B8 · Electrolytic cells · Notes

Download the printable PDF

Goals: Explain how an electrolytic cell uses electrical energy to drive a reaction that is not spontaneous. Identify the anode, cathode, polarity and ion movement, and write half-reactions for molten salts and plating. Compare voltaic and electrolytic cells.

Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.

Slide 1 of 8 · Driving a reaction that will not go by itself

Key ideas

E°reaction = E°cathode − E°anode. A value means the reaction goes by itself. A value means it does not.

A power source can force a reaction that is not spontaneous. A cell that uses electrical energy to do this is an cell.

A voltaic cell does the opposite. It turns a spontaneous reaction into energy.

If E°reaction = −1.10 V, the source must supply more than V. Give a minimum voltage as a number.

Example

Given Cu + Zn²⁺ → Cu²⁺ + Zn, with E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. Find E°reaction. Does the reaction go by itself? What minimum voltage must a power source exceed to force it?

Try it

Given Cu + Mg²⁺ → Cu²⁺ + Mg, with E°(Mg²⁺/Mg) = −2.37 V and E°(Cu²⁺/Cu) = +0.34 V. Find E°reaction. Does the reaction go by itself? What minimum voltage must a power source exceed to force it?

Slide 2 of 8 · Anode, cathode and the power source

Key ideas

Oxidation happens at the and reduction happens at the , in every cell, voltaic or electrolytic.

In an electrolytic cell, the power source sets the signs. The negative terminal pushes electrons to the , so the cathode is .

The electrode joined to the positive terminal hands electrons back to the source. That is oxidation, so it is the and it is .

Cations move toward the and anions move toward the . Electrons travel only in the , and ions carry the charge in the liquid.

Example

A power source is joined by wires to two electrodes in a liquid that has ions. Which electrode is the cathode and which is the anode? Which way do cations and anions move, and where do the electrons travel?

Try it

Two inert electrodes dip in molten KBr. Electrode X is joined to the negative terminal of a power source. Name electrode X, name the process at X, and say whether K⁺ moves toward or away from X.

Slide 3 of 8 · A molten salt cell

Key ideas

Molten NaCl has only ions and no water, so each electrode has only one ion that can react.

Na⁺ moves to the negative cathode: Na⁺ + e⁻ → . Cl⁻ moves to the positive anode: 2Cl⁻ → + 2e⁻.

The anode loses electrons and the cathode half gains 1, so double the cathode half. Cell reaction: 2Na⁺ + 2Cl⁻ → .

E°reaction = −2.71 − (+1.36) = V. E° is never multiplied by . The source must supply more than 4.07 V.

Example

Molten sodium chloride, NaCl(l), has two inert electrodes joined to a power source. Given E°(Na⁺/Na) = −2.71 V and E°(Cl₂/Cl⁻) = +1.36 V. Write both half-reactions and the cell reaction, name the product at each electrode, and find E°reaction.

Try it

Molten potassium bromide, KBr(l), has two inert electrodes joined to a power source. Given E°(K⁺/K) = −2.93 V and E°(Br₂/Br⁻) = +1.07 V. Write the cell reaction, name the product at each electrode, and find E°reaction.

Slide 4 of 8 · Method: how to describe an electrolytic cell

Key ideas

Step 1. List the present. A molten salt has no water.

Step 2. Send to the cathode. Reduction happens at the cathode.

Step 3. Send to the anode. Oxidation happens at the anode.

Step 4. Write the halves and the overall equation. Match the first.

Step 5. Find E°reaction = E°cathode − E°anode. The source must be than its size, and the cathode joins the terminal.

Example

Use the method on molten NaCl with inert electrodes and a power source. What forms at each electrode?

Try it

Use the method on molten MgCl₂ with inert electrodes. E°(Mg²⁺/Mg) = −2.37 V and E°(Cl₂/Cl⁻) = +1.36 V. What forms, and what is the minimum voltage?

Slide 5 of 8 · Voltaic and electrolytic cells side by side

Key ideas

The same two half-cells can run either way. In the voltaic Zn / Cu cell, the reaction is spontaneous and E°reaction = V.

In the electrolytic cell, a power source forces the reverse reaction, Cu + Zn²⁺ → Cu²⁺ + Zn. Then E°reaction = V.

Energy changes from chemical to in a voltaic cell, and from electrical to in an electrolytic cell.

In both cells, oxidation happens at the . The anode is negative in a cell and positive in an electrolytic cell. In a drawing, a voltmeter means voltaic and a power source means electrolytic.

Example

The Zn²⁺/Zn (−0.76 V) and Cu²⁺/Cu (+0.34 V) half-cells run first as a voltaic cell and then as an electrolytic cell. For each, write the overall reaction and E°reaction, and give the sign of the anode.

Try it

A cell runs a reaction with E°reaction = −0.46 V. Is it a voltaic or an electrolytic cell? Give the energy change, say whether the reaction is spontaneous, and give the sign of the anode.

Slide 6 of 8 · Your turn: molten zinc bromide

Key ideas

Write the ion movement first. Molten ZnBr₂ has Zn²⁺ and Br⁻ ions. Positive ions go to the negative electrode, the . Br⁻ goes to the .

Cathode: Zn²⁺ + e⁻ → Zn. Anode: → Br₂ + 2e⁻.

Both halves move 2 electrons, so they cancel when added. Cell reaction: Zn²⁺ + 2Br⁻ → .

E°reaction = −0.76 − 1.07 = V. Swapping the electrodes would wrongly give V, as if the cell ran by itself.

Example

Molten zinc bromide, ZnBr₂(l), has two inert electrodes joined to a power source. Given E°(Zn²⁺/Zn) = −0.76 V and E°(Br₂/Br⁻) = +1.07 V. Decide the product at each electrode, write the cell reaction and find the minimum voltage.

Try it

Molten copper(II) bromide, CuBr₂(l), has two inert electrodes joined to a power source. Given E°(Cu²⁺/Cu) = +0.34 V and E°(Br₂/Br⁻) = +1.07 V. Decide the product at each electrode, write the cell reaction and find the minimum voltage.

Slide 7 of 8 · Electroplating and refining

Key ideas

To plate an object, make it the . It is joined to the terminal, metal ions gain electrons there, and the object gains mass.

In silver plating, the cathode half-reaction is Ag⁺ + e⁻ → . A silver bar as the anode dissolves: Ag → + e⁻, so the Ag⁺ concentration stays nearly constant.

In copper refining, impure copper is the and a sheet of pure copper is the . Cu is oxidized at one and Cu²⁺ is reduced at the other.

Impurities with a more E° than Cu²⁺/Cu, such as silver and gold, stay solid. Impurities with a more negative E°, such as zinc, .

Example

A steel spoon and a bar of silver are placed in silver nitrate solution, AgNO₃(aq), and joined to a power source. How can a thin layer of silver be placed on the spoon? Name the cathode and anode, write both half-reactions and state each mass change.

Try it

A metal key is to be plated with nickel. The cell has a nickel bar and nickel(II) sulfate solution, NiSO₄(aq), joined to a power source. Name the cathode, write both half-reactions and state each mass change.

Slide 8 of 8 · The same method with two silver electrodes

Key ideas

The same rule works for any metal. At the cathode, Ag⁺ + e⁻ → , so the cathode gains mass. At the anode, Ag → + e⁻, so the anode loses mass.

Silver moves from one electrode to the other, so the Ag⁺ concentration stays about the .

Both electrodes use the same half-cell, so E°reaction = +0.80 − (+0.80) = V.

Real cells need a voltage above 0.00 V to beat resistance. That is why plating and refining use little energy.

Example

Two silver electrodes dip in AgNO₃(aq). Electrode 1 is joined to the negative terminal of a power source and electrode 2 to the positive terminal. Given E°(Ag⁺/Ag) = +0.80 V. Name each electrode, give its half-reaction and mass change, and find E°reaction.

Try it

Two copper electrodes dip in CuSO₄(aq) and are joined to a power source. Given E°(Cu²⁺/Cu) = +0.34 V. Write the half-reaction at the cathode and at the anode, and find E°reaction.

Practice 1

Given the Data Booklet table values Mg²⁺/Mg at −2.37 V and Zn²⁺/Zn at −0.76 V. A student wants to drive Zn²⁺ + Mg → Zn + Mg²⁺ backwards in an electrolytic cell, so Mg²⁺ + Zn → Mg + Zn²⁺. Find E°reaction for the reaction in the cell and the smallest voltage that must be exceeded.

Practice 2

In an electrolytic cell with inert electrodes, which electrode is joined to the positive terminal of the power source? Name the process that happens there and the direction in which anions move.

Practice 3

Write the half-reactions and the cell reaction for molten NaCl and name the product at each electrode.

Practice 4

Given molten ZnBr₂(l) with inert electrodes (Data Booklet table values: E°(Zn²⁺/Zn) = −0.76 V; E°(Br₂/Br⁻) = +1.07 V). Write the half-reaction at each electrode and calculate E°reaction.

Practice 5

A copper bar and a metal key are placed in copper(II) sulfate solution to plate the key with copper. Say which one is the cathode, write its half-reaction and predict the mass change of each.

Practice 6

Compare a voltaic cell and an electrolytic cell for the Zn / Cu pair. Give the sign of E°reaction, the energy change and the sign of the anode in each.

Practice 7

Challenge: Given molten CaCl₂(l) with inert electrodes (Data Booklet table values: E°(Ca²⁺/Ca) = −2.87 V; E°(Cl₂/Cl⁻) = +1.36 V). Write the half-reaction at each electrode, name each product, and find E°reaction in volts. Then state the least voltage the power source must supply.