B13 · Electric and magnetic fields together · Notes and practice

Download the printable PDF

Add the electric and magnetic forces, and use the velocity selector v = E/B.

Open the complete lesson

Method slides in this lesson: “Method: how to solve a balance-of-forces problem”. Worked examples for each question type in B13

After the lesson: Investigate and connect (a short investigation, a data step and a real-world link)

Type in the blanks; your notes save on this device only. Nothing is submitted.

Slide 1 of 4 · Adding an electric and a magnetic force

Key ideas

Two forces act on the electron. Electric: F = (charge q, electric field E). Magnetic: F = (speed v, magnetic field B).

Top plate +, so E points . A negative charge is pushed to E, so the electron is pushed up.

Right hand: up for a positive charge. it for the electron.

Opposite forces: . The force sets the direction. Same way: add.

a = . This is the acceleration at the instant of . Give size and .

Example

An electron (e = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) moves at 3.50 × 10⁵ m/s to the right between plates with E = 520 N/C. The top plate is positive. A magnetic field of 2.50 × 10⁻³ T points into the page. What are the size and direction of the electron’s acceleration as it enters?

Try it

Same plates and electron, but the magnetic field now points out of the page. What are the size and direction of the electron’s acceleration as it enters?

Slide 2 of 4 · The velocity selector: v = E/B

Key ideas

A straight path means Fnet = . The forces are equal in size and in direction.

The bars | | mean : |qE| = .

q is on both sides and : E = vB, so v = . Mass and charge are not in the equation.

Unit: 1 T = , so N/C ÷ T is . An alpha particle is a helium nucleus, charge (twice a proton).

Another speed changes the force but not the force. The larger force sets the bend.

A positive particle is pushed E, a negative one it. Reverse the right-hand-rule answer for negative charges.

Example

In crossed fields E = 1.20 × 10³ N/C (top plate positive, field down) and B = 3.00 × 10⁻³ T (into the page), the straight-through speed is 4.00 × 10⁵ m/s. An electron enters moving right at 5.00 × 10⁵ m/s. Does it bend up or down, and why?

Try it

A proton enters the same fields at 4.00 × 10⁵ m/s (top plate positive, B into the page, moving right). Does it pass straight through? What happens if it is replaced by an alpha particle at the same speed?

Slide 3 of 4 · Method: how to solve a balance-of-forces problem

Key ideas

Step 1: the particle. One arrow per force: electric, magnetic or .

Step 2: Electric F = . Magnetic F = . Sizes first. Then directions: plate signs, and the right hand reversed for a charge.

Step 3: straight path or steady speed: Fnet = . The forces are equal and .

Step 4: |qE| = . The q . Solve: v = , E = or B = E/v.

Step 5: check. Arrows ? Does N/C ÷ T give ?

Example

An electron goes straight through crossed fields with E = 1.20 × 10³ N/C (top plate positive, field down) and B = 3.00 × 10⁻³ T (into the page). What is its speed? (e = 1.60 × 10⁻¹⁹ C)

Try it

NEW, for teacher review. An electron moves right at 5.00 × 10⁵ m/s and goes straight through plates with E = 1.00 × 10³ N/C (top plate positive, field down). What magnetic field strength and direction are needed? (e = 1.60 × 10⁻¹⁹ C)

Slide 4 of 4 · Choosing the tool

Key ideas

Find the first. Write its equation. Then use the numbers. Do not hunt for a formula that fits.

Straight path: Fnet = . Circle: the force is the net force. Accelerated from rest through ΔV: energy gained is .

Cues: straight ; accelerated from rest ; circle ; two forces .

Crossed fields: an and a field at right angles.

Two cues: one equation per cue, in . Work backward from the if the end of the path gives it.

v⊥ is the part of v at to the field. At rest, or moving the field: v⊥ = 0, so F = .

Example

Three cases: (1) an electron is accelerated from rest through 400 V, then moves in a circle in a magnetic field; (2) a proton passes straight through plates and a magnetic field; (3) a positive ion moves along a magnetic field line. For each, write the first equation or statement you would use.

Try it

A proton (m = 1.67 × 10⁻²⁷ kg) starts at rest, is accelerated through a potential difference, then enters crossed fields E = 1.20 × 10³ N/C and B = 3.00 × 10⁻³ T and goes straight through. What potential difference accelerated it?

Answer the practice problems online · Completed notes and worked key

B13-N01

B13-N01. An electron moves at 4.0 × 10⁵ m/s through a magnetic field of 3.0 × 10⁻³ T and an electric field of 600 N/C. The two forces are in opposite directions. Find the size of the net force on the electron.

Response: ____________________

B13-N02

B13-N02. A proton moves at 2.0 × 10⁵ m/s through a magnetic field of 0.0400 T. What electric field strength makes it go straight through? (N/C)

Response: ____________________

B13-N03

B13-N03. Does the speed that passes straight through a velocity selector change if the particle is an alpha particle (twice the charge of a proton) instead of a proton?

  1. Yes, it doubles because the charge doubles
  2. Yes, it halves because the mass is larger
  3. Yes, it depends on the sign only
  4. No, because v = E/B does not depend on the charge or mass

Response: ____________________

B13-N04

B13-N04. Fields E = 600 N/C and B = 1.50 × 10⁻³ T are at right angles in a velocity selector. What speed passes straight through?

Response: ____________________

B13-N05

B13-N05. In a velocity selector the top plate is positive and the magnetic field points into the page. A proton moves right, slightly slower than E/B. Which way does it bend?

  1. Up, toward the positive plate
  2. Down, toward the negative plate
  3. Into the page
  4. Out of the page

Response: ____________________

B13-N06

B13-N06. Using the electron in the first question (net force 9.60 × 10⁻¹⁷ N), find the size of its acceleration at the instant it enters the fields. Use mₑ = 9.11 × 10⁻³¹ kg.

Response: ____________________

B13-N07

B13-N07. A velocity selector must pass particles at 2.5 × 10⁵ m/s through a magnetic field of 0.0300 T. The electric field comes from plates 0.0200 m apart. What potential difference is needed?

Response: ____________________

B13-N08

B13-N08. Why do problems with both an electric and a magnetic field usually ask only for the acceleration at the instant of entry?

Response: ____________________