RT · Worked examples
These questions find an unknown concentration or mass from a titration. You read the titre, take the mole ratio from the balanced equation, and divide by the volume of the solution that held the analyte.
Open the RT lesson · RT slide notes
Worked question types
Each example shows every step, why you do it, and the idea behind it.
Question typeName the titrant, the analyte, the known solution and the glassware
Use this when: The question describes a titration set-up and asks which solution is which, or which glassware to use.
Example. A student has an iron(II) solution of unknown concentration and a known solution of 0.0150 mol/L MnO₄⁻(aq). She puts 25.00 mL of the iron(II) solution in a flask and fills a tall tube with a tap, called a buret, with the MnO₄⁻(aq). Name the titrant and the analyte. Say which solution is known. Choose glassware for each volume.
- Find the solution in the buret.
The titrant is the solution that is added from the buret.
titrant: MnO₄⁻(aq)
- Find the solution in the flask.
The analyte is the solution being analysed. It is in the flask.
analyte: Fe²⁺(aq)
- Mark which solution is known.
The question gives a concentration for only one of them. The other is the unknown we want.
known: MnO₄⁻(aq), 0.0150 mol/L. unknown: Fe²⁺(aq)
- Choose the glassware for the 25.00 mL sample.
A pipette delivers one fixed volume very precisely.
pipette for the analyte
- Choose the glassware for the titrant.
A buret delivers any volume and measures how much was used. That volume is the titre.
buret for the titrant
- Say why not a graduated cylinder.
A cylinder is less precise. A small error in a volume carries into the final concentration.
cylinder: not for precise volumes
Why this works. A titration needs a reaction that is complete and fast, a visible signal to stop, and precise volumes. The titrant is in the buret and the analyte is in the flask. Known and unknown can be either one.
Check your answer. Each solution has exactly one job and one place: titrant in the buret, analyte in the flask.
Common mistake. Calling the unknown solution the titrant. The titrant is simply the solution in the buret, and in this question it is the known one.
Answer: Titrant: MnO₄⁻(aq) in the buret. Analyte: Fe²⁺(aq) in the flask. Known: MnO₄⁻(aq). Pipette for the sample, buret for the titrant
Question typeFind each titre and average only the trials that agree
Use this when: The question gives buret readings for several trials and an agreement limit, and asks for the average titre.
Example. A buret is read at the start and end of four trials, in mL. Trial 1: 0.35 and 17.85. Trial 2: 17.85 and 35.45. Trial 3: 0.10 and 17.65. Trial 4: 0.20 and 19.00. The largest and smallest trials kept may differ by at most 0.20 mL. Find the average titre.
- Write the rule for one titre.
A buret counts up from zero as liquid leaves. The titre is the final reading minus the initial reading.
titre = final − initial
- Find each titre.
Never assume the start is 0.00. Use each trial’s own initial reading.
1: 17.85 − 0.35 = 17.50 mL. 2: 35.45 − 17.85 = 17.60 mL. 3: 17.65 − 0.10 = 17.55 mL. 4: 19.00 − 0.20 = 18.80 mL
- Find the trials that agree.
Compare the titres. The largest and smallest trials kept may differ by at most 0.20 mL. Trials 1, 2 and 3 pass.
17.50, 17.60, 17.55: largest − smallest = 0.10 mL, which is under 0.20 mL
- Leave out the trial that does not agree.
Trial 4 is far above the others. The endpoint was probably overshot. Do not average in a trial you know is bad.
18.80 − 17.60 = 1.20 mL, which is over 0.20 mL
- Average the agreeing trials.
Add them and divide by how many there are.
(17.50 + 17.60 + 17.55) ÷ 3 = 52.65 ÷ 3 = 17.55 mL
Why this works. One titration may hold a mistake, so we repeat it and average only the trials that agree. The question states how close they must be. The average is the titre used in the calculation.
Check your answer. The average lies between the smallest and largest of the trials that were kept.
Common mistake. Averaging all four trials, or using the final reading without subtracting the initial reading.
Answer: Titres: 17.50, 17.60, 17.55 and 18.80 mL. Average of trials 1 to 3: 17.55 mL
Question typeRead the mole ratio from the equation, check it with electrons, and find E°reaction
Use this when: The question gives a balanced redox equation and asks for the mole ratio, why it is not 1 : 1, and whether the reaction is spontaneous.
Example. In acid, hydrogen peroxide, H₂O₂, reacts with permanganate: 2MnO₄⁻ + 6H⁺ + 5H₂O₂ → 2Mn²⁺ + 8H₂O + 5O₂. Find the mole ratio of H₂O₂ to MnO₄⁻. Check it with electrons. Table values: E°(MnO₄⁻/Mn²⁺) = +1.51 V and E°(O₂/H₂O₂) = +0.70 V. Find E°reaction, the voltage number for the whole reaction under standard conditions.
- Read the coefficients.
Coefficients count particles, so they also give the ratio of moles.
5 H₂O₂ : 2 MnO₄⁻
- Write the factor to go from titrant to analyte.
Put the wanted substance on top. To go from MnO₄⁻ to H₂O₂ you multiply by 5/2.
n(H₂O₂) = n(MnO₄⁻) × 5/2
- Count the electrons taken by MnO₄⁻.
Mn goes from +7 to +2. Each MnO₄⁻ takes 5 electrons. Two MnO₄⁻ take 10.
5 × 2 = 10e⁻
- Count the electrons given by H₂O₂.
O goes from −1 in H₂O₂ to 0 in O₂. Each O loses 1 electron and each H₂O₂ has 2 O. Five H₂O₂ give 10.
1 × 2 × 5 = 10e⁻
- Compare.
Electrons given must equal electrons taken. The ratio 5 : 2 is confirmed.
10 = 10 ✓
- Find E°reaction.
The oxidizing agent is MnO₄⁻ and the reducing agent pair is O₂/H₂O₂. Subtract the reducing agent value from the oxidizing agent value, as in B4. Do not multiply by coefficients.
E°reaction = +1.51 − (+0.70) = +0.81 V
- Read the sign.
A positive value means the written direction is spontaneous under standard conditions. It does not tell you the speed.
spontaneous
Why this works. The coefficients are the bridge between the titrant and the analyte. They come from the balanced equation, and they agree with the electrons. Standard conditions are 1.0 mol/L, 25.00 °C and 101.325 kPa.
Check your answer. The positive E°reaction agrees with MnO₄⁻ being the stronger oxidizing agent. It is higher in the electrode table than O₂/H₂O₂.
Common mistake. Using a 1 : 1 ratio, or taking a ratio from a different equation.
Answer: Ratio 5 mol H₂O₂ to 2 mol MnO₄⁻. E°reaction = +0.81 V, spontaneous
Question typeRecognise the endpoint and say what an overshoot does
Use this when: The question describes colours seen during a permanganate titration and asks which one is the endpoint, or what an error does to the result.
Example. A student adds 0.0200 mol/L MnO₄⁻(aq) to 25.00 mL of Fe²⁺(aq) in acid. Observation (a): each drop turns colourless as it mixes. Observation (b): one drop leaves a faint pink-purple that lasts 30 s. Observation (c): the flask is deep pink. Which is the endpoint? The true titre is 18.50 mL. The student stops at 18.90 mL. How does c(Fe²⁺) change?
- Say what the colours mean.
MnO₄⁻ is deep purple. Mn²⁺ is colourless at 0.010 mol/L and pale pink at 1.0 mol/L (Data Booklet p. 11). While Fe²⁺ is present, each drop is used up.
(a): Fe²⁺ is still reacting
- Find the first colour that stays.
When the last Fe²⁺ has reacted, the next drop has nothing to react with. Its colour stays.
(b) is the endpoint: a faint pink that lasts about 30 s
- Say what (c) means.
A deep pink means more titrant was added than the reaction needed.
(c): overshot
- Name the exact point that is calculated.
Equivalence is the point where the moles are in the ratio of the equation. It is calculated. The endpoint is observed, ideally one drop after equivalence.
equivalence: calculated. endpoint: observed
- Find c(Fe²⁺) for the true titre.
Use n(MnO₄⁻) = c × V, then the ratio 5 : 1, then divide by 0.02500 L.
5 × 0.0200 mol/L × 0.01850 L ÷ 0.02500 L = 0.0740 mol/L
- Find c(Fe²⁺) for the overshot titre.
The calculation uses the reading the student recorded.
5 × 0.0200 mol/L × 0.01890 L ÷ 0.02500 L = 0.0756 mol/L
- Say how much it changed.
Compare the two values.
(0.0756 − 0.0740) ÷ 0.0740 × 100 = 2.2 % too high
Why this works. The endpoint is the signal we see. Equivalence is the point we calculate. An overshoot makes the titre too large, so every number after it in the chain is too large.
Check your answer. More titrant was used, so more moles of Fe²⁺ seem to be in the flask, and the concentration is too high.
Common mistake. Stopping at a deep pink, or at a colour that fades when you swirl the flask.
Answer: (b) is the endpoint. The overshoot makes c(Fe²⁺) 0.0756 mol/L instead of 0.0740 mol/L, which is 2.2 % too high
Question typeFind an unknown concentration from a titration
Use this when: The question gives the analyte volume, the titrant concentration, the average titre and the equation, and asks for the analyte concentration.
Example. In acid, MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 25.00 mL sample of Fe²⁺(aq) needs an average of 21.30 mL of 0.0180 mol/L MnO₄⁻(aq). Find c(Fe²⁺) in mol/L.
- Mark the known and unknown.
Use Method: how to do a redox titration calculation. The titrant is the known solution. The analyte, Fe²⁺, is the unknown.
known: c(MnO₄⁻) = 0.0180 mol/L. find: c(Fe²⁺)
- Convert both volumes to litres.
Concentration is moles per litre, so divide each volume in mL by 1000.
21.30 mL ÷ 1000 = 0.02130 L. 25.00 mL ÷ 1000 = 0.02500 L
- Find the moles of titrant.
Use n = c × V. The units mol/L times L leave mol.
n(MnO₄⁻) = 0.0180 mol/L × 0.02130 L = 3.834 × 10⁻⁴ mol
- Use the mole ratio.
The equation has 5 Fe²⁺ for each MnO₄⁻. Put the wanted substance on top so mol MnO₄⁻ cancels.
n(Fe²⁺) = 3.834 × 10⁻⁴ mol × 5/1 = 1.917 × 10⁻³ mol
- Divide by the volume of the flask.
The Fe²⁺ was in the 25.00 mL sample, not in the titre.
c(Fe²⁺) = 1.917 × 10⁻³ mol ÷ 0.02500 L = 0.0767 mol/L
Why this works. The chain is titrant moles, then the ratio, then analyte moles, then concentration. The titre is the volume of titrant. It is never the divisor for the analyte.
Check your answer. The answer is larger than 0.0180 mol/L. That makes sense, because 5 Fe²⁺ react with each MnO₄⁻ and the two volumes are close.
Common mistake. Dividing the analyte moles by the titre instead of the flask volume.
Answer: c(Fe²⁺) = 0.0767 mol/L
Question typeTake the ratio from the equation in front of you
Use this when: The question gives a new equation, so the ratio is not the 5 : 1 from the permanganate and iron(II) reaction.
Example. In acid, Cr₂O₇²⁻ + 14H⁺ + 6Fe²⁺ → 2Cr³⁺ + 7H₂O + 6Fe³⁺. A 25.00 mL sample of Fe²⁺(aq) needs an average of 14.75 mL of 0.0160 mol/L Cr₂O₇²⁻(aq). Find c(Fe²⁺) in mol/L.
- Read the ratio from this equation.
The coefficient of Fe²⁺ is 6. The coefficient of Cr₂O₇²⁻ is 1. Do not reuse the 5 from another equation.
6 Fe²⁺ : 1 Cr₂O₇²⁻
- Convert both volumes to litres.
Divide each volume in mL by 1000.
14.75 mL ÷ 1000 = 0.01475 L. 25.00 mL ÷ 1000 = 0.02500 L
- Find the moles of titrant.
Use n = c × V.
n(Cr₂O₇²⁻) = 0.0160 mol/L × 0.01475 L = 2.360 × 10⁻⁴ mol
- Use the mole ratio.
Wanted substance on top. The factor is 6/1.
n(Fe²⁺) = 2.360 × 10⁻⁴ mol × 6/1 = 1.416 × 10⁻³ mol
- Divide by the flask volume.
The Fe²⁺ was in the 25.00 mL sample.
c(Fe²⁺) = 1.416 × 10⁻³ mol ÷ 0.02500 L = 0.0566 mol/L
- Check the electrons.
Each Cr₂O₇²⁻ takes 6 electrons. Each Fe²⁺ gives 1. So 6 Fe²⁺ are needed.
Cr: +6 → +3, two atoms, 6e⁻. Fe: +2 → +3, 1e⁻ each
Why this works. The ratio factor always comes from the equation you are given. It points from the known substance to the wanted substance. Here it is 6, and for the permanganate and iron(II) reaction it was 5.
Check your answer. About 6 × 0.0160 × (14.75 ÷ 25.00) is a little over 0.05, so 0.0566 mol/L is reasonable.
Common mistake. Using 5 from the permanganate equation, or using the fraction upside down.
Answer: c(Fe²⁺) = 0.0566 mol/L
Question typeFind the titrant concentration when the analyte is the known solution
Use this when: The question gives a standard solution in the flask and asks for the concentration of the solution in the buret.
Example. In acid, MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 25.00 mL sample of 0.0500 mol/L Fe²⁺(aq) is titrated with MnO₄⁻(aq) of unknown concentration. The average titre is 21.30 mL. Find c(MnO₄⁻) in mol/L.
- Mark the known and unknown.
This time the flask holds the known solution. The unknown is in the buret.
known: c(Fe²⁺) = 0.0500 mol/L. find: c(MnO₄⁻)
- Convert both volumes to litres.
Divide each volume in mL by 1000.
25.00 mL ÷ 1000 = 0.02500 L. 21.30 mL ÷ 1000 = 0.02130 L
- Find the moles of the known solution.
Use n = c × V with the flask volume.
n(Fe²⁺) = 0.0500 mol/L × 0.02500 L = 1.250 × 10⁻³ mol
- Use the mole ratio the other way round.
The wanted substance is MnO₄⁻, so it goes on top. There is 1 MnO₄⁻ for every 5 Fe²⁺.
n(MnO₄⁻) = 1.250 × 10⁻³ mol × 1/5 = 2.500 × 10⁻⁴ mol
- Divide by the volume of the solution that held it.
The MnO₄⁻ came from the buret, so its volume is the titre.
c(MnO₄⁻) = 2.500 × 10⁻⁴ mol ÷ 0.02130 L = 0.0117 mol/L
Why this works. The chain does not care which solution is known. You always go from moles of the known solution, through the ratio, to moles of the unknown, and then divide by the unknown solution’s own volume.
Check your answer. The answer is smaller than 0.0500 mol/L. That makes sense, because each MnO₄⁻ reacts with 5 Fe²⁺.
Common mistake. Using 5/1 as in the usual titration. When the unknown is the titrant, the factor turns upside down.
Answer: c(MnO₄⁻) = 0.0117 mol/L
Question typeScale an aliquot up to the whole sample, then find a mass and a mass percent
Use this when: The question titrates a small measured portion, called an aliquot, of a solution made from a solid, and asks for the mass or mass percent in the solid.
Example. An iron tablet of mass 0.900 g is dissolved and made up to 100.0 mL of Fe²⁺(aq). A 10.00 mL aliquot needs 12.80 mL of 0.00500 mol/L MnO₄⁻(aq). The equation is MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Find the mass of iron in the tablet and the mass percent of iron. Fe is 55.85 g/mol, from the Data Booklet.
- Convert the titre to litres.
Divide by 1000.
12.80 mL ÷ 1000 = 0.01280 L
- Find the moles of titrant.
Use n = c × V.
n(MnO₄⁻) = 0.00500 mol/L × 0.01280 L = 6.400 × 10⁻⁵ mol
- Use the ratio to get the iron in the aliquot.
The factor is 5/1. This is the iron in the aliquot only.
n(Fe²⁺) = 6.400 × 10⁻⁵ mol × 5 = 3.200 × 10⁻⁴ mol
- Find the scale from the aliquot to the whole solution.
The whole solution has the same concentration, so it holds that many times the moles.
100.0 mL ÷ 10.00 mL = 10.00
- Scale the moles.
Multiply the aliquot moles by the scale. All the iron in the tablet is now in this solution.
n(Fe²⁺) = 3.200 × 10⁻⁴ mol × 10.00 = 3.200 × 10⁻³ mol
- Find the mass of iron.
Use m = n × M. Keep four digits for now.
m(Fe) = 3.200 × 10⁻³ mol × 55.85 g/mol = 0.1787 g
- Find the mass percent.
Divide by the mass of the tablet and multiply by 100. Round only now, to three digits.
0.1787 g ÷ 0.900 g × 100 = 19.9 %
Why this works. An aliquot is only part of the solution. Scale its moles up to the whole solution before you find a mass. Keep one extra digit in the middle lines and round only the final answers.
Check your answer. Iron cannot be more than the whole tablet. 0.179 g is less than 0.900 g, and 19.9 % is less than 100 %.
Common mistake. Stopping at the aliquot moles. The mass would be 10 times too small.
Answer: m(Fe) = 0.179 g and mass percent = 19.9 %
Question typeTrace an error through the chain to see if the result is too high, too low or unchanged
Use this when: The question describes a mistake in a titration and asks how it changes the calculated concentration.
Example. A student titrates 25.00 mL of Fe²⁺(aq) with 0.0200 mol/L MnO₄⁻(aq). The ratio is 5 Fe²⁺ to 1 MnO₄⁻. The true titre is 18.50 mL. Decide if c(Fe²⁺) is too high, too low or unchanged for each error. Error (a): An air bubble in the buret tip leaves during the titration, so the recorded titre is 18.90 mL. Error (b): The flask is rinsed with water before the sample goes in. Error (c): The initial reading, really 0.40 mL, is recorded as 1.00 mL, and the final reading is 18.90 mL. Error (d): The pipette is rinsed with water instead of the Fe²⁺ solution.
- Find the true result.
Use the chain with the true titre.
5 × 0.0200 mol/L × 0.01850 L ÷ 0.02500 L = 0.0740 mol/L
- Trace error (a).
The air took the place of liquid, so the reading is larger than the liquid delivered. The titre is too large, so n(MnO₄⁻), n(Fe²⁺) and c are all too large.
5 × 0.0200 mol/L × 0.01890 L ÷ 0.02500 L = 0.0756 mol/L: too high
- Trace error (b).
Water in the flask adds no moles of Fe²⁺. The titre does not change.
0.0740 mol/L: unchanged
- Trace error (c).
The titre is final minus initial. A larger initial reading makes the titre too small, so c is too small.
titre = 18.90 − 1.00 = 17.90 mL. c = 0.0716 mol/L: too low
- Trace error (d).
Water left in the pipette dilutes the sample, so fewer moles of Fe²⁺ are delivered. The titre is smaller, but the calculation still uses 25.00 mL.
n(Fe²⁺) delivered is smaller: too low
Why this works. Ask which number in the chain an error changes. The titre sets the moles of titrant. The moles of titrant set the moles of analyte. The moles of analyte set the concentration.
Check your answer. Errors that raise the titre raise the result, and errors that lower the titre lower it.
Common mistake. Guessing from the size of the mistake without tracing the chain. A wet flask looks like an error but changes nothing.
Answer: (a) too high, 0.0756 mol/L. (b) unchanged, 0.0740 mol/L. (c) too low, 0.0716 mol/L. (d) too low
Diploma-style questions
Try each question first. Then open the worked solution.
Numerical response · outcome 30-B1.8kIn acid, MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 25.00 mL sample of Fe²⁺(aq) needs an average of 19.30 mL of 0.0180 mol/L MnO₄⁻(aq). Find c(Fe²⁺). Record your answer as a.bc × 10⁻² mol/L. Enter the digits a, b and c.
Show the worked solution (try the question first)
- Convert both volumes to litres.
Divide each volume in mL by 1000.
19.30 mL = 0.01930 L. 25.00 mL = 0.02500 L
- Find the moles of titrant.
Use n = c × V.
n(MnO₄⁻) = 0.0180 mol/L × 0.01930 L = 3.474 × 10⁻⁴ mol
- Use the ratio.
The factor is 5/1.
n(Fe²⁺) = 3.474 × 10⁻⁴ mol × 5 = 1.737 × 10⁻³ mol
- Divide by the flask volume.
Use the 25.00 mL sample.
c(Fe²⁺) = 1.737 × 10⁻³ mol ÷ 0.02500 L = 0.0695 mol/L = 6.95 × 10⁻² mol/L
- Enter the digits.
The value is 6.95 × 10⁻², so a = 6, b = 9 and c = 5.
record 6 9 5
Answer: 0.0695 mol/L, which is 6.95 × 10⁻² mol/L. Record 6 9 5.
Multiple choice · outcome 30-B1.8kA student titrates Fe²⁺(aq) with MnO₄⁻(aq). The initial buret reading is really 1.50 mL, but the student records 0.50 mL. The final reading is correct. How is the calculated c(Fe²⁺) affected?
- A. too high
- B. too low
- C. unchanged
- D. impossible to tell without an indicator
Show the worked solution (try the question first)
- Trace the titre.
Titre = final − initial. A smaller initial reading makes the difference larger.
recorded titre is 1.00 mL larger than the true titre
- Trace the chain.
A larger titre gives larger n(MnO₄⁻), then larger n(Fe²⁺), then a larger c(Fe²⁺).
every number is too large
- Choose.
The result is too high.
answer A
Why each choice is right or wrong
- A. Correct. The recorded titre is too large by 1.00 mL, so the calculated c(Fe²⁺) is too high.
- B. A too-low result comes from a titre that is too small. This error makes the titre larger.
- C. The titre is calculated from the readings, so a wrong reading changes it. Only an error that leaves the moles of Fe²⁺ and the titre alone gives no change.
- D. The direction can be found by tracing the chain. No indicator is needed to judge it.
Answer: A
Multiple choice · outcome 30-B1.8kIn acid, 2MnO₄⁻ + 5SO₃²⁻ + 6H⁺ → 2Mn²⁺ + 5SO₄²⁻ + 3H₂O. A 25.00 mL sample of SO₃²⁻(aq) needs 24.00 mL of 0.0150 mol/L MnO₄⁻(aq). What is c(SO₃²⁻)?
- A. 0.0375 mol/L
- B. 0.0360 mol/L
- C. 0.0144 mol/L
- D. 0.00576 mol/L
Show the worked solution (try the question first)
- Convert the titre and find the moles of titrant.
Use n = c × V with V in litres.
n(MnO₄⁻) = 0.0150 mol/L × 0.02400 L = 3.600 × 10⁻⁴ mol
- Use the ratio from this equation.
There are 5 SO₃²⁻ for every 2 MnO₄⁻. The factor is 5/2.
n(SO₃²⁻) = 3.600 × 10⁻⁴ mol × 5/2 = 9.000 × 10⁻⁴ mol
- Divide by the sample volume.
The SO₃²⁻ was in the 25.00 mL sample.
9.000 × 10⁻⁴ mol ÷ 0.02500 L = 0.0360 mol/L
- Choose.
Match the value.
answer B
Why each choice is right or wrong
- A. This divides by the titre, 24.00 mL, instead of the 25.00 mL sample.
- B. Correct. 9.000 × 10⁻⁴ mol ÷ 0.02500 L = 0.0360 mol/L.
- C. This uses a 1 : 1 ratio. The equation gives 5 : 2.
- D. This uses the ratio upside down, 2/5 instead of 5/2.
Answer: B
Numerical response · outcome 30-B1.8kIn acid, MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 25.00 mL aliquot from a 250.0 mL flask of Fe²⁺(aq) needs 14.80 mL of 0.0100 mol/L MnO₄⁻(aq). What mass of iron is in the whole flask? Fe is 55.85 g/mol. Record your answer as 0.abc g. Enter the digits a, b and c.
Show the worked solution (try the question first)
- Find the moles of titrant.
Convert 14.80 mL to 0.01480 L and use n = c × V.
n(MnO₄⁻) = 0.0100 mol/L × 0.01480 L = 1.480 × 10⁻⁴ mol
- Use the ratio.
The factor is 5/1. This is the iron in the aliquot.
n(Fe²⁺) = 1.480 × 10⁻⁴ mol × 5 = 7.400 × 10⁻⁴ mol
- Scale to the whole flask.
The flask is larger than the aliquot by this factor.
250.0 mL ÷ 25.00 mL = 10.00. 7.400 × 10⁻⁴ mol × 10.00 = 7.400 × 10⁻³ mol
- Convert to mass.
Use m = n × M. Keep four digits, then round to three.
7.400 × 10⁻³ mol × 55.85 g/mol = 0.4133 g = 0.413 g
- Enter the digits.
The value is 0.413 g, so a = 4, b = 1 and c = 3.
record 4 1 3
Answer: 0.413 g. Record 4 1 3.