B9 · Electrolysis of aqueous solutions · Notes

Download the printable PDF

Goals: Decide what is reduced and what is oxidized when a solution is electrolyzed, using the table. Explain the chloride exception and why E° values are used with caution. Predict products, colour, mass and pH changes and write the cell reaction.

Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.

Slide 1 of 8 · Water joins the competition

Key ideas

In a molten salt only the salt ions can react. In a water solution, molecules are present too, so water can react at either electrode.

At the cathode, water can be reduced: 2H₂O + 2e⁻ → . Its table value is .

At the anode, water can be oxidized: 2H₂O → . This is the +1.23 V row written .

At the cathode, whatever has the table value is reduced. At the anode, whatever has the value is oxidized.

Example

An ionic compound is dissolved in water. The cell has two inert electrodes and a power source. What competes to be reduced at the cathode, and what competes to be oxidized at the anode?

Try it

In molten NaCl only Na⁺ and Cl⁻ can react. List everything that can react at each electrode when NaCl is dissolved in water instead.

Slide 2 of 8 · Choose the cathode reaction

Key ideas

Inert means the electrode does . Compare each cation with water at −0.83 V, and the one with the value is reduced.

In NaCl(aq), Na⁺ is −2.71 V and water is −0.83 V, so is reduced. The pH near the cathode , because OH⁻ is made.

In CuSO₄(aq), Cu²⁺ is , higher than water, so Cu²⁺ + 2e⁻ → . The cathode gains mass and the blue colour fades.

A cation with a value above is predicted to be reduced before water. A close call such as Zn²⁺ (−0.76 V) is only a prediction. Sodium, magnesium and aluminium lose to water.

Example

Aqueous NaCl is electrolyzed with inert electrodes. The table values are Na⁺ −2.71 V and water −0.83 V. What is reduced at the cathode, what is the half-reaction, and what happens to the pH near the cathode?

Try it

Aqueous CuSO₄ is electrolyzed with inert electrodes. The table values are Cu²⁺ +0.34 V and water −0.83 V. What is reduced, and what happens to the cathode mass and the blue colour?

Slide 3 of 8 · Choose the anode reaction

Key ideas

At the anode, compare the anions, water and a reactive . The one with the value is oxidized.

In NaI(aq), I⁻ (+0.54 V) is lower than water (+1.23 V), so 2I⁻ → I₂ + . Iodine makes the solution near the anode .

Sulfate has in the table as an oxidation, so only water reacts: 2H₂O → O₂ + + 4e⁻. The pH near the anode falls.

An ion that does not react at either electrode, such as Na⁺, is a ion. A reactive metal anode can be oxidized .

Example

Aqueous NaI is electrolyzed with inert electrodes. The values are I₂/I⁻ +0.54 V and water +1.23 V (O₂/H₂O row). What is oxidized at the anode, and what is seen near it?

Try it

CuSO₄(aq) has a copper anode. The values are Cu²⁺/Cu +0.34 V and water +1.23 V (O₂/H₂O row). What is oxidized at the anode, and what happens to the anode mass?

Slide 4 of 8 · The chloride exception and caution with E°

Key ideas

In NaCl(aq) the anode choices are Cl⁻ at and water at +1.23 V. Water is lower, so the table predicts .

In a real cell, gas forms: 2Cl⁻ → Cl₂ + . This difference is called the chloride .

Overvoltage is the a reaction needs to run at a useful rate. Water oxidation needs a overvoltage than chloride oxidation.

A table value is a first prediction, not a promise. The table minimum voltage be enough to make water react. Predict from the table, then check for known exceptions, like chloride.

Example

Aqueous NaCl is electrolyzed with inert electrodes. The values are Cl₂/Cl⁻ +1.36 V and O₂/H₂O +1.23 V. What gas does the table predict at the anode, what gas is observed, and why?

Try it

In aqueous NaCl, by how many volts do E°(Cl₂/Cl⁻) = +1.36 V and E°(O₂/H₂O) = +1.23 V differ? Which gas actually forms at the anode?

Slide 5 of 8 · Method: how to predict the products of electrolysis of a solution

Key ideas

Step 1. List every ion, and .

Step 2. Cathode: choose the reduction with the E°. Water is at .

Step 3. Anode: choose the oxidation with the E°. Water is at .

Step 4. Check for exceptions: and a reactive electrode.

Step 5. Write the halves, the overall equation and the observations. Close E° values are a prediction.

Example

Use the method on CuSO₄(aq) with inert carbon electrodes. Predict the product at each electrode and what is seen.

Try it

Use the method on KI(aq) with inert electrodes. E°(I₂/I⁻) = +0.54 V. What forms at each electrode?

Slide 6 of 8 · Your turn: aqueous sodium bromide

Key ideas

At the cathode, Na⁺ is −2.71 V and water is −0.83 V. Water is , so 2H₂O + 2e⁻ → H₂ + , and the pH rises.

At the anode, Br⁻ is +1.07 V and water is +1.23 V. Bromide is , so 2Br⁻ → Br₂ + . Brown-orange colour is observed near the anode.

Both half-reactions move electrons, so no multiplier is needed. Add the halves and cancel the electrons.

E°reaction = E°cathode − E°anode = −0.83 − (+1.07) = V. The power source must supply more than .

Example

Aqueous NaBr is electrolyzed with inert electrodes. The values are Na⁺ −2.71 V, water −0.83 V, Br₂/Br⁻ +1.07 V and O₂/H₂O +1.23 V. Predict the product at each electrode, write the cell reaction and find E°reaction and the minimum voltage.

Try it

Aqueous CuBr₂ is electrolyzed with inert electrodes. The values are Cu²⁺ +0.34 V, water −0.83 V, Br₂/Br⁻ +1.07 V and O₂/H₂O +1.23 V. Write the cell reaction and find E°reaction.

Slide 7 of 8 · Predict observations: copper sulfate

Key ideas

At the cathode, Cu²⁺ (+0.34 V) beats water (−0.83 V): Cu²⁺ + 2e⁻ → . The cathode mass and the blue colour fades.

At the anode, sulfate is not oxidized, so water is: 2H₂O → O₂ + + 4e⁻. Oxygen bubbles form and the pH .

The copper half moves 2 electrons and the water half moves 4. Multiply the copper half by so the electrons match. E° values are never .

Overall: 2Cu²⁺ + 2H₂O → 2Cu + O₂ + . E°reaction = 0.34 − 1.23 = V.

Example

CuSO₄(aq) is electrolyzed with inert carbon electrodes. The values are Cu²⁺ +0.34 V, water −0.83 V and O₂/H₂O +1.23 V. Predict what is seen at each electrode, write the cell reaction and find E°reaction.

Try it

AgNO₃(aq) is electrolyzed with inert electrodes. The values are Ag⁺ +0.80 V, water −0.83 V and O₂/H₂O +1.23 V. Nitrate is not oxidized. Write the cell reaction and find E°reaction.

Slide 8 of 8 · Sodium sulfate: when neither ion reacts

Key ideas

In Na₂SO₄(aq), Na⁺ is lower than water and sulfate is . So reacts at both electrodes.

Cathode: 2H₂O + 2e⁻ → H₂ + 2OH⁻, so the pH and red litmus turns blue. Anode: 2H₂O → O₂ + 4H⁺ + 4e⁻, so the pH and blue litmus turns red.

Double the cathode half so both halves move electrons: 4H₂O + 4e⁻ → + 4OH⁻.

Adding the halves, 4OH⁻ and 4H⁺ make 4H₂O. The overall reaction is 2H₂O → 2H₂ + O₂, so the mole ratio of H₂ to O₂ is .

Example

Na₂SO₄(aq) is electrolyzed with inert electrodes. Neither ion reacts. What happens at each electrode, and what is the overall reaction?

Try it

A cell with Na₂SO₄(aq) and inert electrodes makes 0.0300 mol of O₂. How many moles of H₂ form at the same time?

Practice 1

Given NaNO₃(aq) with inert electrodes, decide what is reduced at the cathode and write the half-reaction (Data Booklet table values: Na⁺ −2.71 V; water −0.83 V).

Practice 2

Given aqueous NaI with inert electrodes (Data Booklet table values: I₂/I⁻ +0.54 V; O₂/H₂O +1.23 V; water −0.83 V; Na⁺ −2.71 V). Write the half-reaction at each electrode, the cell reaction and E°reaction.

Practice 3

Aqueous NaCl is electrolyzed with inert electrodes. State the product at the anode that the table predicts, the product that is observed, and the reason for the difference.

Practice 4

Given NaBr(aq) with inert electrodes. Predict the colour change near the anode and the pH change near the cathode, and explain both with half-reactions.

Practice 5

Given CuSO₄(aq) with a copper cathode and a copper anode. Predict the change in mass of each electrode and the change in the blue colour (Data Booklet table values: Cu²⁺/Cu +0.34 V; O₂/H₂O +1.23 V; water −0.83 V).

Practice 6

Given Na₂SO₄(aq) with inert electrodes. Write the overall cell reaction and say which gas forms in the larger amount.

Practice 7

Challenge: Given a solution that contains Cu(NO₃)₂(aq) and Zn(NO₃)₂(aq), electrolyzed with inert electrodes. Nitrate ions do not react. Data Booklet table values: Cu²⁺/Cu +0.34 V; Zn²⁺/Zn −0.76 V; water reduced −0.83 V; O₂/H₂O +1.23 V. Which metal plates on the cathode first? Write both half-reactions and predict the pH change near the anode.