B6 · Voltaic cells · Notes and practice

Download the printable PDF

Explain how a voltaic cell works, label its parts, write its notation and half-reactions, predict observations and calculate E°cell.

Open the complete lesson

Type in the blanks; your notes save on this device only. Use the backup controls at the bottom to keep a portable copy. Nothing is submitted.

1. Separate the halves

From direct contact to a cell

Zinc in copper(II) solution passes electrons at the metal surface, and the energy appears as . To use that energy, we make the electrons travel along a path we choose.

In a voltaic cell (also called a galvanic cell), each metal sits in its own solution and a joins them. A metal strip is an electrode. One electrode plus its solution is a half-cell, and the solution is the electrolyte, because its ions conduct charge.

Use the reduction table from B4. The higher value, Cu²⁺/Cu , is the oxidizing agent. The lower value, Zn²⁺/Zn , is the reducing agent.

The anode is where happens and the cathode is where happens. Here the zinc electrode is the and the copper electrode is the . Memory aid: AN OX (anode, oxidation) and RED CAT (reduction, cathode).

On the diploma: label the electrodes by their job, because an option with the anode and cathode swapped is a classic wrong choice.

Watch: What makes electricity in a zinc–copper cell (Tyler DeWitt, “Introduction to Electrochemistry”, 4:33)

Watch: Set up the two half-cells (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 1:34)

Where charge moves

Electrons leave the anode, travel through the and arrive at the cathode. Electrons do not travel through the . Moving ions carry the charge there.

Zinc releases electrons, so in a voltaic cell the anode is and the cathode is .

On the diploma: describe electron flow as going from the anode through the wire to the cathode.

Watch: Why electrons flow through the wire (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 4:41)

Watch: Anode and cathode (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 10:04)

Watch: A way to remember anode and cathode (Tyler DeWitt, “Introduction to Electrochemistry”, 10:44)

Zn²⁺/Zn −0.76 V; Cu²⁺/Cu +0.34 V. Higher value is reduced.Anode (oxidation): _____ Cathode (reduction): _____Electron path: _____ → wire → _____Notation: __________________________________
Voltaic cell with zinc and copper electrodes. Name the anode and cathode, give the electron path and write the cell notation.

2. The salt bridge and cell notation

Keep the charge balanced

At the anode, Zn → Zn²⁺ + 2e⁻ makes the solution gain charge. At the cathode, Cu²⁺ leaves the solution, which leaves extra charge on anions, the negative ions such as sulfate.

A salt bridge, a tube of unreactive ions, or a porous barrier lets move between the solutions. Anions move toward the beaker and cations, the positive ions, move toward the beaker.

Without a bridge, charge builds up and the electron flow . The bridge does not carry .

On the diploma: to explain why a cell stops, say charge builds up in each beaker. Match the ion type to the beaker with the opposite extra charge.

Watch: What the salt bridge does (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 16:48)

Watch: How ions move through the bridge (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 20:00)

Write the cell in one line

Notation: Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s). The is on the far left and the is on the far right, because electrons start at the anode.

A single line | separates , such as an electrode and its solution. The double line || stands for the . Always write state symbols.

Read from the left: the half on the left of the double line is . Halves for this cell: Zn → Zn²⁺ + and Cu²⁺ + 2e⁻ → .

On the diploma: a complete notation has the anode on the left, the double line in the middle and state symbols on every substance.

Watch: Cell notation (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 14:37)

3. Predict, then calculate

Observations from the half-reactions

Every prediction comes from a half-reaction. Given Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s). The copper anode mass as Cu → Cu²⁺ + 2e⁻. The copper solution is already blue, and more Cu²⁺ makes it blue.

The silver cathode mass because 2Ag⁺ + 2e⁻ → . The Ag⁺ concentration .

The overall reaction is Cu + 2Ag⁺ → . Copper gives two electrons and each Ag⁺ takes one, so the silver half is multiplied by .

On the diploma: state the change in mass, concentration and colour from the half-reaction, and do not mix up the two electrodes.

Watch: What you would see in each half-cell (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 9:18)

Cell potential

E°cell = E°cathode − E°. This is the B4 rule, oxidizing agent minus reducing agent, with new names. Zn/Cu: +0.34 − (−0.76) = . Cu/Ag: +0.80 − (+0.34) = .

Do not multiply a table value when you multiply a half-reaction. A negative E°cell warns that the .

The notation always puts the on the left, even when a drawing shows it on the right. Zn/Ag: E°cell = +0.80 − (−0.76) = .

On the diploma: keep the table signs, subtract cathode minus anode, and label electrodes from the table values, not from left and right.

Watch: Which metal pulls electrons harder (Tyler DeWitt, “Introduction to Electrochemistry”, 6:06)

Use the diagram response box for labels and arrows in words, or draw on the printable PDF.

Answer the 12 core practice problems online · Completed notes and worked key

B6-P01

Given Zn²⁺/Zn −0.76 V and Cu²⁺/Cu +0.34 V. Name the anode and the cathode, and write the half-reaction at each.

Response: ____________________

B6-P02

Describe the path of the electrons and the path of the charge in a Zn / Cu cell with a salt bridge.

Response: ____________________

B6-P03

Write the cell notation for a cell in which Mg(s) is oxidized and Cu²⁺(aq) is reduced, with a salt bridge.

Response: ____________________

B6-P04

Explain why a Zn / Cu cell with wires but no salt bridge or porous barrier stops after a moment.

Response: ____________________

B6-P05

In a cell with a salt bridge containing NaNO₃(aq), toward which beaker do the NO₃⁻ ions move in the cell Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s)? Explain.

Response: ____________________

B6-P06

Given Cu²⁺/Cu +0.34 V and Ag⁺/Ag +0.80 V. Write the half-reactions and the overall equation for the Cu / Ag cell.

Response: ____________________

B6-P07

Predict what happens to the mass of each electrode and to the colour of the copper solution while the Cu / Ag cell runs.

Response: ____________________

B6-P08

Calculate E°cell for the Zn / Cu cell and for the Cu / Ag cell. Use Zn²⁺/Zn −0.76 V, Cu²⁺/Cu +0.34 V and Ag⁺/Ag +0.80 V.

Response: ____________________

B6-P09

A student calculates E°cell = 0.34 − 0.80 = −0.46 V for the Cu / Ag cell. What was done wrong, and what is the correct value?

Response: ____________________

B6-P10

Given Zn²⁺/Zn −0.76 V and Ag⁺/Ag +0.80 V. A drawing shows the silver half on the left. Name the anode, write the cell notation and calculate E°cell.

Response: ____________________

B6-P11

Predict the change in mass of each electrode in the Zn / Ag cell, Zn(s) | Zn²⁺(aq) || Ag⁺(aq) | Ag(s), and write the half-reaction that explains each change.

Response: ____________________

B6-P12

Explain why the double line in a cell notation is needed and what two half-cells it joins.

Response: ____________________