B5 · Reading straight-line graphs · Extra practice · Solutions

Download the printable PDF · Answer online · Notes and practice

B5-X01

B5-X01. A speed-time graph has a line of best fit through (1.0 s, 2.5 m/s) and (6.0 s, 14.0 m/s). The slope is the acceleration. Find the acceleration in m/s².

  1. Givens: two points on the line, (1.0 s, 2.5 m/s) and (6.0 s, 14.0 m/s). Question: the slope, which is the acceleration.
  2. Slope = (y₂ − y₁) ÷ (x₂ − x₁).
  3. = (14.0 − 2.5) ÷ (6.0 − 1.0) = 2.30 m/s².
  4. The unit is the y unit over the x unit: (m/s) ÷ s = m/s².
  5. Answer: 2.30 m/s²

B5-X02

B5-X02. A line of best fit for distance against time is d = (12 m/s)t + 4 m. What does the 4 m stand for?

  1. The distance at t = 0 s
  2. The speed of the object
  3. The slope of the line
  4. The distance at t = 12 s
  1. Givens: d = (12 m/s)t + 4 m, which has the form y = mx + b. Question: what b means.
  2. b is the y-intercept, the value of y when x = 0.
  3. So 4 m is the distance when t = 0 s. The slope m = 12 m/s is the speed.
  4. Answer: A. The distance at t = 0 s

B5-X03

B5-X03. A graph of field strength E against 1/r² for a point charge is a straight line through the origin. It passes through (4.00 m⁻², 216 N/C) and (25.0 m⁻², 1350 N/C). Use k = 8.99 × 10⁹ N·m²/C². Find the source charge in coulombs.

  1. Givens: points (4.00 m⁻², 216 N/C) and (25.0 m⁻², 1350 N/C); k = 8.99 × 10⁹ N·m²/C². Question: Q.
  2. Slope = (1350 − 216) ÷ (25.0 − 4.00) = 54.0 N·m²/C.
  3. E = kQ(1/r²) matches y = mx, so the slope = kQ.
  4. Q = slope ÷ k = 54.0 ÷ (8.99 × 10⁹) = 6.01 × 10⁻⁹ C.
  5. Answer: 6.01 × 10⁻⁹ C

B5-X04

B5-X04. A cart starts from rest and speeds up steadily, so d = ½at². Which pair of axes gives a straight line?

  1. d on the vertical axis, t on the horizontal axis
  2. t on the vertical axis, d on the horizontal axis
  3. d on the vertical axis, t² on the horizontal axis
  4. d on the vertical axis, 1/t² on the horizontal axis
  1. Givens: d = ½at², with a constant. Question: which axes make a line.
  2. Compare with y = mx: if x = t², then d = (a/2)(t²), a straight line through the origin.
  3. The slope is a/2.
  4. Answer: C. d on the vertical axis, t² on the horizontal axis

B5-X05

B5-X05. A spring test gives the line F = (18.0 N/m)x + 0.40 N for extensions from 0.020 m to 0.150 m. Find the extension x, in metres, that gives F = 2.50 N.

  1. Givens: F = (18.0 N/m)x + 0.40 N; F = 2.50 N; data from 0.020 m to 0.150 m. Question: x.
  2. Solve for x: x = (F − b) ÷ m.
  3. x = (2.5 − 0.4) ÷ 18.0 = 0.1167 m.
  4. This is inside the measured range, so it is interpolation and is reliable.
  5. Answer: 0.117 m

B5-X06

B5-X06. A small charged ball sits in a uniform field. A graph of force F against test charge q is a straight line through the origin. It passes through (2.00 × 10⁻⁶ C, 3.00 × 10⁻³ N) and (8.00 × 10⁻⁶ C, 0.0120 N). Find the field strength in N/C.

  1. Givens: points (2.00 × 10⁻⁶ C, 3.00 × 10⁻³ N) and (8.00 × 10⁻⁶ C, 0.0120 N). Question: the field strength E.
  2. Slope = (0.0120 − 3.00 × 10⁻³) ÷ (8.00 × 10⁻⁶ − 2.00 × 10⁻⁶) = 1500 N/C.
  3. F = qE matches y = mx, so the slope is the field strength E.
  4. Answer: 1500 N/C

B5-X07

B5-X07. Force measurements were made for separations from 0.10 m to 0.50 m. A student predicts the force at 0.30 m and at 0.90 m from the line of best fit. Which statement is correct?

  1. Both are interpolation, so both are equally reliable.
  2. 0.30 m is extrapolation; 0.90 m is interpolation.
  3. Both are extrapolation, so neither can be used.
  4. 0.30 m is interpolation and is reliable; 0.90 m is extrapolation and is less reliable.
  1. Givens: measured range 0.10 m to 0.50 m; predictions at 0.30 m and 0.90 m. Question: which prediction is reliable.
  2. 0.30 m is inside the range: interpolation.
  3. 0.90 m is outside the range: extrapolation. The line may not keep going the same way, so trust it less.
  4. Answer: D. 0.30 m is interpolation and is reliable; 0.90 m is extrapolation and is less reliable.

B5-X08

B5-X08. A graph of force F against charge q gives the line F = (1500 N/C)q + 2.0 × 10⁻³ N. Theory says F = qE, so the line should pass through the origin. Give one likely reason for the 2.0 × 10⁻³ N and say what you would do about it.

  1. Givens: line F = (1500 N/C)q + 2.0 × 10⁻³ N; theory F = qE, with zero intercept. Question: a likely reason for the intercept, and what to do.
  2. The intercept is the force at q = 0. A force when there is no charge means something other than the electric force is acting, or the instrument reads wrongly at zero.
  3. Likely reasons: the force meter was not set to zero (a zero error), or a small friction or weight force acted.
  4. Fix: zero the meter before measuring, repeat the data, and use the slope (1500 N/C) for E, because the slope is not changed by a constant offset.