B8 · Worked examples

An electrolytic cell uses electrical energy from a power source to drive a reaction that is not spontaneous. E° (say “E naught”) is a standard reduction potential in volts (V). Standard means 1.0 mol/L, 25.00 °C and 101.325 kPa. E°reaction is E°cathode − E°anode, the same number as E°cell in B7. A positive E°reaction means the reaction goes by itself. Oxidation happens at the anode. Reduction happens at the cathode. The symbol e⁻ means an electron. An ion’s charge is written number then sign, as in Zn²⁺. The Data Booklet electrode table is printed on p. 7.

Open the B8 lesson · B8 slide notes

Worked question types

Each example shows every step, why you do it, and the idea behind it.

Question type

Show a reaction is not spontaneous and find the voltage a power source must exceed

Use this when: The question gives a reaction that is forced to run in an electrolytic cell and asks for E°reaction and the smallest voltage the source must supply.

Example. A power source forces Pb + Zn²⁺ → Pb²⁺ + Zn to run. Table values: E°(Zn²⁺/Zn) = −0.76 V and E°(Pb²⁺/Pb) = −0.13 V. Find E°reaction. What voltage must the power source exceed?
  1. Name the roles in the reaction as written.

    Zn²⁺ gains electrons, so it is reduced at the cathode. Pb loses electrons, so it is oxidized at the anode.

    cathode: Zn²⁺/Zn anode: Pb²⁺/Pb

  2. Subtract, cathode minus anode.

    Use each table value as printed. Keep the sign of the answer.

    E°reaction = −0.76 − (−0.13) = −0.63 V

  3. Read the sign.

    A negative value means the reaction does not go by itself. A cell that works this way is an electrolytic cell.

    not spontaneous as written

  4. State the minimum voltage.

    The source must push in at least this much. A minimum voltage is a positive number, so drop the sign.

    the source must supply more than 0.63 V

  5. Say why it must be more, not equal.

    Real cells need a little extra to beat resistance and other effects.

    applied voltage > 0.63 V

Why this works. A power source acts like a push uphill. A reaction with a negative E°reaction will not roll by itself, but enough electrical energy can force it. The size of the number tells you the smallest push.

Check your answer. The reverse reaction, Zn + Pb²⁺ → Zn²⁺ + Pb, would have E°reaction = +0.63 V, so it goes by itself.

Common mistake. Giving the minimum voltage as a negative number. A voltage that a source supplies is written as a positive number.

Answer: E°reaction = −0.63 V. The source must supply more than 0.63 V

Question type

Name the electrodes, the polarity and the movement of ions and electrons

Use this when: The question describes a power source joined to two electrodes in a liquid. It asks which electrode is the cathode, how the electrodes are charged, or how ions and electrons move.

Example. Two inert electrodes, X and Y, sit in molten lithium bromide, LiBr(l). The negative terminal of a power source is joined to X. The positive terminal is joined to Y. Name the cathode and the anode. Say which way the electrons and each ion move. Is a salt bridge needed?
  1. Follow the electrons from the source.

    The negative terminal pushes electrons out into the wire. They arrive at X.

    electrons flow into X

  2. Name the cathode.

    An electrode that gains electrons is reduced. Reduction happens at the cathode.

    X is the cathode (reduction), and it is negative

  3. Name the anode.

    Y hands electrons back to the source. Giving up electrons is oxidation, which happens at the anode.

    Y is the anode (oxidation), and it is positive

  4. Move the ions.

    Cations are positive ions. They move toward the negative cathode. Anions are negative ions. They move toward the positive anode.

    Li⁺ moves to X. Br⁻ moves to Y

  5. Say where the electrons travel.

    Electrons move only in the wires. In the liquid, the moving ions carry the charge.

    electrons in the wire, ions in the liquid

  6. Decide on a salt bridge.

    Both electrodes share one container, so the ions can move freely. No salt bridge or porous barrier is needed.

    no salt bridge

Why this works. The names anode and cathode come from the chemical change, not from a plus or minus sign. In an electrolytic cell the power source sets the electron direction, so the cathode is negative and the anode is positive.

Check your answer. Check the pair: the negative electrode attracts the positive ion, and the positive electrode attracts the negative ion.

Common mistake. Using the voltaic signs. In a voltaic cell the anode is negative. In an electrolytic cell the anode is positive.

Answer: Cathode X (negative): reduction, Li⁺ moves to X. Anode Y (positive): oxidation, Br⁻ moves to Y. Electrons move only in the wires. No salt bridge

Question type

Predict the products of a molten salt and find the minimum voltage

Use this when: The question names a molten ionic compound with inert electrodes and asks for the product at each electrode, the cell reaction and the smallest voltage.

Example. Molten lithium bromide, LiBr(l), is electrolyzed with inert electrodes. Table values: E°(Li⁺/Li) = −3.04 V and E°(Br₂/Br⁻) = +1.07 V. Name the product at each electrode. Write the cell reaction and find E°reaction. Give the voltage the source must exceed.
  1. List the ions.

    Use Method: how to describe an electrolytic cell. A molten salt has only its own ions and no water. Each electrode has only one species that can react.

    Li⁺ and Br⁻

  2. Send each ion to an electrode.

    The cation goes to the negative cathode. The anion goes to the positive anode.

    Li⁺ → cathode Br⁻ → anode

  3. Write the half-reactions.

    Li⁺ gains 1 electron. Bromine forms as Br₂, so two Br⁻ each give up 1 electron.

    Li⁺ + e⁻ → Li 2Br⁻ → Br₂ + 2e⁻

  4. Match the electrons.

    The lithium half has 1e⁻ and the bromine half has 2e⁻. The smallest number both go into is 2.

    1 and 2 → 2

  5. Multiply each half.

    Multiply every term of the lithium half by 2 and every term of the bromine half by 1.

    lithium × 2: 2Li⁺ + 2e⁻ → 2Li | bromine × 1: 2Br⁻ → Br₂ + 2e⁻

  6. Add the halves. Write every term before you cancel.

    List all the left terms and all the right terms.

    2Li⁺ + 2e⁻ + 2Br⁻ → 2Li + Br₂ + 2e⁻

  7. Cancel identical terms on opposite sides.

    Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.

    cancelled: e⁻ → 2Li⁺ + 2Br⁻ → 2Li + Br₂

  8. Check atoms and charge.

    Both must match on the two sides.

    charge: 0 = 0 ✓ atoms: Li 2, Br 2 ✓

  9. Name the products.

    Reduction makes the metal. Oxidation makes the halogen.

    lithium metal at the cathode, bromine gas at the anode

  10. Subtract.

    Do not multiply the table values by the 2.

    E°reaction = −3.04 − (+1.07) = −4.11 V

  11. State the minimum voltage.

    Drop the sign.

    the source must supply more than 4.11 V

Why this works. In a molten salt there is no competition, so the products are easy to predict. Volts are energy per coulomb, so doubling the lithium half does not double the voltage.

Check your answer. The sign is negative, so the reaction is not spontaneous. That is why a power source is needed.

Common mistake. Doubling E° when the half-reaction is doubled. The cell voltage does not depend on how many copies you write.

Answer: 2Li⁺ + 2Br⁻ → 2Li + Br₂. E°reaction = −4.11 V. The source must supply more than 4.11 V. Li at the cathode, Br₂ at the anode

Question type

Use the same method on a new molten salt where the electrons already match

Use this when: The question names a molten salt whose two half-reactions move the same number of electrons, and asks for both half-reactions, the cell reaction and E°reaction.

Example. Molten calcium chloride, CaCl₂(l), is electrolyzed with inert electrodes. Table values: E°(Ca²⁺/Ca) = −2.87 V and E°(Cl₂/Cl⁻) = +1.36 V. Write the half-reaction at each electrode, the cell reaction and E°reaction.
  1. Decide which ion goes to which electrode.

    Write this before any half-reaction. Positive ions go to the negative cathode. Negative ions go to the positive anode.

    Ca²⁺ → cathode Cl⁻ → anode

  2. Write the cathode half-reaction.

    Ca²⁺ gains 2 electrons and becomes calcium metal.

    Ca²⁺ + 2e⁻ → Ca

  3. Write the anode half-reaction.

    Chlorine forms as Cl₂, so two Cl⁻ each give up 1 electron.

    2Cl⁻ → Cl₂ + 2e⁻

  4. Match the electrons.

    The calcium half has 2e⁻ and the chlorine half has 2e⁻. The smallest number both go into is 2.

    2 and 2 → 2

  5. Check the multipliers.

    Both halves already have the same number of electrons, so neither is multiplied.

    × 1 and × 1

  6. Add the halves. Write every term before you cancel.

    List all the left terms and all the right terms.

    Ca²⁺ + 2e⁻ + 2Cl⁻ → Ca + Cl₂ + 2e⁻

  7. Cancel identical terms on opposite sides.

    Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.

    cancelled: e⁻ → Ca²⁺ + 2Cl⁻ → Ca + Cl₂

  8. Check atoms and charge.

    Both must match on the two sides.

    charge: 0 = 0 ✓ atoms: Ca 1, Cl 2 ✓

  9. Subtract.

    Cathode value minus anode value. The cathode is calcium, not chlorine.

    E°reaction = −2.87 − (+1.36) = −4.23 V

  10. Check the order.

    Swapping the electrodes would give a positive number, as if the cell ran by itself. It does not.

    swapped: +4.23 V is wrong here

Why this works. Both halves move two electrons, so they add without any multiplier. The cell reaction is the reverse of a spontaneous reaction between calcium and chlorine, so E°reaction is negative.

Check your answer. The spontaneous reaction Ca + Cl₂ → Ca²⁺ + 2Cl⁻ has +4.23 V. The forced reaction has the opposite sign.

Common mistake. Swapping the electrodes and reporting a positive number. Check which electrode is the cathode before you subtract.

Answer: Ca²⁺ + 2Cl⁻ → Ca + Cl₂. E°reaction = −4.23 V. The source must supply more than 4.23 V

Question type

Compare a voltaic cell and an electrolytic cell for the same two half-cells

Use this when: The question gives one pair of half-cells and asks you to run it both ways and compare E°reaction, energy change, anode sign and the need for a salt bridge.

Example. Use the Ag⁺/Ag and Ni²⁺/Ni half-cells. Table values: E°(Ag⁺/Ag) = +0.80 V and E°(Ni²⁺/Ni) = −0.26 V. Give the reaction, E°reaction, the energy change, the sign of the anode and the need for a salt bridge for a voltaic cell and for an electrolytic cell.
  1. Find the voltaic direction.

    Ag⁺ has the higher value, so it is reduced at the cathode. Ni is oxidized at the anode.

    2Ag⁺ + Ni → 2Ag + Ni²⁺

  2. Subtract for the voltaic cell.

    Cathode minus anode.

    E°reaction = +0.80 − (−0.26) = +1.06 V

  3. Reverse the reaction for the electrolytic cell.

    A power source drives the reverse. Now Ni²⁺ is reduced at the cathode and Ag is oxidized at the anode.

    2Ag + Ni²⁺ → 2Ag⁺ + Ni

  4. Subtract again.

    The cathode is now Ni²⁺/Ni and the anode is Ag⁺/Ag.

    E°reaction = −0.26 − (+0.80) = −1.06 V

  5. Fill in the comparison from one fact.

    The sign of E°reaction, the spontaneous direction and the energy change always go together.

    voltaic: +1.06 V, spontaneous, chemical → electrical, anode negative, salt bridge needed. electrolytic: −1.06 V, not spontaneous, electrical → chemical, anode positive, no salt bridge

  6. Say what stays the same.

    Oxidation is at the anode and reduction is at the cathode in both cells.

    only the sign of the anode differs

Why this works. The same two half-cells can run either way. What decides the direction is whether the reaction goes by itself or a power source pushes it. The electrolytic E°reaction is the voltaic one with the opposite sign.

Check your answer. The two values are +1.06 V and −1.06 V. They have the same size and opposite signs.

Common mistake. Copying the voltaic anode sign onto an electrolytic cell. The anode is negative in a voltaic cell and positive in an electrolytic cell.

Answer: Voltaic: 2Ag⁺ + Ni → 2Ag + Ni²⁺, E°reaction = +1.06 V. Electrolytic: 2Ag + Ni²⁺ → 2Ag⁺ + Ni, E°reaction = −1.06 V

Question type

Plan an electroplating cell and predict the mass changes

Use this when: The question names an object to plate, a metal, a solution of its ions and a power source, and asks for the cathode, the half-reactions and the mass changes.

Example. A metal key is to be plated with nickel. The key and a nickel bar are placed in nickel(II) sulfate solution, NiSO₄(aq), and joined to a power source. Only nickel and its ions react. Which object is the cathode? Write both half-reactions. Predict the mass change of each object.
  1. Choose the cathode.

    Plating means metal ions are reduced onto the object. Reduction happens at the cathode, so the key is the cathode.

    key = cathode, joined to the negative terminal

  2. Write the cathode half-reaction.

    Nickel ions gain 2 electrons and stick to the key as nickel metal.

    Ni²⁺ + 2e⁻ → Ni

  3. Choose the anode.

    The nickel bar is joined to the positive terminal. A metal that can be oxidized dissolves.

    nickel bar = anode

  4. Write the anode half-reaction.

    Nickel metal loses 2 electrons and becomes Ni²⁺.

    Ni → Ni²⁺ + 2e⁻

  5. Predict the masses.

    Mass goes up where metal forms and down where metal dissolves.

    key gains mass, nickel bar loses mass

  6. Say what happens to the solution.

    The anode makes Ni²⁺ at the same rate the cathode uses it. The concentration stays nearly constant.

    nickel moves from the bar to the key

Why this works. Plating is an electrolytic cell with the object as the cathode. A bar of the plating metal as the anode replaces the ions that the cathode uses. An inert anode would not dissolve, so the solution would run short of ions.

Check your answer. The two half-reactions are exact reverses, so the same moles of nickel leave the bar as land on the key.

Common mistake. Making the object the anode. Then it would lose metal instead of gaining a coating.

Answer: The key is the cathode: Ni²⁺ + 2e⁻ → Ni, and it gains mass. The nickel bar is the anode: Ni → Ni²⁺ + 2e⁻, and it loses mass

Question type

Predict what happens to impurities when copper is refined

Use this when: The question names a refining cell and the impurity metals in the anode, with table values, and asks what happens to each impurity.

Example. Copper is refined in CuSO₄(aq). The anode is impure copper that contains Zn, Ni, Ag and Au. The cathode is a thin sheet of pure copper. Table values: E°(Cu²⁺/Cu) = +0.34 V, E°(Zn²⁺/Zn) = −0.76 V, E°(Ni²⁺/Ni) = −0.26 V, E°(Ag⁺/Ag) = +0.80 V and E°(Au³⁺/Au) = +1.50 V. Write the half-reaction at each electrode. Say what happens to each impurity.
  1. Write the anode half-reaction.

    Copper at the anode is oxidized.

    Cu → Cu²⁺ + 2e⁻

  2. Write the cathode half-reaction.

    Copper(II) ions are reduced, and pure copper builds up on the sheet.

    Cu²⁺ + 2e⁻ → Cu

  3. Compare each impurity with copper.

    A metal with a lower value than Cu²⁺/Cu is easier to oxidize than copper. It dissolves with the copper.

    Zn (−0.76) and Ni (−0.26) are below +0.34

  4. Find the impurities that are above copper.

    A metal with a higher value is harder to oxidize than copper. It stays as a solid.

    Ag (+0.80) and Au (+1.50) are above +0.34

  5. Say where each ends up.

    Dissolved ions stay in the solution. Solids fall to the bottom of the cell.

    Zn²⁺ and Ni²⁺ stay in solution. Ag and Au fall as sludge

Why this works. In refining, the voltage is kept so that copper is the metal that is mainly oxidized. Metals easier to oxidize than copper go into solution. Metals harder to oxidize than copper are left behind as solid.

Check your answer. Only the cathode gains pure copper, because only Cu²⁺ is reduced there. Zn²⁺ and Ni²⁺ stay in solution.

Common mistake. Saying every impurity dissolves. A metal with a value above Cu²⁺/Cu does not dissolve.

Answer: Cu → Cu²⁺ + 2e⁻ at the anode, Cu²⁺ + 2e⁻ → Cu at the cathode. Zn and Ni dissolve. Ag and Au fall as solid sludge

Question type

Handle a cell with the same metal at both electrodes

Use this when: The question gives two electrodes made of the same metal in a solution of its own ions and asks for the mass changes and E°reaction.

Example. Two nickel electrodes are placed in NiSO₄(aq) and joined to a power source. Only nickel and its ions react. Table value: E°(Ni²⁺/Ni) = −0.26 V. Name the cathode and anode, write each half-reaction, predict each mass change and find E°reaction.
  1. Decide the cathode.

    Reduction happens at the cathode. Nickel ions become nickel metal there.

    Ni²⁺ + 2e⁻ → Ni, and the cathode gains mass

  2. Decide the anode.

    Oxidation happens at the anode. Nickel metal becomes nickel ions there.

    Ni → Ni²⁺ + 2e⁻, and the anode loses mass

  3. Say what moves.

    Nickel moves from one electrode to the other. The solution stays about the same.

    nickel moves anode → cathode

  4. Find E°reaction.

    The same half-cell works at both electrodes, so both values are the same.

    E°reaction = −0.26 − (−0.26) = 0.00 V

  5. Say what zero means.

    There is no standard push in either direction. Only a small voltage above 0.00 V is needed, to beat resistance and other effects.

    a small applied voltage

Why this works. When both electrodes are one metal in its own ions, the two table values are identical. Their difference is zero. This is why plating and refining use little energy.

Check your answer. A large answer would show that a different pair of half-cells was used by mistake.

Common mistake. Subtracting two different table values. Both electrodes use the same half-cell, so the value is the same at each.

Answer: Cathode gains mass, anode loses mass. E°reaction = 0.00 V

Diploma-style questions

Try each question first. Then open the worked solution.

Numerical response · outcome 30-B2.1k
Molten magnesium bromide, MgBr₂(l), is electrolyzed with inert electrodes. Table values: E°(Mg²⁺/Mg) = −2.37 V and E°(Br₂/Br⁻) = +1.07 V. What is the smallest voltage that the power source must exceed? Record your answer as a.bc V. Enter the digits a, b and c.
Show the worked solution (try the question first)
  1. Send the ions to the electrodes.

    Mg²⁺ goes to the cathode. Br⁻ goes to the anode.

    cathode: Mg²⁺/Mg anode: Br₂/Br⁻

  2. Subtract, cathode minus anode.

    Use each table value as printed.

    E°reaction = −2.37 − (+1.07) = −3.44 V

  3. Drop the sign.

    A voltage that a source supplies is positive.

    greater than 3.44 V

  4. Enter the digits.

    The value is 3.44, so a = 3, b = 4 and c = 4.

    record 3 4 4

Answer: 3.44 V. Record 3 4 4.

Multiple choice · outcome 30-B2.3k
A power source drives 2Ag + Ni²⁺ → 2Ag⁺ + Ni in an electrolytic cell. Table values: E°(Ag⁺/Ag) = +0.80 V and E°(Ni²⁺/Ni) = −0.26 V. Which voltage must the source exceed?
  1. A. 1.06 V
  2. B. −1.06 V
  3. C. 0.54 V
  4. D. 2.12 V
Show the worked solution (try the question first)
  1. Name the roles.

    Ni²⁺ is reduced at the cathode. Ag is oxidized at the anode.

    cathode: Ni²⁺/Ni anode: Ag⁺/Ag

  2. Subtract.

    Cathode minus anode, each as printed.

    E°reaction = −0.26 − (+0.80) = −1.06 V

  3. Drop the sign.

    The source must supply a positive voltage greater than the size of this value.

    more than 1.06 V

Why each choice is right or wrong

  • A. Correct. E°reaction = −1.06 V, so the source must supply more than 1.06 V.
  • B. A voltage that a source supplies is a positive number. The negative sign belongs to E°reaction, not to the applied voltage.
  • C. This changes the sign of the nickel value before subtracting. The table value is used as printed.
  • D. This doubles the answer because of the 2 in 2Ag. E° does not change when the coefficients change.

Answer: A

Multiple choice · outcome 30-B2.1s
A steel spoon and a silver bar are placed in AgNO₃(aq) and joined to a power source to plate the spoon with silver. Only silver and its ions react. Which statement is correct?
  1. A. The spoon is the anode and loses mass.
  2. B. The spoon is the cathode and gains mass.
  3. C. The silver bar is the cathode and gains mass.
  4. D. The spoon is joined to the positive terminal and gains mass.
Show the worked solution (try the question first)
  1. Choose the cathode.

    Metal ions must be reduced onto the spoon, so the spoon is the cathode.

    spoon = cathode: Ag⁺ + e⁻ → Ag

  2. Choose the anode.

    The silver bar is oxidized and dissolves.

    bar = anode: Ag → Ag⁺ + e⁻

  3. Match the mass changes.

    The cathode gains mass and the anode loses mass.

    answer B

Why each choice is right or wrong

  • A. Oxidation happens at the anode. Plating needs silver ions to be reduced onto the spoon, so the spoon is the cathode.
  • B. Correct. Ag⁺ + e⁻ → Ag happens at the spoon. The spoon is the cathode and gains mass.
  • C. The silver bar is the anode. Ag → Ag⁺ + e⁻ happens there, and the bar loses mass.
  • D. The spoon gains mass, but a cathode is joined to the negative terminal. The positive terminal is joined to the anode.

Answer: B

Multiple choice · outcome 30-B2.1k
Molten calcium chloride, CaCl₂(l), is electrolyzed with inert electrodes. Which statement about ion movement and electron flow is correct?
  1. A. Electrons move through the liquid from the cathode to the anode.
  2. B. Ca²⁺ moves to the cathode, Cl⁻ moves to the anode, and electrons move only in the wires.
  3. C. Ca²⁺ moves to the anode and is oxidized.
  4. D. Cl⁻ moves to the cathode and is reduced.
Show the worked solution (try the question first)
  1. Choose the cathode.

    The negative electrode is the cathode. Cations move to it.

    Ca²⁺ → cathode

  2. Choose the anode.

    The positive electrode is the anode. Anions move to it.

    Cl⁻ → anode

  3. Place the electrons.

    Electrons travel only in the wires. The ions carry charge through the liquid.

    answer B

Why each choice is right or wrong

  • A. Electrons do not cross the liquid. They move only in the wires. The ions carry the charge in the liquid.
  • B. Correct. Cations go to the cathode and anions go to the anode. Electrons stay in the wires.
  • C. Ca²⁺ is a cation. It is attracted to the negative cathode, where it is reduced, not oxidized.
  • D. Cl⁻ is an anion. It is attracted to the positive anode, where it is oxidized, not reduced.

Answer: B