B7 · Worked examples
These questions are about the electric field between charged plates. You find the field from the voltage and the gap, read graphs, and then find the force, acceleration and speed of a charge between the plates.
Open the B7 lesson · B7 notes and practice
Method slides in this lesson: “Method: how to solve a parallel-plate problem”. Find them in the lesson slides, with the steps for each skill in one place.
Worked question types
Each example shows every step, why you do it, and the idea behind it.
Question typeCompare a point-charge field with a field between plates
Use this when: A charge is released in two different fields. The question asks how the force, acceleration and kinetic energy change as it moves.
Example. A positive object is released from rest in each of two fields. In field 1, a +2.0 μC point charge pushes it away from r = 0.10 m to r = 0.30 m. In field 2, it is released between parallel plates and moves across the gap. Nothing else acts on the object. How does the acceleration change in each field? What happens to the kinetic energy?
- Link the acceleration to the field.
The only force is F = qE. By Newton’s second law, a = F ÷ m. So the acceleration changes only if E changes.
a = qE ÷ m
- Find the point-charge field at the start.
A point charge has a radial field. Use E = kQ/r².
E = (8.99 × 10⁹)(2.0 × 10⁻⁶) ÷ (0.10)² = 1.80 × 10⁶ N/C
- Find it at the end.
The same equation, with the larger distance.
E = (8.99 × 10⁹)(2.0 × 10⁻⁶) ÷ (0.30)² = 2.00 × 10⁵ N/C
- Compare.
The distance went up 3 times, so the field fell to 1/9.
1.80 × 10⁶ ÷ (2.00 × 10⁵) = 9.0
- Say what happens in the plates.
The field between parallel plates is uniform. The arrows are parallel and evenly spaced, so E is the same everywhere.
E constant, so a is constant
- Say what happens to the kinetic energy.
In both fields the object is pushed along its path. It loses electric potential energy and gains the same amount of kinetic energy.
Ek increases in both
Why this works. A point charge has a radial field that gets weaker with distance. Parallel plates have a uniform field that is the same at every point between them. A charge in a weaker field feels a smaller force.
Check your answer. In field 1 the object is pushed away from the source, so it ends where the field is weakest. Its acceleration should be getting smaller, but it should still be speeding up.
Common mistake. Saying the object slows down when its acceleration decreases. A smaller acceleration in the same direction still adds speed.
Answer: Point charge: the acceleration decreases, and the object keeps speeding up. Plates: the acceleration is constant. In both cases the kinetic energy increases.
Question typeFind the field between plates, then the voltage for a new field
Use this when: The question gives a voltage and a gap and asks for the field. Then it asks what voltage gives a different field with the same gap.
Method slide in the lesson: “Method: how to solve a parallel-plate problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. Parallel plates are 0.0200 m apart and are connected to a 160 V battery. Find the electric field strength between them. Then find the battery voltage that would give a field 2.5 times as strong with the same gap.
- Choose the equation for plates.
The field is uniform, so use E = ΔV/Δd. Here ΔV is the potential difference between the plates, Δd is the gap and E is the field. The point-charge equation E = kQ/r² (Q is the source charge, r is the distance from it) is for one small charge, not for plates.
E = ΔV ÷ Δd
- Find the field.
Divide the voltage by the gap. Keep the unit.
E = 160 V ÷ 0.0200 m = 8000 V/m
- Find the new field.
Multiply by 2.5.
E new = 2.5 × 8000 = 2.00 × 10⁴ V/m
- Rearrange for the voltage.
Multiply both sides by Δd.
ΔV = EΔd
- Find the voltage.
The gap is the same, 0.0200 m.
ΔV = (2.00 × 10⁴ V/m)(0.0200 m) = 400 V
Why this works. The field between plates depends on the voltage and the gap. More voltage makes a stronger field, and a smaller gap makes a stronger field. The units V/m and N/C are the same thing.
Check your answer. With the same gap, a field 2.5 times as strong needs 2.5 times the voltage. 2.5 × 160 V is 400 V.
Common mistake. Using E = kQ/r² for plates. That equation is only for a point source.
Answer: E = 8000 V/m; ΔV = 400 V
Question typeRead the slope of a graph of E against 1/Δd
Use this when: The battery stays the same and the gap is changed. The field is graphed against 1/Δd and the question asks what the slope is.
Example. The battery voltage is kept the same while the gap Δd between two plates is changed. A graph of field strength E (vertical axis) against 1/Δd (horizontal axis) is a straight line. It passes through C = (20.0 m⁻¹, 3.0 × 10³ V/m) and D = (80.0 m⁻¹, 12.0 × 10³ V/m). What does the slope represent? What is its value?
- Rewrite the equation.
Write E = ΔV/Δd as E = ΔV × (1/Δd).
E = ΔV(1/Δd)
- Match it to y = mx.
y is E and x is 1/Δd. The number that multiplies x is the slope.
slope = ΔV
- Find the rise.
Take D minus C.
rise = 12.0 × 10³ − 3.0 × 10³ = 9000 V/m
- Find the run in the same order.
Take D minus C again.
run = 80.0 − 20.0 = 60.0 m⁻¹
- Divide.
The unit is (V/m) ÷ (1/m), which is V.
slope = 9000 ÷ 60.0 = 150 V
Why this works. E against Δd is a curve. Plotting E against 1/Δd straightens it. Then the slope is the number that multiplies 1/Δd, and that is the potential difference of the battery.
Check your answer. Check with point C. E × Δd = (3.0 × 10³)(1 ÷ 20.0) = 150 V, which matches the slope.
Common mistake. Reading the slope as a distance. The slope here is a voltage, because the equation is E = ΔV × (1/Δd).
Answer: The slope is the potential difference ΔV = 150 V.
Question typeFind the acceleration and the speed of a charge between plates
Use this when: A particle starts from rest between two plates. The question gives the voltage and the gap and asks for the acceleration and the final speed.
Method slide in the lesson: “Method: how to solve a parallel-plate problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. An alpha particle (q = 3.20 × 10⁻¹⁹ C, m = 6.65 × 10⁻²⁷ kg) starts from rest against the bottom plate. The plates are 0.0250 m apart with a potential difference of 200 V. Find its acceleration and its speed at the other plate.
- Find the field.
The acceleration needs a force, and the force needs the field. Here ΔV is the potential difference between the plates and Δd is the gap.
E = ΔV ÷ Δd = 200 ÷ 0.0250 = 8000 V/m
- Use force for the acceleration.
Newton’s second law says the net force is F = ma. From B4, the electric force is F = qE, where q is the particle’s charge. Only the electric force acts, so ma = qE.
a = qE ÷ m
- Calculate.
Use the alpha particle’s own charge and mass.
a = (3.20 × 10⁻¹⁹)(8000) ÷ (6.65 × 10⁻²⁷) = 3.85 × 10¹¹ m/s²
- Use energy for the speed.
The particle starts from rest, so the energy gained is all kinetic energy.
qΔV = ½mv²
- Calculate.
Double the energy, divide by the mass, take the square root.
v = √(2 × 3.20 × 10⁻¹⁹ × 200 ÷ (6.65 × 10⁻²⁷)) = 1.39 × 10⁵ m/s
Why this works. Force and energy are two tools for the same particle. Use force when you want the acceleration. Use energy when you want the speed. The acceleration is constant because the field is uniform.
Check your answer. Check with motion: v = √(2aΔd) = √(2 × 3.85 × 10¹¹ × 0.0250) = 1.39 × 10⁵ m/s. The two routes agree.
Common mistake. Using the electron mass or charge. Use the numbers given for the particle in the question.
Answer: a = 3.85 × 10¹¹ m/s²; v = 1.39 × 10⁵ m/s
Question typeFind the speed when the field is given and not the voltage
Use this when: The question gives a field and a gap. The speed recipe needs a voltage, so you have a step to do first.
Method slide in the lesson: “Method: how to solve a parallel-plate problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. An electron starts from rest in a uniform field of 3.50 × 10³ V/m. The plates are 0.0400 m apart. Use q = 1.60 × 10⁻¹⁹ C and m = 9.11 × 10⁻³¹ kg. Find its speed at the other plate.
- Write down what you have.
You have a field and a gap. The speed equation needs a voltage.
E and Δd given; need ΔV
- Find the voltage.
Multiply both sides of E = ΔV/Δd by Δd. That gives ΔV = EΔd.
ΔV = (3.50 × 10³ V/m)(0.0400 m) = 140 V
- Use energy.
It starts from rest. The energy gained is all kinetic energy.
qΔV = ½mv²
- Find the energy gained.
Multiply the charge by the voltage.
qΔV = (1.60 × 10⁻¹⁹)(140) = 2.24 × 10⁻¹⁷ J
- Solve for the speed.
Double the energy, divide by the mass, take the square root.
v = √(2 × 2.24 × 10⁻¹⁷ ÷ (9.11 × 10⁻³¹)) = 7.01 × 10⁶ m/s
- Check the size.
It must be well below the speed of light, 3 × 10⁸ m/s.
7.01 × 10⁶ m/s is about 2% of that
Why this works. The field and the gap together tell you the voltage across the gap, ΔV = EΔd. Once you have the voltage, the energy method works as before.
Check your answer. The same electron would get a faster speed from a stronger field or a longer gap, because both give a bigger voltage.
Common mistake. Putting E straight into the speed equation as if it were a voltage. Convert to ΔV first.
Answer: 7.01 × 10⁶ m/s
Question typeFind the speed of a charge that enters the gap already moving
Use this when: A particle enters between the plates with a speed, and the plate pulls it forward. The question gives the field and the gap.
Method slide in the lesson: “Method: how to solve a parallel-plate problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. An electron enters the gap at 1.50 × 10⁶ m/s moving toward the positive plate. The field is 2.50 × 10³ V/m and the gap is 0.0400 m. Use q = 1.60 × 10⁻¹⁹ C and m = 9.11 × 10⁻³¹ kg. Find its speed at the positive plate.
- Find the voltage.
The field and the gap give the voltage across the gap.
ΔV = EΔd = (2.50 × 10³)(0.0400) = 100 V
- Find the initial kinetic energy.
The electron enters at 1.50 × 10⁶ m/s, so this is not zero.
Ek initial = ½(9.11 × 10⁻³¹)(1.50 × 10⁶)² = 1.02 × 10⁻¹⁸ J
- Find the energy gained.
The positive plate attracts the electron, so it gains energy.
qΔV = (1.60 × 10⁻¹⁹)(100) = 1.60 × 10⁻¹⁷ J
- Add them.
Write Ek final = Ek initial + qΔV. Final energy is what it had plus what it gained.
Ek final = 1.70 × 10⁻¹⁷ J
- Solve for the speed.
Double the energy, divide by the mass, take the square root.
v = √(2 × 1.70 × 10⁻¹⁷ ÷ (9.11 × 10⁻³¹)) = 6.11 × 10⁶ m/s
- Run the sense check.
The electron is sped up, so it must end faster than it began.
6.11 × 10⁶ m/s is greater than 1.50 × 10⁶ m/s
Why this works. The energy gained from the field is added to the energy the particle already has. The speed is found from the total.
Check your answer. If you had dropped the initial energy, you would get a speed that is smaller than the entry speed. That would be a sign of a slip.
Common mistake. Leaving out the initial kinetic energy. Watch for the words "enters at" in the question.
Answer: 6.11 × 10⁶ m/s
Question typeFind the speed of a charge that is slowed down
Use this when: The plate pushes back on the particle. The question asks for its speed at the plate.
Method slide in the lesson: “Method: how to solve a parallel-plate problem”. Its numbered steps give the order; the steps below add the reason for each.
Example. A proton enters the gap moving at 5.0 × 10⁵ m/s toward the positive plate. The potential difference is 300 V. Use q = 1.60 × 10⁻¹⁹ C and m = 1.67 × 10⁻²⁷ kg. Find its speed at the positive plate, and say how you know the answer makes sense.
- Decide if the energy goes up or down.
The positive plate repels a positive proton. The field takes energy away from it.
the proton loses energy
- Find the initial kinetic energy.
Use ½mv² with the proton mass.
Ek initial = ½(1.67 × 10⁻²⁷)(5.0 × 10⁵)² = 2.09 × 10⁻¹⁶ J
- Find the energy lost.
The size is qΔV.
qΔV = (1.60 × 10⁻¹⁹)(300) = 4.80 × 10⁻¹⁷ J
- Subtract.
The proton keeps what is left.
Ek final = 2.09 × 10⁻¹⁶ − 4.80 × 10⁻¹⁷ = 1.61 × 10⁻¹⁶ J
- Solve for the speed.
Double the energy, divide by the mass, take the square root.
v = √(2 × 1.61 × 10⁻¹⁶ ÷ (1.67 × 10⁻²⁷)) = 4.39 × 10⁵ m/s
- Run the sense check.
A repelled charge must slow down.
4.39 × 10⁵ m/s is less than 5.0 × 10⁵ m/s
Why this works. If a charge moves against the push of the field, the field takes energy from it. The loss is qΔV. Write Ek final = Ek initial − qΔV, with the energy lost subtracted.
Check your answer. The final energy must still be positive. If the energy lost were larger than the energy it started with, the proton would stop before reaching the plate.
Common mistake. Adding the energy when the plate repels the particle. Use the types of charge to decide whether the energy goes up or down.
Answer: 4.39 × 10⁵ m/s, which is less than the entry speed
Diploma-style questions
Try each question first. Then open the worked solution.
Multiple choice · outcome 30-B2.5kThe electric field between two parallel plates is E. The potential difference is tripled and the gap between the plates is doubled. What is the new field?
- A. 1.5E
- B. 6E
- C. 0.67E
- D. 5E
Show the worked solution (try the question first)
- Write the equation.
The field between plates is voltage over gap.
E = ΔV ÷ Δd
- Put in the changes.
The top is multiplied by 3 and the bottom is multiplied by 2.
E new = (3ΔV) ÷ (2Δd)
- Simplify.
Three over two is 1.5.
E new = 1.5 E
Why each choice is right or wrong
- A. Correct. The voltage is in the top of E = ΔV/Δd and the gap is in the bottom. 3 ÷ 2 = 1.5.
- B. This multiplies the two changes. The gap is in the bottom of the fraction, so it divides.
- C. This divides 2 by 3. The voltage change goes on top.
- D. This adds the two changes. Equations like this multiply and divide.
Answer: A
Numerical response · outcome 30-B2.9kA proton starts from rest between parallel plates that are 0.0125 m apart. The potential difference is 250 V. Use q = 1.60 × 10⁻¹⁹ C and m = 1.67 × 10⁻²⁷ kg. Find the magnitude of its acceleration. Record your answer as a.bc × 10ⁿ m/s². Enter the digits a, b, c, and then n.
Show the worked solution (try the question first)
- Find the field.
The question gives a voltage and a gap, not a field.
E = ΔV ÷ Δd = 250 ÷ 0.0125 = 2.00 × 10⁴ V/m
- Find the force.
Use F = qE. This is the net force.
F = (1.60 × 10⁻¹⁹)(2.00 × 10⁴) = 3.20 × 10⁻¹⁵ N
- Find the acceleration.
Divide by the proton mass.
a = 3.20 × 10⁻¹⁵ ÷ (1.67 × 10⁻²⁷) = 1.92 × 10¹² m/s²
- Enter the digits.
a, b, c are 1, 9, 2 and n is 12.
record 1 9 2 12
Answer: 1.92 × 10¹² m/s². Record 1 9 2 12.
Multiple choice · outcome 30-B2.3sThe battery connected to two parallel plates is kept the same. The gap Δd between the plates is changed, and the field E between them is measured each time. Which statement describes the graph of E against Δd?
- A. A straight line through the origin with slope ΔV
- B. A horizontal straight line, because the voltage is constant
- C. A curve that falls as Δd increases
- D. A straight line with a negative slope
Show the worked solution (try the question first)
- Write the equation.
E = ΔV/Δd, and ΔV is constant.
E = ΔV ÷ Δd
- Describe the graph.
E is inversely proportional to Δd. When Δd goes up, E goes down, and it never reaches zero.
a falling curve
- Choose the statement.
A straight line is only found if E is plotted against 1/Δd.
choice C
Why each choice is right or wrong
- A. This would be the graph of E against 1/Δd. This graph has Δd on the horizontal axis.
- B. The voltage is constant, but the field also depends on the gap, so E is not constant.
- C. Correct. E = ΔV ÷ Δd means E falls as Δd increases, and the graph is a curve.
- D. A negative slope that is straight would mean E reaches zero at a finite gap. Dividing by Δd gives a curve.
Answer: C