B7 · Fields between plates · Notes and practice

Download the printable PDF

Use E = ΔV/Δd between parallel plates and find force, acceleration and speed of a charge.

Open the complete lesson

Method slides in this lesson: “Method: how to solve a parallel-plate problem”. Worked examples for each question type in B7

After the lesson: Investigate and connect (a short investigation, a data step and a real-world link)

Type in the blanks; your notes save on this device only. Nothing is submitted.

Slide 1 of 5 · Radial and uniform fields

Key ideas

A field is a region where a feels a force. The arrows show the force on a test charge.

Around a point charge the field is : arrows point a positive source and a negative one. Closer in, the arrows bunch up: a field. The direction changes from place to place.

Between parallel plates the field is (constant): parallel, evenly spaced arrows, the same at R, at S and between. The arrows point from the plate to the plate.

The force on a charge is F = , and F = ma links it to the acceleration. If E does not change along the path, neither does the .

Example

A small positive object is released from rest in each of two fields, a point-charge field (positive source) and the uniform field between plates, and nothing else acts on it. In each field, does its acceleration increase, decrease or stay the same as it moves, and what happens to its kinetic energy?

Try it

Describe the direction and spacing of the field arrows (a) around a negative point charge and (b) between two plates when the top plate is positive. Sketch both.

Slide 2 of 5 · The field between plates

Key ideas

A uniform field is the same everywhere between plates. A bigger or a smaller makes a field.

Formula: E = . E is the field strength, in (size only). ΔV is the potential difference between the plates, in . Δd is the gap between the plates, in .

Direction: from the plate to the plate. V/m and are the same unit. Multiply both sides by Δd: ΔV = .

Plates only. For one use E = kQ/r², where Q is the source charge and r is the distance from it. Write each rearranged form out.

On a graph of E against 1/Δd, E = ΔV × (1/Δd) matches y = mx: y is , x is and the slope is . Rewrite the equation to match y = mx first.

Example

Plates are 0.0150 m apart and connected to a 120 V battery. Find the field strength between the plates, then find the battery voltage needed for a field three times as strong with the same gap.

Try it

The battery voltage is kept the same while the plate gap is changed. The field is graphed against 1/Δd. The line passes through C = (25 m⁻¹, 4.5 × 10³ V/m) and D = (100 m⁻¹, 18.0 × 10³ V/m). What does the slope represent, and what is its value?

Slide 3 of 5 · Force, acceleration and speed between plates

Key ideas

Force gives . Energy gives . Only the electric force acts, so ma = . From B4: F = qE, where q is the particle’s charge.

Field: E = . Acceleration: a = . Speed from rest: qΔV = , so v = . The field is uniform, so a is .

If the question gives E and not ΔV, find ΔV = first. Use the electron’s charge and mass from the data sheet. Keep every digit on your calculator and round .

Use the particle’s own q and m. A proton has the same size of charge as an electron but a much bigger . Two routes that agree are a good check. A speed stays well below .

Example

An electron (q = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) starts from rest in a uniform field of 4.00 × 10³ V/m. The plates are 0.0600 m apart. Find the final speed of the electron at the other plate.

Try it

A proton (q = 1.60 × 10⁻¹⁹ C, m = 1.67 × 10⁻²⁷ kg) starts from rest against the positive plate. The plates are 0.0150 m apart and the voltage is 300 V. Find its final speed using energy, then check the speed using the acceleration and the gap.

Slide 4 of 5 · Method: parallel-plate problems

Key ideas

Step 1: find the field. E = , with the gap in .

Step 2: find the field direction. It points from the plate to the plate.

Step 3: find the force. F = , using the size of q. A positive charge is pushed the field. A negative charge is pushed it.

Step 4: find the acceleration. a = , in the same direction as the force. Step 5: find the speed. From rest, qΔV = , or check with v = . Check: a speed stays well below .

Example

An alpha particle (q = 3.20 × 10⁻¹⁹ C, m = 6.65 × 10⁻²⁷ kg) starts from rest against the positive plate. The gap is 0.0200 m and the battery is 175 V. Find its acceleration and its speed at the other plate.

Try it

An electron (q = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) starts from rest against the negative plate. The gap is 0.0300 m and the battery is 450 V. Find its acceleration and its speed at the other plate. Write each step number beside your work.

Slide 5 of 5 · Not starting from rest

Key ideas

If a particle is already moving when it enters (look for “”), it has initial kinetic energy ½mv_i², and the field adds more or takes some away.

Find ΔV = . Find the initial kinetic energy from the entering speed. Find the energy gained or lost: .

An electron moving toward the + plate: unlike charges , so it . Ek final = Ek initial . A proton moving toward the + plate: like charges , so it . Ek final = Ek initial .

Then v_f = . Check: a charge that speeds up ends , and a slowed charge ends , than its starting speed.

Example

An electron (q = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) enters the gap at 2.00 × 10⁶ m/s toward the positive plate. The field is 3.00 × 10³ V/m and the gap is 0.0500 m. Find its speed at the positive plate.

Try it

A proton (q = 1.60 × 10⁻¹⁹ C, m = 1.67 × 10⁻²⁷ kg) enters the gap moving at 4.0 × 10⁵ m/s toward the positive plate, which repels it. The potential difference is 400 V. Find its speed at the positive plate, and say how you know the answer makes sense.

Answer the practice problems online · Completed notes and worked key

B7-N01

B7-N01. Two parallel plates 0.0300 m apart are connected to a 150 V battery. Find the electric field strength between them in V/m.

Response: ____________________

B7-N02

B7-N02. The gap between two plates is halved while the battery voltage stays the same. What happens to the field strength between them?

  1. It doubles.
  2. It halves.
  3. It stays the same.
  4. It becomes four times larger.

Response: ____________________

B7-N03

B7-N03. A positive charge is released from rest at different places between large parallel plates. How does its acceleration compare from place to place?

  1. It is larger near the positive plate.
  2. It is larger near the negative plate.
  3. It increases as the charge speeds up.
  4. It is the same everywhere, because the field is uniform.

Response: ____________________

B7-N04

B7-N04. An electron starts from rest in a uniform field of 2500 V/m across plates 0.08 m apart. Find its final speed.

Response: ____________________

B7-N05

B7-N05. A proton starts at rest between plates 0.0400 m apart with a potential difference of 800 V. Use e = 1.60 × 10⁻¹⁹ C and proton mass mp = 1.67 × 10⁻²⁷ kg. Find its acceleration in m/s².

Response: ____________________

B7-N06

B7-N06. Using the proton in the previous question, find its final speed when it reaches the far plate.

Response: ____________________

B7-N07

B7-N07. An electron enters the gap at 1.0 × 10⁶ m/s toward the positive plate. The plates are 0.020 m apart with 3.0 × 10³ V across them. Find its speed at the positive plate.

Response: ____________________

B7-N08

B7-N08. A graph of E against 1/Δd for a fixed battery is a straight line through the origin with slope 150 V. What does the slope represent, and what happens to E if the gap is doubled?

Response: ____________________