B16 · Unit B review: choose the method · Notes

Download the printable PDF

Goals: Choose the method a Unit B question needs. Use the table, Faraday’s law and a titration in turn. Explain corrosion protection, plating and bleaching with redox ideas.

Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.

Slide 1 of 8 · Sort the problem before you solve it

Key ideas

Choose the method before you touch a calculator. If the question asks about voltage, spontaneity or the anode, use the . If it gives current and time, or asks for a mass at an electrode, use .

If it asks for a concentration from the volume of a reactant, use a . What is given and the point you to the method.

A positive E°reaction means the reaction runs by itself, so it can be a cell. A negative E°reaction needs a power supply, so it is run as an cell.

In both cell types, happens at the anode and happens at the cathode. Electrode names follow the reaction, not the cell type.

Example

Each Unit B problem asks about a cell, a charge or a titration. Choose the method for each. (a) Find the voltage of a zinc and silver cell. (b) Find the mass of silver from 3.00 A for 25.0 min. (c) Find [Fe²⁺] from the volume of MnO₄⁻ solution needed.

Try it

Choose the method for each. (a) Find the mass of copper from 2.00 A for 10.0 min. (b) Find [Fe²⁺] from a permanganate titration. Then, for E°reaction = −0.50 V, name the cell type and the cathode reaction.

Slide 2 of 8 · Combine half-reactions

Key ideas

Aluminium has the E° (−1.66 V), so it is the anode and is oxidized: Al → Al³⁺ + . Silver is the cathode: Ag⁺ + e⁻ → Ag.

Each silver ion takes only 1 electron, so the silver half. Add the halves: Al + 3Ag⁺ → .

Check the balance. Al 1, Ag 3 and charge on each side. A balanced equation must match in atoms and in .

E°reaction = E°cathode − E°anode = 0.80 − (−1.66) = . Do not the silver value by three. A positive value means the reaction is spontaneous.

Example

Find the cell reaction and voltage for aluminium and silver half-cells at 1.0 mol/L. Given E°(Al³⁺/Al) = −1.66 V and E°(Ag⁺/Ag) = +0.80 V.

Try it

Find the cell reaction and voltage for aluminium and copper half-cells at 1.0 mol/L. Given E°(Al³⁺/Al) = −1.66 V and E°(Cu²⁺/Cu) = +0.34 V.

Slide 3 of 8 · From current and time to a mass

Key ideas

Current is charge per second. Change minutes to first. The charge is q = , where I is the current in amperes and t is the time in seconds.

Divide the charge by Faraday’s constant, C/mol e⁻, to get the moles of electrons. Here 4500 ÷ (9.65 × 10⁴) = mol.

The mole ratio comes from the half-reaction. Ag⁺ + e⁻ → Ag needs 1 mol of electrons per mole of metal, Cu²⁺ + 2e⁻ → Cu needs , and Al³⁺ + 3e⁻ → Al needs .

Mass = moles × molar mass. For silver, 0.04663 mol × 107.87 g/mol = . A wrong mole ratio makes the mass wrong by that same factor.

Example

A current of 3.00 A runs for 25.0 min in a cell with a silver cathode in Ag⁺ solution. Find the mass of silver deposited. Use F = 9.65 × 10⁴ C/mol e⁻ and M(Ag) = 107.87 g/mol.

Try it

A current of 2.50 A runs for 18.0 min in a cell with a copper cathode in Cu²⁺ solution. Find the mass of copper deposited. Use F = 9.65 × 10⁴ C/mol e⁻ and M(Cu) = 63.55 g/mol.

Slide 4 of 8 · Redox titration

Key ideas

A redox titration finds a concentration by reacting a sample with a solution of concentration. Permanganate is reduced: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + .

Iron(II) is oxidized: Fe²⁺ → Fe³⁺ + e⁻. Five iron(II) ions supply the five electrons that one permanganate needs, so the mole ratio is .

Change volumes to first: divide millilitres by 1000. So 20.00 mL is L and 25.00 mL is 0.02500 L. Then amount = concentration × volume.

The end point is the first . It shows all the iron(II) has reacted. The mole ratio comes from the of the balanced equation, not from 1 to 1.

Example

A 25.00 mL sample of iron(II) solution needs 20.00 mL of 0.0200 mol/L MnO₄⁻ solution in acid. Find [Fe²⁺]. Given MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O and Fe²⁺ → Fe³⁺ + e⁻.

Try it

A 20.00 mL sample of iron(II) solution needs 30.00 mL of 0.0100 mol/L MnO₄⁻ solution in acid. Find [Fe²⁺]. Use MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺.

Slide 5 of 8 · Method: how to choose the method

Key ideas

Step 1. Read what is and what is asked. Do this before you touch a calculator.

Step 2. Sort the problem. A voltage or direction uses the . Current and time use . A reacting volume uses a .

Step 3. Run that method’s steps. Use the matching method slide from this unit.

Step 4. Check the units and the digits. Round , at the end.

Example

Use the method on a 25.00 mL sample of iron(II) solution that needs 20.00 mL of 0.0200 mol/L MnO₄⁻ in acid. Find [Fe²⁺].

Try it

Use the method on 3.00 A for 10.0 minutes through Ag⁺(aq) with a silver cathode. M(Ag) = 107.87 g/mol. Choose the method and find the mass of silver.

Slide 6 of 8 · Your turn: choose, then solve

Key ideas

Name the method first. Cell A gives table values and asks for a voltage, so use the . Cell B gives current and time and asks for a mass, so use .

For cell A, zinc has the lower E° (−0.76 V), so zinc is the . Zinc gives 2 electrons and each silver ion takes 1, so the silver half.

Zn + 2Ag⁺ → Zn²⁺ + 2Ag. E°cell = 0.80 − (−0.76) = . This is positive, so the cell is . Do not double the silver value.

For cell B, 30.0 min × 60 = . Sodium ions are reduced at the cathode: Na⁺ + e⁻ → , a ratio of 1 to 1. Write the unit with each answer.

Example

Cell A is a zinc and silver cell: E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V. Cell B is molten NaCl with 2.00 A for 30.0 min. Choose the method for each. Find E°cell for cell A and the mass of sodium for cell B. Use F = 9.65 × 10⁴ C/mol e⁻ and M(Na) = 22.99 g/mol.

Try it

Cell C is an iron and silver cell: E°(Fe²⁺/Fe) = −0.45 V and E°(Ag⁺/Ag) = +0.80 V. Cell D is molten NaCl with 2.50 A for 20.0 min. Choose the method for each. Find E°cell for cell C and the mass of sodium for cell D. Use M(Na) = 22.99 g/mol.

Slide 7 of 8 · Corrosion, industry and batteries

Key ideas

Iron rusts because it is : Fe → Fe²⁺ + 2e⁻. A metal with a lower reduction value, like magnesium (−2.37 V), is a stronger than iron (−0.45 V).

Join magnesium to iron. The magnesium is the and is used up, so it is a sacrificial anode. The iron is protected as the .

In electroplating, the object to plate is the . In refining, the impure metal is the , so it dissolves, and pure metal collects at the cathode.

Every process follows one rule: at the anode and reduction at the . A good battery balances voltage, mass, cost, lifetime and disposal.

Example

A steel pipe in soil must be protected from rust. Given E°(Mg²⁺/Mg) = −2.37 V and E°(Fe²⁺/Fe) = −0.45 V, explain how a magnesium block protects the pipe. Name which metal is oxidized and which is the cathode.

Try it

Impure copper is refined by electrolysis. Name the electrode that is the impure copper. Write the half-reaction at each electrode.

Slide 8 of 8 · Redox in industry: bleaching and preserving

Key ideas

Industry bleaches with an agent. Pulp and paper mills use chlorine dioxide or hydrogen peroxide. Textile makers use hydrogen peroxide or hypochlorite.

The oxidizing agent oxidizes the coloured compounds, so they become .

A vat dye such as indigo is treated with a agent so that it dissolves. Oxygen in the air then it back to its colour.

Oxygen is an oxidizing agent. It browns cut fruit and makes fats rancid. An antioxidant such as vitamin C is a agent. It reacts with the first, so the food is protected.

Example

A pulp mill bleaches brown wood pulp with hydrogen peroxide. Name the oxidizing agent. Say what it changed and what was oxidized.

Try it

Vitamin C is added to cut apple slices so they do not turn brown. Is vitamin C an oxidizing agent or a reducing agent? Explain how it protects the apple.

Practice 1

Given the Data Booklet table values E°(Cu²⁺/Cu) = +0.34 V and E°(Mg²⁺/Mg) = −2.37 V, at 1.0 mol/L. Choose the method. Name the anode and find the voltage.

Practice 2

A current of 4.00 A runs for 20.0 min through Cu²⁺(aq) with a copper cathode. Find the mass of copper that forms. Use M(Cu) = 63.55 g/mol.

Practice 3

In acid, 20.00 mL of 0.0150 mol/L MnO₄⁻ reacts with 25.00 mL of an iron(II) solution. Find [Fe²⁺]. Use MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺.

Practice 4

A reaction has a calculated E°reaction of −0.50 V. What kind of cell can make it happen, and what does the cell need?

Practice 5

A steel pipe in soil must be protected from rust. Name one method. Say why it works, and say which electrode the pipe is.

Practice 6

A spoon is to be plated with silver from a silver nitrate solution. Which electrode is the spoon? Write the half-reaction there. Which terminal of the power supply is it joined to?

Practice 7

A mill bleaches wood pulp with hydrogen peroxide. What kind of agent is hydrogen peroxide here? What does it do to the coloured compounds?

Practice 8

Challenge: Given a zinc and copper voltaic cell that delivers 0.300 A for 2.00 hours. Data Booklet values: E°(Zn²⁺/Zn) = −0.76 V, E°(Cu²⁺/Cu) = +0.34 V and M(Zn) = 65.41 g/mol. This question needs two methods. Find E°cell in volts. Then find the mass of zinc that the anode loses, in grams. Use F = 9.65 × 10⁴ C/mol e⁻.