B16 · Unit B review: choose the method · Notes and practice

Download the printable PDF

Sort a problem, choose between the table, Faraday and titration, and apply Unit B ideas to corrosion, plating, refining and batteries.

Open the complete lesson

Type in the blanks; your notes save on this device only. Use the backup controls at the bottom to keep a portable copy. Nothing is submitted.

1. Choose the method

Sort the problem

Choose the method before you touch a calculator. Voltage, spontaneity or the anode: use the table. Mass, current or time at an electrode: use ’s law.

A concentration from a volume of a reactant: use a redox . It finds a concentration by reacting a sample with a solution of known concentration.

A positive E°cell means the reaction runs by itself, so it can be a cell. A negative E°cell needs a power supply, so the cell is .

Either way, oxidation happens at the . The electrode names follow the reaction, not the cell type.

On the diploma: many wrong options use the right numbers in the wrong method, so name the method first.

Watch: Is this equation redox or not? (Alberta Chemistry Teacher, “Electrochemistry Diploma Prep - Chemistry 30 - Part 1 of 4”, 18:39)

Watch: Spotting disproportionation (Alberta Chemistry Teacher, “Electrochemistry Diploma Prep - Chemistry 30 - Part 1 of 4”, 20:04)

Methods in order

Table: the anode is the value, E°cell = cathode − anode. Do not E° values by coefficients, because voltage does not depend on the number of copies.

Faraday: q = with the time in seconds, then n(e⁻) = q ÷ 9.65 × 10⁴, then the mole from the half-reaction, then the mass.

Titration: balance the , find the amount of the known reactant, use the ratio, then divide by the volume in . Divide millilitres by 1000.

The endpoint is the moment the reaction is just complete. With permanganate, it is the first lasting pale pink, so no indicator is needed.

On the diploma: a wrong mole ratio is a common wrong option, so read it from the half-reaction or the balanced equation.

Watch: Trends in the reduction table (Alberta Chemistry Teacher, “Electrochemistry Diploma Prep - Chemistry 30 - Part 1 of 4”, 23:36)

Watch: Patterns: metals, halogens and multivalent ions (Alberta Chemistry Teacher, “Electrochemistry Diploma Prep - Chemistry 30 - Part 1 of 4”, 24:21)

2. Apply the ideas

Corrosion and industry

Magnesium (−2.37 V) is below iron (−0.45 V), so it is a stronger reducing agent. It is the anode that is oxidized, and the iron is protected as the cathode.

A power supply protects iron too, by making it the cathode. Both methods stop the iron from being oxidized.

In electroplating the object is the . In refining the impure metal is the . Oxidation is always at the anode, reduction at the cathode.

Judge a battery by voltage, mass, cost, lifetime and . On the diploma: a wrong electrode is a common wrong choice, so label the anode and cathode first.

Use the diagram response box for labels and arrows in words, or draw on the printable PDF.

Answer the 12 core practice problems online · Completed notes and worked key

B16-P01

Which method do you use for a question that gives 2.00 A for 30.0 min and asks for a mass of copper? Explain.

Response: ____________________

B16-P02

Given a calculated E°cell of −0.50 V. State the type of cell that can make the reaction happen and what it needs.

Response: ____________________

B16-P03

Given Al³⁺/Al −1.66 V and Ag⁺/Ag +0.80 V. Write the cell reaction.

Response: ____________________

B16-P04

Find the voltage of the aluminium and silver cell, and explain why the silver value is not multiplied by three.

Response: ____________________

B16-P05

A current of 3.00 A runs for 25.0 min with a silver cathode in Ag⁺ solution. Find the charge and the amount of electrons.

Response: ____________________

B16-P06

Continue the last question and find the mass of silver deposited. M(Ag) = 107.87 g/mol.

Response: ____________________

B16-P07

Given 4.00 A for 20.0 min through Cu²⁺(aq) with a copper cathode. Find the mass of copper deposited. M(Cu) = 63.55 g/mol.

Response: ____________________

B16-P08

Given MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. If 20.00 mL of 0.0150 mol/L MnO₄⁻ reacts with 25.00 mL of Fe²⁺(aq), find [Fe²⁺].

Response: ____________________

B16-P09

Describe the end point of the permanganate titration and say why no indicator is added.

Response: ____________________

B16-P10

Explain how a magnesium block protects a steel pipe in soil. Name the role of the pipe.

Response: ____________________

B16-P11

A spoon is plated with silver using a silver nitrate solution. Name the electrode for the spoon, the half-reaction there and the power supply connection.

Response: ____________________

B16-P12

Choose the method and solve: 2.00 A runs for 30.0 min through molten NaCl. Find the mass of sodium at the cathode. M(Na) = 22.99 g/mol.

Response: ____________________