B9 · Worked examples
In an aqueous solution, water is present as well as the ions, so water can react too. E° (say “E naught”) is a standard reduction potential in volts (V). Standard means 1.0 mol/L, 25.00 °C and 101.325 kPa. E°reaction is E°cathode − E°anode. A negative value means a power source is needed. Reduction happens at the cathode and oxidation at the anode. The symbol e⁻ means an electron. An ion’s charge is written number then sign, as in Cu²⁺. Inert electrodes, such as carbon, do not react. The Data Booklet electrode table is printed on p. 7 and the colour table on p. 11.
Open the B9 lesson · B9 slide notes
Worked question types
Each example shows every step, why you do it, and the idea behind it.
Question typeList every species that can react and write the water half-reactions
Use this when: The question gives a salt dissolved in water, with inert electrodes, and asks which species can react at each electrode.
Example. KI(aq) is electrolyzed with inert electrodes. Table values: E°(K⁺/K) = −2.93 V and E°(I₂/I⁻) = +0.54 V. Water is reduced in the row 2H₂O + 2e⁻ → H₂ + 2OH⁻, with E°(H₂O/H₂) = −0.83 V. The row O₂ + 4H⁺ + 4e⁻ → 2H₂O, with E°(O₂/H₂O) = +1.23 V, is used in reverse for oxidation. List every species that could react at each electrode. Write the water half-reaction for each electrode. Say which comparison decides each electrode.
- List what is in the beaker.
Use Method: how to predict the products of electrolysis of a solution. The solution has K⁺ ions, I⁻ ions and water molecules. Water is present, so it can react at either electrode.
K⁺, I⁻ and H₂O
- List the species that can be reduced at the cathode.
Reduction means gaining electrons. Cations and water can gain them. I⁻ is already as reduced as it can be.
cathode choices: K⁺ (−2.93 V) and H₂O (−0.83 V)
- List the species that can be oxidized at the anode.
Oxidation means losing electrons. Anions and water can lose them. The cation K⁺ is not oxidized here.
anode choices: I⁻ (+0.54 V) and H₂O (+1.23 V)
- Write the water half-reaction for the cathode.
Water gains electrons and makes hydrogen gas and hydroxide ions.
2H₂O + 2e⁻ → H₂ + 2OH⁻
- Write the water half-reaction for the anode.
This is the O₂ row run backwards. Water loses electrons and makes oxygen gas and hydrogen ions.
2H₂O → O₂ + 4H⁺ + 4e⁻
- Say which comparison decides.
At the cathode, the highest value is reduced. At the anode, the lowest value is oxidized.
cathode: highest anode: lowest
Why this works. In a molten salt each electrode had only one choice. In water, each electrode has a competition. The strongest oxidizing agent is reduced at the cathode, and the strongest reducing agent is oxidized at the anode.
Check your answer. Both water half-reactions balance. The first has 4 H and 2 O on each side with charge −2. The second has 4 H and 2 O on each side with charge 0.
Common mistake. Leaving water out of the list. Water can react at both electrodes in every aqueous cell.
Answer: Cathode: K⁺ or H₂O, with 2H₂O + 2e⁻ → H₂ + 2OH⁻. Anode: I⁻ or H₂O, with 2H₂O → O₂ + 4H⁺ + 4e⁻. Cathode: highest value. Anode: lowest value
Question typeChoose what is reduced at the cathode
Use this when: The question names an aqueous salt with inert electrodes and asks what is reduced at the cathode.
Example. Inert electrodes are used in AgNO₃(aq), in MgCl₂(aq) and in NiSO₄(aq). Table values: E°(Ag⁺/Ag) = +0.80 V, E°(Mg²⁺/Mg) = −2.37 V, E°(Ni²⁺/Ni) = −0.26 V and E°(H₂O/H₂) = −0.83 V. For each solution, decide what is reduced at the cathode and write the half-reaction.
- Write the water value as the dividing line.
Water is always a possible oxidizing agent at the cathode. A cation with a higher value than water is predicted to win.
water: −0.83 V
- Test AgNO₃(aq).
Ag⁺ is +0.80 V. That is higher than −0.83 V, so the metal ion is reduced.
Ag⁺ + e⁻ → Ag
- Test MgCl₂(aq).
Mg²⁺ is −2.37 V. That is lower than −0.83 V, so water is reduced and no magnesium forms.
2H₂O + 2e⁻ → H₂ + 2OH⁻
- Test NiSO₄(aq).
Ni²⁺ is −0.26 V. That is higher than −0.83 V, so the metal ion is reduced.
Ni²⁺ + 2e⁻ → Ni
- Compare numbers every time.
Do not rely on a memorized list. Check each cation against the printed values. A close call, such as Zn²⁺ at −0.76 V against water at −0.83 V, is a weak prediction.
above −0.83 V: metal predicted. below −0.83 V: water
Why this works. The dividing line is the water value, −0.83 V. A cation above that line is predicted to be reduced before water. A cation below it loses to water, so hydrogen gas and hydroxide ions form instead of the metal.
Check your answer. Silver and nickel are well above −0.83 V, so metal is predicted. Magnesium is far below it. A close call such as Zn²⁺ (−0.76 V) would be a weak prediction.
Common mistake. Reducing a metal that sits below water in the table. A solution of Mg²⁺ never gives magnesium metal.
Answer: AgNO₃(aq): Ag⁺ + e⁻ → Ag. MgCl₂(aq): 2H₂O + 2e⁻ → H₂ + 2OH⁻. NiSO₄(aq): Ni²⁺ + 2e⁻ → Ni
Question typeChoose what is oxidized at the anode
Use this when: The question names an aqueous salt and an anode, and asks what is oxidized at the anode.
Example. Decide what is oxidized at the anode in each case. Case 1: MgI₂(aq) with inert electrodes. Case 2: NiSO₄(aq) with inert electrodes. Case 3: NiSO₄(aq) with a nickel anode. Table values: E°(I₂/I⁻) = +0.54 V, E°(Ni²⁺/Ni) = −0.26 V and E°(O₂/H₂O) = +1.23 V.
- Check what the anode is made of.
An inert anode takes no part. A reactive metal anode can be oxidized itself.
cases 1 and 2: inert case 3: nickel
- Case 1: list the choices.
The choices are I⁻ (+0.54 V) and water (+1.23 V). At the anode, the lowest value is oxidized.
+0.54 < +1.23: iodide is oxidized
- Case 1: write the half-reaction.
Iodine forms as I₂, so two I⁻ each give up 1 electron.
2I⁻ → I₂ + 2e⁻
- Case 2: list the choices.
The booklet shows sulfate only as a reduction that needs H⁺. So at an anode we treat sulfate as not oxidized. Only water can be oxidized.
water is oxidized
- Case 2: write the half-reaction.
Water makes oxygen gas and H⁺. H⁺ made means the pH falls near the anode.
2H₂O → O₂ + 4H⁺ + 4e⁻
- Case 3: compare the electrode with water.
Nickel is −0.26 V. That is lower than water at +1.23 V, so nickel is the stronger reducing agent.
Ni → Ni²⁺ + 2e⁻, and the anode loses mass
Why this works. At the anode the species with the lowest reduction value gives up electrons most easily. That species can be an anion, water, or the electrode itself. The booklet shows sulfate and nitrate only as reductions that need H⁺, so we treat them as not oxidized. Water reacts when they are the only anions.
Check your answer. In each case the chosen species has a lower value than water’s +1.23 V, or water is the only choice.
Common mistake. Picking the highest value at the anode. At the cathode pick the highest. At the anode pick the lowest.
Answer: Case 1: 2I⁻ → I₂ + 2e⁻. Case 2: 2H₂O → O₂ + 4H⁺ + 4e⁻. Case 3: Ni → Ni²⁺ + 2e⁻
Question typePredict from the table, then check the chloride exception
Use this when: The question gives an aqueous chloride with inert electrodes and asks for the product the table predicts, the product that is observed, and the reason for any difference.
Example. KCl(aq) is electrolyzed with inert electrodes. Table values: E°(K⁺/K) = −2.93 V, E°(Cl₂/Cl⁻) = +1.36 V, E°(O₂/H₂O) = +1.23 V and E°(H₂O/H₂) = −0.83 V. State the gas the table predicts at the anode. State the gas that is observed. Explain the difference. Write the observed cell reaction and E°reaction.
- Compare the cathode choices.
K⁺ is −2.93 V and water is −0.83 V. Water is higher, so water is reduced.
cathode: 2H₂O + 2e⁻ → H₂ + 2OH⁻
- Predict the anode from the table.
The choices are Cl⁻ (+1.36 V) and water (+1.23 V). At the anode the lower value is oxidized.
+1.23 < +1.36: water, so O₂ is predicted
- Check for a known exception.
In a real cell with chloride ions, chlorine gas forms at the anode. This is called the chloride anomaly.
observed: Cl₂
- Explain with overvoltage.
Overvoltage is the extra voltage a reaction needs to run at a useful rate. Oxidizing water needs a greater overvoltage than oxidizing chloride.
chloride reacts first
- Write the observed anode half-reaction.
Chlorine forms as Cl₂, so two Cl⁻ each give up 1 electron.
2Cl⁻ → Cl₂ + 2e⁻
- Match the electrons.
The water half has 2e⁻ and the chloride half has 2e⁻. The smallest number both go into is 2.
2 and 2 → 2
- Check the multipliers.
Both halves already have the same number of electrons, so neither is multiplied.
× 1 and × 1
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
2H₂O + 2e⁻ + 2Cl⁻ → H₂ + 2OH⁻ + Cl₂ + 2e⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: e⁻ → 2H₂O + 2Cl⁻ → H₂ + 2OH⁻ + Cl₂
- Check atoms and charge.
Both must match on the two sides.
charge: −2 = −2 ✓ atoms: H 4, O 2, Cl 2 ✓
- Subtract for the observed reaction.
Cathode is water. Anode is the Cl₂/Cl⁻ pair.
E°reaction = −0.83 − (+1.36) = −2.19 V
- Compare with the table prediction.
If water were oxidized, the value would be smaller in size. The real cell must also supply the overvoltage.
water oxidized: −2.06 V. chloride oxidized: −2.19 V
Why this works. An E° prediction is a first prediction. The table gives the order in an ideal case. The need for overvoltage can change which reaction really happens, so check for known exceptions such as chloride.
Check your answer. The two anode values are only 0.13 V apart. Close values are where an exception is most likely.
Common mistake. Thinking the table minimum voltage is enough. The table minimum voltage may not be enough to make water react, because an extra overvoltage is needed.
Answer: The table predicts O₂. Cl₂ is observed because the overvoltage for oxidizing water is greater than for chloride. 2H₂O + 2Cl⁻ → H₂ + 2OH⁻ + Cl₂, E°reaction = −2.19 V
Question typePredict the products and the minimum voltage for an aqueous salt
Use this when: The question names an aqueous salt and inert electrodes and asks for the product at each electrode, the cell reaction, E°reaction and what you would observe.
Example. NiBr₂(aq) is electrolyzed with inert electrodes. Table values: E°(Ni²⁺/Ni) = −0.26 V, E°(Br₂/Br⁻) = +1.07 V, E°(H₂O/H₂) = −0.83 V and E°(O₂/H₂O) = +1.23 V. Predict the product at each electrode. Write the cell reaction and E°reaction. State what you would observe. The colour table lists nickel(II) as blue-green at 1.0 mol/L.
- Choose the cathode reaction.
The choices are Ni²⁺ (−0.26 V) and water (−0.83 V). The higher value is reduced.
−0.26 > −0.83: Ni²⁺ + 2e⁻ → Ni
- Choose the anode reaction.
The choices are Br⁻ (+1.07 V) and water (+1.23 V). The lower value is oxidized. This is not a chloride case, so there is no exception.
+1.07 < +1.23: 2Br⁻ → Br₂ + 2e⁻
- Match the electrons.
The nickel half has 2e⁻ and the bromine half has 2e⁻. The smallest number both go into is 2.
2 and 2 → 2
- Check the multipliers.
Both halves already have the same number of electrons, so neither is multiplied.
× 1 and × 1
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
Ni²⁺ + 2e⁻ + 2Br⁻ → Ni + Br₂ + 2e⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: e⁻ → Ni²⁺ + 2Br⁻ → Ni + Br₂
- Check atoms and charge.
Both must match on the two sides.
charge: 0 = 0 ✓ atoms: Ni 1, Br 2 ✓
- Subtract.
Cathode minus anode.
E°reaction = −0.26 − (+1.07) = −1.33 V
- State the minimum voltage.
Drop the sign.
the source must supply more than 1.33 V
- Predict the observations.
Nickel metal forms on the cathode, so it gains mass. Brown-orange colour appears near the anode. Blue-green Ni²⁺ fades. No H⁺ or OH⁻ is made, so no pH change is predicted from the equation.
observe: deposit, colour. infer: Ni and Br₂
- Keep observation and inference apart.
Deposit, colour and mass are observed. Naming the products is an inference from the half-reactions.
observation ≠ inference
Why this works. The same method works every time: list the species, compare values at each electrode, write the halves, match the electrons and subtract. The numbers decide the products, not the type of salt.
Check your answer. Atoms and charge match: nickel 1, bromine 2 and charge 0 on each side.
Common mistake. Writing hydrogen at the cathode out of habit. A cation above water in the table is reduced instead.
Answer: Ni²⁺ + 2Br⁻ → Ni + Br₂. E°reaction = −1.33 V. The source must supply more than 1.33 V
Question typePredict what is seen when the electron counts differ
Use this when: The question names an aqueous salt with inert electrodes where one half moves more electrons than the other, and asks for the cell reaction and observations.
Example. AgNO₃(aq) is electrolyzed with inert carbon electrodes. Table values: E°(Ag⁺/Ag) = +0.80 V, E°(H₂O/H₂) = −0.83 V and E°(O₂/H₂O) = +1.23 V. Write the half-reactions and the cell reaction. Find E°reaction. Predict the mass, gas and pH changes.
- Choose the cathode reaction.
Ag⁺ is +0.80 V and water is −0.83 V. Ag⁺ is higher, so it is reduced.
Ag⁺ + e⁻ → Ag
- Choose the anode reaction.
The booklet shows nitrate only as a reduction that needs H⁺. So at an anode we treat nitrate as not oxidized. Water is the only choice.
2H₂O → O₂ + 4H⁺ + 4e⁻
- Match the electrons.
The silver half has 1e⁻ and the water half has 4e⁻. The smallest number both go into is 4.
1 and 4 → 4
- Multiply each half.
Multiply every term of the silver half by 4 and every term of the water half by 1.
silver × 4: 4Ag⁺ + 4e⁻ → 4Ag | water × 1: 2H₂O → O₂ + 4H⁺ + 4e⁻
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
4Ag⁺ + 4e⁻ + 2H₂O → 4Ag + O₂ + 4H⁺ + 4e⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: e⁻ → 4Ag⁺ + 2H₂O → 4Ag + O₂ + 4H⁺
- Check atoms and charge.
Both must match on the two sides.
charge: +4 = +4 ✓ atoms: Ag 4, H 4, O 2 ✓
- Subtract.
Do not multiply the table values by the 4.
E°reaction = +0.80 − (+1.23) = −0.43 V
- Predict the observations.
Silver forms on the cathode, so the cathode gains mass. Oxygen bubbles form at the anode. H⁺ is made at the anode, so the pH falls there.
mass up at the cathode, bubbles at the anode, pH falls
- Predict the overall change in the solution.
Ag⁺ is used up and H⁺ is made. The solution becomes more acidic.
more acidic
Why this works. The anode half moves 4 electrons and each silver half moves 1, so the silver half is multiplied by 4. The voltage is energy per coulomb, so it is not multiplied.
Check your answer. Atoms and charge match: silver 4, hydrogen 4, oxygen 2 and charge +4 on each side.
Common mistake. Multiplying E° by 4 because the silver half was multiplied by 4. A table value is never multiplied.
Answer: 4Ag⁺ + 2H₂O → 4Ag + O₂ + 4H⁺. E°reaction = −0.43 V. The cathode gains mass, O₂ bubbles at the anode, and the pH falls
Question typeCheck whether the anode is reactive before you decide
Use this when: The question names an electrode made of a metal, and asks for the reactions and the mass and colour changes.
Example. CuSO₄(aq) is electrolyzed. The anode is a copper bar and the cathode is a carbon rod. Table values: E°(Cu²⁺/Cu) = +0.34 V, E°(H₂O/H₂) = −0.83 V and E°(O₂/H₂O) = +1.23 V. Write the half-reaction at each electrode. Predict the mass change of each electrode and the change in the blue colour.
- Choose the cathode reaction.
The choices are Cu²⁺ (+0.34 V) and water (−0.83 V). The higher value is reduced.
Cu²⁺ + 2e⁻ → Cu
- List the anode choices.
We treat sulfate as not oxidized, so it is not a choice. The other choices are water and the copper electrode itself.
water +1.23 V, copper +0.34 V
- Choose the anode reaction.
The lowest value is oxidized. Copper is lower than water, so the copper bar dissolves.
Cu → Cu²⁺ + 2e⁻
- Predict the masses.
Copper metal forms on the carbon rod, so its mass rises. The copper bar loses mass.
carbon rod gains mass, copper bar loses mass
- Predict the colour.
The anode makes Cu²⁺ as fast as the cathode uses it. The blue colour stays about the same.
blue colour about the same
- Find E°reaction.
The same half-cell works at both electrodes, so both values are the same.
E°reaction = +0.34 − (+0.34) = 0.00 V
Why this works. A reactive metal anode can be oxidized instead of water. The reaction is then a transfer of copper from one electrode to the other, as in refining. An inert anode would react with water instead.
Check your answer. The copper lost from the bar equals the copper gained by the rod, because the halves are exact reverses.
Common mistake. Oxidizing water at the anode without checking what the anode is made of. A reactive anode can be oxidized itself.
Answer: Cathode: Cu²⁺ + 2e⁻ → Cu, and it gains mass. Anode: Cu → Cu²⁺ + 2e⁻, and it loses mass. Blue colour about the same. E°reaction = 0.00 V
Question typeFind the overall reaction and the gas ratio when only water reacts
Use this when: The question names an aqueous salt whose ions do not react, and asks for the overall reaction, the gases and their amounts.
Example. K₂SO₄(aq) is electrolyzed with inert electrodes. Table values: E°(K⁺/K) = −2.93 V, E°(H₂O/H₂) = −0.83 V and E°(O₂/H₂O) = +1.23 V. Write the half-reactions and the overall reaction. Which gas forms in the larger amount? When 0.30 mol of O₂ forms, how many moles of H₂ form and how many moles of water are used?
- Choose the cathode reaction.
K⁺ is −2.93 V, which is lower than water at −0.83 V. Water is reduced.
2H₂O + 2e⁻ → H₂ + 2OH⁻
- Choose the anode reaction.
The booklet shows sulfate only as a reduction that needs H⁺, so we treat it as not oxidized. Water is the only choice.
2H₂O → O₂ + 4H⁺ + 4e⁻
- Match the electrons.
The cathode half moves 2 electrons and the anode half moves 4. Double the cathode half.
4H₂O + 4e⁻ → 2H₂ + 4OH⁻
- Add the halves and cancel the electrons.
List every term. The electrons cancel.
6H₂O → 2H₂ + O₂ + 4OH⁻ + 4H⁺
- Combine H⁺ and OH⁻.
Four H⁺ and four OH⁻ make four H₂O. Cancel four H₂O from each side.
6H₂O − 4H₂O → 2H₂ + O₂ and so 2H₂O → 2H₂ + O₂
- Read the gas ratio.
The coefficients say 2 mol of H₂ form for each 1 mol of O₂. Hydrogen forms in the larger amount.
H₂ : O₂ = 2 : 1
- Use the ratio.
0.30 mol O₂ × (2 mol H₂ ÷ 1 mol O₂) = 0.60 mol H₂. Two H₂O are used for each O₂.
H₂: 0.60 mol H₂O: 0.60 mol
Why this works. The salt is not used up. It only helps the water conduct. Water is reduced at one electrode and oxidized at the other, so the overall change is the break-up of water into hydrogen and oxygen.
Check your answer. Second route: 0.30 mol of O₂ takes 4 × 0.30 = 1.20 mol of electrons. Each H₂ needs 2 electrons, so 0.60 mol of H₂ ✓.
Common mistake. Leaving the H⁺ and OH⁻ in the final equation. They combine to form water, which cancels.
Answer: 2H₂O → 2H₂ + O₂. Hydrogen forms in the larger amount. 0.60 mol of H₂ and 0.60 mol of water
Diploma-style questions
Try each question first. Then open the worked solution.
Numerical response · outcome 30-B2.1kCoI₂(aq) is electrolyzed with inert electrodes. Table values: E°(Co²⁺/Co) = −0.28 V, E°(I₂/I⁻) = +0.54 V, E°(H₂O/H₂) = −0.83 V and E°(O₂/H₂O) = +1.23 V. What is the smallest voltage that the power source must exceed? Record your answer as a.bc V. Enter the digits a, b and c.
Show the worked solution (try the question first)
- Choose the cathode reaction.
Co²⁺ (−0.28 V) is higher than water (−0.83 V), so Co²⁺ is reduced.
Co²⁺ + 2e⁻ → Co
- Choose the anode reaction.
I⁻ (+0.54 V) is lower than water (+1.23 V), so I⁻ is oxidized.
2I⁻ → I₂ + 2e⁻
- Subtract.
Cathode minus anode.
E°reaction = −0.28 − (+0.54) = −0.82 V
- Drop the sign.
A voltage that a source supplies is positive.
more than 0.82 V
- Enter the digits.
The value is 0.82, so a = 0, b = 8 and c = 2.
record 0 8 2
Answer: E°reaction = −0.82 V, so the source must supply more than 0.82 V. Record 0 8 2.
Multiple choice · outcome 30-B2.1sEach solution is electrolyzed with inert electrodes. Table values: E°(Al³⁺/Al) = −1.66 V, E°(Ca²⁺/Ca) = −2.87 V, E°(Ni²⁺/Ni) = −0.26 V, E°(K⁺/K) = −2.93 V and E°(H₂O/H₂) = −0.83 V. Which solution forms a metal at the cathode?
- A. Al(NO₃)₃(aq)
- B. CaCl₂(aq)
- C. NiSO₄(aq)
- D. KI(aq)
Show the worked solution (try the question first)
- Compare each cation with water.
A metal forms only if its cation has a higher value than water at −0.83 V.
Al³⁺ −1.66, Ca²⁺ −2.87, Ni²⁺ −0.26, K⁺ −2.93
- Choose the one above water.
Only Ni²⁺ is higher than −0.83 V.
answer C
Why each choice is right or wrong
- A. Al³⁺ is −1.66 V, which is lower than water at −0.83 V. Water is reduced and hydrogen forms.
- B. Ca²⁺ is −2.87 V, which is lower than water. Water is reduced and hydrogen forms.
- C. Correct. Ni²⁺ is −0.26 V, which is higher than water at −0.83 V. Nickel metal forms.
- D. K⁺ is −2.93 V, which is lower than water. Water is reduced at the cathode.
Answer: C
Multiple choice · outcome 30-B2.4kKCl(aq) is electrolyzed with inert electrodes. Table values: E°(Cl₂/Cl⁻) = +1.36 V and E°(O₂/H₂O) = +1.23 V. Which statement about the gas at the anode is correct?
- A. O₂ forms, because water has the lower value than chloride.
- B. Cl₂ forms, because the overvoltage for oxidizing water is greater than for chloride.
- C. Cl₂ forms, because chloride has the higher value, and the higher value is oxidized first at the anode.
- D. O₂ forms, because the overvoltage for oxidizing chloride is greater than for water.
Show the worked solution (try the question first)
- Write the table prediction.
Water (+1.23 V) is lower than chloride (+1.36 V), so the table predicts oxygen.
predicted: O₂
- Check for the exception.
Chlorine is what forms in a real cell. Oxidizing water needs a greater overvoltage than oxidizing chloride.
observed: Cl₂
- Choose B.
It gives the observed gas and the reason.
answer B
Why each choice is right or wrong
- A. This is the prediction from the table alone. In a real cell with chloride, chlorine is observed, so the table prediction fails here.
- B. Correct. Overvoltage makes water harder to oxidize than chloride, so Cl₂ forms.
- C. The anode rule picks the lowest value, not the highest. The reason for Cl₂ is overvoltage, not a high value.
- D. This reverses the overvoltage idea. Water needs the greater overvoltage, not chloride.
Answer: B
Multiple choice · outcome 30-B2.4kLi₂SO₄(aq) is electrolyzed with inert electrodes. Only water reacts at both electrodes. Which statement about the pH near each electrode is correct?
- A. The pH rises near both electrodes.
- B. The pH rises near the cathode and falls near the anode.
- C. The pH falls near the cathode and rises near the anode.
- D. The pH stays the same everywhere, because the ions do not react.
Show the worked solution (try the question first)
- Write the cathode half-reaction.
Water is reduced and makes OH⁻. OH⁻ made means the pH rises.
2H₂O + 2e⁻ → H₂ + 2OH⁻: pH rises
- Write the anode half-reaction.
Water is oxidized and makes H⁺. H⁺ made means the pH falls.
2H₂O → O₂ + 4H⁺ + 4e⁻: pH falls
- Choose B.
It matches both predictions.
answer B
Why each choice is right or wrong
- A. The anode makes H⁺, not OH⁻. H⁺ made means the pH falls there.
- B. Correct. The cathode makes OH⁻, so the pH rises. The anode makes H⁺, so the pH falls.
- C. This swaps the electrodes. OH⁻ forms at the cathode and H⁺ forms at the anode.
- D. The ions do not react, but water does. The water half-reactions make OH⁻ and H⁺, so the pH changes near each electrode.
Answer: B