B6 · Voltaic cells · Notes

Download the printable PDF

Goals: Explain why a voltaic cell separates the half-reactions and needs a salt bridge. Identify the anode and cathode, and write cell notation and half-reactions. Predict observations and calculate the standard cell potential.

Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.

Slide 1 of 9 · Why separate the halves?

Key ideas

Zinc atoms give up electrons and Cu²⁺ ions take them, so zinc in copper(II) sulfate solution is a reaction.

When zinc touches the ions, electrons jump straight across the surface and the energy spreads out as .

To get useful work, keep the two halves and let the electrons travel only through a .

A cell that turns chemical energy into electrical energy is a cell (also called a galvanic cell). One electrode plus its solution is a .

Example

Zinc placed in copper(II) sulfate solution slowly becomes coated with copper, and the solution warms. How could we use that electron transfer to run a device? Sketch the cell.

Try it

Zinc metal is placed directly in Cu²⁺(aq). What happens to the energy released? Name the energy change when the same reaction runs in a voltaic cell.

Slide 2 of 9 · Which electrode is which?

Key ideas

The ion with the table value is the stronger oxidizing agent, so it is reduced. The metal in the other row is oxidized.

The is where oxidation happens. The is where reduction happens. Memory aid: AN OX (anode, oxidation) and RED CAT (reduction, cathode).

In a voltaic cell the anode is and the cathode is .

Electrons leave the anode, travel through the and are used up at the cathode. Ions carry the charge in the .

Example

Given E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. A voltaic cell joins the two half-cells. Which metal is oxidized? Name the anode and cathode, give their signs, and say which way the electrons travel.

Try it

Given E°(Mg²⁺/Mg) = −2.37 V and E°(Zn²⁺/Zn) = −0.76 V. A voltaic cell joins the two half-cells. Which metal is the anode, which electrode is positive, and which way do the electrons travel?

Slide 3 of 9 · The salt bridge keeps charge balanced

Key ideas

At the anode, Zn atoms make Zn²⁺ ions, so that beaker gains charge. At the cathode, Cu²⁺ ions leave, so extra ions (anions) remain.

The charge build-up pushes back on the electrons, and the voltmeter reading falls to .

A salt bridge holds unreactive ions, such as sodium nitrate. It joins the two solutions and carries but no electrons. A porous barrier does the same job.

Anions move toward the beaker, which gains positive charge. Cations move toward the beaker, which loses positive charge.

Example

A Zn / Cu cell is joined with wires only. After a short time the voltmeter reading falls to zero. What stops the cell, and how does a salt bridge fix it?

Try it

In the Zn / Cu cell, the salt bridge contains NaNO₃(aq). Toward which beaker do the Na⁺ ions move, and why?

Slide 4 of 9 · Cell notation

Key ideas

In cell notation, the goes on the far left and the goes on the far right.

Each half is written from the metal to its ion. A single line | separates two different .

The double line || stands for the or porous barrier. Always include such as (s) and (aq).

To write the overall reaction, take the left half as and the right half as reduction. Match the electrons, add the halves and cancel them.

Example

In a Zn / Cu cell, zinc is the anode and copper is the cathode. Write the cell notation and the overall reaction.

Try it

Given the cell notation Mg(s) | Mg²⁺(aq) || Ag⁺(aq) | Ag(s). Write the oxidation half-reaction, the reduction half-reaction and the overall reaction.

Slide 5 of 9 · Your turn: copper and silver

Key ideas

Compare the table values first. Ag⁺/Ag is V and Cu²⁺/Cu is +0.34 V, so silver ions are reduced at the .

Each Ag⁺ takes electron but the copper anode gives . Multiply the silver half by 2: 2Ag⁺ + 2e⁻ → .

E° is multiplied by a coefficient. The doubled silver half still has the value +0.80 V. Overall: Cu + 2Ag⁺ → .

Notation: Cu(s) | Cu²⁺(aq) Ag⁺(aq) | Ag(s). Cell notation has no .

Example

Given Cu²⁺ + 2e⁻ → Cu (+0.34 V) and Ag⁺ + e⁻ → Ag (+0.80 V). A cell has a copper electrode in Cu²⁺(aq), a silver electrode in Ag⁺(aq), a wire and a salt bridge. Name the anode, write the half-reactions and overall reaction, and write the cell notation.

Try it

Given Al³⁺ + 3e⁻ → Al (−1.66 V) and Cu²⁺ + 2e⁻ → Cu (+0.34 V). A cell has an aluminium electrode in Al³⁺(aq), a copper electrode in Cu²⁺(aq) and a salt bridge. Name the anode, write the overall reaction and write the cell notation.

Slide 6 of 9 · Predict what you would observe

Key ideas

Every prediction comes from a . Ask what is made and what is used up at each electrode.

At the copper anode, Cu → Cu²⁺ + 2e⁻, so the electrode mass and the Cu²⁺ concentration goes . The Data Booklet lists Cu²⁺ as blue (p. 11), so the blue gets deeper.

At the silver cathode, 2Ag⁺ + 2e⁻ → 2Ag, so the electrode mass and the Ag⁺ concentration goes .

Ag⁺ is in water, so there is no colour change at the cathode. A metal anode loses mass and a metal cathode gains mass.

Example

The Cu / Ag cell Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s) is running. Predict what happens to each electrode and each solution as the cell operates.

Try it

The Zn / Cu cell Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s) is running. Predict the mass change of each electrode and the change in the blue colour of the copper solution.

Slide 7 of 9 · Cell potential

Key ideas

Standard conditions mean mol/L solutions, 25.00 °C (298.15 K) and kPa for gases.

E°cell = E° − E°. Use each table value as printed, even for the anode.

For the Zn / Cu cell, E°cell = 0.34 − (−0.76) = V. Subtracting a negative number .

A positive E°cell means the cell reaction runs as . A negative value warns that the anode and cathode are . Never multiply E° by a coefficient.

Example

Given E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. Zinc is the anode and copper is the cathode. Calculate E°cell. Then swap the electrodes and say what the sign tells you.

Try it

Given E°(Fe²⁺/Fe) = −0.45 V and E°(Ag⁺/Ag) = +0.80 V. Iron is the anode and silver is the cathode. Calculate E°cell and say whether the cell reaction runs as written.

Slide 8 of 9 · Method: how to describe a voltaic cell

Key ideas

Step 1. Write the two . Oxidation happens at the . Reduction happens at the cathode.

Step 2. Trace the . They travel through the wire from the anode to the cathode.

Step 3. Place the salt bridge ions. move toward the anode. Cations move toward the cathode.

Step 4. Write the cell , with the anode on the left and the cathode on the right.

Step 5. E°cell = E° − E°anode.

Step 6. Predict what you would see. Check: E°cell is for a working cell.

Example

Use the method on a cell with Cu in Cu²⁺(aq) and Ag in Ag⁺(aq). E°(Cu²⁺/Cu) = +0.34 V and E°(Ag⁺/Ag) = +0.80 V. Describe the cell.

Try it

Use the method on a cell with Zn in Zn²⁺(aq) and Cu in Cu²⁺(aq). E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. Find the anode, the notation and E°cell.

Slide 9 of 9 · A cell drawn the other way

Key ideas

Where an electrode is drawn does show which one is the anode. Use the table values.

E°(Ag⁺/Ag) = +0.80 V is higher than E°(Zn²⁺/Zn) = V, so silver is the and zinc is the anode.

If the anode is drawn on the right, the electrons travel through the wire from to left.

In cell notation the anode is always on the . E°cell = E°cathode − E°anode = V, and redrawing the cell does not change it.

Example

Given E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V. A drawing shows the silver half-cell on the left and the zinc half-cell on the right. Find the anode, write the cell notation and find E°cell.

Try it

Given E°(Cu²⁺/Cu) = +0.34 V and E°(Mg²⁺/Mg) = −2.37 V. A drawing shows the copper half-cell on the left and the magnesium half-cell on the right. Find the anode, write the cell notation and find E°cell.

Practice 1

Given the Data Booklet table values E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V. A cell has a zinc electrode in Zn²⁺(aq) and a silver electrode in Ag⁺(aq). Name the anode and the cathode, and state the direction of electron flow in the wire.

Practice 2

Given a cell in which Mg(s) is oxidized and Cu²⁺(aq) is reduced, with a salt bridge. Write the cell notation.

Practice 3

Given the Cu / Ag cell, Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s), with a salt bridge containing NaNO₃(aq). Toward which beaker do the NO₃⁻ ions move, and why?

Practice 4

Given the Cu / Ag cell, Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s), running. Predict the change in mass of each electrode and the change in the blue colour of the copper solution.

Practice 5

A student builds the Zn / Cu cell with wires but no salt bridge or porous barrier. The voltmeter reading drops to zero after a moment. Explain why.

Practice 6

Given the Data Booklet table values E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V. Find E°cell for the cell with zinc as the anode and silver as the cathode.

Practice 7

Challenge: Given the Data Booklet table values E°(Al³⁺/Al) = −1.66 V and E°(Ni²⁺/Ni) = −0.26 V. Both values are negative. A voltaic cell is built from these two half-cells. Name the anode, write the cell notation and the net equation, and find E°cell in volts.