B6 · Worked examples

These questions link energy, charge and voltage. You use ΔV = ΔE/q to find a voltage, an energy or a charge. Then you use the energy gained to find the speed of a charged particle. Symbols: Ep is electric potential energy, Ek is kinetic energy, Δ means “change in”, and the small i and f mean initial (at the start) and final (at the end). A battery label such as 4.5 V is a potential difference, so in equations it is ΔV = 4.5 V.

Open the B6 lesson · B6 notes and practice

Method slides in this lesson: “Method: how to solve an energy-per-charge problem” · “Method: how to find the speed of a charge accelerated through a voltage”. Find them in the lesson slides, with the steps for each skill in one place.

Worked question types

Each example shows every step, why you do it, and the idea behind it.

Question type

Follow the energy of a charge that is carried and then released

Use this when: A charge is carried between plates at constant speed and then let go. The question asks which way it moves and how much kinetic energy it gets.

Example. Two parallel plates are charged. The top plate is negative and the bottom plate is positive. A positive particle with q = 5.0 × 10⁻¹⁷ C rests against the top plate at A. Tweezers carry it down to B at constant speed. The work done is 3.5 × 10⁻¹⁶ J. It is then released from rest at B. Gravity is negligible. Which way does it move? What is its kinetic energy when it reaches the top plate?
  1. Say what the work became.

    The speed was constant, so the kinetic energy did not change. All the work was stored as electric potential energy.

    ΔEp = 3.5 × 10⁻¹⁶ J

  2. Find the force on the particle at B.

    Unlike charges attract and like charges repel, so a positive particle is pushed away from the positive plate and pulled toward the negative plate. The top plate is negative, and the bottom plate is positive.

    pulled up by the top plate, pushed up by the bottom plate

  3. Say which way it moves.

    It moves in the direction of the force, from rest.

    up, toward the top plate

  4. Follow the energy.

    As it moves up, its stored energy Ep goes down. Energy cannot vanish, so it turns into kinetic energy, Ek. Nothing else takes a share.

    Ek at the top plate = ΔEp

  5. Write the answer with a reason.

    A diploma answer gives the direction, the number and the reason.

    up; 3.5 × 10⁻¹⁶ J; conservation of energy

Why this works. Pushing a charge against the force of a field stores energy, like lifting a ball up a hill. When the charge is released, the stored energy turns back into motion. The total energy stays the same.

Check your answer. The particle moves toward the plate it is attracted to, and it speeds up the whole way. A particle that slowed down would break conservation of energy.

Common mistake. Saying the kinetic energy is zero because the particle started at rest. Rest at B means zero kinetic energy at B, not at the top plate.

Answer: Up, toward the negative top plate. Ek = 3.5 × 10⁻¹⁶ J when it reaches the top plate.

Question type

Find the potential difference, then the energy for a different charge

Use this when: The question gives a charge and the energy stored for it. It asks for the voltage, and then for the energy a different charge would store between the same two points.

Method slide in the lesson: “Method: how to solve an energy-per-charge problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. A charge of 4.0 × 10⁻¹⁸ C stores 1.0 × 10⁻¹⁶ J when it is moved from A to B between two plates. Find the potential difference between A and B. Then find the energy stored when a charge of 1.6 × 10⁻¹⁷ C is moved between the same two points.
  1. Write the equation for the unknown.

    Potential difference is energy per charge. ΔE is the change in energy in joules and q is the size of the charge in coulombs.

    ΔV = ΔE ÷ q

  2. Find the potential difference.

    Put in the first charge and its energy. Watch the powers of ten.

    ΔV = (1.0 × 10⁻¹⁶ J) ÷ (4.0 × 10⁻¹⁸ C) = 25 J/C

  3. Say that the plates have not changed.

    ΔV belongs to the plates, so it is the same for any charge moved between A and B.

    ΔV = 25 J/C again

  4. Rearrange for the energy.

    Multiply both sides by q.

    ΔE = qΔV

  5. Find the energy for the new charge.

    Use the new charge and the same ΔV.

    ΔE = (1.6 × 10⁻¹⁷ C)(25 J/C) = 4.0 × 10⁻¹⁶ J

Why this works. Potential difference is energy per unit of charge. Doubling the charge doubles the energy, so the ratio ΔE ÷ q does not change. The voltage is a property of the plates and not of the particle.

Check your answer. The new charge is 4 times the old one, so the new energy should be 4 times 1.0 × 10⁻¹⁶ J. That is 4.0 × 10⁻¹⁶ J.

Common mistake. Using the new charge to find ΔV. Find ΔV with the charge and energy that belong together.

Answer: ΔV = 25 J/C (25 V); ΔE = 4.0 × 10⁻¹⁶ J

Question type

Read the potential difference from an energy–charge graph

Use this when: The question shows a graph of energy stored against charge moved. It asks what the slope means and what it equals.

Example. Several different charges are moved between the same two plates. A graph shows the energy stored ΔE (vertical axis) against the charge q (horizontal axis). The line of best fit passes through C = (1.0 × 10⁻¹⁸ C, 4.0 × 10⁻¹⁷ J) and D = (7.0 × 10⁻¹⁸ C, 2.8 × 10⁻¹⁶ J). What does the slope represent? What is its value?
  1. Match the equation to y = mx.

    The equation is ΔE = qΔV. ΔE is on the vertical axis and q is on the horizontal axis.

    y = ΔE x = q m = ΔV

  2. Say what the slope is.

    The number that multiplies q is the slope. In this equation that is the potential difference.

    slope = ΔV

  3. Find the rise.

    Take D minus C.

    rise = 2.8 × 10⁻¹⁶ − 4.0 × 10⁻¹⁷ = 2.4 × 10⁻¹⁶ J

  4. Find the run in the same order.

    Take D minus C again. Keep the powers of ten.

    run = 7.0 × 10⁻¹⁸ − 1.0 × 10⁻¹⁸ = 6.0 × 10⁻¹⁸ C

  5. Divide.

    Slope is rise ÷ run. The unit is joules per coulomb, which is a volt.

    slope = 2.4 × 10⁻¹⁶ ÷ (6.0 × 10⁻¹⁸) = 40 J/C

  6. Say why the line should pass through the origin.

    Zero charge stores zero energy.

    line through (0, 0)

Why this works. ΔE = qΔV has the same shape as y = mx. The slope of an energy–charge graph is the potential difference between the two points. A bigger slope means more energy for every coulomb.

Check your answer. Check with one point. C gives (4.0 × 10⁻¹⁷) ÷ (1.0 × 10⁻¹⁸) = 40 J/C, the same as the slope.

Common mistake. Reading the slope as an energy. Energy is the vertical quantity. The slope is energy per charge.

Answer: The slope is the potential difference ΔV = 40 J/C (40 V).

Question type

Use the volt: energy from charge, and charge from energy

Use this when: A battery has a voltage on its label. The question gives a charge and asks for the energy delivered, or gives an energy and asks for the charge.

Method slide in the lesson: “Method: how to solve an energy-per-charge problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. A 4.5 V battery is connected to a lamp. How much energy is delivered when 3.0 C of charge passes through the lamp? How much charge must pass to deliver 54 J?
  1. Say what the volt means.

    One volt is one joule per coulomb. The battery gives 4.5 J to each coulomb that passes through it.

    4.5 V = 4.5 J/C

  2. Write the equation for part a.

    The unknown is the energy. Multiply the charge by the voltage. A 4.5 V label means ΔV = 4.5 V.

    ΔE = qΔV

  3. Calculate part a.

    Coulombs times joules per coulomb leaves joules.

    ΔE = (3.0 C)(4.5 V) = 13.5 J

  4. Rearrange for part b.

    The unknown is now the charge. Divide both sides by ΔV.

    q = ΔE ÷ ΔV

  5. Calculate part b.

    Joules divided by joules per coulomb leaves coulombs.

    q = 54 J ÷ 4.5 V = 12.0 C

Why this works. A battery does not hold a supply of charge to give out. The charge is already in the wires. The battery supplies energy to each coulomb that goes through it, and the voltage tells you how much.

Check your answer. Each coulomb gets 4.5 J, so 54 J needs many coulombs. 12.0 C is more than 3.0 C, which is sensible.

Common mistake. Using ΔE = qΔV for both parts. When the unknown is the charge, divide the energy by the voltage.

Answer: a) 13.5 J b) 12.0 C

Question type

Find the speed of a charge accelerated from rest

Use this when: A charged particle starts from rest and is accelerated through a potential difference. The question asks for its final speed.

Method slide in the lesson: “Method: how to find the speed of a charge accelerated through a voltage”. Its numbered steps give the order; the steps below add the reason for each.

Example. An electron starts from rest at the negative plate of an electron gun. It is accelerated through a potential difference of 1.20 × 10³ V. Use q = 1.60 × 10⁻¹⁹ C and m = 9.11 × 10⁻³¹ kg. Find its speed at the positive plate.
  1. Say where the energy comes from.

    The voltage does work on the charge. The energy gained is qΔV. Only the electric force changes the energy, so all of it is kinetic energy. The small i means initial and f means final.

    qΔV = ½mvf² − ½mvᵢ²

  2. Drop the initial term.

    The question says "from rest", so vᵢ = 0. Only drop it when the question says so.

    qΔV = ½mvf²

  3. Find the energy gained.

    Multiply the size of the charge by the voltage. The electron is negative, so it is pulled toward the positive plate and gains energy.

    qΔV = (1.60 × 10⁻¹⁹ C)(1.20 × 10³ V) = 1.920 × 10⁻¹⁶ J. Keep the full value on your calculator.

  4. Solve for the speed.

    Double the energy, divide by the mass, then take the square root.

    vf = √(2 × 1.920 × 10⁻¹⁶ ÷ (9.11 × 10⁻³¹)) = 2.05 × 10⁷ m/s

  5. Check the size.

    It is fast, but well below the speed of light, 3 × 10⁸ m/s.

    2.05 × 10⁷ m/s is about 7% of that

Why this works. The electric force does work on the charge as it moves through the field. The work equals the energy gained, qΔV. With no other energy changes, all of it becomes kinetic energy.

Check your answer. Electrons have a tiny mass, so a few hundred volts is enough to give speeds of 10⁷ m/s.

Common mistake. Forgetting the square root, or using ½mv instead of ½mv².

Answer: 2.05 × 10⁷ m/s

Question type

Find the speed of a charge that is already moving

Use this when: The particle enters the gap with a speed. The question asks for its final speed after the voltage speeds it up.

Method slide in the lesson: “Method: how to find the speed of a charge accelerated through a voltage”. Its numbered steps give the order; the steps below add the reason for each.

Example. A proton enters a gap moving at 2.0 × 10⁵ m/s. It is accelerated through a potential difference of 6.00 × 10² V. Use q = 1.60 × 10⁻¹⁹ C and m = 1.67 × 10⁻²⁷ kg. Find its final speed.
  1. Write the energy balance.

    Ek is kinetic energy. The proton starts with Ek initial, gains qΔV, and ends with Ek final.

    Ek final = Ek initial + qΔV

  2. Find the initial kinetic energy.

    The proton enters at 2.0 × 10⁵ m/s, so this term is not zero. Use the proton mass.

    Ek initial = ½(1.67 × 10⁻²⁷)(2.0 × 10⁵)² = 3.340 × 10⁻¹⁷ J

  3. Find the energy gained.

    The proton has the same size of charge as an electron.

    qΔV = (1.60 × 10⁻¹⁹)(6.00 × 10²) = 9.600 × 10⁻¹⁷ J

  4. Add them.

    The final energy is the sum.

    Ek final = 3.340 × 10⁻¹⁷ + 9.600 × 10⁻¹⁷ = 1.294 × 10⁻¹⁶ J

  5. Solve for the final speed.

    Double the energy, divide by the mass, take the square root.

    v = √(2 × 1.294 × 10⁻¹⁶ ÷ (1.67 × 10⁻²⁷)) = 3.94 × 10⁵ m/s

  6. Run the sense check.

    A particle that is sped up must end faster than it began.

    3.94 × 10⁵ m/s is greater than 2.0 × 10⁵ m/s

Why this works. Energy is added to the energy the particle already has. Think of a bank balance: what you start with, plus what you deposit, equals what you end with.

Check your answer. Treating the proton as starting from rest gives 3.39 × 10⁵ m/s, which is slower than the entry speed. That cannot be right, because the voltage speeds the proton up.

Common mistake. Treating the entry speed as zero. Look for the words "enters at" in the question.

Answer: 3.94 × 10⁵ m/s

Question type

Give an energy in electron volts and in joules

Use this when: The particle has a different charge from an electron. The question asks for the energy it gains in electron volts, then in joules.

Example. An alpha particle has a charge of 3.20 × 10⁻¹⁹ C. It is accelerated from rest through 36.0 V. Use 1 eV = 1.60 × 10⁻¹⁹ J. Find the kinetic energy it gains in electron volts and then in joules.
  1. Say what an electron volt is.

    An electron volt is the energy an electron gains through one volt. It is a unit of energy, not of voltage.

    1 eV = 1.60 × 10⁻¹⁹ J

  2. Compare the charge with an electron.

    Divide the particle’s charge by the size of the electron’s charge.

    3.20 × 10⁻¹⁹ ÷ (1.60 × 10⁻¹⁹) = 2.00, so the charge is 2e

  3. Find the energy in eV.

    Each volt gives it 2 eV. Multiply by the voltage.

    2 × 36.0 V = 72.0 eV

  4. Convert to joules.

    Multiply by the number of joules in one electron volt.

    72.0 eV × 1.60 × 10⁻¹⁹ J/eV = 1.15 × 10⁻¹⁷ J

  5. Check with qΔV.

    Use the charge in coulombs. The two routes should match.

    (3.20 × 10⁻¹⁹ C)(36.0 V) = 1.15 × 10⁻¹⁷ J

Why this works. An electron volt is a unit of energy sized for single particles. To go from joules to electron volts, divide by 1.60 × 10⁻¹⁹. To go from electron volts to joules, multiply by 1.60 × 10⁻¹⁹.

Check your answer. A particle with twice the charge gets twice the energy from the same voltage. Its energy in eV should be twice the voltage in volts.

Common mistake. Saying the energy is 36.0 eV because the voltage is 36.0 V. That is true only for a charge of exactly one e.

Answer: 72.0 eV, which is 1.15 × 10⁻¹⁷ J

Diploma-style questions

Try each question first. Then open the worked solution.

Multiple choice · outcome 30-B2.3k
A battery is labelled 12 V. Which statement describes what this means?
  1. A. The battery stores 12 C of charge.
  2. B. The battery gives 12 J of energy to each coulomb of charge that passes through it.
  3. C. The battery gives out 12 J of energy every second.
  4. D. The battery makes a charge of 12 C flow every second.
Show the worked solution (try the question first)
  1. Use the meaning of the volt.

    One volt is one joule per coulomb.

    12 V = 12 J/C

  2. Match it to the choices.

    The battery gives 12 J to each coulomb of charge that passes through it.

    choice B

Why each choice is right or wrong

  • A. Voltage is not an amount of charge. The charge is already in the wires.
  • B. Correct. A volt is a joule per coulomb, so 12 V means 12 J for each coulomb.
  • C. Energy per second is a rate. Voltage is energy per coulomb, not per second.
  • D. Charge per second is a rate of flow. It is not what the volt measures.

Answer: B

Numerical response · outcome 30-B2.4k
An electron enters a gap at 3.00 × 10⁶ m/s. It is accelerated through 45.0 V. Use m = 9.11 × 10⁻³¹ kg and 1 eV = 1.60 × 10⁻¹⁹ J. Find its final kinetic energy in electron volts. Record your answer as a.bc × 10ⁿ eV. Enter the digits a, b, c, and then n.
Show the worked solution (try the question first)
  1. Find the initial energy in joules.

    The electron is already moving, so use ½mv².

    Ek initial = ½(9.11 × 10⁻³¹)(3.00 × 10⁶)² = 4.0995 × 10⁻¹⁸ J

  2. Convert it to electron volts.

    Divide by the joules in one electron volt.

    4.0995 × 10⁻¹⁸ ÷ (1.60 × 10⁻¹⁹) = 25.62 eV

  3. Find the energy gained.

    An electron through 45.0 V gains 45.0 eV.

    45.0 eV

  4. Add them. Round only at the end.

    The final energy is the sum.

    25.62 + 45.0 = 70.62 eV

  5. Write the answer in the form asked for.

    Three significant digits: 7.06 × 10¹ eV.

    a, b, c are 7, 0, 6 and n is 1

  6. Enter the digits.

    a, b, c, then n.

    record 7 0 6 1

Answer: 70.6 eV. Record 7 0 6 1.

Multiple choice · outcome 30-B2.4k
A charged particle starts from rest. It is accelerated through a potential difference ΔV and reaches a speed v. The potential difference is now doubled. The particle starts from rest again. What is the new speed?
  1. A. 2v
  2. B. √2 v, which is about 1.4v
  3. C. 4v
  4. D. v
Show the worked solution (try the question first)
  1. Write the energy equation.

    The energy gained is all kinetic energy.

    qΔV = ½mv²

  2. Solve for the speed.

    v is proportional to the square root of ΔV.

    v = √(2qΔV ÷ m)

  3. Double the voltage.

    The new speed is √2 times as large.

    v new = √2 × v

Why each choice is right or wrong

  • A. This treats the speed as proportional to the voltage. It is the energy that is proportional to the voltage.
  • B. Correct. Doubling ΔV doubles the kinetic energy. Since Ek = ½mv², the speed goes up by √2.
  • C. This would need four times the energy. Doubling the voltage only doubles the energy.
  • D. The speed changes, because the particle gains more energy.

Answer: B