B6 · Worked examples

These questions build and read a voltaic cell. You use the table values to find the anode and the cathode, write the half-reactions and the cell notation, predict what is seen, and find E°cell, the standard cell potential.

Open the B6 lesson · B6 slide notes

Worked question types

Each example shows every step, why you do it, and the idea behind it.

Question type

Decide the anode and the cathode, the sign of each electrode, and the electron path

Use this when: The question gives two half-cells and table values and asks which electrode is the anode, which is positive, and where the electrons go.

Example. A cell has a magnesium electrode in Mg²⁺(aq) and a nickel electrode in Ni²⁺(aq), joined by a wire and a salt bridge. Table values: E°(Mg²⁺/Mg) = −2.37 V and E°(Ni²⁺/Ni) = −0.26 V. Name the anode and the cathode. Say which is the negative electrode. Describe the path of the electrons.
  1. Compare the table values.

    Use Method: how to describe a voltaic cell. The higher value belongs to the stronger oxidizing agent. Both values are negative, so −0.26 is higher than −2.37.

    Ni²⁺/Ni (−0.26 V) is higher than Mg²⁺/Mg (−2.37 V)

  2. Decide who is reduced.

    The ion with the higher value is the oxidizing agent. It is reduced.

    Ni²⁺ is reduced

  3. Decide who is oxidized.

    The metal in the other row is the reducing agent. It is oxidized.

    Mg is oxidized

  4. Name the electrodes by their jobs.

    The anode is where oxidation happens. The cathode is where reduction happens.

    anode: Mg, Mg → Mg²⁺ + 2e⁻. cathode: Ni, Ni²⁺ + 2e⁻ → Ni

  5. Give the signs.

    The anode releases electrons, so it is the negative electrode. The cathode takes electrons, so it is the positive electrode.

    anode (Mg): −. cathode (Ni): +

  6. Describe the electron path.

    Electrons leave the anode, travel through the wire, and are used at the cathode. They do not travel through the solutions. Ions carry the charge there.

    Mg electrode → wire → Ni electrode

Why this works. Name an electrode by its job, not by its position. Oxidation happens at the anode. Reduction happens at the cathode. In a voltaic cell the anode is negative and the cathode is positive.

Check your answer. The half with the lower table value is the one that loses electrons. Mg is lower than Ni, so Mg is the anode.

Common mistake. Swapping the anode and cathode because the metal with the more negative value “sounds” like the cathode.

Answer: Anode: Mg (negative). Cathode: Ni (positive). Electrons go from Mg through the wire to Ni

Question type

Write both half-reactions, match the electrons, and find E°cell

Use this when: The question gives a cell and table values and asks for the half-reactions, the overall reaction and E°cell.

Example. A cell has an aluminium electrode in Al³⁺(aq) and a silver electrode in Ag⁺(aq), joined by a wire and a salt bridge. Table values: E°(Al³⁺/Al) = −1.66 V and E°(Ag⁺/Ag) = +0.80 V. Write the half-reaction at each electrode and the overall reaction. Find E°cell.
  1. Choose the roles.

    Ag⁺/Ag has the higher value, so Ag⁺ is reduced at the cathode. Al is oxidized at the anode.

    anode: Al. cathode: Ag

  2. Write the anode half.

    Al loses electrons to become Al³⁺. The charge 3+ needs 3 electrons.

    Al → Al³⁺ + 3e⁻

  3. Write the cathode half.

    Each Ag⁺ takes just 1 electron.

    Ag⁺ + e⁻ → Ag

  4. Match the electrons.

    The anode gives 3e⁻ and the cathode takes 1e⁻. Multiply the silver half by 3.

    3Ag⁺ + 3e⁻ → 3Ag

  5. Add the halves and cancel the electrons.

    Nothing else repeats on opposite sides.

    Al + 3Ag⁺ → Al³⁺ + 3Ag

  6. Find E°cell.

    E°cell = E°cathode − E°anode. Standard means 1.0 mol/L, 25.00 °C and 101.325 kPa. Use each table value as printed, not multiplied by 3.

    E°cell = +0.80 − (−1.66) = +2.46 V

  7. Check the sign.

    A positive E°cell means the cell runs as written.

    positive ✓

Why this works. The cell potential E°cell is cathode minus anode, using the table values for reduction. The coefficients used to match electrons do not change it.

Check your answer. Atoms and charge: Al 1, Ag 3, charge +3 on each side. The result is large because Al is far below Ag in the table.

Common mistake. Multiplying +0.80 V by 3 before subtracting. E°cell never changes with the coefficients.

Answer: Al + 3Ag⁺ → Al³⁺ + 3Ag, E°cell = +2.46 V

Question type

Say what the salt bridge does and which ions move where

Use this when: The question gives a cell with a salt bridge and asks why it is needed, or which ions move toward which half-cell.

Example. A cell is Mg(s) | Mg²⁺(aq) || Ni²⁺(aq) | Ni(s). The salt bridge holds KNO₃(aq). Without the bridge the voltmeter falls to zero. Say why. Say which ions move toward each half-cell. For each 0.200 mol of electrons that pass, how many mol of positive charge appear in the anode half-cell?
  1. Find what changes in the anode half-cell.

    At the anode, Mg becomes Mg²⁺. The solution there gains positive charge.

    Mg → Mg²⁺ + 2e⁻: positive charge builds up

  2. Find what changes in the cathode half-cell.

    At the cathode, Ni²⁺ ions leave the solution and become Ni metal. That leaves extra negative ions behind.

    Ni²⁺ + 2e⁻ → Ni: positive charge is lost

  3. Say why the cell stops without a bridge.

    The build-up of charge in each beaker pushes back against the electrons, so they stop.

    voltmeter reading falls to zero

  4. Say what the bridge does.

    The salt bridge holds unreactive ions. They move between the beakers and keep each beaker’s charge balanced. The bridge carries ions, not electrons.

    ions move in the bridge; electrons move in the wire

  5. Match ions to the half-cells.

    Extra positive charge pulls in negative ions, called anions. A shortage of positive charge pulls in positive ions, called cations.

    NO₃⁻ moves toward the Mg (anode) half-cell. K⁺ moves toward the Ni (cathode) half-cell

  6. Find the charge made at the anode.

    Each Mg gives 2 electrons and makes 1 Mg²⁺. So 0.200 mol of electrons make half as many mol of Mg²⁺.

    0.200 mol e⁻ ÷ 2 = 0.100 mol Mg²⁺

  7. Convert to positive charge.

    Each Mg²⁺ carries 2 units of positive charge.

    0.100 mol × 2 = 0.200 mol of positive charge, balanced by 0.200 mol of NO₃⁻ moving in

Why this works. The salt bridge completes the circuit. Electrons move in the wire. Ions move in the solutions and the bridge. The ions of the bridge are not part of the reaction.

Check your answer. The positive charge made at the anode equals the electrons that passed. Both are 0.200 mol.

Common mistake. Saying that electrons travel through the salt bridge. Only ions can.

Answer: The charge builds up without a bridge. NO₃⁻ moves toward Mg and K⁺ moves toward Ni. 0.200 mol of positive charge

Question type

Write cell notation with the anode on the left

Use this when: The question describes a cell and asks for its one-line notation, including the bars and the state symbols.

Example. A cell has an iron electrode in Fe²⁺(aq) and a copper electrode in Cu²⁺(aq), with a salt bridge. Table values: E°(Fe²⁺/Fe) = −0.45 V and E°(Cu²⁺/Cu) = +0.34 V. Write the cell notation. State what each kind of vertical bar means.
  1. Find the anode and the cathode.

    Cu²⁺/Cu has the higher value, so Cu is the cathode. Fe is oxidized, so Fe is the anode.

    anode: Fe. cathode: Cu

  2. Write the anode half on the far left.

    Write each half from the solid metal to its ion, with state symbols.

    Fe(s) | Fe²⁺(aq)

  3. Write the cathode half on the far right.

    Write the cathode half from its ion to its metal, so the metal ends up at the far right.

    Cu²⁺(aq) | Cu(s)

  4. Join the halves with the double bar.

    The double bar || stands for the salt bridge.

    Fe(s) | Fe²⁺(aq) || Cu²⁺(aq) | Cu(s)

  5. Say what a single bar means.

    A single vertical bar separates two different phases, such as a solid electrode and the solution around it.

    |: phase boundary. ||: salt bridge

  6. Check the order.

    Left to right follows the electrons: oxidation at the left, reduction at the right. No coefficients are used.

    oxidation | double bar | reduction ✓

Why this works. Cell notation is a one-line map of the cell. The anode is on the far left and the cathode is on the far right. Each half goes from solid to ion on the left side, and from ion to solid on the right side.

Check your answer. The species on the left of the double bar is the one that is oxidized. Iron goes from Fe to Fe²⁺, which is oxidation.

Common mistake. Leaving out the state symbols, or writing the cathode half as Cu(s) | Cu²⁺(aq).

Answer: Fe(s) | Fe²⁺(aq) || Cu²⁺(aq) | Cu(s)

Question type

Read a cell notation to find the half-reactions, the overall reaction and E°cell

Use this when: The question gives the notation and asks for the overall reaction or the cell potential.

Example. A cell is written Al(s) | Al³⁺(aq) || Cu²⁺(aq) | Cu(s). Table values: E°(Al³⁺/Al) = −1.66 V and E°(Cu²⁺/Cu) = +0.34 V. Write the half-reactions and the overall reaction. Find E°cell.
  1. Read the left side first.

    The species on the left of the double bar is oxidized, so Al is the anode.

    anode: Al. cathode: Cu

  2. Write the anode half.

    Al becomes Al³⁺ and gives 3 electrons.

    Al → Al³⁺ + 3e⁻

  3. Write the cathode half.

    Cu²⁺ takes 2 electrons to become Cu.

    Cu²⁺ + 2e⁻ → Cu

  4. Match the electrons.

    The halves move 3e⁻ and 2e⁻. The smallest common total is 6. Multiply the anode half by 2 and the cathode half by 3.

    2Al → 2Al³⁺ + 6e⁻ | 3Cu²⁺ + 6e⁻ → 3Cu

  5. Add and cancel.

    The 6e⁻ cancel. Nothing else repeats.

    2Al + 3Cu²⁺ → 2Al³⁺ + 3Cu

  6. Find E°cell.

    Cathode minus anode. Do not multiply by 2 or 3.

    E°cell = +0.34 − (−1.66) = +2.00 V

  7. Check the notation against the table.

    The cathode has the higher value, so the notation is in the right order.

    +0.34 V is higher than −1.66 V ✓

Why this works. Read the notation from the left. The left half is the anode and the right half is the cathode. The notation shows no coefficients, so you add them when you match the electrons.

Check your answer. Atoms and charge: Al 2, Cu 3, charge +6 on each side. The positive E°cell agrees with the notation.

Common mistake. Writing 2Al³⁺ and 3Cu²⁺ in the notation, or using the multipliers in E°cell.

Answer: 2Al + 3Cu²⁺ → 2Al³⁺ + 3Cu, E°cell = +2.00 V

Question type

Predict the changes at each electrode and in each solution

Use this when: The question gives a running cell and asks for changes in mass, concentration and colour.

Example. The cell Ni(s) | Ni²⁺(aq) || Cu²⁺(aq) | Cu(s) runs. Both solutions start at 1.0 mol/L. Table values: E°(Ni²⁺/Ni) = −0.26 V and E°(Cu²⁺/Cu) = +0.34 V. The Data Booklet colour table lists nickel(II) as blue-green and copper(II) as blue at 1.0 mol/L, and copper(II) as pale blue at 0.010 mol/L. Predict what happens to each electrode and each solution. When 0.0250 mol of electrons pass, find the mass change of each electrode. Ni is 58.69 g/mol and Cu is 63.55 g/mol.
  1. Write the half-reaction at each electrode.

    The notation shows Ni on the left, so it is the anode. Cu is the cathode. Every prediction comes from these halves.

    anode: Ni → Ni²⁺ + 2e⁻. cathode: Cu²⁺ + 2e⁻ → Cu

  2. Predict the anode.

    Ni atoms leave the electrode as Ni²⁺. The electrode loses mass and Ni²⁺ in its beaker increases.

    Ni loses mass. The blue-green colour deepens

  3. Predict the cathode.

    Cu²⁺ ions become Cu metal on the electrode. The electrode gains mass and Cu²⁺ in its beaker decreases.

    Cu gains mass. The blue colour fades toward pale blue

  4. Find the moles of metal that react.

    Each Ni or Cu atom involves 2 electrons.

    0.0250 mol ÷ 2 = 0.01250 mol

  5. Find the mass of nickel lost.

    Use m = n × M. Keep four digits for now.

    0.01250 mol × 58.69 g/mol = 0.7336 g

  6. Find the mass of copper gained.

    The same moles of copper are deposited.

    0.01250 mol × 63.55 g/mol = 0.7944 g

  7. Round the final answers.

    Round only now, to three digits.

    Ni loses 0.734 g. Cu gains 0.794 g

Why this works. Every observation comes from a half-reaction. Look at what is made and what is used up at each electrode. A metal anode loses mass and a metal cathode gains mass.

Check your answer. The masses are different because the molar masses are different, but the moles are equal.

Common mistake. Mixing up the two electrodes. The anode loses mass and the cathode gains mass.

Answer: Ni electrode loses 0.734 g and its blue-green solution deepens. Cu electrode gains 0.794 g and its blue solution fades

Question type

Use the sign of E°cell to catch swapped electrodes

Use this when: The question gives two negative table values and a student answer with a negative E°cell, and asks you to find the error.

Example. Table values: E°(Cd²⁺/Cd) = −0.40 V and E°(Pb²⁺/Pb) = −0.13 V. A student takes cadmium as the cathode and gets E°cell = −0.40 − (−0.13) = −0.27 V. Find the error. Name the real anode and cathode. Write the notation and the correct E°cell.
  1. Compare the two values.

    The higher value is the one closer to zero. −0.13 is higher than −0.40.

    Pb²⁺/Pb is higher than Cd²⁺/Cd

  2. Find the student’s error.

    The student put the lower value at the cathode. A negative E°cell warns that the electrodes are swapped.

    Cd was wrongly made the cathode

  3. Name the real roles.

    The higher value is reduced at the cathode. The lower value is oxidized at the anode.

    cathode: Pb. anode: Cd

  4. Write the notation.

    Anode on the left, cathode on the right, with state symbols.

    Cd(s) | Cd²⁺(aq) || Pb²⁺(aq) | Pb(s)

  5. Find the correct E°cell.

    Cathode minus anode. Subtracting a negative number adds.

    E°cell = −0.13 − (−0.40) = +0.27 V

  6. Check against the student’s value.

    Swapping the electrodes only flips the sign.

    −0.27 V and +0.27 V

Why this works. E°cell = E°cathode − E°anode with each table value used as printed. If the answer is negative, the electrodes are swapped. Put the half with the higher value at the cathode.

Check your answer. The two answers are equal in size and opposite in sign, which is what a swap does.

Common mistake. Choosing the cathode because its number looks bigger without its sign. Between −0.13 and −0.40, the higher value is −0.13.

Answer: Error: the electrodes were swapped. Anode Cd, cathode Pb. Cd(s) | Cd²⁺(aq) || Pb²⁺(aq) | Pb(s). E°cell = +0.27 V

Question type

Find the anode and the notation when the drawing has the anode on the right

Use this when: The question shows a drawing with the electrodes in an unusual position and asks for the anode, the notation, the electron direction and E°cell.

Example. A drawing shows a silver electrode in Ag⁺(aq) on the left and a cobalt electrode in Co²⁺(aq) on the right, joined by a wire and a salt bridge. Table values: E°(Ag⁺/Ag) = +0.80 V and E°(Co²⁺/Co) = −0.28 V. Find the anode. Say which way the electrons travel in the wire. Write the cell notation, the overall reaction and E°cell.
  1. Ignore the drawing and compare the values.

    Where an electrode is drawn does not tell you if it is the anode. The table values do.

    +0.80 V is higher than −0.28 V

  2. Name the electrodes.

    Ag⁺ has the higher value, so Ag is the cathode. Co is oxidized, so Co is the anode.

    cathode: Ag (left in the drawing). anode: Co (right in the drawing)

  3. Give the electron direction.

    Electrons leave the anode and go to the cathode. In this drawing the anode is on the right.

    right to left through the wire

  4. Write the notation.

    Notation always puts the anode on the far left, whatever the drawing shows.

    Co(s) | Co²⁺(aq) || Ag⁺(aq) | Ag(s)

  5. Match the electrons and add.

    Co gives 2e⁻ and Ag⁺ takes 1e⁻. Multiply the silver half by 2, then add.

    Co + 2Ag⁺ → Co²⁺ + 2Ag

  6. Find E°cell.

    Cathode minus anode, as always.

    E°cell = +0.80 − (−0.28) = +1.08 V

Why this works. A drawing can be flipped. The reduction values decide the anode, not left and right. Notation and E°cell do not depend on how the beakers are drawn.

Check your answer. The notation and the voltage would be the same if the drawing were flipped back.

Common mistake. Treating the left electrode as the anode because it is on the left.

Answer: Anode Co, on the right. Electrons go right to left. Co(s) | Co²⁺(aq) || Ag⁺(aq) | Ag(s). Co + 2Ag⁺ → Co²⁺ + 2Ag. E°cell = +1.08 V

Diploma-style questions

Try each question first. Then open the worked solution.

Numerical response · outcome 30-B2.3k
A cell has a nickel electrode in Ni²⁺(aq) and a silver electrode in Ag⁺(aq). Table values: E°(Ni²⁺/Ni) = −0.26 V and E°(Ag⁺/Ag) = +0.80 V. Find E°cell. Record your answer as a.bc V. Enter the digits a, b and c.
Show the worked solution (try the question first)
  1. Choose the roles.

    Ag⁺/Ag has the higher value, so Ag is the cathode. Ni is the anode.

    cathode: Ag. anode: Ni

  2. Subtract.

    E°cell = E°cathode − E°anode. Do not multiply by the coefficient 2.

    E°cell = +0.80 − (−0.26) = +1.06 V

  3. Enter the digits.

    The value is 1.06, so a = 1, b = 0 and c = 6.

    record 1 0 6

Answer: +1.06 V. Record 1 0 6.

Multiple choice · outcome 30-B2.2k
A cell has a tin electrode in Sn²⁺(aq) and a copper electrode in Cu²⁺(aq), with a salt bridge. Table values: E°(Sn²⁺/Sn) = −0.14 V and E°(Cu²⁺/Cu) = +0.34 V. Which cell notation is correct?
  1. A. Cu(s) | Cu²⁺(aq) || Sn²⁺(aq) | Sn(s)
  2. B. Sn | Sn²⁺ || Cu²⁺ | Cu
  3. C. Sn(s) | Sn²⁺(aq) || Cu²⁺(aq) | Cu(s)
  4. D. Sn(s) | Sn²⁺(aq) | Cu²⁺(aq) | Cu(s)
Show the worked solution (try the question first)
  1. Find the anode.

    Cu²⁺/Cu has the higher value, so Cu is the cathode and Sn is the anode.

    anode: Sn. cathode: Cu

  2. Put the anode on the left.

    The anode goes on the far left and the cathode on the far right.

    Sn first, Cu last

  3. Check the bars and symbols.

    The salt bridge is a double bar. Each species needs a state symbol.

    Sn(s) | Sn²⁺(aq) || Cu²⁺(aq) | Cu(s)

Why each choice is right or wrong

  • A. The electrodes are swapped. Copper is the cathode, so it belongs on the right.
  • B. The order is right, but the state symbols are missing. A complete notation has (s) and (aq).
  • C. Correct. The anode Sn is on the left, the double bar is the salt bridge, and every species has a state symbol.
  • D. The salt bridge is shown by a double bar. A single bar only separates phases.

Answer: C

Multiple choice · outcome 30-B2.3k
The cell Co(s) | Co²⁺(aq) || Cu²⁺(aq) | Cu(s) is running. Table values: E°(Co²⁺/Co) = −0.28 V and E°(Cu²⁺/Cu) = +0.34 V. Which statement about the electrodes is correct?
  1. A. The Co electrode gains mass and the Cu²⁺ concentration falls.
  2. B. The Co electrode loses mass and the Cu electrode gains mass.
  3. C. Both electrodes gain mass because both ions are reduced.
  4. D. The Cu electrode loses mass and the Co²⁺ concentration falls.
Show the worked solution (try the question first)
  1. Name the electrodes.

    Co is on the left, so it is the anode. Cu is the cathode.

    anode: Co → Co²⁺ + 2e⁻. cathode: Cu²⁺ + 2e⁻ → Cu

  2. Predict each electrode.

    A metal anode dissolves and loses mass. A metal cathode gains mass as ions become metal.

    Co loses mass; Cu gains mass

  3. Choose.

    Match the statement.

    answer B

Why each choice is right or wrong

  • A. The electrodes are swapped. Co is oxidized, so it loses mass, and Cu²⁺ is reduced, so its concentration falls at the copper electrode.
  • B. Correct. Co → Co²⁺ + 2e⁻ at the anode, so Co loses mass. Cu²⁺ + 2e⁻ → Cu at the cathode, so Cu gains mass.
  • C. Only the cathode gains mass. At the anode the metal is oxidized and dissolves.
  • D. The roles are reversed. Copper is the cathode, so it gains mass. Co²⁺ is made at the anode, so its concentration rises.

Answer: B

Multiple choice · outcome 30-B2.1k
The cell Mg(s) | Mg²⁺(aq) || Cu²⁺(aq) | Cu(s) uses a salt bridge of NaNO₃(aq). Which statement is correct while the cell runs?
  1. A. Electrons move through the salt bridge from Mg to Cu.
  2. B. Electrons move through the wire from Cu to Mg.
  3. C. Electrons move through the wire from Mg to Cu, and NO₃⁻ moves toward the Mg half-cell.
  4. D. Electrons move through the wire from Mg to Cu, and NO₃⁻ moves toward the Cu half-cell.
Show the worked solution (try the question first)
  1. Find the electron path.

    Mg is the anode. Electrons leave Mg, go through the wire, and arrive at Cu.

    Mg → wire → Cu

  2. Find the ion movement.

    Mg²⁺ is made at the anode, so extra positive charge builds up there. Anions move toward it.

    NO₃⁻ moves toward the Mg half-cell

  3. Choose.

    Both parts must be right.

    answer C

Why each choice is right or wrong

  • A. Electrons never travel through the salt bridge. Only ions do.
  • B. Electrons leave the anode, which is Mg. They go from Mg to Cu.
  • C. Correct. The electrons go Mg → wire → Cu. Positive charge builds up at the Mg half-cell, so anions move toward it.
  • D. The electron path is right, but NO₃⁻ moves toward the Mg half-cell, where positive charge builds up. Cations move toward the Cu half-cell.

Answer: C