Alberta Chemistry 30 · Unit B

Redox · concise classroom sequence

A connected classroom sequence with staged explanations and practice. No advance preparation is required. B1–B16 and the redox titration lesson (RT) are the current Unit B lessons. NI is a short lesson on net ionic equations. R1 is an optional review of B1 to B5. Further lessons will appear as they are rebuilt.

B1 · Electron transfer and redox

Explain oxidation and reduction as electrons lost and gained. Name what is oxidized, what is reduced, and both agents. Tell a redox reaction from ions that only separate.

B2 · Oxidation numbers and redox changes

Find an oxidation number with the rules and the sum rule. Use oxidation numbers to find what is oxidized and what is reduced. Name both agents, and recognize disproportionation.

NI · Net ionic equations

Write a dissolved ionic compound as its ions. Write a net ionic equation and name the spectator ions. Check a net ionic equation for atoms and charge.

B3 · Balance redox equations in acid

Balance a half-reaction for atoms and charge. Balance a half-reaction in acid with H₂O, H⁺ and e⁻. Join two half-reactions into one net ionic equation.

B4 · Predict reactions and investigate

Rank reducing agents and oxidizing agents from test results. Predict which way a reaction goes under standard conditions, using the Data Booklet table. Plan a virtual investigation and say what its results can and cannot show.

B5 · Balance redox equations in neutral and basic solution

Decide whether H⁺, OH⁻ and H₂O may stay in an acidic, neutral or basic equation. Balance a redox equation for a basic solution, with the half-reactions given or not given. Check every final equation against the kind of solution in the question.

R1 · Review of B1 to B5 (optional)

Use each method from B1 to B5 on a new question. Balance a redox equation in acidic and in basic solution, and check it. Choose the method a question needs.

RT · Redox titrations

Explain titrant, analyte, titre, endpoint and equivalence. Use the mole ratio from a balanced redox equation to find an unknown concentration or mass. Scale an aliquot and predict which way an error moves a result.

B6 · Voltaic cells

Explain why a voltaic cell separates the half-reactions and needs a salt bridge. Identify the anode and cathode, and write cell notation and half-reactions. Predict observations and calculate the standard cell potential.

B7 · Reduction potentials and the hydrogen reference

Explain why every potential is measured against the standard hydrogen reference. Use the table to build a cell from any two half-cells, with inert electrodes when needed. Calculate E°cell, predict observations and say what the sign does and does not tell us.

B8 · Electrolytic cells

Explain how an electrolytic cell uses electrical energy to drive a reaction that is not spontaneous. Identify the anode, cathode, polarity and ion movement, and write half-reactions for molten salts and plating. Compare voltaic and electrolytic cells.

B9 · Electrolysis of aqueous solutions

Decide what is reduced and what is oxidized when a solution is electrolyzed, using the table. Explain the chloride exception and why E° values are used with caution. Predict products, colour, mass and pH changes and write the cell reaction.

B10 · Faraday's law

Find the charge from current and time, with the time in seconds. Use the Faraday constant and a half-reaction to find moles of metal. Find the mass deposited, or the time needed, in an electrolysis.

B11 · Faraday's law with the unknown chosen

Choose the starting point of the Faraday chain from the givens and the question. Find a current, a time, an ion charge or a mass in an electrolysis. Use Faraday’s law in a voltaic cell and use the mass gained at a cathode.

B12 · Industrial applications and corrosion protection

Explain rusting as a redox cell and calculate E°cell for it. Choose and explain barrier, sacrificial and power-supply protection using the table. Describe electroplating, refining, electrowinning and aluminium production, and judge claims with evidence. Identify the electron transfer in cellular respiration and photosynthesis.

B13 · Batteries, fuel cells and chlorine for water

Explain batteries as voltaic cells, and primary and rechargeable cells. Write the reactions and find the voltage of a lead-acid cell, an alkaline cell and a hydrogen fuel cell. Explain how chlorine is made for water, and judge a cell for a purpose using evidence.

B14 · Investigation: plan and predict

Write a testable question with the independent, dependent and controlled variables. Draw a labelled cell design and predict the anode, the equation and the voltage from the table. Plan safe handling and disposal and plan a battery with cells in a row.

B15 · Investigation: analyze and explain

Set out results in a table and compare them with predictions. Explain a difference with a possible cause and a test. Write a conclusion with a claim, evidence and an explanation.

B16 · Unit B review: choose the method

Choose the method a Unit B question needs. Use the table, Faraday’s law and a titration in turn. Explain corrosion protection, plating and bleaching with redox ideas.

Unit A: Thermochemical changes (first lessons)

A1 to A14 cover Unit A: twelve lessons, an investigation (A13) and a unit review (A14).

A1 · Energy sources and where reaction energy comes from

Trace energy sources back to the Sun, or to another original source. Explain that bonds store the potential energy of a reaction. Link energy out or in to exothermic and endothermic changes.

A2 · Calorimetry and the sign of ΔH

Define system, surroundings and an isolated calorimeter. Use q = mcΔT with the correct mass and c from the Data Booklet. Find ΔH and give its sign for a calorimetry problem.

A3 · Molar enthalpy from calorimetry

Explain molar enthalpy as a constant ratio of ΔH to moles. Find moles from mass and molar mass or from concentration and volume. Calculate ΔHₘ from calorimetry data, with the correct sign.

A4 · Reaction types, forms and states

Name the five reaction types from the pattern. Write formulas and states for ionic, molecular and elemental substances. Predict products and balance an equation with states.

A5 · Four ways to communicate enthalpy change

Write enthalpy changes in four ways. Convert between molar enthalpy, ΔH and an energy term. Classify a reaction as endothermic or exothermic.

A6 · Enthalpy change from formation enthalpies

Use standard enthalpies of formation from the Data Booklet. Calculate ΔH as products minus reactants. Scale ΔH from moles to a mass of fuel.

A7 · Multistep problems: the plan

Choose the correct state of water for cells and for open combustion. Use the two-ratio plan to solve a multistep problem. Explain why real devices use less than 100% of the energy.

A8 · Multistep problems with formation values

Decide when to use formation values and when to use given energy. Scale a molar enthalpy to an equation or to a sample. Solve long problems for a mass of fuel or of a product.

A9 · Multistep problems with calorimetry data

Use the two-ratio plan with calorimetry data to find ΔH or a temperature. Use q = CΔT for a bomb calorimeter. Compare fuels by the CO₂ they make and name other combustion impacts.

A10 · Activation energy, bonds and catalysts

Read Ea and ΔH from an energy diagram. Explain bond breaking and forming and the reverse reaction. Describe what a catalyst changes and what it does not.

A11 · Hess’s law: the method

Explain why Hess’s law is needed. Flip, scale and cancel equations correctly. Use the systematic method to find ΔH for a net reaction.

A12 · Hess’s law: harder problems

Combine flipping and scaling in one problem. Rewrite equations with energy terms as ΔH values. Spot distractors and check a Hess’s law answer.

A13 · Calorimetry investigation: fuels, efficiency and safety

Plan a fair test with variables, measurements and WHMIS safety. Find molar enthalpy and percent efficiency from calorimetry data. Explain sources of error and design a catalyst test and a heating device.

A14 · Unit A review: efficiency, fuel choices and mixed problems

Calculate the efficiency of a thermal system and the fuel energy it needs. Compare coal and natural gas by CO₂ and cost, and weigh benefits and risks of fossil fuels. Combine calorimetry, formation values and efficiency in one problem.

Virtual investigation

After B4, test metals in ion solutions in a simulation. Record what you see, and say what the results can and cannot show.

Open investigation