B14 · Worked examples
These questions put a wire with a current in a magnetic field. You find the direction of the force, its size, how it balances gravity, or what a graph of the force tells you.
Open the B14 lesson · B14 notes and practice
Method slides in this lesson: “Method: how to choose the tool for a wire in a field”. Find them in the lesson slides, with the steps for each skill in one place.
Worked question types
Each example shows every step, why you do it, and the idea behind it.
Question typeFind the direction of the force on a wire
Use this when: The question gives the direction of the current and the magnetic field and asks which way the wire is pushed.
Method slide in the lesson: “Method: how to choose the tool for a wire in a field”. Its numbered steps give the order; the steps below add the reason for each.
Example. A wire in the plane of the page carries conventional current up the page. A uniform magnetic field points into the page. Which way is the magnetic force on the wire?
- Use conventional current.
The right-hand rule for a wire uses conventional current, which points the way positive charge would move.
current: up the page
- Place the right hand.
Point the fingers along the magnetic field and the thumb along the conventional current. The force comes out of the palm.
fingers into the page, thumb up
- Read the palm.
With the fingers pointing away from you and the thumb up, the palm faces left.
palm faces left
- Write the answer.
The force on the wire is the direction of the palm.
force: to the left
Why this works. A wire carries many moving charges, and each one feels the force in the same direction. So the whole wire is pushed. It is the same right-hand rule as for a single charge.
Check your answer. Reverse the field and check. With the field out of the page the force would be to the right. Reversing the field reverses the force.
Common mistake. Using the left hand, or pointing the thumb along the electron flow and using the palm. The force then comes out reversed.
Answer: The force on the wire is to the left.
Question typeFind the direction of the force when electrons carry the current
Use this when: The question says the electrons move in a certain direction, rather than giving the current direction.
Method slide in the lesson: “Method: how to choose the tool for a wire in a field”. Its numbered steps give the order; the steps below add the reason for each.
Example. A horizontal wire in the plane of the page has electrons moving to the left. A uniform magnetic field points up the page. Is the magnetic force on the wire into the page or out of the page?
- Change to conventional current.
Electrons are negative. Conventional current points the opposite way to the electron flow.
electrons left, so conventional current right
- Place the right hand.
Fingers along the field, thumb along the conventional current. The force comes out of the palm.
fingers up the page, thumb right
- Read the palm.
The palm faces toward you, which is out of the page.
palm faces out of the page
- Check with electron flow.
You can also put the thumb along the electron flow and read the back of the hand instead of the palm. Fingers up, thumb left (along the electrons), and the back of the hand faces out of the page.
same answer: out of the page
Why this works. The force depends on the direction positive charge would move. A flow of electrons to the left has the same effect as positive charge moving to the right.
Check your answer. Both methods give out of the page. If they disagree, one of them used the wrong hand or the wrong current direction.
Common mistake. Putting the electron direction on the thumb and reading the palm. That reverses the force.
Answer: The force on the wire is out of the page.
Question typeFind the force from the charge that passes and the time
Use this when: The question gives the charge that passes a point in a certain time, instead of the current.
Method slide in the lesson: “Method: how to choose the tool for a wire in a field”. Its numbered steps give the order; the steps below add the reason for each.
Example. In a wire, 24 C of charge pass a point in 5.0 s. A 0.150 m length of the wire is at right angles to a uniform magnetic field of 0.300 T. Find the current and the size of the magnetic force on the wire.
- Find the current.
Current is charge per second. One ampere is one coulomb each second.
I = q ÷ t = 24 ÷ 5.0 = 4.80 A
- Write the force equation.
The wire is at right angles to the field, so the force is the product of the three.
F = ILB
- Substitute.
Use amperes, metres and tesla. These give newtons.
F = (4.80)(0.150)(0.300) = 0.216 N
Why this works. More current means more charge moving. More length in the field means more charge in the field. A stronger field means more force on each charge. The three effects multiply.
Check your answer. A few amperes in a 15 cm wire in a field of 0.3 T gives a force of a fraction of a newton. That is sensible.
Common mistake. Using the current in milliamperes, or forgetting to find the current first.
Answer: I = 4.80 A and F = 0.216 N
Question typeFind the force when the wire is slanted or only part of it is in the field
Use this when: The wire is at an angle to the field, or only part of its length is inside the field.
Method slide in the lesson: “Method: how to choose the tool for a wire in a field”. Its numbered steps give the order; the steps below add the reason for each.
Example. A straight wire 0.80 m long carries 8.0 A. Only 0.25 m of the wire is inside a uniform field of 0.400 T. That part makes an angle of 40° with the field direction. Find the size of the magnetic force on the wire.
- Choose the length that counts.
Only the part of the wire that is inside the field feels a force. The 0.80 m total is not used.
L = 0.25 m
- Find the part across the field.
Only the part of the length across the field counts, just as only the part of the velocity across the field counted in B11. θ is the angle between the wire and the field, and this part is L sin θ.
L sin θ = (0.25) sin 40° = 0.1607 m
- Substitute into F = ILB.
Use the across-the-field length.
F = (8.0)(0.25)(0.400) sin 40° = 0.514 N
Why this works. Only the part of the wire across the field is pushed. A wire along the field has zero force, because sin 0° = 0, just like a charge moving along the field. A wire at right angles has the most force.
Check your answer. The force must be less than ILB for the full right-angle case, which is 0.800 N. The result 0.514 N is less, as it should be.
Common mistake. Using the whole wire length, 0.80 m. Also using cos 40° where sin 40° belongs. The angle is measured from the field.
Answer: F = 0.514 N
Question typeFind the net force on a wire when gravity also acts
Use this when: A wire in a horizontal field has a magnetic force and a force of gravity. The question asks for the net force.
Method slide in the lesson: “Method: how to choose the tool for a wire in a field”. Its numbered steps give the order; the steps below add the reason for each.
Example. A horizontal wire carries 3.0 A toward you. A horizontal magnetic field of 0.0600 T points to the right across the page. The part of the wire in the field is 0.0800 m long and the mass of the wire is 0.90 g. Find the size and direction of the net force on the wire.
- Find the magnetic force direction.
Fingers right, thumb toward you, and the palm faces up.
magnetic force: up
- Find the magnetic force size.
Use F = ILB.
F = (3.0)(0.0800)(0.0600) = 0.0144 N, up
- Change grams to kilograms.
Divide by 1000 before using g = 9.81 N/kg (the same as 9.81 m/s²).
m = 0.90 g = 0.90 × 10⁻³ kg
- Find the force of gravity.
Use F = mg. It points down.
F = (0.90 × 10⁻³)(9.81) = 8.83 × 10⁻³ N, down
- Subtract.
The forces are opposite. Subtract the smaller from the larger. The net force points the way of the larger.
F net = 0.0144 − 8.83 × 10⁻³ = 5.57 × 10⁻³ N, up
Why this works. The wire has two forces on it at once. Find each one with its direction, then add them as vectors. Opposite forces subtract.
Check your answer. The magnetic force is a little larger than the weight, so the net force is small and points up.
Common mistake. Leaving the mass in grams. Also adding the two forces when they point opposite ways.
Answer: The net force is 5.57 × 10⁻³ N, up.
Question typeFind the current that makes a wire hang still
Use this when: The wire hangs motionless in the field. The question asks for the current.
Method slide in the lesson: “Method: how to choose the tool for a wire in a field”. Its numbered steps give the order; the steps below add the reason for each.
Example. A horizontal wire hangs still in a horizontal magnetic field of 0.0400 T. The magnetic force on the wire is up. The part of the wire in the field is 0.0750 m long and the mass of the wire is 2.20 g. What current is needed?
- Use the fact that the wire is still.
It is not accelerating, so the net force is zero. The upward magnetic force equals the downward force of gravity in size.
ILB = mg
- Solve for the current.
Divide both sides by L and B.
I = mg ÷ (LB)
- Change grams to kilograms.
Use kilograms with g = 9.81 N/kg.
m = 2.20 × 10⁻³ kg
- Substitute.
Put the bottom in brackets so you divide by both L and B.
I = (2.20 × 10⁻³)(9.81) ÷ [(0.0750)(0.0400)] = 7.19 A
Why this works. A wire that is not moving can still have forces on it. They balance. The magnetic force and gravity are equal in size and opposite in direction, so the net force is zero.
Check your answer. Put the current back in. ILB = (7.19)(0.0750)(0.0400) = 0.0216 N, and mg = 0.0216 N. They match.
Common mistake. Writing the balance as equal vectors. The forces point opposite ways, so only their sizes are equal.
Answer: I = 7.19 A
Question typeRead the field strength and the mass from a force graph
Use this when: A graph of force against current has a line of best fit that does not start at zero. The question asks for the field strength or the mass.
Example. A wire sits on a balance in a magnetic field. The balance reads the magnetic force plus the weight of the wire and its supports. A line of best fit for the reading F against the current I passes through P = (1.00 A, 0.452 N) and Q = (5.00 A, 0.740 N). The length of wire in the field is 0.150 m. Find the field strength and the mass of the wire and supports.
- Match the equation to y = (slope)x + (intercept).
The reading is F = ILB + mg. The current I is on the horizontal axis. So the slope is LB and the intercept is mg.
slope = LB intercept = mg
- Find the slope.
Choose two points that lie on the line, far apart. They need not be data points. Rise over run.
slope = (0.740 − 0.452) ÷ (5.00 − 1.00) = 0.0720 N per A
- Find the field strength.
The slope is LB, so divide by L.
B = 0.0720 ÷ 0.150 = 0.480 T
- Find the intercept.
Put point P into F = (slope)I + b and solve for b.
b = 0.452 − (0.0720)(1.00) = 0.380 N
- Find the mass.
The intercept is mg, the weight when the current is zero.
m = 0.380 ÷ 9.81 = 0.0387 kg
Why this works. The line does not start at zero because gravity always pulls down on the wire and its supports. The slope shows how fast the force grows with current. The intercept shows the weight.
Check your answer. Use the other point to check the intercept. b = 0.740 − (0.0720)(5.00) = 0.380 N. It matches.
Common mistake. Using F = ILB for a reading, which leaves out the weight. Also taking the slope to be B instead of LB.
Answer: B = 0.480 T and m = 0.0387 kg
Question typeDecide if two parallel wires attract or repel
Use this when: Two wires carry currents near each other. The question asks if they attract or repel, or which way the force on one wire points.
Example. Two long straight wires are parallel. Wire A carries conventional current down the page. Wire B is to the left of A and also carries conventional current down the page. Do the wires attract or repel? Which way is the force on B?
- Find the field of A at wire B.
Grip wire A with your right thumb pointing down, along its current. On the left side of the wire the fingers point into the page.
at B the field points into the page
- Find the force on B.
Wire B sits in this field. Fingers into the page, thumb down along B’s current, and the palm faces right.
force on B: to the right
- Say attract or repel.
A is on the right of B. The force on B points to the right, toward A.
attract
- Find the force on A.
The two forces are equal in size and opposite in direction, as in Newton’s third law.
force on A: to the left, toward B
Why this works. Each wire makes a field, and each wire sits in the field of the other. Do it in two steps: the field first, then the force. Currents in the same direction attract. Currents in opposite directions repel.
Check your answer. Reverse one current and both forces reverse. Then the wires repel. The rule has to give both.
Common mistake. Expecting like currents to repel because like poles repel. Also doing only one of the two right-hand rules.
Answer: The wires attract. The force on B is to the right, toward A.
Diploma-style questions
Try each question first. Then open the worked solution.
Multiple choice · outcome 30-B3.8kA straight wire is at right angles to a uniform magnetic field. The magnetic force on the wire is F. The current is tripled and the length of wire inside the field is halved. What is the new magnetic force?
- A. 0.5 F
- B. 1.5 F
- C. 3 F
- D. 6 F
Show the worked solution (try the question first)
- Write the equation.
F = ILB. The force is the product of the current, the length and the field.
F = ILB
- Apply each change.
Tripling I multiplies the force by 3. Halving L multiplies it by ½.
3 × ½ = 1.5
- Write the new force.
The force is multiplied by 1.5.
new force = 1.5 F
Why each choice is right or wrong
- A. This forgets the tripled current. Only the halved length is counted.
- B. Correct. The changes multiply: 3 × ½ = 1.5.
- C. This forgets the halved length. Only the tripled current is counted.
- D. This multiplies by 2 instead of by ½. Halving the length makes the force smaller.
Answer: B
Numerical response · outcome 30-B3.8k and 30-B3.7kA straight wire hangs motionless in a horizontal magnetic field of 0.0500 T. The magnetic force on the wire points up. The length of wire inside the field is 0.120 m and the mass of the wire is 2.40 g. What current is in the wire? Record your answer as a.bc × 10ⁿ A. Enter the digits a, b, c, and then n.
Show the worked solution (try the question first)
- Use the fact that the wire is still.
The net force is zero. The magnetic force equals the force of gravity in size.
ILB = mg
- Solve for the current.
Divide by L and B.
I = mg ÷ (LB)
- Substitute in SI units.
Change 2.40 g to 2.40 × 10⁻³ kg.
I = (2.40 × 10⁻³)(9.81) ÷ [(0.120)(0.0500)] = 3.92 A
- Enter the digits.
a, b, c are 3, 9, 2, and n is 0.
record 3 9 2 0
Answer: 3.92 A. Record 3 9 2 0.
Multiple choice · outcome 30-B3.8kTwo long parallel wires carry conventional currents in opposite directions. Which statement is correct?
- A. The wires attract, and the forces are equal in size.
- B. The wires repel, and the forces are equal in size and opposite in direction.
- C. The wires repel, and the wire with the larger current feels the larger force.
- D. There is no force, because the currents cancel.
Show the worked solution (try the question first)
- Find the field of one wire at the other.
Take wire A with current up and wire B to its right with current down. A’s field at B is into the page.
field at B: into the page
- Find the force on B.
Fingers into the page, thumb down, palm faces right. B is pushed away from A.
force on B: right, away from A
- Compare the two forces.
The force on A is equal in size and opposite in direction, like Newton’s third law pair.
wires repel
Why each choice is right or wrong
- A. Currents in the same direction attract. Opposite currents repel.
- B. Correct. Opposite currents repel, and the two forces are an equal and opposite pair.
- C. The two forces are equal in size, even when the currents are different. Each wire is in the other wire’s field, and the forces match like a third-law pair.
- D. The currents do not cancel. Each wire has its own field, and each wire feels a force from the other.
Answer: B