B2 · Coulomb’s law · Answer key

Download the printable PDF

Calculate a pair force, predict changes, and interpret an inverse-square graph.

Open the complete lesson

Method slides in this lesson: “Method: how to solve a “what happens to the force” problem” · “Method: how to find the force between two charges”. Worked examples for each question type in B2

After the lesson: Investigate and connect (a short investigation, a data step and a real-world link)

Slide 1 of 7 · How the force changes

In B1, like charges repelled and unlike charges attracted. This lesson finds how strong that force is.

Key ideas

Symbols: q₁ and q₂ are the two charges in coulombs (C); r is the distance between them in metres (m); F is the size of the force in newtons (N).

Each charge is its own factor. Double one charge: force × 2. Double both charges: force × 2 × 2 = × 4.

Distance: F ∝ 1/r². The symbol ∝ means “is proportional to”. Double r: force × 1/4. Triple r: force × 1/9.

Rule: write each change as a factor, then multiply. For distance, flip the change, then square it. A graph of F against 1/r² is a straight line through the origin.

Example

Two charges exert a force of 0.800 N on each other. Both charges are doubled in size and the distance between them is tripled. What is the new force?

  1. Each charge doubles, so the charges give a factor of 2 × 2 = 4.
  2. The distance triples: flip to 1/3, then square it: (1/3)² = 1/9.
  3. New force = 0.800 N × 4 ÷ 9 = 0.356 N. The overall factor 4/9 is less than 1, so the force gets smaller.

Try it

Two charges exert a force of 0.150 N on each other. One charge becomes three times larger and the distance is cut in half. What is the new force?

  1. One charge triples, so its factor is 3.
  2. The distance is cut in half: flip ½ to 2, then square it: 2² = 4, so the distance factor is 4.
  3. New force = 0.150 N × 3 × 4 = 1.80 N. A smaller distance gives a stronger force, so a bigger answer is expected.

Slide 2 of 7 · Coulomb’s law

Slide 1 showed how the force changes. One equation holds all of those rules.

Key ideas

Coulomb’s law gives the size of the force between two point charges. A point charge is a tiny dot. Formula: F = k|q₁||q₂|/r², with k = 8.99 × 10⁹ N·m²/C². F is in newtons (N).

Bars | | mean size only: drop any minus sign. Convert μC to C by multiplying by 10⁻⁶. The distance r is in metres, measured from centre to centre.

The signs give the direction: like charges repel, unlike charges attract. Choose each arrow from the signs of the charges, not from a minus sign in the answer.

Newton’s third law: each charge feels the same size of force. To find r, rearrange first: multiply both sides by r², divide by F, then take the square root: r = √(k|q₁||q₂|/F).

Example

A +3.0 μC sphere and a −5.0 μC sphere are 0.30 m apart. Use k = 8.99 × 10⁹ N·m²/C². What is the size of the force on each sphere, and does the force attract or repel?

  1. The charges have opposite signs, so the force is attraction.
  2. F = (8.99 × 10⁹ N·m²/C²)(3.0 × 10⁻⁶ C)(5.0 × 10⁻⁶ C) ÷ (0.30 m)² = 1.50 N.
  3. Each sphere feels 1.50 N. Swapping the sphere positions changes only the arrow, never the size.

Try it

A +2.0 μC sphere and a +4.0 μC sphere repel each other with a force of 0.500 N. What is the distance between them?

  1. Rearrange: r² = k|q₁||q₂|/F, so r = √(k|q₁||q₂|/F).
  2. Convert first: 2.0 μC = 2.0 × 10⁻⁶ C and 4.0 μC = 4.0 × 10⁻⁶ C.
  3. r = √[(8.99 × 10⁹)(2.0 × 10⁻⁶)(4.0 × 10⁻⁶) ÷ 0.500] = 0.379 m. Take the square root at the end, or you get r² instead of r.

Slide 3 of 7 · Method: what happens to the force

These are the steps you used on slide 1.

Key ideas

Step 1: write the formula F = k|q₁||q₂|/r². The constant k never changes, so it drops out.

Step 2: list the changes in words, such as “q₁ doubles” or “r triples”.

Step 3: make one factor for each change. A charge that changes by n gives a factor of n. A distance that changes by n gives 1/n²: flip it, then square it.

Step 4: multiply the factors. Keep the total as a fraction, such as 2 × 2 × 1/9 = 4/9. Step 5: new force = old force × the total factor. Check: a bigger charge or a smaller distance must make the force bigger.

Example

Two charges exert a force of 0.800 N on each other. Both charges are doubled in size and the distance between them is tripled. What is the new force?

  1. Steps 1 and 2: F = k|q₁||q₂|/r². q₁ doubles, q₂ doubles, r triples.
  2. Step 3: the charges give 2 and 2. The distance: flip 3 to 1/3, then square it to get 1/9.
  3. Steps 4 and 5: 2 × 2 × 1/9 = 4/9, so the new force is 0.800 N × 4/9 = 0.356 N. The total factor is less than 1, so the force is weaker.

Try it

Two charges exert a force of 0.500 N on each other. The distance is doubled and one charge is tripled. What is the new force? Write each step number beside your work.

  1. The distance doubles: flip 2 to 1/2, then square it to get 1/4. One charge triples: factor 3.
  2. Total factor = 3 × 1/4 = 3/4.
  3. New force = 0.500 N × 3/4 = 0.375 N. The total factor is less than 1, so the force is weaker. This matches a longer distance winning over a bigger charge.

Slide 4 of 7 · Method: force between two charges

These are the steps you used on slide 2.

Key ideas

Step 1: list the givens in coulombs (μC × 10⁻⁶) and metres.

Step 2: use the sizes of the charges. Drop any minus sign, because the size of a force is never negative.

Step 3: put the numbers into F = k|q₁||q₂|/r², with k = 8.99 × 10⁹ N·m²/C². Square the distance.

Step 4: use the signs for the direction. Like charges repel; unlike charges attract. Each charge feels the same size of force. Check: the unit is newtons and the power of ten fits the picture.

Example

A +3.0 μC sphere and a −5.0 μC sphere are 0.30 m apart. Use k = 8.99 × 10⁹ N·m²/C². What is the size of the force on each sphere, and does the force attract or repel?

  1. Step 1: 3.0 × 10⁻⁶ C, 5.0 × 10⁻⁶ C and 0.30 m.
  2. Steps 2 and 3: F = (8.99 × 10⁹)(3.0 × 10⁻⁶)(5.0 × 10⁻⁶) ÷ (0.30)² = 1.498… N, which is 1.50 N.
  3. Step 4: the signs are opposite, so the force is attraction, 1.50 N on each sphere. Check: newtons, and near 1 N for microcoulombs 0.30 m apart.

Try it

Two +4.0 μC spheres are 0.20 m apart. Use k = 8.99 × 10⁹ N·m²/C². What is the size of the force on each sphere, and does the force attract or repel? Write each step number beside your work.

  1. Step 1: 4.0 × 10⁻⁶ C for each charge and 0.20 m.
  2. Steps 2 and 3: F = (8.99 × 10⁹)(4.0 × 10⁻⁶)(4.0 × 10⁻⁶) ÷ (0.20)² = 3.596 N, which is 3.60 N.
  3. Step 4: both charges are positive, so the force is repulsion, 3.60 N on each sphere.

Slide 5 of 7 · How was Coulomb’s law found?

Slide 2 gave Coulomb’s law. How did Coulomb find it, long before modern meters?

Key ideas

In 1785 Coulomb measured the force between two small charged balls with a torsion balance. A thin fibre holds a light rod. A force on the rod twists the fibre.

The twist angle is proportional to the force. A scale around the rod shows the angle. A thin fibre twists even for a very small force.

Coulomb could not measure charge directly. He touched a charged sphere to an identical uncharged sphere. The charge is shared equally, so each has q ÷ 2.

Cavendish used the same kind of twisting balance to measure the gravitational force between heavy lead masses. Both balances turn a tiny force into a twist angle.

Example

A metal sphere carries +8.0 μC. It touches an identical metal sphere that is uncharged. They are then separated. What is the charge on each sphere?

  1. Total charge = +8.0 μC + 0 = +8.0 μC.
  2. The spheres are identical, so the charge is shared equally. Each sphere gets +8.0 ÷ 2 = +4.0 μC.

Try it

NEW, for teacher review. Say what the scale reading of a torsion balance tells you, and why Coulomb used a very thin fibre.

  1. The twist angle is proportional to the force, so a bigger angle means a bigger force.
  2. A thin fibre twists a measurable amount even for the very small force between two charged balls.

Slide 6 of 7 · Electric force and gravity

In Physics 20, gravity also had a law with 1/r². Compare it with Coulomb’s law from slide 2.

Key ideas

Newton’s law of gravitation: F_g = Gm₁m₂/r², where G = 6.67 × 10⁻¹¹ N·m²/kg² and m is mass in kg. Coulomb’s law: Fₑ = k|q₁||q₂|/r². The two laws have the same form.

Both forces depend on a product and fall as 1/r². Both come in equal and opposite pairs.

Gravity only attracts: there is one kind of mass. The electric force can attract or repel: there are two kinds of charge. For an electron and a proton the electric force is about 10³⁹ times bigger.

Most large objects are neutral: their electric forces cancel, so gravity wins. A ratio is one force divided by the other. When both use the same r, the r² cancels.

Example

An electron and a proton are the same distance r apart. Find the ratio Fₑ ÷ F_g. Use k = 8.99 × 10⁹, G = 6.67 × 10⁻¹¹, e = 1.60 × 10⁻¹⁹ C, m(proton) = 1.67 × 10⁻²⁷ kg and m(electron) = 9.11 × 10⁻³¹ kg.

  1. Fₑ = ke²/r² and F_g = G m_p m_e/r². Divide: the distance cancels, so the ratio is the same at any distance.
  2. Fₑ ÷ F_g = ke² ÷ (G m_p m_e).
  3. = (8.99 × 10⁹)(1.60 × 10⁻¹⁹)² ÷ [(6.67 × 10⁻¹¹)(1.67 × 10⁻²⁷)(9.11 × 10⁻³¹)] = 2.27 × 10³⁹.

Try it

Check the exponent: in the ratio above, which constants are in the top and which in the bottom? Write the ratio as a formula, then say why the answer is so large.

  1. Top: k and e² (electric). Bottom: G, m_p and m_e (gravity).
  2. The ratio is ke² ÷ (G m_p m_e) = 2.27 × 10³⁹.
  3. It is huge because G and the masses are tiny, so gravity between particles is extremely weak. Check that the exponent is +39, not −39.

Slide 7 of 7 · Two-step problems

B1 shared charge between spheres that touch. Slide 2 found the force. This slide joins the two.

Key ideas

Two events, two steps. The force uses the charges after touching, not the ones the spheres started with. So the charge comes first and the force second.

Step one: share the charge. Identical spheres share the total equally. Add the signed charges, then divide by two. A negative value takes away from a positive one.

Step two: use the new charges in F = k|q₁||q₂|/r². Convert μC to C and use metres. Both charges the same sign give repulsion; one of each sign gives attraction.

Factor questions: decide which way each change pushes the force. Half the distance: factor more than 1. Half one charge: factor less than 1. Write both factors, multiply them, then multiply by the old force.

Example

Two identical metal spheres carry +6.0 μC and −2.0 μC. They touch and are separated, and then they are placed 0.10 m apart. What is the size of the force on each sphere, and does it attract or repel?

  1. After touching, each sphere has (+6.0 + (−2.0)) ÷ 2 = +2.0 μC.
  2. F = (8.99 × 10⁹)(2.0 × 10⁻⁶)(2.0 × 10⁻⁶) ÷ (0.10)² = 3.60 N.
  3. Both charges are positive, so the force is repulsion.

Try it

Two small charged spheres 0.40 m apart exert a force of 2.4 N on each other. They are moved to 0.20 m apart, and the charge on one of them is replaced by half its original size. What is the new force? A. 1.2 N. B. 2.4 N. C. 4.8 N. D. 9.6 N.

  1. Halving the distance multiplies the force by 4. Halving one charge multiplies it by 1/2.
  2. New force = 2.4 N × 4 × 1/2 = 4.8 N.
  3. Answer C.

The PDF key follows the slides, with worked answers.

Answer the 12 core practice problems online · Completed notes and worked key

B2-P01

B2-P01. Convert each value to SI units: (a) +4.50 μC, (b) -8.00 nC, (c) 25.0 cm. Keep the charge signs.

  1. Micro means 10⁻⁶, so +4.50 μC = +4.50 × 10⁻⁶ C. Nano means 10⁻⁹, so -8.00 nC = -8.00 × 10⁻⁹ C.
  2. There are 100 cm in 1 m, so 25.0 cm = 0.250 m. Convert before using Coulomb’s law because k is expressed in SI units.

B2-P02

B2-P02. A positive charge A is left of a negative charge B. Draw the electric-force arrow on each. If the force magnitude on B is 0.240 N, what is the force on A?

  1. Unlike charges attract. Draw the arrow on B left, toward A; draw the arrow on A right, toward B.
  2. The pair forces have equal magnitudes and opposite directions, so the force on A is 0.240 N right. They act on different objects and do not cancel on one object.

B2-P03

B2-P03. Two charges exert 0.720 N. Keep both charges fixed and triple their distance. What is the new force magnitude? Explain the factor.

  1. Coulomb’s law gives F proportional to 1/r² when charges are fixed. Tripling r divides the force by 3² = 9.
  2. Fnew = 0.720/9 = 0.0800 N. The smaller force is consistent with greater distance.

B2-P04

B2-P04. Keep the distance and q₂ fixed, but double |q₁|. What happens to the electric-force magnitude? Would doubling the distance instead give the same change? Explain.

  1. The charge product is in the numerator to the first power, so doubling |q₁| doubles the force.
  2. Doubling distance instead makes the denominator four times larger and the force one quarter of its original value. These are different changes.

B2-P05

B2-P05. Two point charges in air are A = +3.00 μC on the left and B = +2.00 μC on the right, separated by 0.200 m. What is the force on B, including direction? Use k = 8.99 × 10⁹ N·m²/C².

  1. Givens from the prompt: qA = +3.00 × 10⁻⁶ C, qB = +2.00 × 10⁻⁶ C, r = 0.200 m. k is the stated data-booklet constant. Like charges repel, so B feels a force right.
  2. Use the point-charge model: F = k|qAqB|/r² = (8.99 × 10⁹)(3.00 × 10⁻⁶)(2.00 × 10⁻⁶)/(0.200)² = 1.3485 N.
  3. To three significant figures: 1.35 N right on B. The units reduce to N and the direction is away from A.

B2-P06

B2-P06. Two point charges in air are A = -5.00 nC on the left and B = +8.00 nC on the right, 4.00 cm apart. What is the force on B? Use k = 8.99 × 10⁹ N·m²/C².

  1. Givens: |qA| = 5.00 × 10⁻⁹ C, |qB| = 8.00 × 10⁻⁹ C, r = 0.0400 m from the prompt; k is given. Unlike signs attract, so B is pulled left.
  2. F = k|qAqB|/r² = (8.99 × 10⁹)(5.00 × 10⁻⁹)(8.00 × 10⁻⁹)/(0.0400)² = 2.2475 × 10⁻⁴ N.
  3. Answer: 2.25 × 10⁻⁴ N left. The minus sign on qA identifies attraction; it does not make a force magnitude negative.

B2-P07

B2-P07. Two point charges have magnitudes 2.00 μC and 5.00 μC. Their force magnitude in air is 0.500 N. How far apart are they? Use k = 8.99 × 10⁹ N·m²/C². Can the force direction be determined from these data?

  1. Givens: |q₁| = 2.00 × 10⁻⁶ C, |q₂| = 5.00 × 10⁻⁶ C and F = 0.500 N from the prompt. Use Coulomb’s law because it relates these charges, force and distance.
  2. Rearrange before substitution: Fr² = k|q₁||q₂|, then r = √(k|q₁||q₂|/F) = √(0.0899/0.500) = 0.424 m.
  3. A distance is positive. Signs and positions were not given, so neither attraction/repulsion nor an absolute force direction is determined.

B2-P08

B2-P08. With the charges fixed, doubling the distance changes an electric-force magnitude from 0.800 N to what value? Apply the same change to a gravitational force initially 0.120 N. Explain one similarity and one difference between the two forces.

  1. Both laws have r² in the denominator. Doubling distance multiplies the denominator by four: electric force = 0.800/4 = 0.200 N; gravitational force = 0.120/4 = 0.0300 N.
  2. Both are inverse-square relationships for the point-source models. Gravity between ordinary masses attracts; electric force may attract or repel depending on the charge signs. The same 1/r² pattern does not mean the same strength.

B2-P09

B2-P09. The initial force magnitude is 0.540 N. Then |q₁| is doubled, |q₂| is tripled, and distance is tripled. The signs stay the same. What is the new magnitude, and does the force change between attraction and repulsion?

  1. The numerator changes by 2 × 3 = 6. The squared distance changes by 3² = 9. Thus Fnew/Fold = 6/9 = 2/3.
  2. Fnew = 0.540 × (2/3) = 0.360 N. Combining the factors before calculating avoids confusing a charge factor with a distance-square factor.
  3. The signs remain unchanged, so it is still the same kind of force. An absolute direction would also require the positions and the chosen object.

B2-P10

B2-P10. Sample data for fixed charges are: at r = 0.100 m, F = 0.800 N; at 0.200 m, F = 0.200 N; at 0.400 m, F = 0.0500 N. Draw a straightened graph with labelled axes and units, plot all three points, find its slope, and predict F at 0.300 m.

  1. An inverse-square model becomes linear when the horizontal variable is 1/r². Plot x = 100, 25.0 and 6.25 m⁻² against y = 0.800, 0.200 and 0.0500 N. Use numerical scales and draw the line through the origin.
  2. Slope = ΔF/Δ(1/r²) = (0.800 - 0.200)/(100 - 25.0) = 0.00800 N·m². The third point also fits this slope.
  3. At r = 0.300 m, 1/r² = 11.111… m⁻², so F = (0.00800)(11.111…) = 0.0889 N. These are sample data, not independent experimental proof of the law.

B2-P11

B2-P11. A student uses q₁ = +2.00 μC, q₂ = −6.00 μC and r = 0.300 m, then reports “F = -1.20 N, so the force on the right-hand charge points left.” Say which part is right and which part is wrong. What is the correct magnitude and force direction on each charge? Use k = 8.99 × 10⁹ N·m²/C²; q₁ is on the left.

  1. Coulomb’s magnitude law uses |q₁||q₂|. F = (8.99 × 10⁹)(2.00 × 10⁻⁶)(6.00 × 10⁻⁶)/(0.300)² = 1.1987 N = 1.20 N.
  2. Unlike signs attract: the right-hand charge q₂ feels 1.20 N left; the left-hand charge q₁ feels 1.20 N right. These conclusions require identifying the object and positions.
  3. A negative charge product indicates unlike signs, not a universal left direction. If right is chosen positive, the signed x-component on q₂ is -1.20 N, while its magnitude remains +1.20 N.

B2-P12

B2-P12. You can vary distance between two small charged spheres and measure force. What should remain fixed to test the distance relationship? Choose at least three distances, predict the force ratios for r, 2r and 3r, name a suitable graph, and explain one role shared by the Coulomb and Cavendish torsion balances.

  1. Keep both charges and the surrounding medium fixed; use distances large compared with sphere size for the point-charge approximation. A possible set is 0.100, 0.200 and 0.300 m.
  2. Predicted ratios are 1 : 1/4 : 1/9. Plot force in N against 1/r² in m⁻²; an ideal inverse-square model gives a straight line through the origin.
  3. Both balances use the twist of a suspended wire to make a small force measurable. Coulomb studied electric forces; Cavendish studied gravitational attraction. Charge leaking away or inaccurate centre-to-centre distances could distort the test.