B13 · Worked examples

These questions put an electric field and a magnetic field on a charged particle at the same time. You add two forces, or you use the straight-path condition v = E/B.

Open the B13 lesson · B13 notes and practice

Method slides in this lesson: “Method: how to solve a balance-of-forces problem”. Find them in the lesson slides, with the steps for each skill in one place.

Worked question types

Each example shows every step, why you do it, and the idea behind it.

Question type

Find the net force and acceleration when the two forces are opposite

Use this when: A particle enters a region with both an electric field and a magnetic field. The question asks for the acceleration at the moment it enters.

Method slide in the lesson: “Method: how to solve a balance-of-forces problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. An electron moves to the right at 2.0 × 10⁵ m/s between two horizontal plates. The top plate is positive, and the electric field is 400 N/C. A uniform magnetic field of 3.0 × 10⁻³ T points into the page. Find the size and direction of the electron’s acceleration as it enters.
  1. Find the electric force.

    Use F = qE for the size. Use the size of q, with no sign.

    F = (1.60 × 10⁻¹⁹)(400) = 6.40 × 10⁻¹⁷ N

  2. Find its direction.

    The top plate is positive, so the field points down. The electron is negative, so the force on it is up.

    electric force: up

  3. Find the magnetic force.

    Use F = qvB for the size. Here v is the speed and B is the magnetic field, and v is at right angles to B.

    F = (1.60 × 10⁻¹⁹)(2.0 × 10⁵)(3.0 × 10⁻³) = 9.60 × 10⁻¹⁷ N

  4. Find its direction.

    Fingers into the page and thumb right give a palm facing up. That is for a positive charge. The electron is negative, so the force is down.

    magnetic force: down

  5. Add the forces as vectors.

    F net means the net force. The forces are opposite. Subtract the smaller from the larger. The net force points the way of the larger.

    F net = 9.60 × 10⁻¹⁷ − 6.40 × 10⁻¹⁷ = 3.20 × 10⁻¹⁷ N, down

  6. Find the acceleration.

    Use a = F ÷ m. The acceleration points the same way as the net force.

    a = 3.20 × 10⁻¹⁷ ÷ (9.11 × 10⁻³¹) = 3.51 × 10¹³ m/s², down

Why this works. Each field gives its own force. Forces are vectors, so the directions decide whether you add or subtract. The net force then gives the acceleration through a = F ÷ m.

Check your answer. The magnetic force is the larger one, so the net force points the way of the magnetic force: down.

Common mistake. Adding the two sizes when the forces point opposite ways. Also forgetting that the electron is negative in both the plate rule and the right-hand rule.

Answer: a = 3.51 × 10¹³ m/s², down

Question type

Find the net force and acceleration when the two forces point the same way

Use this when: The question reverses a field or the charge, so the two forces now point in the same direction.

Method slide in the lesson: “Method: how to solve a balance-of-forces problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. An electron moves right at 2.0 × 10⁵ m/s between two horizontal plates. The top plate is positive and the electric field is 400 N/C. A magnetic field of 3.0 × 10⁻³ T points out of the page. Find the size and direction of its acceleration as it enters.
  1. Keep the electric force.

    The plates are the same as before. The electric force is up.

    F = 6.40 × 10⁻¹⁷ N, up

  2. Reverse the magnetic force.

    Fingers out of the page and thumb right give a palm facing down for a positive charge. The electron is negative, so the force is up.

    F = 9.60 × 10⁻¹⁷ N, up

  3. Add the forces.

    Both forces are up. They are in the same direction, so add the sizes.

    F net = 6.40 × 10⁻¹⁷ + 9.60 × 10⁻¹⁷ = 1.60 × 10⁻¹⁶ N, up

  4. Find the acceleration.

    Use a = F ÷ m.

    a = 1.60 × 10⁻¹⁶ ÷ (9.11 × 10⁻³¹) = 1.76 × 10¹⁴ m/s², up

Why this works. Reversing only the magnetic field reverses only the magnetic force. The electric force stays the same. So the same sizes can add or subtract, depending on the directions.

Check your answer. The net force is larger than either force alone, as it should be when two forces point the same way.

Common mistake. Subtracting by habit. Check the directions first. Subtract only when the forces are opposite.

Answer: a = 1.76 × 10¹⁴ m/s², up

Question type

Find the speed that goes straight through a velocity selector

Use this when: The question says a particle goes straight through crossed electric and magnetic fields. It gives E and B and asks for the speed, or it asks whether a different particle also goes straight.

Method slide in the lesson: “Method: how to solve a balance-of-forces problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. In a velocity selector the electric field is 900 N/C and the magnetic field is 1.50 × 10⁻³ T. The fields and the velocity are at right angles to each other. What speed goes straight through? Does the answer change for a proton or an alpha particle?
  1. Use the straight path.

    A straight path means the net force is zero. So the electric and magnetic forces are equal in size and opposite in direction. The bars | | mean size only: ignore any minus sign. We compare sizes because the directions are opposite.

    |qE| = |qvB|

  2. Cancel the charge.

    The charge q is on both sides, so it cancels. This is why the mass and the charge do not matter.

    E = vB

  3. Solve for the speed.

    Divide by B. The unit works because 1 T = 1 N/(C·m/s), so N/C divided by T gives m/s.

    v = E ÷ B = 900 ÷ (1.50 × 10⁻³) = 6.00 × 10⁵ m/s

  4. Answer the second question.

    Neither the mass nor the charge is in v = E ÷ B. A proton or an alpha particle at this speed also goes straight through.

    same speed for any particle

Why this works. Only the speed decides if a particle goes straight. Faster particles feel a bigger magnetic force and bend one way. Slower particles feel a bigger electric force and bend the other way.

Check your answer. Check the forces for an electron. Electric: (1.60 × 10⁻¹⁹)(900) = 1.44 × 10⁻¹⁶ N. Magnetic: (1.60 × 10⁻¹⁹)(6.00 × 10⁵)(1.50 × 10⁻³) = 1.44 × 10⁻¹⁶ N. They match.

Common mistake. Forgetting the absolute values and writing the two force vectors as equal. They have equal sizes but opposite directions. Also thinking the mass matters.

Answer: v = 6.00 × 10⁵ m/s, for any mass or charge.

Question type

Find the electric field and the voltage a velocity selector needs

Use this when: The question gives the speed to select, the magnetic field and the plate spacing. It asks for the electric field or the potential difference across the plates.

Method slide in the lesson: “Method: how to solve a balance-of-forces problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. A velocity selector must pass particles at 3.0 × 10⁵ m/s. The magnetic field is 0.0400 T. The plates are 0.0150 m apart. What electric field and what potential difference between the plates are needed?
  1. Write the straight-path condition.

    The forces cancel when E = vB.

    E = vB

  2. Find the electric field.

    Multiply the speed by the field.

    E = (3.0 × 10⁵)(0.0400) = 1.20 × 10⁴ N/C

  3. Link the field to the plates.

    The field between plates is E = ΔV ÷ Δd from B7, where Δd is the distance between the plates, 0.0150 m here. Solve for ΔV.

    ΔV = E Δd

  4. Find the potential difference.

    Use the plate spacing in metres.

    ΔV = (1.20 × 10⁴)(0.0150) = 180 V

Why this works. This type joins two ideas. The straight-path condition gives the field, and the plate equation turns the field into a voltage you can set.

Check your answer. A field of a few thousand newtons per coulomb across plates 1.5 cm apart needs a few hundred volts. That is sensible.

Common mistake. Putting the spacing in centimetres, or using the speed as the voltage.

Answer: E = 1.20 × 10⁴ N/C and ΔV = 180 V

Question type

Decide which way a particle bends when it is too fast or too slow

Use this when: The particle’s speed is not E ÷ B. The question asks whether it still goes straight, and if not, which plate it bends toward.

Method slide in the lesson: “Method: how to solve a balance-of-forces problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. A proton moves right between horizontal plates. The top plate is positive and the electric field is 800 N/C. The magnetic field is 2.0 × 10⁻³ T and points into the page. The proton moves at 5.0 × 10⁵ m/s. Does it go straight? If not, which way does it bend?
  1. Find the straight-through speed.

    Use v = E ÷ B.

    v = 800 ÷ (2.0 × 10⁻³) = 4.00 × 10⁵ m/s

  2. Compare it with the proton’s speed.

    The proton is faster than the straight-through speed, so it will not go straight.

    5.0 × 10⁵ m/s > 4.00 × 10⁵ m/s

  3. Find the electric force.

    The field points down. The proton is positive, so the force is down.

    F = (1.60 × 10⁻¹⁹)(800) = 1.28 × 10⁻¹⁶ N, down

  4. Find the magnetic force.

    Fingers into the page, thumb right, palm up. The proton is positive, so the force is up.

    F = (1.60 × 10⁻¹⁹)(5.0 × 10⁵)(2.0 × 10⁻³) = 1.60 × 10⁻¹⁶ N, up

  5. Find the net force.

    The forces are opposite, so subtract. The net force points the way of the larger one.

    F net = 1.60 × 10⁻¹⁶ − 1.28 × 10⁻¹⁶ = 3.20 × 10⁻¹⁷ N, up

Why this works. The magnetic force qvB grows with speed. The electric force qE does not depend on speed. A faster particle is pushed by the magnetic force, and a slower one by the electric force.

Check your answer. A faster particle should bend the way of the magnetic force. The net force is up, which is the magnetic force direction.

Common mistake. Guessing the direction without finding both forces. Find each force and its direction, then compare the sizes.

Answer: No. The proton bends up, toward the top plate.

Question type

Accelerate from rest, then go straight through crossed fields

Use this when: A particle starts at rest, is accelerated through a potential difference, and then goes straight through a velocity selector. The question asks for the accelerating voltage.

Method slide in the lesson: “Method: how to solve a balance-of-forces problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. A proton starts at rest and is accelerated through a potential difference. It then enters crossed fields of E = 900 N/C and B = 3.0 × 10⁻³ T and goes straight through. What potential difference accelerated it?
  1. Use the straight path first.

    Going straight means the speed is E ÷ B. This gives the speed the proton must have.

    v = 900 ÷ (3.0 × 10⁻³) = 3.00 × 10⁵ m/s

  2. Use energy for the first stage.

    The potential energy qΔV became kinetic energy.

    qΔV = ½mv²

  3. Solve for the voltage.

    Divide by q.

    ΔV = mv² ÷ (2q)

  4. Substitute.

    Use the proton’s mass and charge.

    ΔV = (1.67 × 10⁻²⁷)(3.00 × 10⁵)² ÷ [2(1.60 × 10⁻¹⁹)] = 470 V

Why this works. The speed is the link again. The crossed fields tell you the speed. The energy equation turns that speed into the voltage that gave it.

Check your answer. A speed of 3 × 10⁵ m/s for a proton needs a few hundred volts. That matches.

Common mistake. Using ΔV = E ÷ B, or forgetting the square on the speed.

Answer: ΔV = 470 V

Question type

Read the cue and choose the first equation

Use this when: The question describes what the particle does and asks which equation or statement to start with. Or a longer problem has two cues in a row.

Method slide in the lesson: “Method: how to solve a balance-of-forces problem”. Its numbered steps give the order; the steps below add the reason for each.

Example. Write the first equation or statement you would use for each scenario. (1) An electron is accelerated from rest through 400 V and then moves on a circle in a magnetic field. (2) A proton passes straight through crossed electric and magnetic fields. (3) A positive ion moves along the direction of a magnetic field.
  1. Scenario 1: find the cue.

    “Accelerated from rest through a potential difference” is an energy cue. The electron gets kinetic energy from qΔV.

    first: qΔV = ½mv²

  2. Scenario 1: add the second cue.

    “Moves on a circle” means the magnetic force is the net force. Write this second, using the speed from the first step.

    second: qvB = mv²/r

  3. Scenario 2: find the cue.

    “Straight through” means the net force is zero. The electric and magnetic forces are equal in size.

    first: qE = qvB, so v = E ÷ B

  4. Scenario 3: find the cue.

    Along the field means the part of the velocity across the field is zero. There is no magnetic force.

    first: v⊥ = 0, so F = 0

Why this works. Do not hunt for a formula that fits the numbers. Read the cue first, write the equation that cue points to, and only then look at the numbers. When there are two cues, write one equation per cue in the order the particle meets them.

Check your answer. Each cue should match one idea: energy, circle, straight path or no force. If a step has no cue, you probably do not need it.

Common mistake. Picking an equation because the numbers look right. Also forgetting the zero cases: a particle at rest or moving along the field feels no magnetic force.

Answer: (1) qΔV = ½mv², then qvB = mv²/r. (2) qE = qvB. (3) The magnetic force is zero.

Diploma-style questions

Try each question first. Then open the worked solution.

Multiple choice · outcome 30-B3.5k
A proton goes straight through a velocity selector. The top plate is positive and the magnetic field points into the page. An alpha particle enters at the same speed. What does the alpha particle do?
  1. A. It bends toward the top plate.
  2. B. It bends toward the bottom plate.
  3. C. It goes straight through.
  4. D. It stops between the plates.
Show the worked solution (try the question first)
  1. Write the straight-path condition.

    The proton goes straight, so its speed satisfies qE = qvB. That gives v = E ÷ B.

    v = E ÷ B

  2. Check what is in the condition.

    The charge cancels, and the mass never appears. The condition depends only on the speed.

    no q or m

  3. Apply it to the alpha particle.

    The speed is the same, so the alpha particle’s two forces still cancel. Both forces are twice as big, but they stay equal.

    goes straight

Why each choice is right or wrong

  • A. It would bend only if the magnetic force were larger than the electric force. Both forces double, so they stay equal.
  • B. It would bend this way only if the electric force were larger. Both forces double, so they stay equal.
  • C. Correct. The condition v = E ÷ B does not involve the mass or the charge, so the same speed goes straight.
  • D. Nothing stops the particle. With a zero net force it keeps moving at the same velocity.

Answer: C

Numerical response · outcome 30-B3.5k and 30-B2.8k
An electron moves at 6.0 × 10⁵ m/s through a magnetic field of 1.50 × 10⁻³ T and an electric field of 600 N/C. The electric force and the magnetic force point in opposite directions. Find the size of the electron’s acceleration as it enters. Record your answer as a.bc × 10ⁿ m/s². Enter the digits a, b, c, and then n.
Show the worked solution (try the question first)
  1. Find the electric force.

    F = qE.

    F = (1.60 × 10⁻¹⁹)(600) = 9.60 × 10⁻¹⁷ N

  2. Find the magnetic force.

    F = qvB.

    F = (1.60 × 10⁻¹⁹)(6.0 × 10⁵)(1.50 × 10⁻³) = 1.44 × 10⁻¹⁶ N

  3. Subtract.

    The forces are opposite, so subtract the smaller from the larger.

    F net = 1.44 × 10⁻¹⁶ − 9.60 × 10⁻¹⁷ = 4.80 × 10⁻¹⁷ N

  4. Find the acceleration.

    a = F ÷ m.

    a = 4.80 × 10⁻¹⁷ ÷ (9.11 × 10⁻³¹) = 5.27 × 10¹³ m/s²

  5. Enter the digits.

    a, b, c are 5, 2, 7, and n is 13.

    record 5 2 7 13

Answer: 5.27 × 10¹³ m/s². Record 5 2 7 13.

Multiple choice · outcome 30-B3.5k
A velocity selector passes particles of speed v. Its electric field is E and its magnetic field is B. Which change lets particles with a larger speed go straight through?
  1. A. Increase E and keep B the same.
  2. B. Increase B and keep E the same.
  3. C. Decrease E and keep B the same.
  4. D. Use particles with twice the charge.
Show the worked solution (try the question first)
  1. Write the condition.

    The speed that goes straight is v = E ÷ B.

    v = E ÷ B

  2. Find what makes v larger.

    v gets larger when E on the top gets larger, or when B on the bottom gets smaller.

    E up, or B down

  3. Pick the matching option.

    Only the option that increases E alone does this.

Why each choice is right or wrong

  • A. Correct. A larger E makes v = E ÷ B larger.
  • B. A larger B makes E ÷ B smaller, so slower particles would go straight.
  • C. A smaller E makes E ÷ B smaller, so slower particles would go straight.
  • D. The charge cancels from the condition, so changing it does not change the speed that goes straight.

Answer: A