B16 · Unit B review: choose the method · Answer key
Download the printable PDF
Sort a problem, choose between the table, Faraday and titration, and apply Unit B ideas to corrosion, plating, refining and batteries.
Open the complete lesson
1. Choose the method
Sort the problem
Choose the method before you touch a calculator. Voltage, spontaneity or the anode: use the reduction table. Mass, current or time at an electrode: use Faraday’s law.
A concentration from a volume of a reactant: use a redox titration. It finds a concentration by reacting a sample with a solution of known concentration.
A positive E°cell means the reaction runs by itself, so it can be a voltaic cell. A negative E°cell needs a power supply, so the cell is electrolytic.
Either way, oxidation happens at the anode. The electrode names follow the reaction, not the cell type.
On the diploma: many wrong options use the right numbers in the wrong method, so name the method first.
Watch: Is this equation redox or not? (Alberta Chemistry Teacher, “Electrochemistry Diploma Prep - Chemistry 30 - Part 1 of 4”, 18:39)
Watch: Spotting disproportionation (Alberta Chemistry Teacher, “Electrochemistry Diploma Prep - Chemistry 30 - Part 1 of 4”, 20:04)
Methods in order
Table: the anode is the lower value, E°cell = cathode − anode. Do not multiply E° values by coefficients, because voltage does not depend on the number of copies.
Faraday: q = It with the time in seconds, then n(e⁻) = q ÷ 9.65 × 10⁴, then the mole ratio from the half-reaction, then the mass.
Titration: balance the equation, find the amount of the known reactant, use the ratio, then divide by the volume in litres. Divide millilitres by 1000.
The endpoint is the moment the reaction is just complete. With permanganate, it is the first lasting pale pink, so no indicator is needed.
On the diploma: a wrong mole ratio is a common wrong option, so read it from the half-reaction or the balanced equation.
Watch: Trends in the reduction table (Alberta Chemistry Teacher, “Electrochemistry Diploma Prep - Chemistry 30 - Part 1 of 4”, 23:36)
Watch: Patterns: metals, halogens and multivalent ions (Alberta Chemistry Teacher, “Electrochemistry Diploma Prep - Chemistry 30 - Part 1 of 4”, 24:21)
2. Apply the ideas
Corrosion and industry
Magnesium (−2.37 V) is below iron (−0.45 V), so it is a stronger reducing agent. It is the sacrificial anode that is oxidized, and the iron is protected as the cathode.
A power supply protects iron too, by making it the cathode. Both methods stop the iron from being oxidized.
In electroplating the object is the cathode. In refining the impure metal is the anode. Oxidation is always at the anode, reduction at the cathode.
Judge a battery by voltage, mass, cost, lifetime and disposal. On the diploma: a wrong electrode is a common wrong choice, so label the anode and cathode first.
The completed diagram and text above answer the same labels as the student copy.
Answer the 12 core practice problems online · Completed notes and worked key
B16-P01
Which method do you use for a question that gives 2.00 A for 30.0 min and asks for a mass of copper? Explain.
- Use Faraday’s law for a mass at an electrode.
- What is given are a current and a time, and the question asks for a mass at an electrode.
B16-P02
Given a calculated E°cell of −0.50 V. State the type of cell that can make the reaction happen and what it needs.
- A negative E°cell means the reaction is not spontaneous.
- It needs an electrolytic cell and a power supply that provides more than 0.50 V.
B16-P03
Given Al³⁺/Al −1.66 V and Ag⁺/Ag +0.80 V. Write the cell reaction.
- Aluminium is the anode and gives three electrons. Each silver ion takes one, so triple the silver half.
- The cell reaction is Al + 3Ag⁺ → Al³⁺ + 3Ag.
B16-P04
Find the voltage of the aluminium and silver cell, and explain why the silver value is not multiplied by three.
- E°cell = 0.80 − (−1.66) = +2.46 V.
- A table value does not depend on the number of copies of the half-reaction.
B16-P05
A current of 3.00 A runs for 25.0 min with a silver cathode in Ag⁺ solution. Find the charge and the amount of electrons.
- Time = 25.0 × 60 = 1500 s, so q = 3.00 × 1500 = 4500 C.
- n(e⁻) = 4500 ÷ (9.65 × 10⁴) = 0.0466 mol.
B16-P06
Continue the last question and find the mass of silver deposited. M(Ag) = 107.87 g/mol.
- The ratio is 1 to 1, so n(Ag) = 0.0466 mol.
- m = 0.0466 × 107.87 = 5.03 g.
B16-P07
Given 4.00 A for 20.0 min through Cu²⁺(aq) with a copper cathode. Find the mass of copper deposited. M(Cu) = 63.55 g/mol.
- q = 4.00 × 1200 = 4800 C. n(e⁻) = 4800 ÷ (9.65 × 10⁴) = 0.04974 mol.
- Two electrons deposit one copper atom, so n(Cu) = 0.02487 mol and m = 1.58 g.
B16-P08
Given MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. If 20.00 mL of 0.0150 mol/L MnO₄⁻ reacts with 25.00 mL of Fe²⁺(aq), find [Fe²⁺].
- n(MnO₄⁻) = 0.02000 × 0.0150 = 3.00 × 10⁻⁴ mol. The ratio is 5 to 1, so n(Fe²⁺) = 1.50 × 10⁻³ mol.
- [Fe²⁺] = 1.50 × 10⁻³ ÷ 0.02500 = 0.0600 mol/L.
B16-P09
Describe the end point of the permanganate titration and say why no indicator is added.
- The end point is the first lasting pale pink.
- Permanganate is purple and fades as it reacts, so it is its own indicator.
B16-P10
Explain how a magnesium block protects a steel pipe in soil. Name the role of the pipe.
- Magnesium has a lower reduction value, so it is oxidized instead of iron.
- The magnesium is the anode and is used up, and the pipe is the cathode.
B16-P11
A spoon is plated with silver using a silver nitrate solution. Name the electrode for the spoon, the half-reaction there and the power supply connection.
- The spoon is the cathode, where silver ions are reduced: Ag⁺ + e⁻ → Ag.
- The spoon is connected to the negative terminal of the power supply.
B16-P12
Choose the method and solve: 2.00 A runs for 30.0 min through molten NaCl. Find the mass of sodium at the cathode. M(Na) = 22.99 g/mol.
- Use Faraday. q = 2.00 × 1800 = 3600 C and n(e⁻) = 3600 ÷ (9.65 × 10⁴) = 0.0373 mol.
- The ratio is 1 to 1, so m = 0.0373 × 22.99 = 0.858 g.