B13 · Electric and magnetic fields together · Answer key

Download the printable PDF

Add the electric and magnetic forces, and use the velocity selector v = E/B.

Open the complete lesson

Method slides in this lesson: “Method: how to solve a balance-of-forces problem”. Worked examples for each question type in B13

After the lesson: Investigate and connect (a short investigation, a data step and a real-world link)

Slide 1 of 4 · Adding an electric and a magnetic force

Key ideas

Two forces act on the electron. Electric: F = qE (charge q, electric field E). Magnetic: F = qvB (speed v, magnetic field B).

Top plate +, so E points down. A negative charge is pushed opposite to E, so the electron is pushed up.

Right hand: up for a positive charge. Reverse it for the electron.

Opposite forces: subtract. The larger force sets the direction. Same way: add.

a = Fnet ÷ m. This is the acceleration at the instant of entry. Give size and direction.

Example

An electron (e = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) moves at 3.50 × 10⁵ m/s to the right between plates with E = 520 N/C. The top plate is positive. A magnetic field of 2.50 × 10⁻³ T points into the page. What are the size and direction of the electron’s acceleration as it enters?

  1. Fe = qE = (1.60 × 10⁻¹⁹)(520) = 8.32 × 10⁻¹⁷ N. The top plate is positive, so E points down and the force on the electron is up.
  2. Fm = qvB = (1.60 × 10⁻¹⁹)(3.50 × 10⁵)(2.50 × 10⁻³) = 1.40 × 10⁻¹⁶ N. The right hand gives up for a positive charge, so it is down for the electron.
  3. The forces are opposite: Fnet = 1.40 × 10⁻¹⁶ − 8.32 × 10⁻¹⁷ = 5.68 × 10⁻¹⁷ N, down (the larger force).
  4. a = Fnet/m = (5.68 × 10⁻¹⁷)/(9.11 × 10⁻³¹) = 6.23 × 10¹³ m/s², down.

Try it

Same plates and electron, but the magnetic field now points out of the page. What are the size and direction of the electron’s acceleration as it enters?

  1. The electric force is unchanged: 8.32 × 10⁻¹⁷ N, up.
  2. With B out of the page the magnetic force reverses: it is now up for the electron.
  3. Both point up, so they add: Fnet = 8.32 × 10⁻¹⁷ + 1.40 × 10⁻¹⁶ = 2.23 × 10⁻¹⁶ N, up.
  4. a = (2.23 × 10⁻¹⁶)/(9.11 × 10⁻³¹) = 2.45 × 10¹⁴ m/s², up. It is larger than before because the forces now add.

Slide 2 of 4 · The velocity selector: v = E/B

Key ideas

A straight path means Fnet = 0. The forces are equal in size and opposite in direction.

The bars | | mean size only: |qE| = |qvB|.

q is on both sides and cancels: E = vB, so v = E/B. Mass and charge are not in the equation.

Unit: 1 T = 1 N/(C·m/s), so N/C ÷ T is m/s. An alpha particle is a helium nucleus, charge +3.20 × 10⁻¹⁹ C (twice a proton).

Another speed changes the magnetic force but not the electric force. The larger force sets the bend.

A positive particle is pushed with E, a negative one against it. Reverse the right-hand-rule answer for negative charges.

Example

In crossed fields E = 1.20 × 10³ N/C (top plate positive, field down) and B = 3.00 × 10⁻³ T (into the page), the straight-through speed is 4.00 × 10⁵ m/s. An electron enters moving right at 5.00 × 10⁵ m/s. Does it bend up or down, and why?

  1. The electric force is qE = (1.60 × 10⁻¹⁹)(1.20 × 10³) = 1.92 × 10⁻¹⁶ N, up. It does not depend on speed.
  2. The magnetic force is qvB = (1.60 × 10⁻¹⁹)(5.00 × 10⁵)(3.00 × 10⁻³) = 2.40 × 10⁻¹⁶ N, down.
  3. The magnetic force is larger, so the electron bends down.

Try it

A proton enters the same fields at 4.00 × 10⁵ m/s (top plate positive, B into the page, moving right). Does it pass straight through? What happens if it is replaced by an alpha particle at the same speed?

  1. The field points down, so the electric force on the positive proton is down. The right hand (thumb right, fingers into the page) gives a magnetic force up. The forces are opposite.
  2. The sizes cancel because v = E/B = (1.20 × 10³)/(3.00 × 10⁻³) = 4.00 × 10⁵ m/s, so the proton passes straight through.
  3. An alpha particle at the same speed also passes straight through: the charge cancels in qE = qvB and the mass does not appear.

Slide 3 of 4 · Method: how to solve a balance-of-forces problem

Key ideas

Step 1: draw the particle. One arrow per force: electric, magnetic or weight.

Step 2: Electric F = qE. Magnetic F = qvB. Sizes first. Then directions: plate signs, and the right hand reversed for a negative charge.

Step 3: straight path or steady speed: Fnet = 0. The forces are equal and opposite.

Step 4: |qE| = |qvB|. The q cancels. Solve: v = E/B, E = vB or B = E/v.

Step 5: check. Arrows opposite? Does N/C ÷ T give m/s?

Example

An electron goes straight through crossed fields with E = 1.20 × 10³ N/C (top plate positive, field down) and B = 3.00 × 10⁻³ T (into the page). What is its speed? (e = 1.60 × 10⁻¹⁹ C)

  1. Step 1: the electron moves right. E points down, so the electric force is up. The magnetic force is down. The arrows are opposite.
  2. Step 2: electric force F = qE. Magnetic force F = qvB, where v is the unknown.
  3. Step 3: the path is straight, so Fnet = 0 and the sizes are equal.
  4. Step 4: qE = qvB, so v = E/B = (1.20 × 10³) ÷ (3.00 × 10⁻³) = 4.00 × 10⁵ m/s.
  5. Step 5: (1.60 × 10⁻¹⁹)(1.20 × 10³) = 1.92 × 10⁻¹⁶ N and (1.60 × 10⁻¹⁹)(4.00 × 10⁵)(3.00 × 10⁻³) = 1.92 × 10⁻¹⁶ N. They match, and N/C ÷ T is m/s.

Try it

NEW, for teacher review. An electron moves right at 5.00 × 10⁵ m/s and goes straight through plates with E = 1.00 × 10³ N/C (top plate positive, field down). What magnetic field strength and direction are needed? (e = 1.60 × 10⁻¹⁹ C)

  1. Step 1: E points down, so the electric force on the electron is up. For the forces to balance, the magnetic force must be down.
  2. Step 2 and 3: F = qE and F = qvB, and the path is straight, so Fnet = 0.
  3. Step 4: qE = qvB, so B = E/v = (1.00 × 10³) ÷ (5.00 × 10⁵) = 2.00 × 10⁻³ T.
  4. Direction: fingers into the page and thumb right make the palm face up, which is the force on a positive charge. For the electron the force is down, so B points into the page.
  5. Step 5: (1.60 × 10⁻¹⁹)(1.00 × 10³) = 1.60 × 10⁻¹⁶ N and (1.60 × 10⁻¹⁹)(5.00 × 10⁵)(2.00 × 10⁻³) = 1.60 × 10⁻¹⁶ N. They match.

Slide 4 of 4 · Choosing the tool

Key ideas

Find the cue first. Write its equation. Then use the numbers. Do not hunt for a formula that fits.

Straight path: Fnet = 0. Circle: the magnetic force is the net force. Accelerated from rest through ΔV: energy gained is qΔV.

Cues: straight v = E/B; accelerated from rest qΔV = ½mv²; circle qvB = mv²/r; two forces add Fe and Fm as vectors.

Crossed fields: an electric and a magnetic field at right angles.

Two cues: one equation per cue, in order. Work backward from the speed if the end of the path gives it.

v⊥ is the part of v at right angles to the field. At rest, or moving along the field: v⊥ = 0, so F = 0.

Example

Three cases: (1) an electron is accelerated from rest through 400 V, then moves in a circle in a magnetic field; (2) a proton passes straight through plates and a magnetic field; (3) a positive ion moves along a magnetic field line. For each, write the first equation or statement you would use.

  1. Case 1: qΔV = ½mv² gives the speed, then qvB = mv²/r gives the radius.
  2. Case 2: the path is straight, so the net force is zero and qE = qvB.
  3. Case 3: the ion moves along the field, so v⊥ = 0 and the magnetic force is zero.

Try it

A proton (m = 1.67 × 10⁻²⁷ kg) starts at rest, is accelerated through a potential difference, then enters crossed fields E = 1.20 × 10³ N/C and B = 3.00 × 10⁻³ T and goes straight through. What potential difference accelerated it?

  1. Straight path: v = E/B = (1.20 × 10³)/(3.00 × 10⁻³) = 4.00 × 10⁵ m/s.
  2. Accelerator: qΔV = ½mv², so ΔV = mv²/(2q).
  3. ΔV = (1.67 × 10⁻²⁷)(4.00 × 10⁵)²/[2(1.60 × 10⁻¹⁹)] = 835 V.

Answer the practice problems online · Completed notes and worked key

B13-N01

B13-N01. An electron moves at 4.0 × 10⁵ m/s through a magnetic field of 3.0 × 10⁻³ T and an electric field of 600 N/C. The two forces are in opposite directions. Find the size of the net force on the electron.

  1. Givens: q = 1.60 × 10⁻¹⁹ C; v = 4.0 × 10⁵ m/s; B = 3.0 × 10⁻³ T; E = 600 N/C; forces opposite. Question: Fnet.
  2. Magnetic: qvB = 1.92 × 10⁻¹⁶ N. Electric: qE = 9.60 × 10⁻¹⁷ N.
  3. Subtract (opposite directions): 9.60 × 10⁻¹⁷ N, in the direction of the larger force, the magnetic one.
  4. Answer: 9.60 × 10⁻¹⁷ N

B13-N02

B13-N02. A proton moves at 2.0 × 10⁵ m/s through a magnetic field of 0.0400 T. What electric field strength makes it go straight through? (N/C)

  1. Givens: v = 2.0 × 10⁵ m/s; B = 0.0400 T. Question: E.
  2. Straight through means qE = qvB, so E = vB.
  3. E = (2.0 × 10⁵)(0.0400) = 8000 N/C.
  4. Answer: 8000 N/C

B13-N03

B13-N03. Does the speed that passes straight through a velocity selector change if the particle is an alpha particle (twice the charge of a proton) instead of a proton?

  1. Yes, it doubles because the charge doubles
  2. Yes, it halves because the mass is larger
  3. Yes, it depends on the sign only
  4. No, because v = E/B does not depend on the charge or mass
  1. Givens: same fields; double charge. Question: does the selected speed change.
  2. The charge cancels in qE = qvB. The selected speed is v = E/B for any charge or mass.
  3. Answer: D. No, because v = E/B does not depend on the charge or mass

B13-N04

B13-N04. Fields E = 600 N/C and B = 1.50 × 10⁻³ T are at right angles in a velocity selector. What speed passes straight through?

  1. Givens: E = 600 N/C; B = 1.50 × 10⁻³ T. Question: v.
  2. v = E/B = 600 ÷ (1.50 × 10⁻³) = 4.00 × 10⁵ m/s.
  3. Answer: 4.00 × 10⁵ m/s

B13-N05

B13-N05. In a velocity selector the top plate is positive and the magnetic field points into the page. A proton moves right, slightly slower than E/B. Which way does it bend?

  1. Up, toward the positive plate
  2. Down, toward the negative plate
  3. Into the page
  4. Out of the page
  1. Givens: top plate +; B into page; proton moving right with v < E/B. Question: direction it bends.
  2. Electric force on a proton is from + to −: down. Magnetic force on a proton moving right in a field into the page is up (right-hand rule).
  3. The magnetic force is proportional to v. A slower proton has a smaller magnetic force, so the downward electric force is larger: it bends down.
  4. Answer: B. Down, toward the negative plate

B13-N06

B13-N06. Using the electron in the first question (net force 9.60 × 10⁻¹⁷ N), find the size of its acceleration at the instant it enters the fields. Use mₑ = 9.11 × 10⁻³¹ kg.

  1. Givens: Fnet = 9.60 × 10⁻¹⁷ N; m = 9.11 × 10⁻³¹ kg. Question: a at entry.
  2. a = F/m = 1.05 × 10¹⁴ m/s².
  3. Answer: 1.05 × 10¹⁴ m/s²

B13-N07

B13-N07. A velocity selector must pass particles at 2.5 × 10⁵ m/s through a magnetic field of 0.0300 T. The electric field comes from plates 0.0200 m apart. What potential difference is needed?

  1. Givens: v = 2.5 × 10⁵ m/s; B = 0.0300 T; Δd = 0.0200 m (the distance between the plates). Question: ΔV.
  2. Straight through: E = vB = 7500 V/m.
  3. ΔV = EΔd = (7500)(0.0200) = 150 V.
  4. Answer: 150 V

B13-N08

B13-N08. Why do problems with both an electric and a magnetic field usually ask only for the acceleration at the instant of entry?

  1. Givens: both fields act. Question: why the instant of entry.
  2. The magnetic force depends on the velocity, and the velocity changes direction and size as the particle moves.
  3. So the net force and acceleration keep changing; at the instant of entry the velocity is known, so we can find them.