B10 · Worked examples

These questions link electricity to chemistry. Current and time give charge, charge gives moles of electrons, a half-reaction gives moles of metal, and molar mass gives mass. Time must always be in seconds. The Faraday constant is F = 9.65 × 10⁴ C/mol e⁻, from the Data Booklet.

Open the B10 lesson · B10 slide notes

Worked question types

Each example shows every step, why you do it, and the idea behind it.

Question type

Find the charge from current and time

Use this when: The question gives a current and a time, often in minutes, and asks for the charge that moved.

Example. A power source drives a current of 2.50 amperes (A) through a cell for 12.0 minutes. Find the charge that moves, in coulombs (C).
  1. List the givens and the unknown.

    Writing both shows which unit must change before you calculate.

    Given: I = 2.50 A, t = 12.0 min. Asked: charge q in C

  2. Change the time to seconds.

    One ampere is one coulomb each second, so the time must be in seconds. Multiply minutes by 60.

    12.0 min × 60 s/min = 720 s

  3. Multiply current by time.

    Charge equals current times time, q = It. Amperes times seconds leaves coulombs.

    q = 2.50 A × 720 s = 1.80 × 10³ C

  4. Check the unit and the size.

    If the minutes were used by mistake, the charge would come out 60 times too small.

    2.50 × 12.0 = 30.0, and 30.0 × 60 = 1800 ✓

Why this works. A coulomb is a quantity of electric charge. Current is the charge that passes a point each second. So charge is current times time, and the time unit must be the second.

Check your answer. About 2.5 coulombs each second for about 700 seconds is about 1800 C.

Common mistake. Using minutes in q = It. The answer is then 60 times too small. Always change to seconds first.

Answer: q = 1.80 × 10³ C

Question type

Change charge to moles of electrons

Use this when: The question gives a charge in coulombs and asks for the moles of electrons, or the other way round.

Example. A charge of 2.40 × 10³ C moves through a cell. The Faraday constant F = 9.65 × 10⁴ C/mol e⁻ is the charge carried by one mole of electrons. Find the moles of electrons.
  1. Write what F means.

    F is a conversion factor, like a molar mass for charge. It lets you move between coulombs and moles.

    1 mol e⁻ = 9.65 × 10⁴ C

  2. Choose divide.

    You have coulombs and want moles. Dividing by coulombs per mole cancels the coulombs.

    n(e⁻) = q ÷ F

  3. Substitute.

    Use 9.65 × 10⁴ for F. Keep one extra digit in the middle value.

    n(e⁻) = 2400 C ÷ (9.65 × 10⁴) = 0.02487 mol

  4. Round the final answer.

    The charge has three significant digits, so the answer has three.

    0.02487 → 0.0249 mol

  5. Check the size.

    A whole mole of electrons is 9.65 × 10⁴ C. The charge 2400 C is a small piece of that.

    2400 ÷ (9.65 × 10⁴) is about 0.025, a small number ✓

Why this works. Chemistry counts in moles and electricity is measured in coulombs. The Faraday constant joins them. Dividing coulombs by F cancels the coulombs and leaves moles.

Check your answer. The answer is far below 1 mol, which fits a charge far below 9.65 × 10⁴ C.

Common mistake. Multiplying by F. That gives 2.32 × 10⁸ mol, a huge number that no small charge could produce.

Answer: n(e⁻) = 0.0249 mol

Question type

Find the moles of metal from the half-reaction

Use this when: The question gives moles of electrons and a metal ion, often hidden in a name, and asks for the moles of metal.

Example. Three solutions are electrolyzed: nickel(II) sulfate, silver nitrate and gold(III) chloride. In each, 0.0600 mol of electrons reaches the cathode. Find the moles of metal that form in each.
  1. Find the ion charge in the name.

    A Roman numeral gives the charge. Silver nitrate contains the silver ion, which has a charge of 1+.

    Ni²⁺, Ag⁺, Au³⁺

  2. Write each reduction half-reaction.

    The coefficient of e⁻ is the number of electrons for one metal atom. It equals the ion charge.

    Ni²⁺ + 2e⁻ → Ni Ag⁺ + e⁻ → Ag Au³⁺ + 3e⁻ → Au

  3. Divide by the coefficient of e⁻.

    Each half-reaction says so many electrons make one metal atom. So divide the moles of electrons by that number.

    Ni: 0.0600 ÷ 2 = 0.0300 mol Ag: 0.0600 ÷ 1 = 0.0600 mol Au: 0.0600 ÷ 3 = 0.0200 mol

  4. Keep the step for the 1 to 1 case.

    Dividing by 1 changes nothing, but you still read the ratio from the half-reaction.

    Ag: ratio 1 to 1

  5. Check with the electrons.

    Multiply each answer by its coefficient. You must get the 0.0600 mol of electrons back.

    2 × 0.0300 = 1 × 0.0600 = 3 × 0.0200 = 0.0600 mol ✓

Why this works. The ion charge sets how many electrons each metal atom needs. A larger charge means more electrons per atom, so fewer moles of metal from the same electrons.

Check your answer. The same electrons make the most silver and the least gold. That fits charges of 1+ and 3+.

Common mistake. Using a 1 to 1 ratio for every metal. Read the ratio from the half-reaction each time.

Answer: Ni: 0.0300 mol. Ag: 0.0600 mol. Au: 0.0200 mol

Question type

Run the chain forward to a mass

Use this when: The question gives a current, a time and a half-reaction or an ion, and asks for the mass of metal deposited.

Example. Nickel is plated from Ni²⁺ solution by a current of 2.50 A for 35.0 minutes. The molar mass of nickel is 58.69 g/mol. Find the mass of nickel deposited on the cathode.
  1. List the givens and the unknown.

    Use Method: how to find a mass from current and time. This shows the chain starts at current and time and ends at mass.

    Given: I = 2.50 A, t = 35.0 min, M = 58.69 g/mol. Asked: m(Ni)

  2. Change the time to seconds.

    The ampere has seconds built in.

    35.0 × 60 = 2100 s

  3. Find the charge.

    Charge equals current times time.

    q = 2.50 × 2100 = 5250 C

  4. Find the moles of electrons.

    Divide the charge by F.

    n(e⁻) = 5250 ÷ (9.65 × 10⁴) = 0.05440 mol

  5. Write the half-reaction and use its ratio.

    Two electrons make one nickel atom, so divide by 2.

    Ni²⁺ + 2e⁻ → Ni n(Ni) = 0.05440 ÷ 2 = 0.02720 mol

  6. Find the mass.

    Mass equals moles times molar mass. Round the final answer to three significant digits.

    m = 0.02720 mol × 58.69 g/mol = 1.596 g → 1.60 g

  7. Check with the one-formula route.

    The chain can be written m = (I × t × M) ÷ (z × F), where z is the 2 electrons in the half-reaction.

    (2.50 × 2100 × 58.69) ÷ (2 × (9.65 × 10⁴)) = 3.081 × 10⁵ ÷ 193 000 = 1.596 g ✓

Why this works. Every link has its own unit conversion. Seconds give coulombs, coulombs give moles of electrons, the half-reaction gives moles of metal, and molar mass gives grams.

Check your answer. About 0.054 mol of electrons makes about 0.027 mol of nickel. About 0.027 mol of a metal near 60 g/mol is about 1.6 g.

Common mistake. Leaving the time in minutes. The mass then comes out 60 times too small.

Answer: m(Ni) = 1.60 g

Question type

Run the chain when the time is in hours

Use this when: The question gives the time in hours and a metal with a 1 to 1 ratio of electrons to atoms, such as silver.

Example. A silver nitrate solution carries a current of 1.75 A for 2.50 hours. The cathode half-reaction is Ag⁺ + e⁻ → Ag and the molar mass of silver is 107.87 g/mol. Find the mass of silver deposited.
  1. Decide the first conversion.

    The time is in hours. One hour is 60 minutes and each minute is 60 seconds, so hours become seconds in two steps.

    2.50 h × 60 × 60 = 9000 s

  2. Find the charge.

    Charge equals current times time.

    q = 1.75 × 9000 = 1.575 × 10⁴ C

  3. Find the moles of electrons.

    Divide the charge by F.

    n(e⁻) = 1.575 × 10⁴ ÷ (9.65 × 10⁴) = 0.1632 mol

  4. Use the half-reaction ratio, even though it is 1 to 1.

    One electron makes one silver atom. Dividing by 1 changes nothing, but you still show the step.

    Ag⁺ + e⁻ → Ag n(Ag) = 0.1632 ÷ 1 = 0.1632 mol

  5. Find the mass.

    Multiply by the molar mass. Round the final answer to three significant digits.

    m = 0.1632 × 107.87 = 17.60 g → 17.6 g

  6. Check the size.

    About 0.16 mol times about 108 g/mol is about 17 g.

    0.16 × 108 = 17.3, close to 17.6 ✓

Why this works. The only new idea is the unit conversion. After the time is in seconds, the chain is the same as before. Silver needs one electron per atom, so the mole ratio is 1 to 1.

Check your answer. Silver has a large molar mass, so a modest 0.16 mol of silver is a large mass.

Common mistake. Skipping the ratio step because it is 1 to 1. Show it anyway, so you never assume a ratio.

Answer: m(Ag) = 17.6 g

Question type

Run the chain backward to a time

Use this when: The question gives a mass to be deposited and a current, and asks how long the current must run.

Example. A gold-plating cell uses a steady current of 0.800 A. Gold forms from Au³⁺ at the cathode. The molar mass of gold is 196.97 g/mol. How long, in minutes, must the current run to deposit 0.350 g of gold?
  1. Start at the given mass and walk backward.

    The mass is the given end of the chain. The time is the last link.

    Given: m = 0.350 g, I = 0.800 A, M = 196.97 g/mol. Asked: t in minutes

  2. Find the moles of gold.

    Moles equal mass divided by molar mass.

    n(Au) = 0.350 ÷ 196.97 = 0.001777 mol

  3. Go from metal to electrons.

    The half-reaction needs 3 electrons per atom. Going backward, multiply by 3.

    Au³⁺ + 3e⁻ → Au n(e⁻) = 3 × 0.001777 = 0.005331 mol

  4. Go from moles of electrons to charge.

    Moles to coulombs means multiply by F.

    q = 0.005331 × (9.65 × 10⁴) = 514.4 C

  5. Find the time in seconds.

    Since q = It, the time is charge divided by current.

    t = 514.4 ÷ 0.800 = 643.0 s

  6. Change to the unit asked for.

    The question wants minutes. Divide by 60, and round the final answer to three significant digits.

    643.0 ÷ 60 = 10.72 min → 10.7 min

Why this works. Walking backward reverses every step. Where you divided going forward, you multiply going back. A larger ion charge needs more electrons, so it takes more time.

Check your answer. A bigger current would push charge faster and shorten the time. About 0.0018 mol of gold needs about 0.0053 mol of electrons.

Common mistake. Dividing by 3 instead of multiplying. Going from metal back to electrons always multiplies by the coefficient of e⁻.

Answer: t = 10.7 min

Question type

Find the mass deposited from two weighings and compare it with the ideal model

Use this when: The question gives a cathode mass before and after plating, plus a current and time. It asks for the mass deposited or a comparison with the prediction.

Example. A cathode has a mass of 18.42 g before copper plating and 19.07 g after. The cell ran at 1.20 A for 30.0 minutes. The molar mass of copper is 63.55 g/mol. Find the mass deposited. Then find the mass the ideal chain predicts and compare the two.
  1. Use the gain, not the final reading.

    The cathode already had mass before the current started. Mass deposited is the final mass minus the starting mass.

    19.07 g − 18.42 g = 0.65 g

  2. Run the ideal chain, starting with the charge.

    The ideal model says every electron makes copper. Convert 30.0 min to 1800 s first.

    q = 1.20 × 1800 = 2160 C

  3. Find the moles of electrons.

    Divide by F.

    n(e⁻) = 2160 ÷ (9.65 × 10⁴) = 0.02238 mol

  4. Use the half-reaction.

    Cu²⁺ + 2e⁻ → Cu needs 2 electrons per atom, so divide by 2.

    n(Cu) = 0.02238 ÷ 2 = 0.01119 mol

  5. Find the ideal mass.

    Multiply by the molar mass. Round the final answer to three significant digits.

    m = 0.01119 × 63.55 = 0.7111 g → 0.711 g

  6. Compare.

    The measured gain is smaller than the ideal value. In a real cell, some charge can go to side reactions that do not make copper.

    measured 0.65 g < ideal 0.711 g

Why this works. The ideal model assumes all charge makes the wanted metal. A real cell can lose some charge to side reactions, so the measured gain can be smaller than the ideal mass.

Check your answer. The measured gain is positive and below the ideal value. A gain above the ideal value would be a sign of an error in the weighings.

Common mistake. Using the final mass, 19.07 g, as the mass deposited. The gain is the difference between the two weighings.

Answer: Mass deposited 0.65 g. Ideal mass 0.711 g. The measured value is lower, so some charge likely went to side reactions

Question type

Use the chain in a voltaic cell

Use this when: The question describes a voltaic cell, says how many moles of electrons flow in the wire, and asks how much reacts at each electrode.

Example. A voltaic cell has a copper anode and a silver cathode. In the wire, 0.0300 mol of electrons flows from the anode to the cathode. Find the moles of copper that dissolve and the moles of silver that deposit.
  1. Write the half-reaction at each electrode.

    The anode is where oxidation happens, so copper loses electrons. The cathode is where reduction happens, so silver ions gain them.

    Anode: Cu → Cu²⁺ + 2e⁻ Cathode: Ag⁺ + e⁻ → Ag

  2. Use the same electrons at both electrodes.

    The electrons leaving the anode are the electrons arriving at the cathode, so the same 0.0300 mol feeds both half-reactions.

    n(e⁻) = 0.0300 mol at each electrode

  3. Divide by each coefficient.

    Each half-reaction has its own ratio. Copper gives 2 electrons per atom. Silver takes 1 electron per atom.

    n(Cu) = 0.0300 ÷ 2 = 0.0150 mol n(Ag) = 0.0300 ÷ 1 = 0.0300 mol

  4. Check the electrons.

    The electrons given up must equal the electrons taken in.

    2 × 0.0150 = 0.0300 mol and 1 × 0.0300 = 0.0300 mol ✓

Why this works. The chain works in any cell, because it follows the electrons. In a voltaic cell the electrons come from the anode half-reaction and are used in the cathode half-reaction.

Check your answer. Silver needs fewer electrons per atom than copper, so twice as many moles of silver form as moles of copper dissolve.

Common mistake. Assuming the moles of metal are equal at both electrodes. They are equal only when both half-reactions use the same number of electrons.

Answer: Copper dissolved: 0.0150 mol. Silver deposited: 0.0300 mol

Diploma-style questions

Try each question first. Then open the worked solution.

Multiple choice · outcome 30-B2.8k
A current of 3.00 A runs for 15.0 minutes through a solution of Cu²⁺ ions. The cathode half-reaction is Cu²⁺ + 2e⁻ → Cu and the molar mass of copper is 63.55 g/mol. What mass of copper deposits?
  1. A. 0.0148 g
  2. B. 1.78 g
  3. C. 0.889 g
  4. D. 3.56 g
Show the worked solution (try the question first)
  1. Change the time to seconds.

    An ampere needs seconds.

    15.0 × 60 = 900.0 s

  2. Find the charge and the moles of electrons.

    Charge is It. Then divide by F.

    q = 3.00 × 900.0 = 2700 C n(e⁻) = 2700 ÷ (9.65 × 10⁴) = 0.02798 mol

  3. Use the half-reaction.

    Two electrons make one copper atom, so divide by 2.

    n(Cu) = 0.02798 ÷ 2 = 0.01399 mol

  4. Find the mass.

    Multiply by the molar mass.

    m = 0.01399 × 63.55 = 0.8891 g → 0.889 g

Why each choice is right or wrong

  • A. This leaves the time in minutes, so the charge is 60 times too small. The time must be 900.0 s.
  • B. This divides by 1 instead of 2. The ratio must come from Cu²⁺ + 2e⁻ → Cu, which is 2 electrons per copper atom.
  • C. Correct. Seconds, charge, electrons, a ratio of 2 to 1, then the molar mass give 0.889 g.
  • D. This multiplies the moles of electrons by 2. Going from electrons to metal divides by the coefficient of e⁻.

Answer: C

Numerical response · outcome 30-B2.8k
A current of 0.600 A flows for 45.0 minutes through a silver nitrate solution. The cathode half-reaction is Ag⁺ + e⁻ → Ag and the molar mass of silver is 107.87 g/mol. Find the mass of silver deposited. Record your answer as a.bc g. Enter the digits a, b and c.
Show the worked solution (try the question first)
  1. Change the time to seconds.

    45.0 min is 2700 s.

    45.0 × 60 = 2700 s

  2. Find the charge.

    Charge equals current times time.

    q = 0.600 × 2700 = 1620 C

  3. Find the moles of electrons and of silver.

    Divide by F. The ratio is 1 to 1.

    n(e⁻) = 1620 ÷ (9.65 × 10⁴) = 0.01679 mol n(Ag) = 0.01679 mol

  4. Find the mass.

    Multiply by the molar mass and round to three significant digits.

    m = 0.01679 × 107.87 = 1.811 g → 1.81 g

  5. Enter the digits.

    The value is 1.81, so a = 1, b = 8 and c = 1.

    record 1 8 1

Answer: 1.81 g. Record 1 8 1.

Numerical response · outcome 30-B2.8k
Nickel forms from Ni²⁺ at a cathode with a steady current of 4.00 A. The molar mass of nickel is 58.69 g/mol. How long, in minutes, must the current run to deposit 1.40 g of nickel? Record your answer as ab.c min. Enter the digits a, b and c.
Show the worked solution (try the question first)
  1. Find the moles of nickel.

    Start from the mass and walk backward.

    n(Ni) = 1.40 ÷ 58.69 = 0.02385 mol

  2. Find the moles of electrons.

    Ni²⁺ + 2e⁻ → Ni needs 2 electrons per atom, so multiply by 2.

    n(e⁻) = 2 × 0.02385 = 0.04770 mol

  3. Find the charge.

    Moles to coulombs means multiply by F.

    q = 0.04770 × (9.65 × 10⁴) = 4603 C

  4. Find the time.

    Divide the charge by the current, then change seconds to minutes.

    t = 4603 ÷ 4.00 = 1151 s 1151 ÷ 60 = 19.18 min → 19.2 min

  5. Enter the digits.

    The value is 19.2, so a = 1, b = 9 and c = 2.

    record 1 9 2

Answer: 19.2 min. Record 1 9 2.

Multiple choice · outcome 30-B2.8k
A cathode has a mass of 25.30 g before silver plating and 27.10 g after. The plating ran at 1.00 A for 30.0 minutes from Ag⁺ + e⁻ → Ag. The molar mass of silver is 107.87 g/mol. The ideal chain predicts 2.01 g. Which statement is correct?
  1. A. The mass deposited is 27.10 g, which is larger than the ideal 2.01 g.
  2. B. The mass deposited is 1.80 g, which is less than the ideal 2.01 g, so some charge may have gone to side reactions.
  3. C. The mass deposited is 1.80 g, which equals the ideal 2.01 g, so no side reactions happened.
  4. D. The mass deposited is 1.80 g, which is greater than the ideal 2.01 g.
Show the worked solution (try the question first)
  1. Find the mass deposited.

    Use the gain, not the final reading.

    27.10 − 25.30 = 1.80 g

  2. Compare with the ideal mass.

    The ideal value is 2.01 g.

    1.80 g < 2.01 g

  3. Explain the difference.

    A real cell can lose some charge to side reactions, so less metal forms than the ideal model predicts.

    choose B

Why each choice is right or wrong

  • A. This uses the final mass of the cathode. The mass deposited is the gain, 27.10 − 25.30 = 1.80 g.
  • B. Correct. The gain is 1.80 g, which is below the ideal 2.01 g. Side reactions can use some of the charge.
  • C. The gain is 1.80 g and the ideal value is 2.01 g. These are not equal, so the claim that no side reactions happened is not supported.
  • D. The number 1.80 is smaller than 2.01, not greater. The comparison is reversed.

Answer: B