B7 · Reduction potentials and the hydrogen reference · Notes
Download the printable PDF
Goals: Explain why every potential is measured against the standard hydrogen reference. Use the table to build a cell from any two half-cells, with inert electrodes when needed. Calculate E°cell, predict observations and say what the sign does and does not tell us.
Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.
Slide 1 of 8 · One reference point for every half-cell
Key ideas
A voltmeter reads the push between half-cells, so chemists chose one half-cell as the reference and set its value to exactly V.
The standard hydrogen half-cell is 2H⁺ + 2e⁻ → H₂, with H⁺ at mol/L and H₂ gas at kPa.
Electrons flow away from the and toward the cathode. Use E°cell = E°cathode − E°anode and solve for the unknown half-cell value.
When the reference is the cathode, the unknown value is . When the reference is the anode, the unknown value is .
Example
A zinc half-cell is joined to the standard hydrogen half-cell. The voltmeter reads 0.76 V and electrons flow from the zinc half-cell toward the hydrogen half-cell. Find E°(Zn²⁺/Zn).
Try it
A copper half-cell is joined to the standard hydrogen half-cell. The voltmeter reads 0.34 V and electrons flow toward the copper half-cell. Find E°(Cu²⁺/Cu).
Slide 2 of 8 · Reading the table: all values are reductions
Key ideas
Every row in the table is written as a , with the electrons on the left side.
The strongest oxidizing agent is on the side and has the value.
The strongest reducing agent is on the side and has the value.
If something is oxidized in a cell, still use its reduction row value as . Flipping the sign and then subtracting counts the sign change .
Example
Given Ag⁺ + e⁻ → Ag (+0.80 V), Cu²⁺ + 2e⁻ → Cu (+0.34 V) and Zn²⁺ + 2e⁻ → Zn (−0.76 V). Which of these is the strongest oxidizing agent and which is the strongest reducing agent? Rank each group.
Try it
Given Br₂ + 2e⁻ → 2Br⁻ (+1.07 V), Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and I₂ + 2e⁻ → 2I⁻ (+0.54 V). Name the strongest oxidizing agent and the strongest reducing agent among all six.
Slide 3 of 8 · A cell from any two half-cells
Key ideas
Compare the two table values. The half with the value is reduced at the cathode. The other half runs as the oxidation at the anode.
The anode half 2I⁻ → I₂ + 2e⁻ gives electrons, and each Fe³⁺ takes , so multiply the iron half by 2.
The cell reaction is . Check the charge: both sides total +4.
E°cell = E°cathode − E°anode = V. E° is energy for each unit of charge, so it is multiplied when a half-reaction is.
Example
Given Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and I₂ + 2e⁻ → 2I⁻ (+0.54 V). Build the cell reaction and find E°cell.
Try it
Given Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and Cu²⁺ + 2e⁻ → Cu (+0.34 V). Build the cell reaction in which Fe³⁺ is reduced and copper is oxidized, and find E°cell.
Slide 4 of 8 · Method: how to find E°cell from any two half-cells
Key ideas
Step 1. Write the two table . Each one is E° for its pair.
Step 2. The E° is the anode, so that half is oxidized.
Step 3. The E° is the cathode, so that half is reduced.
Step 4. E°cell = E° − E°anode. Do not multiply by .
Step 5. A E°cell means the cell runs by itself.
Example
Use the method on Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and I₂ + 2e⁻ → 2I⁻ (+0.54 V). Find E°cell.
Try it
Use the method on Br₂ + 2e⁻ → 2Br⁻ (+1.07 V) and Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V). Find E°cell.
Slide 5 of 8 · Inert electrodes and notation
Key ideas
An electrode does not react. It only gives electrons a surface to enter or leave. Use one when a half-cell has no solid .
Carbon is written in cell notation. Iron metal would not work, because it could .
In cell notation, a separates ions in the same solution. The anode goes on the far left.
Each Fe²⁺ gives electron and each MnO₄⁻ takes , so multiply the iron half by 5. E°cell = 1.51 − 0.77 = V.
Example
Given MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O (+1.51 V) and Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V). Neither half-cell has a solid metal. Name the electrode, write the cell notation and the overall reaction, and find E°cell.
Try it
Given Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and Cu²⁺ + 2e⁻ → Cu (+0.34 V). Write the cell notation for the cell in which Fe³⁺ is reduced. Say which electrode is carbon, and find E°cell.
Slide 6 of 8 · Your turn: will bromine oxidize iron(II)?
Key ideas
To oxidize something, an oxidizing agent must itself be , because an oxidizing agent takes electrons.
Br₂ (+1.07 V) has a value than Fe³⁺/Fe²⁺ (+0.77 V), so Br₂ is reduced at the cathode.
The iron half gives 1 electron and bromine takes 2, so multiply the iron half by . Overall: Br₂ + 2Fe²⁺ → .
E°cell = 1.07 − 0.77 = V. A positive sign says the reaction is . It predicts direction only, not .
Example
Given Br₂ + 2e⁻ → 2Br⁻ (+1.07 V) and Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V). Does Br₂ oxidize Fe²⁺ to Fe³⁺ under standard conditions? Write the cell reaction and find E°cell.
Try it
Given I₂ + 2e⁻ → 2I⁻ (+0.54 V) and Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V). Does I₂ oxidize Fe²⁺ to Fe³⁺ under standard conditions? Write the reaction and find E°cell for it as written.
Slide 7 of 8 · Predict what you would see in a cell
Key ideas
At the cathode, purple MnO₄⁻ is reduced to Mn²⁺, which is at 0.010 mol/L (pale pink at 1.0 mol/L), so the purple fades.
MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O uses up H⁺, so the pH . Less H⁺ means a higher pH.
At the anode, Fe²⁺ → Fe³⁺ + e⁻. The Data Booklet (p. 11) lists iron(III) as , so the solution turns that colour.
Carbon electrodes are , so their mass does not change. A mass change needs a that is made or used up.
Example
The cell C(s) | Fe²⁺(aq), Fe³⁺(aq) || MnO₄⁻(aq), H⁺(aq), Mn²⁺(aq) | C(s) is running. Predict the colour change at each electrode, the pH change near the cathode and the mass change of the electrodes.
Try it
The cell Cu(s) | Cu²⁺(aq) || Fe³⁺(aq), Fe²⁺(aq) | C(s) is running. Predict the mass change of each electrode and the change in the blue colour of the copper solution.
Slide 8 of 8 · What E° tells us, and what it does not
Key ideas
In 2Ag + Cu²⁺ → 2Ag⁺ + Cu, Cu²⁺ is reduced, so Cu²⁺/Cu (+0.34 V) is the and Ag⁺/Ag (+0.80 V) is the anode.
E°cell = 0.34 − 0.80 = V. A negative value means the reaction is as written under standard conditions.
The reverse reaction, Cu + 2Ag⁺ → Cu²⁺ + 2Ag, has E°cell = V, so it is spontaneous.
E° gives the spontaneous direction under conditions. It does not give , and it does not give voltages at other concentrations.
Example
Given E°(Ag⁺/Ag) = +0.80 V and E°(Cu²⁺/Cu) = +0.34 V. A student studies 2Ag + Cu²⁺ → 2Ag⁺ + Cu. Calculate E°cell for the reaction as written. What does the sign tell you, and which reaction is spontaneous?
Try it
Given Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and Zn²⁺ + 2e⁻ → Zn (−0.76 V). A student studies Zn²⁺ + 2Fe²⁺ → Zn + 2Fe³⁺. Calculate E°cell as written. Is the reaction spontaneous, and does the sign tell us its speed?
Practice 1
A cell is built from the standard hydrogen half-cell and a nickel half-cell. The voltmeter reads 0.26 V and electrons flow from the nickel electrode toward the hydrogen half-cell. Find E° for Ni²⁺ + 2e⁻ → Ni.
Practice 2
Given these Data Booklet table rows: Ag⁺ + e⁻ → Ag (+0.80 V), Cu²⁺ + 2e⁻ → Cu (+0.34 V) and Zn²⁺ + 2e⁻ → Zn (−0.76 V). Which of these is the strongest reducing agent, and which is the strongest oxidizing agent?
Practice 3
Given these Data Booklet table rows: I₂ + 2e⁻ → 2I⁻ (+0.54 V) and Cl₂ + 2e⁻ → 2Cl⁻ (+1.36 V). Write the cell reaction for the cell in which chlorine oxidizes iodide and calculate E°cell.
Practice 4
Write the cell notation for the cell in which MnO₄⁻ (acidic) oxidizes Fe²⁺, using carbon electrodes. Name the anode and give E°cell (Data Booklet table values: MnO₄⁻/Mn²⁺ +1.51 V; Fe³⁺/Fe²⁺ +0.77 V).
Practice 5
Given these Data Booklet table rows: Cl₂ + 2e⁻ → 2Cl⁻ (+1.36 V) and Br₂ + 2e⁻ → 2Br⁻ (+1.07 V). Will Cl₂ oxidize Br⁻ to Br₂ under standard conditions? Write the equation and E°cell.
Practice 6
In the cell C(s) | Fe²⁺(aq), Fe³⁺(aq) || MnO₄⁻(aq), H⁺(aq), Mn²⁺(aq) | C(s), predict the change in pH and in colour near the cathode. Explain with a half-reaction.
Practice 7
Challenge: Given the Data Booklet table values E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. Suppose chemists had chosen the zinc half-cell as the zero reference instead of hydrogen. What would E°(Cu²⁺/Cu) be on that new scale, in volts? Would E°cell for the zinc and copper cell change? Explain.