed. Rearrange ΔV = ΔE/q to ΔE = qΔV. Kinetic energy is Ek = ½mv²; the small i means and f means . Only the electric force changes the energy here, so all of qΔV becomes kinetic energy: qΔV = .
The initial term drops out only when the problem says (v_i = ). Do not drop it automatically.
From rest: v = , where Ek = qΔV. If it is already moving, find the energy ½mv_i² and the qΔV. Final Ek = start + gain, then solve for v.
Use the particle’s own q and m (electron, proton and alpha particle differ). Check: a particle sped up by the voltage must end than it started.
Example
An electron starts from rest at the negative plate of an electron gun and is accelerated through ΔV = 1.80 × 10³ V. With q = 1.60 × 10⁻¹⁹ C and m = 9.11 × 10⁻³¹ kg, find its speed at the positive plate.
Try it
An electron enters the gap at v_i = 1.50 × 10⁷ m/s and is accelerated through ΔV = 6.00 × 10² V. Find its final speed. Use q = 1.60 × 10⁻¹⁹ C and m = 9.11 × 10⁻³¹ kg.
Slide 6 of 7 · Method: how to find the speed of a charge accelerated through a voltage
Key ideas
Step 1: write the energy rule . The energy gained from the voltage becomes .
Step 2: find the energy : qΔV, with the size of the charge in coulombs and the voltage in volts. The answer is in .
Step 3: find the energy. “From rest” means ½mv_i² = . If it is already moving, work out ½mv_i² with the particle’s own .
Step 4: final Ek = start + . Then v = . Check: the unit is , and a particle sped up by the voltage ends than it began.
Example
An electron starts from rest and crosses a gap with a voltage of 1.80 × 10³ V. With q = 1.60 × 10⁻¹⁹ C and m = 9.11 × 10⁻³¹ kg, find its speed at the end.
Try it
A proton starts from rest and is accelerated through 2.00 × 10³ V. With q = 1.60 × 10⁻¹⁹ C and m = 1.67 × 10⁻²⁷ kg, find its final speed.
Slide 7 of 7 · The electron volt
Key ideas
The electron volt (eV) is a unit of , not of voltage. One eV is the energy an electron gains when accelerated through .
1 eV = qΔV = (1.60 × 10⁻¹⁹ C)(1 V) = (data sheet).
A charge of n electrons gains for each volt: an electron through 24.0 V gains eV, an alpha particle (charge 2e) through 15.0 V gains eV.
To switch units: eV × 1.60 × 10⁻¹⁹ = , and joules ÷ (1.60 × 10⁻¹⁹) = . The equation ΔE = qΔV still needs joules, coulombs and volts. Read the unit in the question first and finish in it.
Example
An alpha particle (charge 3.20 × 10⁻¹⁹ C) is accelerated from rest through 45.0 V. Find the kinetic energy it gains, first in electron volts and then in joules.
Try it
An electron enters the gap at 1.0 × 10⁶ m/s and is accelerated through 80.0 V. Find its final kinetic energy in electron volts. Record the answer as a.bc × 10ⁿ eV. Use m = 9.11 × 10⁻³¹ kg.
Answer the practice problems online · Completed notes and worked key
B6-N01
B6-N01. A charge of 5.0 × 10⁻¹⁸ C is moved between two points, and 1.5 × 10⁻¹⁶ J of energy is stored. Find the potential difference.
Response: ____________________
B6-N02
B6-N02. A 12 V battery drives 8.0 C of charge through a motor. How much energy does the battery deliver, in joules?
Response: ____________________
B6-N03
B6-N03. The potential difference between two points is 30 V. A second charge, twice as large, is moved between the same points. What is the new potential difference?
- 60 V, because the charge doubled
- 15 V, because q is in the denominator
- Zero, because the energy cancels
- 30 V, because ΔV belongs to the points and not to the charge
Response: ____________________
B6-N04
B6-N04. An electron is accelerated from rest through 3500 V. Use e = 1.60 × 10⁻¹⁹ C and electron mass mₑ = 9.11 × 10⁻³¹ kg. Find its final speed.
Response: ____________________
B6-N05
B6-N05. A particle with charge 4.80 × 10⁻¹⁹ C is accelerated from rest through 25.0 V. Find the kinetic energy it gains, in electron volts.
Response: ____________________
B6-N06
B6-N06. An electron enters a gap moving at 2.0 × 10⁷ m/s and is accelerated through 4.00 × 10² V. Find its final speed.
Response: ____________________
B6-N07
B6-N07. An electron and a proton are each accelerated from rest through the same 100 V. Which gains more kinetic energy, and which ends with the greater speed? Explain.
Response: ____________________