B6 · Voltaic cells · Answer key
Download the printable PDF
Explain how a voltaic cell works, label its parts, write its notation and half-reactions, predict observations and calculate E°cell.
Open the complete lesson
1. Separate the halves
From direct contact to a cell
Zinc in copper(II) solution passes electrons directly at the metal surface, and the energy appears as heat. To use that energy, we make the electrons travel along a path we choose.
In a voltaic cell (also called a galvanic cell), each metal sits in its own solution and a wire joins them. A metal strip is an electrode. One electrode plus its solution is a half-cell, and the solution is the electrolyte, because its ions conduct charge.
Use the reduction table from B4. The higher value, Cu²⁺/Cu +0.34 V, is the oxidizing agent. The lower value, Zn²⁺/Zn −0.76 V, is the reducing agent.
The anode is where oxidation happens and the cathode is where reduction happens. Here the zinc electrode is the anode and the copper electrode is the cathode. Memory aid: AN OX (anode, oxidation) and RED CAT (reduction, cathode).
On the diploma: label the electrodes by their job, because an option with the anode and cathode swapped is a classic wrong choice.
Watch: What makes electricity in a zinc–copper cell (Tyler DeWitt, “Introduction to Electrochemistry”, 4:33)
Watch: Set up the two half-cells (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 1:34)
Where charge moves
Electrons leave the anode, travel through the wire and arrive at the cathode. Electrons do not travel through the solutions. Moving ions carry the charge there.
Zinc releases electrons, so in a voltaic cell the anode is negative and the cathode is positive.
On the diploma: describe electron flow as going from the anode through the wire to the cathode.
Watch: Why electrons flow through the wire (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 4:41)
Watch: Anode and cathode (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 10:04)
Watch: A way to remember anode and cathode (Tyler DeWitt, “Introduction to Electrochemistry”, 10:44)
Voltaic cell with zinc and copper electrodes. Name the anode and cathode, give the electron path and write the cell notation. Completed labels: Zn²⁺/Zn −0.76 V; Cu²⁺/Cu +0.34 V. Higher value is reduced.; Anode (oxidation): Zn Cathode (reduction): Cu; Electron path: Zn electrode → wire → Cu electrode; Notation: Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s)2. The salt bridge and cell notation
Keep the charge balanced
At the anode, Zn → Zn²⁺ + 2e⁻ makes the solution gain positive charge. At the cathode, Cu²⁺ leaves the solution, which leaves extra negative charge on anions, the negative ions such as sulfate.
A salt bridge, a tube of unreactive ions, or a porous barrier lets ions move between the solutions. Anions move toward the anode beaker and cations, the positive ions, move toward the cathode beaker.
Without a bridge, charge builds up and the electron flow stops. The bridge does not carry electrons.
On the diploma: to explain why a cell stops, say charge builds up in each beaker. Match the ion type to the beaker with the opposite extra charge.
Watch: What the salt bridge does (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 16:48)
Watch: How ions move through the bridge (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 20:00)
Write the cell in one line
Notation: Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s). The anode is on the far left and the cathode is on the far right, because electrons start at the anode.
A single line | separates phases, such as an electrode and its solution. The double line || stands for the salt bridge. Always write state symbols.
Read from the left: the half on the left of the double line is oxidized. Halves for this cell: Zn → Zn²⁺ + 2e⁻ and Cu²⁺ + 2e⁻ → Cu.
On the diploma: a complete notation has the anode on the left, the double line in the middle and state symbols on every substance.
Watch: Cell notation (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 14:37)
3. Predict, then calculate
Observations from the half-reactions
Every prediction comes from a half-reaction. Given Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s). The copper anode loses mass as Cu → Cu²⁺ + 2e⁻. The copper solution is already blue, and more Cu²⁺ makes it deeper blue.
The silver cathode gains mass because 2Ag⁺ + 2e⁻ → 2Ag. The Ag⁺ concentration decreases.
The overall reaction is Cu + 2Ag⁺ → Cu²⁺ + 2Ag. Copper gives two electrons and each Ag⁺ takes one, so the silver half is multiplied by 2.
On the diploma: state the change in mass, concentration and colour from the half-reaction, and do not mix up the two electrodes.
Watch: What you would see in each half-cell (Tyler DeWitt, “Galvanic Cells (Voltaic Cells)”, 9:18)
Cell potential
E°cell = E°cathode − E°anode. This is the B4 rule, oxidizing agent minus reducing agent, with new names. Zn/Cu: +0.34 − (−0.76) = +1.10 V. Cu/Ag: +0.80 − (+0.34) = +0.46 V.
Do not multiply a table value when you multiply a half-reaction. A negative E°cell warns that the electrodes were swapped.
The notation always puts the anode on the left, even when a drawing shows it on the right. Zn/Ag: E°cell = +0.80 − (−0.76) = +1.56 V.
On the diploma: keep the table signs, subtract cathode minus anode, and label electrodes from the table values, not from left and right.
Watch: Which metal pulls electrons harder (Tyler DeWitt, “Introduction to Electrochemistry”, 6:06)
The completed diagram and text above answer the same labels as the student copy.
Answer the 12 core practice problems online · Completed notes and worked key
B6-P01
Given Zn²⁺/Zn −0.76 V and Cu²⁺/Cu +0.34 V. Name the anode and the cathode, and write the half-reaction at each.
- Cu²⁺/Cu has the higher table value, so copper(II) is reduced at the cathode. Zinc is oxidized at the anode.
- Anode: Zn → Zn²⁺ + 2e⁻. Cathode: Cu²⁺ + 2e⁻ → Cu.
B6-P02
Describe the path of the electrons and the path of the charge in a Zn / Cu cell with a salt bridge.
- Electrons leave the zinc anode, travel through the wire and arrive at the copper cathode.
- In the solutions and the salt bridge, the charge is carried by ions. Electrons do not travel through the solutions.
B6-P03
Write the cell notation for a cell in which Mg(s) is oxidized and Cu²⁺(aq) is reduced, with a salt bridge.
- Mg(s) | Mg²⁺(aq) || Cu²⁺(aq) | Cu(s).
- The anode half is on the far left, the double line is the salt bridge, and the cathode half is on the far right.
B6-P04
Explain why a Zn / Cu cell with wires but no salt bridge or porous barrier stops after a moment.
- Zn²⁺ builds up in the anode beaker, so positive charge builds up there. The cathode beaker is left with extra negative charge.
- Without a bridge the ions cannot balance the charge, so the electron flow stops.
B6-P05
In a cell with a salt bridge containing NaNO₃(aq), toward which beaker do the NO₃⁻ ions move in the cell Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s)? Explain.
- The NO₃⁻ ions move toward the copper (anode) beaker.
- Cu²⁺ ions are made at the anode, so positive charge builds up there. The anions move in to balance it, and the Na⁺ ions move toward the silver beaker.
B6-P06
Given Cu²⁺/Cu +0.34 V and Ag⁺/Ag +0.80 V. Write the half-reactions and the overall equation for the Cu / Ag cell.
- Anode: Cu → Cu²⁺ + 2e⁻. Cathode: 2Ag⁺ + 2e⁻ → 2Ag, because each silver ion takes one electron and copper gives two.
- Overall: Cu + 2Ag⁺ → Cu²⁺ + 2Ag. Copper is 1 on each side, silver is 2 and charge is +2 on each side.
B6-P07
Predict what happens to the mass of each electrode and to the colour of the copper solution while the Cu / Ag cell runs.
- The copper electrode loses mass because Cu → Cu²⁺ + 2e⁻ at the anode. The silver electrode gains mass because Ag⁺ becomes Ag at the cathode.
- Cu²⁺ increases, so the blue colour of the copper solution gets deeper.
B6-P08
Calculate E°cell for the Zn / Cu cell and for the Cu / Ag cell. Use Zn²⁺/Zn −0.76 V, Cu²⁺/Cu +0.34 V and Ag⁺/Ag +0.80 V.
- Zn / Cu: E°cell = E°cathode − E°anode = 0.34 − (−0.76) = +1.10 V.
- Cu / Ag: E°cell = 0.80 − 0.34 = +0.46 V.
B6-P09
A student calculates E°cell = 0.34 − 0.80 = −0.46 V for the Cu / Ag cell. What was done wrong, and what is the correct value?
- The values were subtracted the wrong way round. Silver is the cathode, so its value goes first.
- The correct value is 0.80 − 0.34 = +0.46 V. A negative answer warns that the electrodes were swapped.
B6-P10
Given Zn²⁺/Zn −0.76 V and Ag⁺/Ag +0.80 V. A drawing shows the silver half on the left. Name the anode, write the cell notation and calculate E°cell.
- Silver has the higher table value, so it is the cathode. Zinc is the anode, even though it is drawn on the right.
- Notation always puts the anode on the left: Zn(s) | Zn²⁺(aq) || Ag⁺(aq) | Ag(s).
- E°cell = 0.80 − (−0.76) = +1.56 V.
B6-P11
Predict the change in mass of each electrode in the Zn / Ag cell, Zn(s) | Zn²⁺(aq) || Ag⁺(aq) | Ag(s), and write the half-reaction that explains each change.
- The zinc electrode loses mass: Zn → Zn²⁺ + 2e⁻ at the anode.
- The silver electrode gains mass: Ag⁺ + e⁻ → Ag at the cathode.
B6-P12
Explain why the double line in a cell notation is needed and what two half-cells it joins.
- The double line stands for the salt bridge or porous barrier. Without it, the circuit through the solutions is not complete.
- It separates the anode half on its left from the cathode half on its right. Each single line separates a metal electrode from its solution.