B7 · Worked examples
E° (say “E naught”) is a standard reduction potential, a voltage in volts (V) for one half-cell. “Standard” means 1.0 mol/L, 25.00 °C and 101.325 kPa. A half-cell holds one pair of species, such as Zn²⁺ and Zn. An ion’s charge is written number then sign, as in Zn²⁺. The anode is where oxidation happens. The cathode is where reduction happens. E°cell is the voltage of a whole cell: E°cathode − E°anode. The symbol e⁻ means an electron. The Data Booklet electrode table is printed on p. 7.
Open the B7 lesson · B7 slide notes
Worked question types
Each example shows every step, why you do it, and the idea behind it.
Question typeFind a table value when electrons flow toward the hydrogen half-cell
Use this when: The question gives a meter reading for a half-cell joined to the hydrogen reference and says the electrons flow from the unknown half-cell toward hydrogen.
Example. A cadmium half-cell is joined to the standard hydrogen half-cell. The voltmeter reads 0.40 V. Electrons flow in the wire from the cadmium electrode toward the hydrogen half-cell. The hydrogen half-cell is set to 0.00 V. Find E°(Cd²⁺/Cd).
- Name the anode and the cathode from the electron flow.
Electrons leave the anode and travel to the cathode. The electrons leave cadmium, so cadmium is the anode.
anode: Cd cathode: hydrogen
- Write the meter reading as E°cell.
The reading is the size of the push, and the cell is running, so E°cell is a positive number.
E°cell = +0.40 V
- Put the numbers into E°cell = E°cathode − E°anode.
The hydrogen half-cell is the cathode, so its value is 0.00 V. The cadmium value is the unknown.
0.40 = 0.00 − E°(Cd²⁺/Cd)
- Solve for the unknown.
Move E°(Cd²⁺/Cd) to the left side and 0.40 to the right side.
E°(Cd²⁺/Cd) = 0.00 − 0.40 = −0.40 V
- Say what the sign means.
A negative value means Cd²⁺ is poorer than H⁺ at gaining electrons.
negative: below hydrogen in the table
- Check by putting the answer back.
Subtract the cadmium value from the hydrogen value. You should get the meter reading.
0.00 − (−0.40) = +0.40 V ✓
Why this works. Nobody can measure one half-cell alone, because a voltmeter reads the push between two half-cells. So 0.00 V is assigned to the hydrogen half-cell, like sea level for heights. Every other value is the push measured against it.
Check your answer. The Data Booklet lists E°(Cd²⁺/Cd) = −0.40 V. The electron flow, not memory, gave the sign.
Common mistake. Writing +0.40 V because the meter shows a positive number. The meter reading is E°cell. The sign of the unknown comes from which half is the anode.
Answer: E°(Cd²⁺/Cd) = −0.40 V
Question typeFind a table value when electrons flow away from the hydrogen half-cell
Use this when: The question gives a meter reading for a half-cell joined to the hydrogen reference and says the electrons flow toward the unknown half-cell.
Example. A mercury half-cell is joined to the standard hydrogen half-cell. The voltmeter reads 0.85 V. Electrons flow in the wire toward the mercury electrode. The hydrogen half-cell is set to 0.00 V. Find E°(Hg²⁺/Hg).
- Name the anode and the cathode from the electron flow.
Electrons travel to the cathode. They flow toward mercury, so mercury is the cathode and hydrogen is the anode.
cathode: Hg anode: hydrogen
- Write the meter reading as E°cell.
The reading is the size of the push for the running cell.
E°cell = +0.85 V
- Put the numbers into E°cell = E°cathode − E°anode.
The hydrogen half-cell is the anode, so 0.00 V is subtracted. The mercury value is the unknown.
0.85 = E°(Hg²⁺/Hg) − 0.00
- Solve for the unknown.
Add 0.00 to both sides.
E°(Hg²⁺/Hg) = 0.85 + 0.00 = +0.85 V
- Say what the sign means.
A positive value means Hg²⁺ is better than H⁺ at gaining electrons.
positive: above hydrogen in the table
- Compare with the cadmium case.
The numbers are different, but the method is the same. Only the electron flow decided which half is the anode.
flow decides the sign
Why this works. The same rule gives a negative value when hydrogen is the cathode and a positive value when hydrogen is the anode. The sign shows how strongly the half-cell pulls on electrons compared with hydrogen.
Check your answer. The Data Booklet lists E°(Hg²⁺/Hg) = +0.85 V. A positive value matches electrons flowing toward mercury.
Common mistake. Deciding the sign from memory of a similar question. Always read the electron flow first.
Answer: E°(Hg²⁺/Hg) = +0.85 V
Question typeRead the table to rank oxidizing and reducing agents
Use this when: The question lists several rows of the table and asks for the strongest or weakest oxidizing agent or reducing agent, or for a full ranking.
Example. Use these table values: E°(Au³⁺/Au) = +1.50 V, E°(Hg²⁺/Hg) = +0.85 V, E°(Pb²⁺/Pb) = −0.13 V and E°(Al³⁺/Al) = −1.66 V. Name the strongest oxidizing agent and the strongest reducing agent. Rank all four ions as oxidizing agents.
- Remember how every row is written.
Each row is a reduction, with the electrons on the left. Each ion on the left gains electrons. Each metal on the right can give them.
left side: ion (oxidizing agent) right side: metal (reducing agent)
- Find the strongest oxidizing agent.
It is on the left side of the row with the highest value. A higher value means a stronger pull on electrons.
highest: +1.50 V, so Au³⁺
- Find the strongest reducing agent.
It is on the right side of the row with the lowest value. The lowest value means the metal lets go of electrons most easily.
lowest: −1.66 V, so Al
- Rank the ions from highest value to lowest.
A negative number is lower than any positive number. −0.13 is higher than −1.66.
Au³⁺ (+1.50) > Hg²⁺ (+0.85) > Pb²⁺ (−0.13) > Al³⁺ (−1.66)
- Rank the metals the other way round.
The best oxidizing agent has the poorest reducing partner. So the metal order is the mirror image.
Al > Pb > Hg > Au as reducing agents
- Check one pair.
Au³⁺ is the strongest oxidizing agent and Au is the weakest reducing agent. They sit in the same row.
Au: weakest reducing agent ✓
Why this works. A high value means the species on the left strongly attracts electrons. A low value means the species on the right gives electrons easily. The two sides of one row always rank in opposite directions.
Check your answer. Au³⁺ is first in the oxidizing list and Au is last in the reducing list. The lists are mirror images.
Common mistake. Reading the largest size of the number instead of the largest value. −1.66 V has a large size, but it is the lowest value.
Answer: Strongest oxidizing agent: Au³⁺. Strongest reducing agent: Al. Oxidizing agents: Au³⁺ > Hg²⁺ > Pb²⁺ > Al³⁺. Reducing agents: Al > Pb > Hg > Au
Question typeUse the anode’s table value as printed, with no sign change
Use this when: The question gives a cell, often with a student’s working that changed the sign of the anode value before subtracting.
Example. A cell has a silver cathode and a nickel anode. Table values: E°(Ag⁺/Ag) = +0.80 V and E°(Ni²⁺/Ni) = −0.26 V. A student writes E°cell = +0.80 − (+0.26) = +0.54 V. Find the correct E°cell. Explain the error.
- Name the roles.
Ag⁺ is reduced at the cathode. Ni is oxidized at the anode.
cathode: Ag⁺/Ag anode: Ni²⁺/Ni
- Find the student’s error.
The anode value is −0.26 V in the table. The student wrote +0.26 V. That flips the sign before subtracting.
student used +0.26 for the anode
- Use the table value exactly as printed.
Every table value is a reduction value. Even for the species that is oxidized, keep the printed sign.
anode value: −0.26
- Subtract.
The subtraction in E°cell = E°cathode − E°anode already handles the reversal. Flipping the sign first counts the reversal twice.
E°cell = +0.80 − (−0.26) = +1.06 V
- Write the cell reaction.
Each Ni gives 2 electrons and each Ag⁺ takes 1. Double the silver half.
2Ag⁺ + Ni → 2Ag + Ni²⁺
- Compare the two answers.
The correct value is larger than the student’s value by 2 × 0.26 V.
+1.06 V − +0.54 V = +0.52 V
Why this works. The table already stores each value as a reduction. Subtracting the anode value turns the anode half into an oxidation. Changing its sign as well undoes that work.
Check your answer. Silver is a much stronger oxidizing agent than Ni²⁺, so a large positive value of +1.06 V is sensible.
Common mistake. Flipping the anode’s sign and then subtracting. This is one of the most common wrong choices on the diploma.
Answer: E°cell = +1.06 V. Cell reaction: 2Ag⁺ + Ni → 2Ag + Ni²⁺. The student changed the sign of the anode value
Question typeBuild a cell from any two rows, with unequal electrons and a mole ratio
Use this when: The question gives two reduction rows, asks for the cell reaction and E°cell, and may ask how many moles of one species react with a given amount of the other.
Example. Table values: E°(Ni²⁺/Ni) = −0.26 V and E°(Al³⁺/Al) = −1.66 V. Build the cell that uses Ni²⁺ and Al. Write the cell reaction and find E°cell. How many moles of Ni²⁺ react with 4.0 mol of Al?
- Write the two values side by side.
Use Method: how to find E°cell from any two half-cells. The half with the higher value is the cathode. A negative number closer to zero is higher.
Ni²⁺/Ni: −0.26 V Al³⁺/Al: −1.66 V
- Choose the cathode.
−0.26 is higher than −1.66, so Ni²⁺ is reduced. Al is oxidized and runs backwards.
cathode: Ni²⁺/Ni anode: Al³⁺/Al
- Write the two half-reactions.
The reduction has the electrons on the left. The oxidation has them on the right.
Ni²⁺ + 2e⁻ → Ni Al → Al³⁺ + 3e⁻
- Match the electrons.
The nickel half has 2e⁻ and the aluminium half has 3e⁻. The smallest number both go into is 6.
2 and 3 → 6
- Multiply each half.
Multiply every term of the nickel half by 3 and every term of the aluminium half by 2.
nickel × 3: 3Ni²⁺ + 6e⁻ → 3Ni | aluminium × 2: 2Al → 2Al³⁺ + 6e⁻
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
3Ni²⁺ + 6e⁻ + 2Al → 3Ni + 2Al³⁺ + 6e⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: e⁻ → 3Ni²⁺ + 2Al → 3Ni + 2Al³⁺
- Check atoms and charge.
Both must match on the two sides.
charge: +6 = +6 ✓ atoms: Ni 3, Al 2 ✓
- Subtract.
Use the printed values. Do not multiply them by the 3 and the 2.
E°cell = −0.26 − (−1.66) = +1.40 V
- Use the mole ratio from the equation.
The coefficients say 3 mol of Ni²⁺ react with 2 mol of Al.
4.0 mol Al × (3 mol Ni²⁺ ÷ 2 mol Al) = 6.0 mol Ni²⁺
Why this works. Electrons given must equal electrons taken. The common number of electrons is 6, so Al is used 2 times and Ni²⁺ 3 times. That fixes the mole ratio. The voltage stays the same because it is energy per coulomb.
Check your answer. Second route: 4.0 mol of Al gives 12.0 mol of electrons. Each Ni²⁺ takes 2 electrons, so 12.0 ÷ 2 = 6.0 mol.
Common mistake. Guessing the mole ratio from the half-reaction coefficients. First match the electrons, then read the ratio from the final equation.
Answer: 3Ni²⁺ + 2Al → 3Ni + 2Al³⁺. E°cell = +1.40 V. 4.0 mol of Al needs 6.0 mol of Ni²⁺
Question typeUse inert electrodes and write the cell notation
Use this when: The question names a cell in which every species is dissolved, and asks for the electrodes, the cell notation, the cell reaction and E°cell.
Example. Dichromate ions, in acid, oxidize Sn²⁺ to Sn⁴⁺. Table values: E°(Cr₂O₇²⁻/Cr³⁺) = +1.23 V and E°(Sn⁴⁺/Sn²⁺) = +0.15 V. Every species is dissolved. Write the cell notation, the cell reaction and E°cell.
- Choose the cathode and the anode.
The higher value is the cathode.
+1.23 > +0.15: Cr₂O₇²⁻ is reduced at the cathode. Sn²⁺ is oxidized at the anode
- Choose the electrodes.
Neither half has a solid metal. An inert electrode does not react. It only carries electrons. Carbon, written C(s), is the choice.
both halves use C(s)
- Write the notation, anode on the left.
A comma separates species in one solution. A single line | marks a boundary between an electrode and its solution. The double line || marks the salt bridge or porous barrier. H⁺ is included because the dichromate half needs it.
C(s) | Sn²⁺(aq), Sn⁴⁺(aq) || Cr₂O₇²⁻(aq), H⁺(aq), Cr³⁺(aq) | C(s)
- Write the half-reactions.
The dichromate half is built in acid with H⁺ and H₂O. Tin(II) just loses electrons.
Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O Sn²⁺ → Sn⁴⁺ + 2e⁻
- Match the electrons.
The dichromate half has 6e⁻ and the tin(II) half has 2e⁻. The smallest number both go into is 6.
6 and 2 → 6
- Multiply each half.
Multiply every term of the dichromate half by 1 and every term of the tin(II) half by 3.
dichromate × 1: Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O | tin(II) × 3: 3Sn²⁺ → 3Sn⁴⁺ + 6e⁻
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
Cr₂O₇²⁻ + 14H⁺ + 6e⁻ + 3Sn²⁺ → 2Cr³⁺ + 7H₂O + 3Sn⁴⁺ + 6e⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: e⁻ → Cr₂O₇²⁻ + 14H⁺ + 3Sn²⁺ → 2Cr³⁺ + 7H₂O + 3Sn⁴⁺
- Check atoms and charge.
Both must match on the two sides.
charge: +18 = +18 ✓ atoms: Cr 2, O 7, H 14, Sn 3 ✓
- Subtract.
Use the printed values.
E°cell = +1.23 − (+0.15) = +1.08 V
Why this works. If a half-cell has no solid metal, a carbon electrode carries electrons to and from the dissolved ions. The notation is always written anode first, then the barrier, then the cathode.
Check your answer. Atoms and charge match: the charge is +18 on each side. E°cell is positive, so the cell runs as written.
Common mistake. Using a metal such as Sn(s) or Cr(s) as the electrode. Those metals are not in the cell, and a metal that could react would become part of the reaction.
Answer: C(s) | Sn²⁺(aq), Sn⁴⁺(aq) || Cr₂O₇²⁻(aq), H⁺(aq), Cr³⁺(aq) | C(s). Cr₂O₇²⁻ + 14H⁺ + 3Sn²⁺ → 2Cr³⁺ + 7H₂O + 3Sn⁴⁺. E°cell = +1.08 V
Question typePredict whether one species oxidizes another
Use this when: The question names an oxidizing agent and a species to be oxidized, gives two rows, and asks if it happens under standard conditions.
Example. Table values: E°(Sn⁴⁺/Sn²⁺) = +0.15 V and E°(Fe³⁺/Fe²⁺) = +0.77 V. Will Sn⁴⁺ oxidize Fe²⁺ to Fe³⁺ under standard conditions? Write the reaction asked about and find E°cell. If it is not spontaneous, write the reaction that is.
- Decide the cathode from the question.
Sn⁴⁺ is the oxidizing agent, so it is reduced. Here the question names the direction, so we do not pick the cathode by the higher value.
cathode: Sn⁴⁺/Sn²⁺ anode: Fe³⁺/Fe²⁺
- Write the two half-reactions.
Reduction has the electrons on the left. Oxidation has them on the right.
Sn⁴⁺ + 2e⁻ → Sn²⁺ Fe²⁺ → Fe³⁺ + e⁻
- Match the electrons.
The tin half has 2e⁻ and the iron half has 1e⁻. The smallest number both go into is 2.
2 and 1 → 2
- Multiply each half.
Multiply every term of the tin half by 1 and every term of the iron half by 2.
tin × 1: Sn⁴⁺ + 2e⁻ → Sn²⁺ | iron × 2: 2Fe²⁺ → 2Fe³⁺ + 2e⁻
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
Sn⁴⁺ + 2e⁻ + 2Fe²⁺ → Sn²⁺ + 2Fe³⁺ + 2e⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: e⁻ → Sn⁴⁺ + 2Fe²⁺ → Sn²⁺ + 2Fe³⁺
- Check atoms and charge.
Both must match on the two sides.
charge: +8 = +8 ✓ atoms: Sn 1, Fe 2 ✓
- Subtract.
Cathode value minus anode value, with each as printed.
E°cell = +0.15 − (+0.77) = −0.62 V
- Read the sign.
A negative value means this direction is not spontaneous under standard conditions. The reverse direction is spontaneous.
not spontaneous as written
- Write the spontaneous reaction.
Swap the sides of the equation. Reversing a reaction changes only the sign of E°cell.
2Fe³⁺ + Sn²⁺ → 2Fe²⁺ + Sn⁴⁺, E°cell = +0.62 V
- Say what the sign leaves out.
The sign gives direction under standard conditions. It says nothing about speed.
direction only
Why this works. The sign of E°cell is a test of direction. The same two half-cells give a positive value one way and the same size with the opposite sign the other way.
Check your answer. The two values are −0.62 V and +0.62 V. They have the same size and opposite signs.
Common mistake. Choosing the cathode by the higher value when the question names the reaction. Then the answer always comes out positive, even for a reaction that is not spontaneous.
Answer: Not spontaneous. Sn⁴⁺ + 2Fe²⁺ → Sn²⁺ + 2Fe³⁺, E°cell = −0.62 V. Spontaneous: 2Fe³⁺ + Sn²⁺ → 2Fe²⁺ + Sn⁴⁺, E°cell = +0.62 V
Question typePredict what you would see in a running cell
Use this when: The question names a cell with inert electrodes and asks for colour, pH and electrode mass changes, with half-reactions as support.
Example. The cell C(s) | Sn²⁺(aq), Sn⁴⁺(aq) || Cr₂O₇²⁻(aq), H⁺(aq), Cr³⁺(aq) | C(s) is running. The Data Booklet colour table (printed p. 11) lists dichromate as orange and chromium(III) as blue-green at 1.0 mol/L. It lists no colour for tin ions. Predict the colour change and the pH change near the cathode. Predict the mass change of each electrode.
- Write the cathode half-reaction.
The cathode is where reduction happens. Dichromate is reduced.
Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O
- Predict the colour.
Orange Cr₂O₇²⁻ is used up and blue-green Cr³⁺ appears. The solution near the cathode changes from orange toward blue-green.
orange → blue-green
- Predict the pH.
The half-reaction has 14H⁺ on the left, so H⁺ is used up. Less H⁺ means a higher pH.
pH rises near the cathode
- Look at the anode.
Sn²⁺ is oxidized to Sn⁴⁺. The booklet gives no colour for tin ions, so make no colour prediction there.
Sn²⁺ → Sn⁴⁺ + 2e⁻: no colour claim
- Predict the electrode masses.
Mass changes only if a solid is made or used up. Both carbon electrodes only carry electrons.
both carbon electrodes keep their mass
- Separate what you see from what you infer.
The colour change and the mass are observations to expect. The identity of the products is an inference from the half-reaction.
observe: colour infer: Cr³⁺ formed
Why this works. Every prediction comes from reading a half-reaction: what is used up and what is made. A carbon electrode is not in any half-reaction, so its mass does not change. A reacting metal electrode would gain or lose mass.
Check your answer. Check each prediction against the half-reaction, not against the type of cell.
Common mistake. Predicting a mass change for a carbon electrode just because the cell is running. Only a solid that forms or dissolves changes mass.
Answer: Near the cathode, orange → blue-green and the pH rises. Both carbon electrodes keep their mass. No colour is predicted for tin
Question typeSay what E°cell does and does not tell you
Use this when: The question gives a calculated E°cell and a claim about speed, or about voltage at another concentration, and asks which parts are supported.
Example. Table values: E°(Ag⁺/Ag) = +0.80 V and E°(Cu²⁺/Cu) = +0.34 V. For Cu + 2Ag⁺ → Cu²⁺ + 2Ag, a student claims the reaction is spontaneous, that it is fast, and that the cell gives 0.46 V at 0.010 mol/L. Which parts of the claim are supported?
- Calculate E°cell.
Ag⁺ is reduced at the cathode. Cu is oxidized at the anode.
E°cell = +0.80 − (+0.34) = +0.46 V
- Test the claim “spontaneous”.
A positive value means the reaction runs as written under standard conditions. This part is supported.
supported
- Test the claim “fast”.
E°cell gives direction only. A spontaneous reaction can be very slow.
not supported
- Test the claim “0.46 V at 0.010 mol/L”.
The table values are for 1.0 mol/L solutions. They do not give voltages at other concentrations.
not supported
- Write the limits.
Use E°cell as a first prediction. Claim no more than the standard conditions allow.
direction at standard conditions only
Why this works. E°cell is measured at 1.0 mol/L, 25.00 °C and 101.325 kPa. It tells you which direction is spontaneous under those conditions. It does not tell you how fast, or what the voltage is under other conditions.
Check your answer. Only one of the three parts of the claim can be traced to the number +0.46 V.
Common mistake. Thinking a large positive E°cell means a fast reaction. Speed depends on other factors.
Answer: E°cell = +0.46 V. Spontaneous: supported. Fast: not supported. 0.46 V at 0.010 mol/L: not supported
Diploma-style questions
Try each question first. Then open the worked solution.
Numerical response · outcome 30-B2.4kTable values: E°(Cl₂/Cl⁻) = +1.36 V and E°(Co²⁺/Co) = −0.28 V. Find E°cell for Cl₂ + Co → 2Cl⁻ + Co²⁺. Record your answer as a.bc V. Enter the digits a, b and c.
Show the worked solution (try the question first)
- Name the roles.
Cl₂ gains electrons, so it is reduced at the cathode. Co loses electrons, so it is oxidized at the anode.
cathode: Cl₂/Cl⁻ anode: Co²⁺/Co
- Subtract.
Use each table value as printed. Do not multiply by the coefficient 2.
E°cell = +1.36 − (−0.28) = +1.64 V
- Enter the digits.
The value is 1.64, so a = 1, b = 6 and c = 4.
record 1 6 4
Answer: E°cell = +1.64 V. Record 1 6 4.
Multiple choice · outcome 30-B2.3kA lead half-cell is joined to the standard hydrogen half-cell, which is set to 0.00 V. The voltmeter reads 0.13 V. Electrons flow in the wire from the lead electrode toward the hydrogen half-cell. What is E°(Pb²⁺/Pb)?
- A. +0.13 V
- B. −0.13 V
- C. −0.26 V
- D. 0.00 V
Show the worked solution (try the question first)
- Name the roles from the electron flow.
Electrons leave the anode. They leave lead, so lead is the anode and hydrogen is the cathode.
anode: Pb cathode: hydrogen
- Use E°cell = E°cathode − E°anode.
The meter reading is E°cell.
0.13 = 0.00 − E°(Pb²⁺/Pb)
- Solve.
Rearrange.
E°(Pb²⁺/Pb) = −0.13 V
Why each choice is right or wrong
- A. This takes the meter reading as the value. Electrons leave lead, so lead is the anode and the value must be negative.
- B. Correct. 0.13 = 0.00 − E°(Pb²⁺/Pb), so E°(Pb²⁺/Pb) = −0.13 V.
- C. This doubles the value because lead has a 2+ charge. A potential is energy per coulomb, so it is not multiplied by the charge.
- D. This is the assigned value of the hydrogen half-cell. The lead half-cell has its own value.
Answer: B
Multiple choice · outcome 30-B2.5kFe³⁺ oxidizes Sn²⁺ to Sn⁴⁺. Table values: E°(Fe³⁺/Fe²⁺) = +0.77 V and E°(Sn⁴⁺/Sn²⁺) = +0.15 V. Every species is dissolved, and the electrodes are inert. Which cell notation is correct?
- A. C(s) | Fe²⁺(aq), Fe³⁺(aq) || Sn⁴⁺(aq), Sn²⁺(aq) | C(s)
- B. Fe(s) | Fe²⁺(aq) || Sn⁴⁺(aq) | Sn(s)
- C. C(s) | Sn²⁺(aq), Sn⁴⁺(aq) || Fe³⁺(aq), Fe²⁺(aq) | C(s)
- D. C(s) | Sn²⁺(aq) | Sn⁴⁺(aq) || Fe³⁺(aq) | Fe²⁺(aq) | C(s)
Show the worked solution (try the question first)
- Choose the roles.
Fe³⁺ is reduced, so it is the cathode. Sn²⁺ is oxidized, so it is the anode.
E°cell = +0.77 − (+0.15) = +0.62 V
- Place the anode on the left.
The tin half goes on the left and the iron half on the right.
tin half || iron half
- Choose the electrodes.
Dissolved ions need carbon electrodes, written C(s).
C(s) on both ends
- Group each solution.
A comma joins the two species that share one solution.
Sn²⁺(aq), Sn⁴⁺(aq) and Fe³⁺(aq), Fe²⁺(aq)
Why each choice is right or wrong
- A. The halves are swapped. The anode is on the right, so the iron half is written as if it were oxidized.
- B. The electrodes are iron and tin metal. Neither metal is in the cell, and these are not inert electrodes.
- C. Correct. The tin half is the anode on the left, the double line is in the middle, and each solution has its species separated by a comma.
- D. The species in one solution are separated by lines. A line marks an electrode boundary. A comma is used for species in the same solution.
Answer: C
Multiple choice · outcome 30-B2.6kFor 2Fe³⁺ + Sn²⁺ → 2Fe²⁺ + Sn⁴⁺, a student calculates E°cell = +0.62 V from table values. Which statement is supported by this result?
- A. The reaction runs quickly.
- B. The cell gives 0.62 V when each solution is 0.010 mol/L.
- C. The reaction is spontaneous as written under standard conditions.
- D. E°cell becomes 1.24 V because 2Fe³⁺ appears in the equation.
Show the worked solution (try the question first)
- Read what the sign says.
A positive value means the reaction runs as written under standard conditions.
direction, at 1.0 mol/L, 25.00 °C, 101.325 kPa
- Test each statement.
Speed and other concentrations are outside what the number tells you. A coefficient never changes E°cell.
A no, B no, C yes, D no
- Choose C.
Only the direction claim is supported.
answer C
Why each choice is right or wrong
- A. E°cell gives direction only. A spontaneous reaction can be very slow.
- B. The table values are for 1.0 mol/L. They do not give the voltage at 0.010 mol/L.
- C. Correct. The positive value +0.62 V means the reaction is spontaneous as written under standard conditions.
- D. E°cell is energy per coulomb. Doubling the reaction does not change it.
Answer: C