B12 · Worked examples

These questions use redox in the real world. You find which metal is oxidized, work out E°cell, choose how to protect iron, and describe what happens in plating, refining, electrowinning and aluminium production. E°cell is the cell voltage under standard conditions, the quantity earlier lessons called E°reaction. Standard conditions are 1.0 mol/L solutions, 25.00 °C (298.15 K) and 101.325 kPa. Table values come from the Data Booklet electrode table.

Open the B12 lesson · B12 slide notes

Worked question types

Each example shows every step, why you do it, and the idea behind it.

Question type

Treat rusting as a cell and find E°cell

Use this when: The question says a metal corrodes in damp air and gives the two half-reactions and table values. It asks for the net equation and E°cell.

Example. Iron in damp air has the oxidation Fe → Fe²⁺ + 2e⁻ and the reduction O₂ + 2H₂O + 4e⁻ → 4OH⁻. Table values: E°(O₂/OH⁻) = +0.40 V and E°(Fe²⁺/Fe) = −0.45 V. Write the net equation and find E°cell. Is rusting spontaneous?
  1. Name the roles.

    Iron loses electrons, so it is oxidized and is the anode. Oxygen gains them, so it is reduced at the cathode.

    anode: Fe cathode: O₂

  2. Match the electrons.

    The iron half has 2e⁻ and the oxygen half has 4e⁻. Multiply the iron half by 2.

    2Fe → 2Fe²⁺ + 4e⁻ O₂ + 2H₂O + 4e⁻ → 4OH⁻

  3. Add and cancel.

    The electrons cancel. Nothing else repeats on opposite sides.

    2Fe + O₂ + 2H₂O → 2Fe²⁺ + 4OH⁻

  4. Check atoms and charge.

    Both must match on the two sides.

    Fe 2, O 4, H 4 on each side. charge 0 = 0 ✓

  5. Subtract the table values.

    E°cell is the cathode value minus the anode value. The cathode is O₂/OH⁻ and the anode pair is Fe²⁺/Fe.

    E°cell = +0.40 − (−0.45) = +0.85 V

  6. Read the sign.

    A positive value means the reaction is spontaneous under standard conditions. Rusting needs both oxygen and water.

    spontaneous

Why this works. Rusting is a small voltaic cell. At one spot iron is oxidized. The electrons move through the iron to another spot, where oxygen and water take them. Water carries ions between the two spots.

Check your answer. The cathode value is the higher one, +0.40 V, and the anode value is the lower one, −0.45 V. Cathode minus anode is positive.

Common mistake. Flipping the sign or adding the two numbers. Always take cathode minus anode.

Answer: 2Fe + O₂ + 2H₂O → 2Fe²⁺ + 4OH⁻, E°cell = +0.85 V, spontaneous

Question type

Decide whether a metal corrodes in damp air

Use this when: The question names a metal and gives table values. It asks if the metal is oxidized by oxygen and water.

Example. In damp air the reduction is O₂ + 2H₂O + 4e⁻ → 4OH⁻. Table values: E°(O₂/OH⁻) = +0.40 V, E°(Ni²⁺/Ni) = −0.26 V and E°(Ag⁺/Ag) = +0.80 V. For nickel and for silver, find E°cell and decide if corrosion is spontaneous.
  1. Choose the roles.

    The metal is the anode and is oxidized. Oxygen is the cathode. The cathode pair is always O₂/OH⁻ here.

    cathode: O₂/OH⁻ anode: the metal

  2. Subtract for nickel.

    Cathode minus anode.

    E°cell = +0.40 − (−0.26) = +0.66 V

  3. Subtract for silver.

    Cathode minus anode.

    E°cell = +0.40 − (+0.80) = −0.40 V

  4. Read the signs.

    A positive value means the reaction is spontaneous. A negative value means the reverse is spontaneous.

    nickel +0.66 V: spontaneous silver −0.40 V: not spontaneous

  5. Say what the sign does not tell you.

    The sign gives direction. It does not say how fast the metal corrodes.

    direction only

Why this works. A metal is oxidized by oxygen and water when its table value is below +0.40 V, the value for O₂/OH⁻. Then the cathode value minus the anode value is positive.

Check your answer. Nickel is far below +0.40 V and silver is above it. The signs match that.

Common mistake. Taking the larger number minus the smaller number every time. This hides which species is the anode.

Answer: Nickel: E°cell = +0.66 V, spontaneous. Silver: E°cell = −0.40 V, not spontaneous

Question type

Predict which metal corrodes at a scratch in plating

Use this when: The question gives steel with a metal plating that is scratched in water. It asks which metal corrodes.

Example. A steel object is plated with nickel. A second steel object is plated with chromium. Both are scratched down to the iron and sit in damp air. Table values: E°(Ni²⁺/Ni) = −0.26 V, E°(Fe²⁺/Fe) = −0.45 V and E°(Cr²⁺/Cr) = −0.91 V. Which metal corrodes in each?
  1. Say what a scratch does.

    The plating metal and the iron now touch in water. Water and oxygen can reach both. The two metals compete to give up electrons.

    two metals in contact

  2. Use the rule.

    The metal lower on the table is the stronger reducing agent, so it is oxidized first.

    lower value = oxidized first

  3. Compare iron and nickel.

    The value −0.45 V is lower than −0.26 V, so iron is the stronger reducing agent.

    −0.45 < −0.26: iron corrodes under nickel

  4. Compare iron and chromium.

    Chromium has the lower value, so chromium is the stronger reducing agent.

    −0.91 < −0.45: chromium corrodes and the iron is protected

  5. Contrast with paint.

    Paint gives no electrons and takes no part in the redox. It only blocks water and oxygen, and it fails the same way at a scratch.

    paint: a barrier only

Why this works. At a scratch, the stronger reducing agent is oxidized. If the plating is the stronger reducing agent, it protects the iron by being used up. If the iron is the stronger reducing agent, the plating makes the iron rust faster at the scratch.

Check your answer. A metal below iron on the table protects it. Chromium is below iron. Nickel is above iron.

Common mistake. Choosing the metal with the higher value as the one that corrodes. The lower value corrodes.

Answer: Nickel plate: the iron corrodes at the scratch. Chromium plate: the chromium corrodes and the iron is protected

Question type

Choose a sacrificial anode by comparing table values

Use this when: The question gives a protected metal and candidate metals with table values. It asks which could protect the metal.

Example. A buried steel tank must be protected with a sacrificial anode. Table values: E°(Fe²⁺/Fe) = −0.45 V, E°(Al³⁺/Al) = −1.66 V, E°(Zn²⁺/Zn) = −0.76 V, E°(Cd²⁺/Cd) = −0.40 V and E°(Ag⁺/Ag) = +0.80 V. Which metals could protect it? Which one gives the larger comparison value?
  1. Say what the anode must do.

    Use Method: how to choose a corrosion protection. A sacrificial anode must give up electrons more easily than iron. It must be a stronger reducing agent than iron.

    its table value must be below −0.45 V

  2. Sort the candidates.

    Compare each value with −0.45 V.

    below: Al (−1.66), Zn (−0.76). above: Cd (−0.40), Ag (+0.80)

  3. Find protected minus sacrificial for each.

    This is a comparison value, not a cell voltage. Keep the order protected minus sacrificial.

    Al: −0.45 − (−1.66) = +1.21 V Zn: −0.45 − (−0.76) = +0.31 V Cd: −0.45 − (−0.40) = −0.05 V Ag: −0.45 − (+0.80) = −1.25 V

  4. Read the signs.

    A positive value means the candidate is the stronger reducing agent, so it works. A negative value means it fails.

    Al and Zn work. Cd and Ag fail

  5. Pick the larger value.

    Aluminium gives the larger value, so it is the stronger reducing agent. That alone does not make it the best choice, because the table does not show cost or lifetime.

    Al +1.21 V > Zn +0.31 V

Why this works. A sacrificial anode is oxidized instead of the iron, so the iron stays the cathode. The anode must be a stronger reducing agent than iron. Subtracting in the order protected minus sacrificial gives a positive value when it is.

Check your answer. Only the two values below −0.45 V give a positive comparison. Cadmium is close to iron, so its value is only slightly negative.

Common mistake. Flipping the subtraction. Then the metals that fail look like they work.

Answer: Al and Zn could protect the tank. Comparison values: Al +1.21 V, Zn +0.31 V, Cd −0.05 V, Ag −1.25 V

Question type

Tell the comparison value from the real cell voltage

Use this when: The question asks for E°cell of a sacrificial anode system or for what is needed for it to work.

Example. A steel pipe in wet soil is joined to an aluminium block by a wire. Table values: E°(O₂/OH⁻) = +0.40 V, E°(Fe²⁺/Fe) = −0.45 V and E°(Al³⁺/Al) = −1.66 V. Find the comparison value, protected minus sacrificial. Find E°cell of the real cell. State what must be present for the system to work.
  1. Find the comparison value.

    Subtract in the order protected minus sacrificial. This only compares the two metals.

    −0.45 − (−1.66) = +1.21 V

  2. Find the real cell reaction.

    In the real cell oxygen is reduced at the cathode. The aluminium is oxidized at the anode.

    cathode: O₂ + 2H₂O + 4e⁻ → 4OH⁻ anode: Al → Al³⁺ + 3e⁻

  3. Find E°cell.

    Cathode minus anode.

    E°cell = +0.40 − (−1.66) = +2.06 V

  4. List what must be present.

    Electrons need a path, so the block must touch the iron or be wired to it. Ions need a path, so an electrolyte such as wet soil must be present.

    a connection and an electrolyte

  5. Say what happens over time.

    The block is oxidized and its atoms leave as ions. It shrinks, so it must be replaced.

    replace the block when it is used up

Why this works. The comparison value tells you which metal is the stronger reducing agent. The real cell voltage uses the reduction that actually happens, which is oxygen. A loose block nearby does nothing, because no electrons can flow.

Check your answer. Both values are positive. The real cell value is larger because O₂/OH⁻ is higher on the table than Fe²⁺/Fe.

Common mistake. Reporting the comparison value as E°cell. The real cell has oxygen at the cathode.

Answer: Comparison value +1.21 V. E°cell +2.06 V. The block must touch or be wired to the iron and sit in an electrolyte

Question type

Predict which metal corrodes when two metals are joined

Use this when: The question gives two metals in contact in an electrolyte, with table values. It asks which metal corrodes.

Example. In sea water, a steel bolt is joined to a copper plate. A second steel bolt is joined to a zinc plate. Table values: E°(Cu²⁺/Cu) = +0.34 V, E°(Fe²⁺/Fe) = −0.45 V and E°(Zn²⁺/Zn) = −0.76 V. Which metal corrodes in each pair?
  1. State the rule.

    In a pair of metals in an electrolyte, the lower table value is oxidized. It is the anode.

    lower value = anode

  2. Compare iron and copper.

    Iron has the lower value.

    −0.45 < +0.34: iron is the anode and corrodes faster

  3. Compare iron and zinc.

    Zinc has the lower value.

    −0.76 < −0.45: zinc is the anode and the iron is protected

  4. Say what joining does.

    Joining makes the electrons travel through the metal contact. The stronger reducing agent is used up and the other metal is the cathode.

    the cathode is not oxidized

Why this works. Two joined metals in an electrolyte form a cell. The stronger reducing agent is the anode and the other metal is the cathode. A metal higher than iron does not protect it. It speeds up the rusting.

Check your answer. Copper is far above iron, so copper is the wrong partner. Zinc is below iron, so zinc is a good partner.

Common mistake. Assuming any metal joined to iron will protect it. The partner must be lower on the table.

Answer: Copper plate: the steel bolt corrodes. Zinc plate: the zinc corrodes and the steel bolt is protected

Question type

Explain protection with a power supply

Use this when: The question describes an underground pipe protected by a power supply and asks which terminal is used, where oxidation happens and how it differs from a sacrificial anode.

Example. An underground steel pipeline is protected by a power supply and an inert buried anode. Which terminal is the pipeline joined to? Where does oxidation happen? Give one difference between this method and a sacrificial anode.
  1. Choose the terminal for the pipeline.

    The protected metal always goes on the negative terminal. The supply pushes electrons onto it.

    pipeline on the negative terminal

  2. Name the electrode type.

    The pipeline is where reduction happens. That makes it the cathode of an electrolytic cell, a cell that uses electrical energy to force a reaction.

    pipeline = cathode

  3. Place the anode.

    The inert anode goes on the positive terminal. Oxidation happens there, so the iron is not oxidized.

    inert anode on the positive terminal

  4. Compare the two methods.

    Both keep the iron as the cathode. A sacrificial anode is a spontaneous cell and needs no electricity, but the blocks must be replaced. A power supply needs electricity and regular checking.

    sacrificial: spontaneous power supply: electrical energy

Why this works. Oxidation does not happen at the cathode. Both methods work by keeping the iron as the cathode. They differ in where the electrons come from.

Check your answer. The iron is on the negative terminal. The positive terminal would make the iron the anode and speed up rusting.

Common mistake. Joining the pipeline to the positive terminal. The protected metal goes on the negative terminal.

Answer: The pipeline is joined to the negative terminal. Oxidation happens at the inert anode. A power supply needs electricity, but a sacrificial anode does not

Question type

Describe an electroplating cell and find the mass plated

Use this when: The question names an object to plate and a plating metal. It asks for the electrodes, the half-reactions and sometimes the mass plated.

Example. A steel key is nickel plated in a solution of Ni²⁺. The anode is a bar of nickel. A steady 2.00 A runs for 40.0 minutes. The molar mass of nickel is 58.69 g/mol. Name the cathode and the anode, write both half-reactions and find the mass of nickel plated.
  1. Name the purpose and the cathode.

    The purpose is to coat the key. The object to be coated is always the cathode, because metal ions are reduced there.

    cathode: the steel key

  2. Write the cathode half-reaction.

    Ni²⁺ ions gain electrons and become a coating of nickel.

    Ni²⁺ + 2e⁻ → Ni

  3. Write the anode half-reaction.

    The anode is a bar of the plating metal. It dissolves and keeps the solution supplied with Ni²⁺.

    Ni → Ni²⁺ + 2e⁻

  4. Find the charge.

    Change 40.0 min to 2400 s. Charge equals current times time.

    q = 2.00 × 2400 = 4800 C

  5. Find the moles of electrons and of nickel.

    Divide by F. Then divide by 2 from the half-reaction.

    n(e⁻) = 4800 ÷ (9.65 × 10⁴) = 0.04974 mol n(Ni) = 0.04974 ÷ 2 = 0.02487 mol

  6. Find the mass.

    Multiply by the molar mass. Round the final answer to three significant digits.

    m = 0.02487 × 58.69 = 1.460 g → 1.46 g

Why this works. In plating, metal moves from the anode to the object. The object is the cathode. The Faraday chain from B10 links the charge to the mass plated, so you can predict the coating for the charge used.

Check your answer. The same half-reaction is run in both directions. Ni²⁺ is made at the anode and used up at the cathode.

Common mistake. Putting the object on the anode. The object to be coated is always the cathode.

Answer: Cathode: the key, Ni²⁺ + 2e⁻ → Ni. Anode: the nickel bar, Ni → Ni²⁺ + 2e⁻. Mass plated: 1.46 g

Question type

Describe refining and sort the impurities

Use this when: The question describes impure copper being refined and gives impurity metals with table values. It asks what each metal does.

Example. Impure copper is the anode in a refining cell. It contains silver, gold, zinc, iron and nickel. Table values: E°(Cu²⁺/Cu) = +0.34 V, E°(Ag⁺/Ag) = +0.80 V, E°(Au³⁺/Au) = +1.50 V, E°(Zn²⁺/Zn) = −0.76 V, E°(Fe²⁺/Fe) = −0.45 V and E°(Ni²⁺/Ni) = −0.26 V. Write the electrode half-reactions and say what happens to each impurity.
  1. Name the purpose and the electrodes.

    Refining makes an impure metal purer. The impure copper is the anode. The cathode is a thin sheet of pure copper.

    anode: impure Cu cathode: pure Cu

  2. Write the half-reactions.

    Copper dissolves at the anode. Copper ions are reduced at the cathode.

    Anode: Cu → Cu²⁺ + 2e⁻ Cathode: Cu²⁺ + 2e⁻ → Cu

  3. Find the metals above copper.

    A metal above copper is a weaker reducing agent, so it is not oxidized at this anode. It falls off as sludge.

    above +0.34 V: Ag (+0.80), Au (+1.50) → sludge

  4. Find the metals below copper.

    A metal below copper is a stronger reducing agent, so it is oxidized and its ions stay dissolved in the solution.

    below +0.34 V: Zn (−0.76), Fe (−0.45), Ni (−0.26) → dissolved ions

  5. Say where the pure copper comes from.

    Copper moves from the impure anode to the pure cathode. The impurities stay behind.

    purpose: a purer metal

Why this works. The anode loses copper, and the cathode gains copper. A metal above copper is a weaker reducing agent and falls off as sludge. A metal below copper is a stronger reducing agent and stays dissolved as ions.

Check your answer. The sludge metals are the two highest in the list. The dissolved metals are the three lowest.

Common mistake. Saying that metals below copper become sludge. Metals above copper fall off as sludge. Metals below copper stay dissolved.

Answer: Anode: Cu → Cu²⁺ + 2e⁻. Cathode: Cu²⁺ + 2e⁻ → Cu. Ag and Au form sludge. Zn, Fe and Ni stay dissolved

Question type

Decide what is reduced at the cathode in electrowinning

Use this when: The question gives a water solution of metal ions with inert electrodes and asks if the metal forms at the cathode.

Example. A solution of Ni²⁺ in water is electrolyzed with inert electrodes to recover nickel. Table values: E°(Ni²⁺/Ni) = −0.26 V, E°(H₂O/H₂) = −0.83 V. A second solution contains Al³⁺ and has E°(Al³⁺/Al) = −1.66 V. In each, which species is reduced at the cathode? Does the anode dissolve?
  1. List what could be reduced.

    In a water solution the metal ion and water can both gain electrons at the cathode.

    Ni²⁺ or H₂O

  2. Compare the values.

    The species with the higher value is reduced first.

    −0.26 > −0.83: Ni²⁺ is reduced, so nickel forms

  3. Repeat for aluminium.

    Compare Al³⁺ with water.

    −1.66 < −0.83: water is reduced and hydrogen forms, not aluminium

  4. Write the nickel half-reaction.

    Use the species from the table.

    Ni²⁺ + 2e⁻ → Ni

  5. Decide about the anode.

    In electrowinning the anode is inert, which means it does not dissolve. The metal comes from the solution, not from the anode.

    inert anode

Why this works. Electrowinning recovers a metal from its ions. The metal ion must be reduced before water is. That works when its table value is above −0.83 V.

Check your answer. Nickel is above water on the table. Aluminium is below water, so water gets in the way.

Common mistake. Saying the anode dissolves in electrowinning. That is refining or plating. In electrowinning the anode is inert.

Answer: Ni²⁺ is reduced and nickel forms, with an inert anode. In the Al³⁺ solution, water is reduced and hydrogen forms

Question type

Explain why aluminium is made from a melt, and find the charge needed

Use this when: The question asks why aluminium cannot come from a water solution, what happens in a molten cryolite cell, or how much electricity is needed.

Example. Aluminium is made by electrolysis of Al₂O₃ dissolved in molten cryolite. Table values: E°(Al³⁺/Al) = −1.66 V, E°(H₂O/H₂) = −0.83 V and E°(Na⁺/Na) = −2.71 V. Explain why a water solution fails and why the melt works. Then find the moles of electrons and the charge needed for 1.00 × 10³ g of aluminium. The molar mass of aluminium is 26.98 g/mol.
  1. Test a water solution.

    Water and Al³⁺ can both be reduced. The higher value is reduced first.

    −0.83 > −1.66: water is reduced and hydrogen forms

  2. Explain the melt.

    Molten cryolite holds no water. The ions are Al³⁺ and Na⁺, and Al³⁺ has the higher value, so it is reduced.

    −1.66 > −2.71: Al³⁺ + 3e⁻ → Al

  3. Name the anode.

    Oxide ions are oxidized at a carbon anode. The oxygen reacts with the carbon, so the anode is used up.

    carbon anode wears away

  4. Find the moles of aluminium.

    Divide the mass by the molar mass.

    n(Al) = 1000 ÷ 26.98 = 37.06 mol

  5. Find the moles of electrons.

    Al³⁺ + 3e⁻ → Al needs 3 electrons per atom. Multiply by 3.

    n(e⁻) = 3 × 37.06 = 111.2 mol → 111 mol

  6. Find the charge.

    Multiply by F. Round the final answer to three significant digits.

    q = 111.2 × (9.65 × 10⁴) = 1.073 × 10⁷ C → 1.07 × 10⁷ C

Why this works. Water has a higher table value than Al³⁺, so in a solution water wins. A melt with no water removes the competitor. The huge charge shows why the process needs so much electrical energy.

Check your answer. A mass near 1000 g of a light metal is about 37 mol. Three electrons each gives about 111 mol of electrons, which is about 1.1 × 10⁷ C.

Common mistake. Claiming that Al³⁺ is reduced in water because it is a metal ion. Water has the higher value, so water is reduced.

Answer: Water is reduced in a solution. In the melt, Al³⁺ is reduced. n(e⁻) = 111 mol and q = 1.07 × 10⁷ C

Question type

Follow the electrons in a respiration-type reaction

Use this when: The question gives a reaction of a fuel with oxygen and asks what is oxidized, what is reduced and how many electrons move.

Example. Ethanol, C₂H₅OH, burns in oxygen: C₂H₅OH + 3O₂ → 2CO₂ + 3H₂O. Use oxidation numbers. An oxidation number is the charge an atom would have if shared electrons went to the atom that attracts them more. Find what is oxidized, what is reduced, and the electrons lost and gained.
  1. Find the oxidation number of C in ethanol.

    H is +1 and O is −2. The numbers must add to 0. This gives an average for the two carbon atoms.

    2C + 6(+1) + (−2) = 0, so C = −2

  2. Find C in CO₂.

    O is −2 and the numbers add to 0.

    C + 2(−2) = 0, so C = +4

  3. Find the change in oxygen.

    O₂ is an element, so O is 0. In CO₂ and H₂O it is −2.

    O: 0 → −2

  4. Count the electrons lost.

    Each carbon rises from −2 to +4, a change of 6. There are 2 carbon atoms.

    2 × 6 = 12 electrons lost

  5. Count the electrons gained.

    3O₂ has 6 oxygen atoms. Each gains 2 electrons.

    6 × 2 = 12 electrons gained

  6. Name the agents.

    The species that is oxidized is the reducing agent. The species that is reduced is the oxidizing agent.

    oxidized: carbon in ethanol (reducing agent). reduced: O₂ (oxidizing agent)

Why this works. Electrons lost equal electrons gained in every redox reaction. Oxidation numbers let you count them, even for an organic molecule, if you use the average for carbon.

Check your answer. The electrons lost and gained match at 12 each.

Common mistake. Counting only one carbon atom. Multiply the change per atom by the number of atoms.

Answer: Carbon in ethanol is oxidized (−2 to +4). O₂ is reduced (0 to −2). 12 electrons are lost and 12 are gained

Question type

Compare photosynthesis with respiration using oxidation numbers

Use this when: The question gives photosynthesis and asks what is oxidized and reduced, and how it compares with respiration.

Example. Photosynthesis is 6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂. Use oxidation numbers to say what is reduced and what is oxidized. Count the electrons gained and lost. Say why light energy is needed.
  1. Find carbon in CO₂ and in glucose.

    In CO₂, C is +4. In glucose H is +1 and O is −2, so the average for C is 0.

    C: +4 → 0

  2. Say what that means.

    The oxidation number falls, so carbon is reduced and CO₂ is the species reduced.

    CO₂ is reduced

  3. Count the electrons gained.

    Six carbon atoms each fall by 4.

    6 × 4 = 24 electrons gained

  4. Find the change in oxygen.

    Oxygen rises from −2 to 0 as O₂ forms. The O₂ comes from water, so water is oxidized. Six O₂ hold 12 oxygen atoms, and each rises by 2.

    O: −2 → 0, 12 × 2 = 24 electrons lost

  5. Compare with respiration.

    Respiration is the reverse and is spontaneous, so it gives off energy, like a voltaic cell. Photosynthesis is not spontaneous by itself.

    photosynthesis needs light energy, like an electrolytic cell needs a power supply

Why this works. Photosynthesis is the reverse of respiration. Carbon is reduced and water is oxidized, and the electrons gained equal the electrons lost. The reaction does not run by itself, so it needs light energy.

Check your answer. The electrons gained and lost match at 24 each.

Common mistake. Saying carbon is oxidized because it ends up in a larger molecule. Carbon falls from +4 to 0, so it is reduced.

Answer: CO₂ is reduced (+4 to 0, 24 electrons gained). Water is oxidized (oxygen −2 to 0, 24 electrons lost). Light energy is needed

Diploma-style questions

Try each question first. Then open the worked solution.

Multiple choice · outcome 30-B2.2s
A buried steel pipe is to be protected with a sacrificial anode. Table values: E°(Fe²⁺/Fe) = −0.45 V, E°(Cd²⁺/Cd) = −0.40 V, E°(Zn²⁺/Zn) = −0.76 V, E°(Ni²⁺/Ni) = −0.26 V and E°(Cu²⁺/Cu) = +0.34 V. Which metal could be used as the anode?
  1. A. cadmium, Cd
  2. B. zinc, Zn
  3. C. nickel, Ni
  4. D. copper, Cu
Show the worked solution (try the question first)
  1. State the rule.

    A sacrificial anode must be a stronger reducing agent than iron, so its table value must be below −0.45 V.

    below −0.45 V

  2. Find protected minus sacrificial.

    Keep the order. A positive value means the metal works.

    A: −0.05 V B: +0.31 V C: −0.19 V D: −0.79 V

  3. Choose the positive one.

    Only zinc gives a positive value.

    answer B

Why each choice is right or wrong

  • A. Cadmium has −0.40 V, which is above −0.45 V. Protected minus sacrificial is −0.45 − (−0.40) = −0.05 V. It is a weaker reducing agent than iron.
  • B. Correct. Zinc has −0.76 V, which is below −0.45 V. Protected minus sacrificial is −0.45 − (−0.76) = +0.31 V.
  • C. Nickel has −0.26 V, which is above −0.45 V. Protected minus sacrificial is −0.45 − (−0.26) = −0.19 V. Iron would corrode first.
  • D. Copper has +0.34 V, which is far above −0.45 V. Protected minus sacrificial is −0.45 − (+0.34) = −0.79 V. Joining copper makes the iron corrode faster.

Answer: B

Numerical response · outcome 30-B1.4k
A zinc roof corrodes in damp air. The reduction is O₂ + 2H₂O + 4e⁻ → 4OH⁻ and the oxidation is Zn → Zn²⁺ + 2e⁻. Table values: E°(O₂/OH⁻) = +0.40 V and E°(Zn²⁺/Zn) = −0.76 V. Find E°cell. Record your answer as a.bc V. Enter the digits a, b and c.
Show the worked solution (try the question first)
  1. Name the roles.

    Oxygen is reduced at the cathode. Zinc is oxidized at the anode.

    cathode: O₂/OH⁻ anode: Zn²⁺/Zn

  2. Subtract.

    E°cell is the cathode value minus the anode value. Do not multiply by the coefficients.

    E°cell = +0.40 − (−0.76) = +1.16 V

  3. Enter the digits.

    The value is 1.16, so a = 1, b = 1 and c = 6.

    record 1 1 6

Answer: +1.16 V. Record 1 1 6.

Multiple choice · outcome 30-B2.3s
Nickel is recovered by electrowinning from a water solution of Ni²⁺ with inert electrodes. Table values: E°(Ni²⁺/Ni) = −0.26 V and E°(H₂O/H₂) = −0.83 V. Which statement is correct?
  1. A. Nickel dissolves from the anode, and nickel plates on the cathode.
  2. B. Ni²⁺ is reduced at the cathode, the anode is inert, and the nickel comes from the solution.
  3. C. Water is reduced at the cathode, because −0.83 V is higher than −0.26 V.
  4. D. Nickel forms at the anode, where Ni²⁺ is oxidized.
Show the worked solution (try the question first)
  1. List what could be reduced.

    Ni²⁺ and water can both gain electrons at the cathode.

    Ni²⁺ or H₂O

  2. Compare the values.

    The higher value is reduced first.

    −0.26 > −0.83, so Ni²⁺ is reduced

  3. Name the anode.

    In electrowinning the anode is inert, so it does not dissolve.

    answer B

Why each choice is right or wrong

  • A. This describes refining or plating. In electrowinning the anode is inert, so it does not supply nickel.
  • B. Correct. Ni²⁺ has the higher value, so it is reduced. The anode does not dissolve, so the nickel comes from the solution.
  • C. The comparison is reversed. The value −0.26 V is higher than −0.83 V, so Ni²⁺ is reduced before water.
  • D. Reduction happens at the cathode, not the anode. Nickel metal forms where Ni²⁺ gains electrons.

Answer: B

Numerical response · outcome 30-B1.1s
Methane burns in oxygen: CH₄ + 2O₂ → CO₂ + 2H₂O. Use oxidation numbers, with H as +1 and O as −2 in the compounds. How many electrons are lost by the carbon in one CH₄? Record your answer as a whole number.
Show the worked solution (try the question first)
  1. Find C in CH₄.

    H is +1. The numbers add to 0.

    C + 4(+1) = 0, so C = −4

  2. Find C in CO₂.

    O is −2. The numbers add to 0.

    C + 2(−2) = 0, so C = +4

  3. Find the change.

    Subtract the starting number from the final number. One carbon atom is involved.

    +4 − (−4) = 8

  4. Check with oxygen.

    Two O₂ have 4 oxygen atoms. Each gains 2 electrons.

    4 × 2 = 8 electrons gained ✓

Answer: 8 electrons. Record 8.