B12 · Industrial applications and corrosion protection · Notes
Download the printable PDF
Goals: Explain rusting as a redox cell and calculate E°cell for it. Choose and explain barrier, sacrificial and power-supply protection using the table. Describe electroplating, refining, electrowinning and aluminium production, and judge claims with evidence. Identify the electron transfer in cellular respiration and photosynthesis.
Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.
Slide 1 of 9 · Rusting is a tiny cell
Key ideas
Corrosion is a metal slowly wearing away by redox. Rusting needs both and .
At one spot iron is oxidized: Fe → Fe²⁺ + . The electrons move through the iron to another spot, where O₂ + 2H₂O + 4e⁻ → .
E°cell is the cell voltage at standard conditions: solutions, and 101.325 kPa for gases.
E°cell = E°cathode − E°anode = 0.40 − (−0.45) = . A positive value means the reaction is .
Example
Iron rusts in damp air. Write the oxidation and reduction half-reactions and the cell reaction, then calculate E°cell. Use E°(O₂/OH⁻) = +0.40 V and E°(Fe²⁺/Fe) = −0.45 V.
Try it
Zinc also corrodes in damp air. Write the cell reaction for zinc and oxygen, then calculate E°cell. Use E°(O₂/OH⁻) = +0.40 V and E°(Zn²⁺/Zn) = −0.76 V.
Slide 2 of 9 · Barriers and what happens at a scratch
Key ideas
A , such as paint, keeps water and oxygen off the iron. A barrier does not supply .
A barrier protects only while it is whole. At a scratch, bare iron meets water and oxygen, and rust can creep the paint.
When two metals touch in water, the metal on the table is the stronger reducing agent and is oxidized first.
Tin (−0.14 V) is above iron (−0.45 V), so at a scratch the corrodes. Zinc (−0.76 V) is below iron, so the corrodes and the iron is protected.
Example
A steel can is coated with tin. The scratch exposes the iron. E°(Sn²⁺/Sn) = −0.14 V and E°(Fe²⁺/Fe) = −0.45 V. Which metal corrodes at the scratch, and why?
Try it
A steel sheet is coated with zinc. The scratch exposes the iron. E°(Zn²⁺/Zn) = −0.76 V and E°(Fe²⁺/Fe) = −0.45 V. Which metal corrodes at the scratch, and why?
Slide 3 of 9 · A sacrificial metal
Key ideas
A sacrificial anode is a block of metal that gives up electrons than iron. Choose a metal iron on the table.
The block is the anode and is . The iron is the , so it is not oxidized.
Protected minus sacrificial: −0.45 − (−2.37) = . A positive value means the block is the stronger .
In the real cell oxygen is reduced, so E°cell = 0.40 − (−2.37) = . The block needs a to the iron and an electrolyte.
Example
A magnesium block (E°(Mg²⁺/Mg) = −2.37 V) is joined to iron (E°(Fe²⁺/Fe) = −0.45 V) in wet soil. Find protected minus sacrificial, and then E°cell using O₂/OH⁻ at +0.40 V. Which metal is the anode?
Try it
An aluminium block (E°(Al³⁺/Al) = −1.66 V) is joined to iron (E°(Fe²⁺/Fe) = −0.45 V) in wet soil. Find protected minus sacrificial, and then E°cell using O₂/OH⁻ at +0.40 V.
Slide 4 of 9 · Protection with a power supply
Key ideas
A power supply pushes around a circuit. Join the iron to the terminal.
Electrons are pushed onto the iron, so it is the of an electrolytic cell. Oxidation does not happen at the cathode.
A separate anode is joined to the positive terminal. Oxidation happens there instead of at the iron.
A sacrificial anode uses a cell and needs no electricity. A power supply uses .
Example
A buried steel pipeline is protected by a power supply and an inert anode. To which terminal is the pipeline joined, what is it called, and why does it not rust?
Try it
Compare a sacrificial anode with a power supply. Which one needs electricity, and which one needs blocks to be replaced?
Slide 5 of 9 · Method: how to choose a corrosion protection
Key ideas
Step 1. Name the metal to protect and find its in the table.
Step 2. it with each metal you could use.
Step 3. A metal with a E° can be a sacrificial anode. It is oxidized instead.
Step 4. Check what the method needs. A works only while whole. A sacrificial anode needs a connection and an .
Step 5. With a power supply, join the protected metal to the terminal.
Check: the protected metal is always the .
Example
Use the method on an iron pipe in wet soil. E°(Mg²⁺/Mg) = −2.37 V and E°(Fe²⁺/Fe) = −0.45 V. Is magnesium a good sacrificial anode?
Try it
Use the method on a steel hull. To choose from: Zn (−0.76 V) and Cu (+0.34 V). Fe²⁺/Fe is −0.45 V. Which metal is a sacrificial anode?
Slide 6 of 9 · Your turn: protecting a buried tank
Key ideas
A metal protects iron when its E° is than −0.45 V. It is the stronger , so it is oxidized first.
Protected minus sacrificial: −0.45 − (−0.76) = for zinc. This is a comparison value, not a .
A positive value means the metal . A negative value, like −0.32 V for lead, means it .
Magnesium (+1.92 V) is the stronger reducing agent but is used up . Voltage cannot show cost, life or .
Example
A buried steel tank has E°(Fe²⁺/Fe) = −0.45 V. The metals to choose from for a sacrificial anode are Mg (−2.37 V), Zn (−0.76 V), Pb (−0.13 V) and Cu (+0.34 V). Which could protect it, and which is the best choice?
Try it
A steel pipe has E°(Fe²⁺/Fe) = −0.45 V. The metals to choose from for a sacrificial anode are Al (−1.66 V), Ni (−0.26 V) and Sn (−0.14 V). Which could protect it? Show protected minus sacrificial for each.
Slide 7 of 9 · Plating, refining and winning metal
Key ideas
Electroplating coats an object with a thin layer of metal. The object is the , where Ag⁺ + e⁻ → .
Refining makes an impure metal purer. The impure copper is the and dissolves: Cu → Cu²⁺ + . Pure copper builds up on the cathode.
Electrowinning recovers a metal from a solution of its ions: Zn²⁺ + 2e⁻ → Zn. The anode is , so the metal comes from the .
For each process, name the first, then say which electrode dissolves and which gains metal. The Faraday chain predicts the of metal formed.
Example
A spoon is silver plated in a solution of Ag⁺ ions. What is the purpose, which electrode is the spoon, and what are the half-reactions? The anode is a bar of silver.
Try it
Impure copper is refined in a copper(II) sulfate solution. What is the purpose, which electrode is the impure copper, and what are the half-reactions?
Slide 8 of 9 · Aluminium from a melt
Key ideas
In a water solution of Al³⁺, the cathode choices are Al³⁺ at and water at −0.83 V. The value is reduced first, so water is reduced.
Hydrogen gas forms at the cathode and no forms. So aluminium cannot be made from a water solution.
Instead, aluminium oxide is dissolved in , which has no water. Al³⁺ (−1.66 V) is higher than Na⁺ (−2.71 V), so Al³⁺ + → Al.
Oxide ions are oxidized at a anode, and the oxygen reacts with the carbon, so the anode is used up. The process needs a huge amount of .
Example
Could aluminium be made by electrolyzing a water solution of Al³⁺ with inert electrodes? The values are Al³⁺ −1.66 V and water −0.83 V. What forms at the cathode, and what is the fix?
Try it
Could magnesium be made by electrolyzing a water solution of Mg²⁺ with inert electrodes? The values are Mg²⁺ −2.37 V and water −0.83 V. What is reduced at the cathode?
Slide 9 of 9 · Redox in living things
Key ideas
An oxidation number is the charge an atom would have if all shared electrons went to the atom that . It helps us follow .
In C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O, oxygen falls from 0 to , so O₂ is .
Carbon averages 0 in glucose and in CO₂. Six carbon atoms each lose 4 electrons, so electrons are lost. Twelve oxygen atoms each gain 2, so 24 are gained.
Photosynthesis is the reverse: CO₂ is and water is . It needs , as an electrolytic cell needs a power supply.
Example
Cellular respiration is C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O. Find the oxidation numbers of carbon and oxygen, say what is oxidized and reduced, and count the electrons lost and gained.
Try it
Photosynthesis is 6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂. What is oxidized, what is reduced, and how many electrons do the carbon atoms gain in total?
Practice 1
Given that iron rusts in damp air. Write the oxidation and reduction half-reactions and find E°cell (Data Booklet table values: O₂/OH⁻ +0.40 V; Fe²⁺/Fe −0.45 V).
Practice 2
Given tin-plated steel with a deep scratch (Data Booklet table values: Sn²⁺/Sn −0.14 V; Fe²⁺/Fe −0.45 V). Which metal corrodes at the scratch, and why?
Practice 3
Given a steel pipe in wet soil joined to a zinc block (Data Booklet table values: Zn²⁺/Zn −0.76 V; Fe²⁺/Fe −0.45 V). Find protected minus sacrificial and state the electrode that is the anode.
Practice 4
Given an underground steel pipeline protected by a power supply. State which terminal the pipeline is joined to and why.
Practice 5
Given a steel hull in sea water. The metals to choose from are Cu (+0.34 V), Zn (−0.76 V) and Sn (−0.14 V), and Fe²⁺/Fe is −0.45 V. All four values are from the Data Booklet table. Choose a sacrificial anode and give protected minus sacrificial.
Practice 6
Given the refining of copper. State which electrode is the impure copper and write both half-reactions.
Practice 7
Given cellular respiration C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O. State what is oxidized, what is reduced, and the oxidizing and reducing agents.
Practice 8
Challenge: Given an aluminium production cell that runs at a steady 1.60 × 10⁵ A. The cathode half-reaction is Al³⁺ + 3e⁻ → Al (M = 26.98 g/mol). Use the Faraday chain from B10. Find the mass of aluminium made in 1.00 hour, in kilograms. Use F = 9.65 × 10⁴ C/mol e⁻.