B16 · Worked examples

Every Unit B problem is a cell, a charge or a titration. Choose the method first. Voltage or direction uses table values. Current and time, or a mass at an electrode, uses Faraday’s law. A concentration from a reacting volume uses a titration. The unit A is the ampere, which is coulombs per second. The unit C is the coulomb. The Faraday constant is 9.65 × 10⁴ C/mol e⁻, which means coulombs per mole of electrons.

Open the B16 lesson · B16 slide notes

Worked question types

Each example shows every step, why you do it, and the idea behind it.

Question type

Choose the method from what is given and the unknown

Use this when: The question describes a cell, a charge or a reaction in a flask, and you must decide which method to use before you calculate.

Example. Choose the method for each question: table values, Faraday’s law or a titration. Q1: Find the voltage of a cell made from Mg and Cu half-cells. Q2: A current of 2.0 A runs for 10 minutes. Find the mass of copper deposited. Q3: A known permanganate solution is added to an iron(II) sample. Find the concentration of iron(II). Q4: Does Zn react with H⁺(aq) by itself? Q5: How long must 1.50 A run to plate 1.00 g of silver?
  1. Read the unknown first.

    Use Method: how to choose the method. The unknown points to the method. Voltage, direction and the anode point to table values.

    Q1 asks for a voltage. Q4 asks about direction

  2. Look for a current or a time.

    A current in amperes with a time, or a mass at an electrode, points to Faraday’s law.

    Q2 gives a current and a time. Q5 gives a current and a mass

  3. Look for a reacting volume.

    A concentration found from the volume of a solution that reacts is a titration.

    Q3 uses a solution added to a sample

  4. Write the choices.

    Name the method before you touch the calculator.

    Q1 table. Q2 Faraday. Q3 titration. Q4 table. Q5 Faraday

  5. Check one that is easy to get wrong.

    Q5 asks for a time, but it still uses the charge chain, run backward from the mass.

    mass → moles → moles of e⁻ → charge → time

Why this works. Many wrong answers use the right numbers in the wrong method. Naming the method first stops this. The method decides the whole chain of steps, so a wrong choice cannot be fixed later.

Check your answer. Each method has its own kind of given: table values, current and time, or a volume and a concentration.

Common mistake. Using the table whenever a metal is named. A named metal does not make it a table question. Check for a current or a volume.

Answer: Q1 table values. Q2 Faraday. Q3 titration. Q4 table values. Q5 Faraday

Question type

Use the sign of E°reaction to choose the cell type and name the electrodes

Use this when: The question gives a reaction and table values and asks if it needs a power supply, which cell type it is, or where oxidation and reduction happen.

Example. Table values: E°(Fe²⁺/Fe) = −0.45 V, E°(Mg²⁺/Mg) = −2.37 V and E°(Ag⁺/Ag) = +0.80 V. Reaction R1 is Mg + Fe²⁺ → Mg²⁺ + Fe. Reaction R2 is 2Ag + Fe²⁺ → 2Ag⁺ + Fe. For each, find E°reaction. Say if it is a voltaic cell or an electrolytic cell. Name the anode and the cathode.
  1. Find what is reduced and what is oxidized in R1.

    Mg goes from 0 to +2, so it is oxidized. Fe²⁺ goes to Fe, so it is reduced.

    Mg oxidized, Fe²⁺ reduced

  2. Subtract for R1.

    E°reaction is the table value of the particle that is reduced minus the table value of the particle that is oxidized.

    E°reaction = −0.45 V − (−2.37 V) = +1.92 V

  3. Choose the cell type for R1.

    A positive value means the reaction runs by itself. That is a voltaic cell.

    R1: voltaic. Anode Mg, cathode Fe

  4. Find what is reduced and what is oxidized in R2.

    Ag goes from 0 to +1, so it is oxidized. Fe²⁺ is reduced.

    Ag oxidized, Fe²⁺ reduced

  5. Subtract for R2.

    Use the same rule. The table value of Ag⁺/Ag is the oxidized pair.

    E°reaction = −0.45 V − (+0.80 V) = −1.25 V

  6. Choose the cell type for R2.

    A negative value means the reaction does not run by itself. It needs a power supply, so it is an electrolytic cell. The supply must give more than 1.25 V.

    R2: electrolytic. Anode Ag, cathode Fe

Why this works. The sign of E°reaction chooses the cell type. The electrode names do not depend on the cell type. Oxidation is always at the anode, and reduction is always at the cathode.

Check your answer. R1 is positive and R2 is negative. Reversing R2 gives +1.25 V, so the reverse of R2 runs by itself.

Common mistake. Thinking that an electrolytic cell has its electrode names swapped. The names always follow what happens at the electrode.

Answer: R1: E°reaction = +1.92 V, voltaic, anode Mg, cathode Fe. R2: E°reaction = −1.25 V, electrolytic, anode Ag, cathode Fe, needs more than 1.25 V

Question type

Table method: combine half-reactions and find E°reaction

Use this when: The question names two half-cells and asks for the cell reaction and its voltage.

Example. Aluminium and copper half-cells are both 1.0 mol/L. Table values: E°(Al³⁺/Al) = −1.66 V and E°(Cu²⁺/Cu) = +0.34 V. Find the cell reaction and E°reaction. Say if it is voltaic or electrolytic.
  1. Choose the roles.

    The lower table value is oxidized at the anode. The higher value is reduced at the cathode.

    −1.66 V is lower: Al is the anode, Cu²⁺ is reduced at the cathode

  2. Write the two halves.

    The anode half runs backward from the table. The cathode half runs as printed.

    Al → Al³⁺ + 3e⁻ Cu²⁺ + 2e⁻ → Cu

  3. Match the electrons.

    The aluminium half has 3e⁻ and the copper half has 2e⁻. The smallest number both go into is 6.

    3 and 2 → 6

  4. Multiply each half.

    Multiply every term of the aluminium half by 2 and every term of the copper half by 3.

    aluminium × 2: 2Al → 2Al³⁺ + 6e⁻ | copper × 3: 3Cu²⁺ + 6e⁻ → 3Cu

  5. Add the halves. Write every term before you cancel.

    List all the left terms and all the right terms.

    2Al + 3Cu²⁺ + 6e⁻ → 2Al³⁺ + 6e⁻ + 3Cu

  6. Cancel identical terms on opposite sides.

    Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.

    cancelled: e⁻ → 2Al + 3Cu²⁺ → 2Al³⁺ + 3Cu

  7. Check atoms and charge.

    Both must match on the two sides.

    charge: +6 = +6 ✓ atoms: Al 2, Cu 3 ✓

  8. Subtract.

    Cathode value minus anode value. Do not multiply by the coefficients 2 and 3.

    E°reaction = +0.34 V − (−1.66 V) = +2.00 V

  9. Name the cell type.

    A positive value means the reaction runs by itself.

    voltaic

Why this works. The electrons tell you the mole ratio. Here 6 electrons are the smallest number that 3 and 2 both go into. The table values are not multiplied, because voltage is energy for each coulomb.

Check your answer. Check atoms and charge: Al 2, Cu 3, and +6 on each side. The voltage is positive, so the direction is spontaneous.

Common mistake. Multiplying +0.34 V by 3 or −1.66 V by 2. Each table value is used once, as printed.

Answer: 2Al + 3Cu²⁺ → 2Al³⁺ + 3Cu. E°reaction = +2.00 V. Voltaic cell

Question type

Faraday method: find the mass deposited from a current and a time

Use this when: The question gives a current and a time, a metal ion and its molar mass, and asks for a mass at an electrode.

Example. A current of 2.45 A runs for 30.0 min through Ni²⁺(aq). Nickel forms at the cathode. Use the Faraday constant 9.65 × 10⁴ C/mol e⁻ and M(Ni) = 58.69 g/mol. Find the mass of nickel.
  1. Choose the method.

    A current and a time are given, so use Faraday’s law.

    Faraday

  2. Convert the time to seconds.

    An ampere is coulombs per second, so the time must be in seconds.

    30.0 min × 60 = 1800 s

  3. Find the charge.

    Charge is current times time.

    q = I t = 2.45 A × 1800 s = 4410 C

  4. Find the moles of electrons.

    Divide the charge by the Faraday constant. Keep one extra digit.

    n(e⁻) = 4410 C ÷ (9.65 × 10⁴) = 0.04570 mol

  5. Write the half-reaction for the ratio.

    The ratio always comes from the half-reaction. Two electrons make one nickel atom.

    Ni²⁺ + 2e⁻ → Ni

  6. Find the moles of nickel.

    Divide the moles of electrons by 2.

    n(Ni) = 0.04570 ÷ 2 = 0.02285 mol

  7. Find the mass.

    Multiply by the molar mass. Round the final answer to three significant digits.

    m = 0.02285 mol × 58.69 g/mol = 1.341 g → 1.34 g

Why this works. The charge is the amount of electricity that moved. The Faraday constant converts charge into moles of electrons. The half-reaction converts moles of electrons into moles of metal.

Check your answer. If the ratio were wrongly 1 to 1, the mass would be 2.68 g, which is twice as large. The factor of the wrong ratio shows up in the answer.

Common mistake. Leaving the time in minutes. The ampere uses seconds, so the charge would be 60 times too small.

Answer: 1.34 g of nickel

Question type

Read the mole ratio from the half-reaction

Use this when: The question gives a charge or a current and time and says which ion is reduced, and asks for moles or mass for more than one metal.

Example. The same charge of 5790 C passes through three separate cells that hold Ag⁺, Cu²⁺ and Al³⁺. Each metal forms at the cathode. Find the moles of each metal. Find the mass of each. Use M(Ag) = 107.87 g/mol, M(Cu) = 63.55 g/mol and M(Al) = 26.98 g/mol.
  1. Find the moles of electrons.

    This is the same for all three cells, because the charge is the same.

    n(e⁻) = 5790 C ÷ (9.65 × 10⁴) = 0.0600 mol

  2. Write the three half-reactions.

    The number of electrons on the left is the number of moles of electrons for each mole of metal.

    Ag⁺ + e⁻ → Ag. Cu²⁺ + 2e⁻ → Cu. Al³⁺ + 3e⁻ → Al

  3. Divide by the electron number.

    Moles of metal are moles of electrons divided by the electrons per atom.

    n(Ag) = 0.0600 ÷ 1 = 0.0600 mol. n(Cu) = 0.0600 ÷ 2 = 0.0300 mol. n(Al) = 0.0600 ÷ 3 = 0.0200 mol

  4. Multiply by the molar masses.

    Round each final answer to three significant digits.

    Ag: 0.0600 × 107.87 = 6.4722 g → 6.47 g. Cu: 0.0300 × 63.55 = 1.9065 g → 1.91 g. Al: 0.0200 × 26.98 = 0.5396 g → 0.540 g

Why this works. The electron coefficient in the half-reaction is the ratio. More electrons are needed for each atom of aluminium than of silver. So the same charge makes fewer moles of aluminium. A wrong ratio changes the answer by that same factor.

Check your answer. The moles of metal fall in the order Ag, Cu, Al as the electron number rises. The moles of Ag : Cu : Al are in the ratio 6 : 3 : 2.

Common mistake. Using a 1 to 1 ratio for every metal. Write the half-reaction first and read the electrons from it.

Answer: n(Ag) = 0.0600 mol, n(Cu) = 0.0300 mol, n(Al) = 0.0200 mol. Masses: Ag 6.47 g, Cu 1.91 g, Al 0.540 g

Question type

Titration method: find the concentration of a reducing agent

Use this when: The question gives the volume of a sample and the volume and concentration of a solution that reacts with it, and asks for the concentration of the sample.

Example. A 25.00 mL sample of iron(II) solution needs 21.30 mL of 0.0180 mol/L MnO₄⁻ in acid to reach the end point. The half-reactions are MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O and Fe²⁺ → Fe³⁺ + e⁻. Find the concentration of Fe²⁺.
  1. Choose the method.

    A concentration from a reacting volume is a titration.

    titration

  2. Match the electrons.

    The permanganate half has 5e⁻ and the iron(II) half has 1e⁻. The smallest number both go into is 5.

    5 and 1 → 5

  3. Multiply each half.

    Multiply every term of the permanganate half by 1 and every term of the iron(II) half by 5.

    permanganate × 1: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O | iron(II) × 5: 5Fe²⁺ → 5Fe³⁺ + 5e⁻

  4. Add the halves. Write every term before you cancel.

    List all the left terms and all the right terms.

    MnO₄⁻ + 8H⁺ + 5e⁻ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺ + 5e⁻

  5. Cancel identical terms on opposite sides.

    Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.

    cancelled: e⁻ → MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺

  6. Check atoms and charge.

    Both must match on the two sides.

    charge: +17 = +17 ✓ atoms: Mn 1, O 4, H 8, Fe 5 ✓

  7. Convert each volume to litres.

    A concentration is in mol/L, so divide each volume in millilitres by 1000.

    21.30 mL = 0.02130 L. 25.00 mL = 0.02500 L

  8. Find the moles of permanganate.

    Amount equals concentration times volume.

    n(MnO₄⁻) = 0.02130 L × 0.0180 mol/L = 3.834 × 10⁻⁴ mol

  9. Use the ratio from the balanced equation.

    One MnO₄⁻ reacts with five Fe²⁺.

    n(Fe²⁺) = 5 × 3.834 × 10⁻⁴ = 1.917 × 10⁻³ mol

  10. Find the concentration.

    Divide by the sample volume in litres. Round the final answer to three significant digits.

    [Fe²⁺] = 1.917 × 10⁻³ mol ÷ 0.02500 L = 0.07668 mol/L → 0.0767 mol/L

Why this works. The balanced equation gives the mole ratio. The end point shows when exactly that ratio has been added. Moles come from concentration times volume in litres, and the unknown concentration is the moles divided by the sample volume.

Check your answer. The moles of iron(II) are 5 times the moles of permanganate. The sample volume is a little larger than the volume of permanganate used. So the concentration is a little under 5 × 0.0180 = 0.090 mol/L.

Common mistake. Using a 1 to 1 ratio, or leaving the volumes in millilitres. The ratio is 1 to 5 and the volumes must be in litres.

Answer: [Fe²⁺] = 0.0767 mol/L

Question type

Titration method: find the concentration of an oxidizing agent

Use this when: The question gives a standard reducing agent and asks for the concentration of the oxidizing agent, so the mole ratio runs the other way.

Example. A 25.00 mL sample of acidic MnO₄⁻ solution needs 18.75 mL of 0.0500 mol/L Fe²⁺ to reach the end point. The balanced equation is MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Find the concentration of MnO₄⁻.
  1. Choose the method.

    A concentration from a reacting volume is a titration.

    titration

  2. Convert each volume to litres.

    Divide each volume in millilitres by 1000.

    18.75 mL = 0.01875 L. 25.00 mL = 0.02500 L

  3. Find the moles of the known solution.

    This time the known solution is Fe²⁺.

    n(Fe²⁺) = 0.01875 L × 0.0500 mol/L = 9.375 × 10⁻⁴ mol

  4. Use the ratio the other way.

    Five Fe²⁺ react with one MnO₄⁻, so divide by 5.

    n(MnO₄⁻) = 9.375 × 10⁻⁴ ÷ 5 = 1.875 × 10⁻⁴ mol

  5. Find the concentration.

    Divide by the sample volume in litres. Round the final answer to three significant digits.

    [MnO₄⁻] = 1.875 × 10⁻⁴ mol ÷ 0.02500 L = 7.500 × 10⁻³ mol/L → 7.50 × 10⁻³ mol/L

Why this works. The ratio is read from the balanced equation, and the direction depends on which particle is known. Here the known substance has the larger coefficient, so its moles are divided by 5.

Check your answer. The permanganate sample has a larger volume (25.00 mL) than the iron(II) used (18.75 mL) and needs only one fifth of the moles. So its concentration is much smaller than 0.0500 mol/L.

Common mistake. Multiplying by 5 because the earlier example multiplied by 5. Check which particle is known and which is unknown.

Answer: [MnO₄⁻] = 7.50 × 10⁻³ mol/L

Question type

Choose a metal that protects iron from rusting

Use this when: The question gives table values and asks which metals protect iron, which is the sacrificial anode, or what role the iron has.

Example. Iron rusts because it is oxidized. Table values: E°(Fe²⁺/Fe) = −0.45 V, E°(Zn²⁺/Zn) = −0.76 V, E°(Sn²⁺/Sn) = −0.14 V and E°(Al³⁺/Al) = −1.66 V. A block of one metal is joined to a steel pipe in soil. Which of Zn, Sn and Al protect the iron? Name the role of the block and the pipe. Check Zn and Sn with E°reaction for reduction of Fe²⁺.
  1. Say what protection means.

    The iron must not be oxidized. Another metal must be oxidized instead.

    the block is oxidized, the pipe is not

  2. Compare the table values with iron.

    A metal with a lower value is a stronger reducing agent than iron. It is oxidized first.

    Zn −0.76 V and Al −1.66 V are lower than Fe −0.45 V. Sn −0.14 V is higher

  3. Check Zn with E°reaction.

    Zn + Fe²⁺ → Zn²⁺ + Fe. Fe²⁺ is reduced and Zn is oxidized.

    E°reaction = −0.45 V − (−0.76 V) = +0.31 V, spontaneous

  4. Check Sn with E°reaction.

    Sn + Fe²⁺ → Sn²⁺ + Fe.

    E°reaction = −0.45 V − (−0.14 V) = −0.31 V, not spontaneous

  5. Name the roles.

    The metal that is oxidized is the anode. It is used up, so it is called the sacrificial anode. Iron is reduced or left alone, so it is the cathode.

    block: sacrificial anode. pipe: cathode

Why this works. Protection works by giving the electrons to the iron. The more easily oxidized metal is used up and the iron keeps its electrons. The block needs replacing from time to time.

Check your answer. Zn and Al are lower than iron. Sn is higher and would make the iron the one that is oxidized.

Common mistake. Choosing the metal with the highest table value because it “resists” rust. The protector must be lower than iron.

Answer: Zn and Al protect iron. Sn does not. The block is the sacrificial anode and the pipe is the cathode. Zn: +0.31 V, Sn: −0.31 V

Question type

Name the electrodes for plating and for refining

Use this when: The question describes plating an object or refining a metal and asks for the anode, the cathode, the half-reaction or the power supply connection.

Example. A steel key is plated with copper from Cu²⁺(aq). Name the electrode for the key. Write the half-reaction there. Say which terminal of the power supply joins the key. Then impure copper is refined in the same kind of solution. Name the anode and the cathode.
  1. Name the electrode for the key.

    The object to plate collects the metal, so metal ions are reduced onto it. Reduction is at the cathode.

    the key is the cathode

  2. Write the half-reaction.

    Copper ions gain two electrons and become copper metal.

    Cu²⁺ + 2e⁻ → Cu

  3. Name the terminal.

    The cathode is joined to the negative terminal of the power supply.

    the key joins the negative terminal

  4. Name the refining electrodes.

    The impure copper dissolves, so it is oxidized. Pure copper collects on the other electrode.

    impure copper is the anode. pure copper collects at the cathode

  5. Write the anode half-reaction.

    Copper loses two electrons.

    Cu → Cu²⁺ + 2e⁻

Why this works. Every process follows one rule. Oxidation is at the anode and reduction is at the cathode. The object being plated is where metal ions are reduced, and the dissolving metal in refining is oxidized.

Check your answer. The two copper half-reactions are the reverse of each other: one at the key, one at the anode.

Common mistake. Joining the object to the positive terminal. The object that collects metal must be the cathode, so it joins the negative terminal.

Answer: The key is the cathode: Cu²⁺ + 2e⁻ → Cu, joined to the negative terminal. In refining the impure copper is the anode and pure copper collects at the cathode

Question type

Choose a battery using evidence beyond voltage

Use this when: The question gives two batteries with given data and a job, and asks which to choose and why.

Example. This data is supplied. Battery A has 4 primary cells of 1.50 V each and a mass of 90 g. Battery B has 5 rechargeable cells of 1.20 V each and a mass of 110 g. A device needs 6.0 V. It is used for a few minutes each week. Choose a battery and give one advantage and one limit. What should happen to the used battery?
  1. Find the voltage of each battery.

    Cells in a row add their voltages.

    A: 4 × 1.50 V = 6.00 V. B: 5 × 1.20 V = 6.00 V

  2. Compare them with the need.

    Both reach 6.0 V, so voltage does not decide.

    equal voltage

  3. Use the other evidence.

    Mass, lifetime, recharging and cost are separate evidence. A is lighter. B can be recharged.

    mass: A 90 g, B 110 g

  4. Match the job.

    The device is used rarely. A primary cell keeps its charge in storage and costs less to start.

    choose A

  5. State an advantage and a limit.

    Every choice has both.

    advantage: lighter and cheaper to start. limit: used once, so it becomes waste

  6. Plan the disposal.

    Used cells contain metals that can harm soil and water.

    collect for recycling

Why this works. The best cell depends on the job. Voltage is one piece of evidence. When two batteries match on voltage, the other evidence decides. A different job, such as daily use, could favour battery B.

Check your answer. Both batteries give 6.00 V, so the choice must come from evidence other than voltage.

Common mistake. Choosing the battery with the higher voltage when both are equal, or always choosing the rechargeable one. Match the job.

Answer: Both give 6.00 V. Choose battery A for rare use: lighter and cheaper to start, but used once. Recycle the used battery

Diploma-style questions

Try each question first. Then open the worked solution.

Multiple choice · outcome 30-B1.1k
How many grams of silver are deposited when a current of 1.50 A flows for 20.0 minutes through Ag⁺(aq)? Which method should be used first?
  1. A. Table values, to find E°reaction
  2. B. Faraday’s law, starting with the charge
  3. C. A titration, starting with the volumes
  4. D. Table values, then a titration
Show the worked solution (try the question first)
  1. Read what is given.

    A current and a time are given. The unknown is a mass at an electrode.

  2. Choose the method.

    This points to Faraday’s law.

    answer B

Why each choice is right or wrong

  • A. The question does not ask for a voltage or a direction. Table values would give a number, but not the mass.
  • B. Correct. A current and a time give the charge. Then moles of electrons, moles of silver and the mass follow.
  • C. There is no solution of known concentration being added to a sample. A titration does not apply.
  • D. Neither the table nor a titration is needed. What is given point to Faraday’s law only.

Answer: B

Numerical response · outcome 30-B1.2k
A current of 3.00 A runs for 15.0 min through Zn²⁺(aq). Zinc forms at the cathode. Use M(Zn) = 65.41 g/mol. Find the mass of zinc. Record your answer as 0.abc g. Enter the digits a, b and c.
Show the worked solution (try the question first)
  1. Convert the time.

    The ampere uses seconds.

    15.0 min × 60 = 900 s

  2. Find the charge.

    Charge is current times time.

    q = 3.00 A × 900 s = 2700 C

  3. Find the moles of electrons.

    Divide by 9.65 × 10⁴ C/mol. Keep one extra digit.

    n(e⁻) = 2700 ÷ (9.65 × 10⁴) = 0.02798 mol

  4. Use the half-reaction.

    Zn²⁺ + 2e⁻ → Zn gives 2 electrons for each zinc atom.

    n(Zn) = 0.02798 ÷ 2 = 0.01399 mol

  5. Find the mass.

    Multiply by the molar mass. Round the final answer to three significant digits.

    m = 0.01399 × 65.41 = 0.9151 g → 0.915 g

  6. Enter the digits.

    The value is 0.915, so a = 9, b = 1 and c = 5.

    record 9 1 5

Answer: 0.915 g. Record 9 1 5.

Numerical response · outcome 30-B2.8k
A 25.00 mL sample of Fe²⁺ solution needs 23.40 mL of 0.0200 mol/L MnO₄⁻ in acid. The balanced equation is MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Find the concentration of Fe²⁺. Record your answer as 0.0abc mol/L. Enter the digits a, b and c.
Show the worked solution (try the question first)
  1. Convert the volumes.

    Divide each volume in millilitres by 1000.

    23.40 mL = 0.02340 L. 25.00 mL = 0.02500 L

  2. Find the moles of MnO₄⁻.

    Amount equals concentration times volume.

    0.02340 × 0.0200 = 4.680 × 10⁻⁴ mol

  3. Use the ratio.

    One MnO₄⁻ reacts with five Fe²⁺.

    5 × 4.680 × 10⁻⁴ = 2.340 × 10⁻³ mol

  4. Divide by the sample volume.

    Round the final answer to three significant digits.

    2.340 × 10⁻³ ÷ 0.02500 = 0.09360 mol/L → 0.0936 mol/L

  5. Enter the digits.

    The value is 0.0936, so a = 9, b = 3 and c = 6.

    record 9 3 6

Answer: 0.0936 mol/L. Record 9 3 6.

Multiple choice · outcome 30-B1.2k
Table values: E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. A student writes the reaction Cu + Zn²⁺ → Cu²⁺ + Zn. Which statement is correct?
  1. A. It is a voltaic cell, and zinc is the anode.
  2. B. It is an electrolytic cell, copper is the anode, and the power supply must give more than 1.10 V.
  3. C. It is an electrolytic cell, copper is the cathode, and the power supply must give more than 1.10 V.
  4. D. It is a voltaic cell, and copper is the anode.
Show the worked solution (try the question first)
  1. Find what is reduced and oxidized.

    Cu goes from 0 to +2, so it is oxidized. Zn²⁺ goes to Zn, so it is reduced.

    anode Cu, cathode Zn

  2. Subtract.

    Table value of the particle reduced minus the table value of the particle oxidized.

    E°reaction = −0.76 V − (+0.34 V) = −1.10 V

  3. Read the sign.

    A negative value needs a power supply. It is an electrolytic cell, and the supply must give more than 1.10 V.

    answer B

Why each choice is right or wrong

  • A. E°reaction is negative, so the reaction does not run by itself. It is not voltaic. Zinc is also reduced here, so it is the cathode.
  • B. Correct. E°reaction = −1.10 V, so a power supply is needed. Copper is oxidized, so it is the anode.
  • C. The cell type is right, but copper is oxidized in this reaction. Oxidation is at the anode, so copper is the anode.
  • D. Copper is the anode, which is right. But E°reaction is negative, so the cell is electrolytic and not voltaic.

Answer: B