B13 · Batteries, fuel cells and chlorine for water · Answer key

Download the printable PDF

Explain batteries as voltaic cells and write the reactions of lead-acid, alkaline and fuel cells. Explain chlorine production for water and judge a cell using evidence.

Open the complete lesson

1. Batteries

A battery is one or more voltaic cells

A voltaic cell has an anode, a cathode and an electrolyte, which is a liquid with dissolved ions. A battery is one or more of them.

Cells joined in a row add their voltages, so more cells means more voltage.

A primary cell is used once, because its reaction cannot easily be reversed. A secondary cell can be recharged.

During discharge a battery is a voltaic cell. The reaction runs by itself and gives electricity.

During recharge a power supply forces the reverse reaction, so it is an electrolytic cell (B8). The electrode that was oxidized is now reduced, so the names anode and cathode swap.

On the diploma: to name the anode, ask where oxidation is happening in that direction. A battery can be one cell or several cells in a row.

The lead-acid cell

The booklet has two lead rows: PbO₂ + SO₄²⁻ + 4H⁺ + 2e⁻ → PbSO₄ + 2H₂O (+1.69 V) and PbSO₄ + 2e⁻ → Pb + SO₄²⁻ (−0.36 V).

PbO₂ has the higher value, +1.69 V, so it is the cathode. The lower row runs backward at the anode: Pb + SO₄²⁻ → PbSO₄ + 2e⁻. So lead is the anode.

E°cell = 1.69 − (−0.36) = +2.05 V. One cell is not enough for a car, and voltages add. Six cells in a row give 6 × 2.05 = 12.3 V.

Both halves move two electrons, so no multiplier is needed. The cell reaction is PbO₂ + Pb + 2SO₄²⁻ + 4H⁺ → 2PbSO₄ + 2H₂O. Atom check: Pb 2, S 2, O 10, H 4, charge 0.

H⁺ and SO₄²⁻ are reactants, so they get used up and the acid gets weaker. PbSO₄ is a solid that forms on both electrodes, so both electrodes gain mass.

We cannot use part of a cell. If each cell gives 2.05 V and a battery needs 7.0 V, then 7.0 ÷ 2.05 = 3.41, so round up to 4 cells.

On the diploma: reverse the lower half-reaction but keep its E° as printed, and never multiply E° by a coefficient. Common wrong choices forget the six cells or say the anode loses mass.

PbO₂ (+1.69 V) and PbSO₄/Pb (−0.36 V). Cathode: PbO₂; anode: PbE°cell = 1.69 − (−0.36) = +2.05 VSix cells in a row: 6 × 2.05 = 12.3 VDischarge: both electrodes gain mass as PbSO₄ forms.
Lead-acid cell. Give the cathode, the anode, the cell voltage and the voltage of six cells in a row. Completed labels: PbO₂ (+1.69 V) and PbSO₄/Pb (−0.36 V). Cathode: PbO₂; anode: Pb; E°cell = 1.69 − (−0.36) = +2.05 V; Six cells in a row: 6 × 2.05 = 12.3 V; Discharge: both electrodes gain mass as PbSO₄ forms.

2. Alkaline cells and fuel cells

The alkaline cell

An alkaline cell, like a flashlight cell, is a primary cell. Its half-reactions are given, so we do not need the table.

The anode is zinc, which is oxidized because it loses electrons: Zn + 2OH⁻ → ZnO + H₂O + 2e⁻. The cathode is MnO₂, which is reduced: 2MnO₂ + H₂O + 2e⁻ → Mn₂O₃ + 2OH⁻.

Add the halves and cancel the electrons, water and hydroxide ions. The overall reaction is Zn + 2MnO₂ → ZnO + Mn₂O₃. It is a primary cell with a given voltage of about 1.5 V.

Used cells contain metals, like zinc and manganese compounds. In the garbage they can harm soil and water, so they should be recycled or disposed of properly.

On the diploma: when half-reactions are given, use them and do not search the booklet. An Evaluate item about batteries expects a benefit and a disposal concern.

The hydrogen fuel cell

Hydrogen is oxidized at the anode: 2H₂ → 4H⁺ + 4e⁻. Oxygen is reduced at the cathode: O₂ + 4H⁺ + 4e⁻ → 2H₂O.

The electrons travel through the outside circuit, and that is the current we use. Hydrogen ions cross a membrane inside the cell to complete the circuit.

Both halves move four electrons, so they cancel. Overall: 2H₂ + O₂ → 2H₂O. E°cell = 1.23 − 0.00 = +1.23 V, and we do not multiply E° by the 2.

A fuel cell is fed fuel all the time, so it keeps running. A battery stores a fixed amount of reactants and runs down.

On the diploma: the particle that is oxidized is the one that loses electrons. Do not multiply E° by the coefficient you used to balance electrons.

3. Chlorine for water and judging cells

Chlorine for a pool

A pool system passes current through NaCl(aq). The cathode makes hydrogen: 2H₂O + 2e⁻ → H₂ + 2OH⁻. The anode makes chlorine: 2Cl⁻ → Cl₂ + 2e⁻.

The table says water should be oxidized, but chlorine forms because of the chloride anomaly from B9.

The Cl₂ then reacts with hydroxide: Cl₂ + 2OH⁻ → Cl⁻ + OCl⁻ + H₂O. One chlorine goes from 0 to −1, so it is reduced. The other goes from 0 to +1, so it is oxidized.

The same element is both oxidized and reduced, which we call a disproportionation.

The ion OCl⁻ cleans the water, because it is an oxidizing agent that oxidizes bacteria.

On the diploma: write the oxidation number of chlorine on each side before you name the change. Hydrogen is at the cathode and chlorine at the anode.

Judge a cell

Start with the job. Then compare voltage, mass, lifetime, recharging, cost and disposal as separate pieces of evidence.

A higher voltage does not prove a longer life or a lower cost. A primary cell is cheap and keeps its charge in storage, so it suits a flashlight that is used rarely.

A fuel cell runs as long as fuel arrives. But a claim of no emissions only covers the cell itself, so we need evidence about how the fuel is made and delivered.

On the diploma: a common wrong choice says the highest-voltage cell is best. Justify your choice with one advantage and one limit.

Extracting metals long ago

Early peoples heated copper ore with charcoal long before anyone knew about electrons: 2CuO + C → 2Cu + CO₂. Copper goes from +2 to 0, so it is reduced. Carbon goes from 0 to +4, so it is oxidized.

Carbon gave electrons to copper(II), so carbon is the reducing agent. It is the one whose oxidation number goes up.

Trial and error came first, and the redox model explained it later. The model also showed that metals low on the table, like aluminium, have ions that accept electrons so poorly that carbon cannot reduce them. Those need electrolysis (B12).

On the diploma: for a science and technology question, give one example in each direction.

The completed diagram and text above answer the same labels as the student copy.

Answer the 12 core practice problems online · Completed notes and worked key

B13-P01

Explain the difference between a primary cell and a secondary cell, and give one example of each from this lesson.

  1. A primary cell is used once and then disposed of or recycled. An alkaline flashlight cell is an example.
  2. A secondary cell can be recharged. A lead-acid car battery is an example.

B13-P02

A lead-acid car battery is recharged. State what kind of cell it is during recharging, and what the power supply does.

  1. During recharging the battery is an electrolytic cell.
  2. The power supply forces the reaction backward, so PbSO₄ changes back to Pb and PbO₂.

B13-P03

Given PbO₂ + SO₄²⁻ + 4H⁺ + 2e⁻ → PbSO₄ + 2H₂O (+1.69 V) and PbSO₄ + 2e⁻ → Pb + SO₄²⁻ (−0.36 V). Name the cathode and the anode for a discharging lead-acid cell.

  1. The higher value, +1.69 V, is reduced at the cathode, so PbO₂ is the cathode.
  2. The lead is oxidized at the anode: Pb + SO₄²⁻ → PbSO₄ + 2e⁻.

B13-P04

Write the cell reaction for the discharging lead-acid cell and find E°cell.

  1. Both halves move two electrons, so add them without a multiplier.
  2. PbO₂ + Pb + 2SO₄²⁻ + 4H⁺ → 2PbSO₄ + 2H₂O. E°cell = 1.69 − (−0.36) = +2.05 V.

B13-P05

A car battery has six lead-acid cells in a row. Find its voltage and explain why cells in a row are used.

  1. The voltages add: 6 × 2.05 = 12.3 V.
  2. One cell gives only 2.05 V, so many cells are joined to get a voltage large enough for the car.

B13-P06

Describe what happens to the acid and to the mass of each electrode as a lead-acid battery discharges.

  1. Hydrogen ions and sulfate ions are used up, so the acid gets weaker.
  2. Solid PbSO₄ forms on both electrodes, so each electrode gains mass.

B13-P07

Given the alkaline cell half-reactions Zn + 2OH⁻ → ZnO + H₂O + 2e⁻ and 2MnO₂ + H₂O + 2e⁻ → Mn₂O₃ + 2OH⁻. Add them and write the overall reaction.

  1. Each half moves two electrons. Cancel the electrons, water and hydroxide ions.
  2. The overall reaction is Zn + 2MnO₂ → ZnO + Mn₂O₃.

B13-P08

Why should used alkaline cells be recycled or disposed of properly instead of being thrown into the garbage?

  1. Used cells contain metals and other chemicals.
  2. These can harm the environment if they leak into soil or water, so recycling recovers the metals and reduces the harm.

B13-P09

Given H₂ → 2H⁺ + 2e⁻ (0.00 V) and O₂ + 4H⁺ + 4e⁻ → 2H₂O (+1.23 V). Write the overall fuel cell reaction and find E°cell.

  1. Multiply the hydrogen half by 2 so that four electrons match.
  2. 2H₂ + O₂ → 2H₂O. E°cell = 1.23 − 0.00 = +1.23 V.

B13-P10

A company says that its fuel cell makes only water, so its total emissions are zero. Evaluate the claim.

  1. The claim is about the cell where it runs. It does not include the making and delivery of the hydrogen.
  2. We need evidence about how the hydrogen is made, squeezed into tanks and moved. We cannot accept or reject the claim without it.

B13-P11

A flashlight is used only now and then. Compare an alkaline cell and a rechargeable cell for this job, and name the evidence that you would use.

  1. An alkaline primary cell is cheap and keeps its charge when stored, so it suits a device that is used rarely.
  2. A rechargeable cell costs more at the start and pays off only when it is recharged many times. We compare cost, lifetime and use, not voltage alone.

B13-P12

Salt water is electrolyzed in a pool system. Name the product at each electrode, and show with oxidation numbers that Cl₂ + 2OH⁻ → Cl⁻ + OCl⁻ + H₂O is a disproportionation.

  1. Hydrogen forms at the cathode and chlorine forms at the anode.
  2. In Cl₂ the oxidation number is 0. In Cl⁻ it is −1 and in OCl⁻ it is +1, so chlorine is both reduced and oxidized.