RT · Redox titrations · Notes

Download the printable PDF

Goals: Explain titrant, analyte, titre, endpoint and equivalence. Use the mole ratio from a balanced redox equation to find an unknown concentration or mass. Scale an aliquot and predict which way an error moves a result.

Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.

Slide 1 of 9 · Two solutions, two jobs

Key ideas

A titration finds an unknown by reacting a measured volume of one solution with a solution whose concentration is already known.

The solution in the buret is the . The solution in the flask is the , the one being analysed.

A good titration needs a reaction that goes quickly, a visible change called the , and carefully measured volumes.

Use a to deliver the analyte and a to deliver the titrant. A graduated cylinder is less precise.

Example

A flask holds 25.00 mL of Fe²⁺(aq) of unknown concentration. A buret holds 0.0200 mol/L MnO₄⁻(aq). Which solution is the titrant, which is the analyte, and how does the known solution help find the unknown concentration?

Try it

A buret holds 0.0150 mol/L MnO₄⁻(aq). A flask holds 10.00 mL of Sn²⁺(aq) of unknown concentration. Name the titrant and the analyte, and say which glassware should measure the 10.00 mL.

Slide 2 of 9 · Read the buret and use the trials

Key ideas

A buret is numbered from at the top, so the readings get larger as liquid leaves.

The volume delivered is called the . It equals the final reading the initial reading.

Read the curved surface, the , at eye level. For dark purple permanganate, read the edge. Record decimal places.

Repeat the titration and average only the trials that agree within the the question states. For a limit of 0.20 mL, the largest and smallest trials kept may differ by at most .

Example

A buret has an initial reading of 0.40 mL and a final reading of 18.90 mL. Find the titre.

Try it

Three trials give titres of 18.50 mL, 18.60 mL and 19.60 mL. Trials may differ by at most 0.20 mL from largest to smallest. Which trials do you average, and what is the average titre?

Slide 3 of 9 · The equation sets the mole ratio

Key ideas

The coefficients in a balanced equation count particles, so they also give the . In MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺, MnO₄⁻ to Fe²⁺ is .

Manganese goes from to +2, so each MnO₄⁻ gains electrons. Iron goes from +2 to +3, so each Fe²⁺ loses 1 electron.

Electrons lost must electrons gained. That is why Fe²⁺ ions are needed for each MnO₄⁻, and the ratio is not 1 : 1.

E°reaction = E°(oxidizing agent) − E°(reducing agent), using values from the Data Booklet table printed on p. . A result means the written direction is spontaneous. Acidified MnO₄⁻ or Cr₂O₇²⁻ is usually the strongest oxidizing agent in a titration.

Example

Given in acidic solution: MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Give the mole ratio of Fe²⁺ to MnO₄⁻ and explain it with electrons. Then find E°reaction using E°(MnO₄⁻/Mn²⁺) = +1.51 V and E°(Fe³⁺/Fe²⁺) = +0.77 V.

Try it

Given in acidic solution: 5H₂C₂O₄ + 2MnO₄⁻ + 6H⁺ → 10CO₂ + 2Mn²⁺ + 8H₂O. Give the mole ratio of H₂C₂O₄ to MnO₄⁻. Each carbon atom in H₂C₂O₄ goes from +3 to +4. How many electrons does one H₂C₂O₄ lose?

Slide 4 of 9 · Endpoint: a faint pink that stays

Key ideas

MnO₄⁻ ions are deep . Mn²⁺ ions at 0.010 mol/L are , and pale pink at 1.0 mol/L (Data Booklet, p. 11).

Before the reaction is complete, Fe²⁺ reduces each drop of MnO₄⁻, so the purple of the drop . The acid in the flask supplies the in the equation.

When all the Fe²⁺ has reacted, the next drop leaves a faint pink-purple colour that . This is the , and permanganate needs no extra indicator.

Equivalence is calculated, and the endpoint is . A deep pink means the titre is too .

Example

A permanganate solution is added from a buret to Fe²⁺(aq) in a flask. What does the flask look like before the reaction is complete, and what tells you to stop?

Try it

A student keeps adding permanganate until the flask is deep pink. Is the titre too large, too small or correct? Explain.

Slide 5 of 9 · The titration calculation

Key ideas

Concentration is moles per litre, so change every volume from mL to L first. Divide by . For example, 18.50 mL = L.

The plan is moles of titrant, then the , then moles of analyte, then .

Moles of titrant: n = , where c is concentration in mol/L and V is volume in .

Write the ratio fraction with the substance on top. Divide the moles of analyte by the volume, never by the titre.

Example

Given the equation MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 25.00 mL sample of Fe²⁺(aq) is titrated with 0.0200 mol/L MnO₄⁻(aq). The average titre is 18.50 mL. Find c(Fe²⁺) in mol/L.

Try it

Given the same equation. A 20.00 mL sample of Fe²⁺(aq) is titrated with 0.0250 mol/L MnO₄⁻(aq). The average titre is 16.80 mL. Find c(Fe²⁺) in mol/L.

Slide 6 of 9 · Method: how to do a redox titration calculation

Key ideas

Step 1. the trials that agree within the limit.

Step 2. Change to by dividing by 1000.

Step 3. Find n = for the solution you know.

Step 4. Use the mole from the balanced equation, with the wanted substance on top.

Step 5. Find the unknown with c = n ÷ V. Use the volume of the in the flask.

Check: multiply back. c × V must give the you found.

Example

Use the method on 25.00 mL of Fe²⁺(aq) titrated with 0.0200 mol/L MnO₄⁻(aq). The average titre is 18.50 mL. The equation is MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Find c(Fe²⁺).

Try it

Use the method on 20.00 mL of a Fe²⁺ solution that needs 15.00 mL of 0.0200 mol/L MnO₄⁻ with the same equation. Find c(Fe²⁺).

Slide 7 of 9 · Your turn: a different ratio

Key ideas

The steps are the same for every titration, but the ratio comes from the .

In 5H₂C₂O₄ + 2MnO₄⁻ + 6H⁺ → 10CO₂ + 2Mn²⁺ + 8H₂O, H₂C₂O₄ to MnO₄⁻ is , so we multiply by .

The ratio goes from the substance to the substance, with the coefficient of the wanted substance on top.

Two common slips are a wrong ratio and an upside-down . Check by multiplying the answer by the flask .

Example

Given 5H₂C₂O₄ + 2MnO₄⁻ + 6H⁺ → 10CO₂ + 2Mn²⁺ + 8H₂O. A 20.00 mL sample of H₂C₂O₄(aq) needs 16.30 mL of 0.0150 mol/L MnO₄⁻(aq) to reach the endpoint. Find c(H₂C₂O₄) in mol/L.

Try it

Given the same equation. A 25.00 mL sample of H₂C₂O₄(aq) needs 14.50 mL of 0.0120 mol/L MnO₄⁻(aq) to reach the endpoint. Find c(H₂C₂O₄) in mol/L.

Slide 8 of 9 · An aliquot from a larger solution

Key ideas

A measured part of a larger solution is called an . The moles found by titrating it are the moles in the only.

Whole ÷ part = whole volume ÷ . Here 100.0 mL ÷ 20.00 mL = .

The whole solution has the concentration, so it holds times the moles of the aliquot.

Mass = n × M, where M is molar mass in . Mass percent = mass of iron ÷ × 100.

Example

An iron tablet of mass 0.800 g is dissolved and made up to 100.0 mL of Fe²⁺(aq). A 20.00 mL aliquot needs 14.10 mL of 0.0200 mol/L MnO₄⁻(aq). The equation is MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Find the mass of iron in the tablet and the mass percent of iron (Fe: 55.85 g/mol).

Try it

Given the same equation. An iron tablet of mass 0.500 g is dissolved and made up to 250.0 mL of Fe²⁺(aq). A 25.00 mL aliquot needs 13.40 mL of 0.0100 mol/L MnO₄⁻(aq). Find the mass of iron in the tablet and the mass percent of iron (Fe: 55.85 g/mol).

Slide 9 of 9 · Which way does an error push the answer?

Key ideas

Follow the chain. The titre sets the moles of , which set the moles of analyte, which set the .

Adding too much titrant makes the titre too , so the calculated c(Fe²⁺) is too .

A buret rinsed with water makes the titrant weaker, so more volume is needed and the titre is too large. The calculation still uses the concentration, so c is too high.

A wet flask adds no moles of Fe²⁺, so the result is . For each error, mark every step larger, smaller or unchanged.

Example

A student rinses the buret with water, then fills it with 0.0200 mol/L MnO₄⁻(aq) and titrates Fe²⁺(aq). Is the calculated c(Fe²⁺) too high, too low or unchanged? Follow the chain.

Try it

A student stops the titration just before the faint pink colour appears. Is the calculated c(Fe²⁺) too high, too low or unchanged? Follow the chain.

Practice 1

Given buret readings: initial 2.15 mL and final 21.85 mL. Find the titre.

Practice 2

Given MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 25.00 mL sample of Fe²⁺(aq) needs 22.40 mL of 0.0150 mol/L MnO₄⁻(aq). Find c(Fe²⁺) in mol/L.

Practice 3

Given 5H₂C₂O₄ + 2MnO₄⁻ + 6H⁺ → 10CO₂ + 2Mn²⁺ + 8H₂O. A 10.00 mL sample of H₂C₂O₄(aq) needs 12.60 mL of 0.0200 mol/L MnO₄⁻(aq). Find c(H₂C₂O₄) in mol/L.

Practice 4

Given MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 10.00 mL aliquot from a 250.0 mL flask of Fe²⁺(aq) needs 15.60 mL of 0.0100 mol/L MnO₄⁻(aq). Find the mass of iron in the whole flask (Fe: 55.85 g/mol, Alberta Chemistry 30 Data Booklet).

Practice 5

A student reads the final buret reading 0.50 mL too large in a permanganate titration of Fe²⁺. Is the calculated c(Fe²⁺) too high, too low or unchanged? Explain with the chain of calculation.

Practice 6

Explain why a permanganate titration of iron(II) needs no added indicator, and describe the endpoint colour.

Practice 7

Challenge: Given Cr₂O₇²⁻ + 14H⁺ + 6Fe²⁺ → 2Cr³⁺ + 7H₂O + 6Fe³⁺. An iron sample is dissolved and made up to 100.0 mL. A 20.00 mL aliquot needs 14.80 mL of 0.0100 mol/L Cr₂O₇²⁻(aq). Find the mass of iron in the whole sample, in grams, to three significant digits (M(Fe) = 55.85 g/mol, from the Data Booklet).