B13 · Worked examples
These questions cover batteries, fuel cells, pool chlorine and the redox idea behind old metal-making. A battery is one or more voltaic cells. E°cell is the voltage of a cell under standard conditions. These are 1.0 mol/L (moles per litre) solutions, 25.00 °C (degrees Celsius, which is 298.15 K, kelvin) and 101.325 kPa (kilopascals). The unit V is the volt. You find E°cell as the cathode table value minus the anode table value.
Open the B13 lesson · B13 slide notes
Worked question types
Each example shows every step, why you do it, and the idea behind it.
Question typeName the cell type and the electrodes during discharge and recharge
Use this when: The question says which electrode is oxidized while a battery works, and asks for the cell type or the electrode names during charging.
Example. Electrode P of a rechargeable battery is oxidized while the battery powers a torch, and electrode Q is reduced. Name the cell type and the anode while it powers the torch. Then a charger reverses the reaction. Name the cell type, the anode and the cathode. A watch cell cannot be recharged. Is it a primary cell or a secondary cell?
- Find what happens at each electrode while the torch is on.
Oxidation is the loss of electrons. The anode is the electrode where oxidation happens, and the cathode is where reduction happens.
P is oxidized, so P is the anode. Q is reduced, so Q is the cathode
- Name the cell type.
A cell that runs by itself and gives out electricity is a voltaic cell.
powering the torch: voltaic cell
- Reverse the reaction for the charger.
A power supply forces the reverse change. So P is now reduced and Q is now oxidized.
charging: P is reduced, Q is oxidized
- Rename the electrodes.
The names anode and cathode follow oxidation and reduction. When the direction swaps, the names swap.
charging: Q is the anode, P is the cathode
- Name the cell type while charging.
A cell that is driven by a power supply is an electrolytic cell.
charging: electrolytic cell
- Classify the watch cell.
A primary cell is used once. A secondary cell can be recharged.
the watch cell is a primary cell
Why this works. The electrode names do not belong to the metal. They belong to the change that is happening. So the same piece of metal can be the anode in one direction and the cathode in the other.
Check your answer. Each electrode has the opposite role during charging. P was the anode and is now the cathode.
Common mistake. Saying that P is always the anode because it was the anode first. Ask what is happening at the electrode in this direction.
Answer: Discharge: voltaic cell, P is the anode. Recharge: electrolytic cell, Q is the anode and P is the cathode. The watch cell is primary
Question typeFind the cell reaction, E°cell and battery voltage of a lead-acid battery
Use this when: The question gives two table rows for lead and asks for the cell reaction, the voltage of one cell, or the voltage of several cells in a row.
Example. A scooter battery has 3 lead-acid cells in a row. Table value: E°(PbO₂/PbSO₄) = +1.69 V for PbO₂ + SO₄²⁻ + 4H⁺ + 2e⁻ → PbSO₄ + 2H₂O. Table value: E°(PbSO₄/Pb) = −0.36 V for PbSO₄ + 2e⁻ → Pb + SO₄²⁻. Write the cell reaction. Find E°cell for one cell. Find the voltage of the battery.
- Choose the cathode.
In a voltaic cell the row with the higher table value is reduced at the cathode. Here that is PbO₂.
1.69 V is higher than −0.36 V
- Reverse the lower row for the anode.
Oxidation happens at the anode, so the lower row runs backward. Keep its table value as printed.
Pb + SO₄²⁻ → PbSO₄ + 2e⁻ table value stays −0.36 V
- Match the electrons.
The reduction half has 2e⁻ and the oxidation half has 2e⁻. The smallest number both go into is 2.
2 and 2 → 2
- Check the multipliers.
Both halves already have the same number of electrons, so neither is multiplied.
× 1 and × 1
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
PbO₂ + 2SO₄²⁻ + 4H⁺ + 2e⁻ + Pb → 2PbSO₄ + 2H₂O + 2e⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: e⁻ → PbO₂ + 2SO₄²⁻ + 4H⁺ + Pb → 2PbSO₄ + 2H₂O
- Check atoms and charge.
Both must match on the two sides.
charge: 0 = 0 ✓ atoms: Pb 2, O 10, S 2, H 4 ✓
- Subtract.
E°cell is the cathode value minus the anode value. Do not multiply by any coefficient.
E°cell = +1.69 V − (−0.36 V) = +2.05 V
- Multiply for the cells in a row.
Cells in a row add their voltages. Count the cells and multiply the voltage of one cell.
3 × 2.05 V = 6.15 V
Why this works. The anode and the cathode values both come from the table as printed. Only the direction of the lower row changes. Cells joined in a row add their voltages, so the battery voltage is the number of cells times E°cell.
Check your answer. The cathode value is higher than the anode value, so E°cell is positive, as a voltaic cell needs. The battery is 3 times one cell.
Common mistake. Forgetting the number of cells. One cell gives about 2 V, so a battery that needs more than that must have several.
Answer: PbO₂ + 2SO₄²⁻ + 4H⁺ + Pb → 2PbSO₄ + 2H₂O. E°cell = +2.05 V per cell. Battery voltage = 6.15 V
Question typeFind how many cells in a row give enough voltage
Use this when: The question gives the voltage a device needs and the voltage of one cell, and asks for the number of cells.
Example. A tool needs at least 7.5 V. Each lead-acid cell has E°cell = +2.05 V. Cells are joined in a row. How many cells are needed?
- Say what you are finding.
Use Method: how to find how many cells make a battery. Cells in a row add their voltages. So the voltage needed divided by the voltage of one cell gives the number of cells.
number of cells = voltage needed ÷ voltage of one cell
- Divide.
Keep one extra digit in the middle value.
7.5 V ÷ 2.05 V = 3.66
- Make it a whole number.
You cannot use part of a cell. The battery must reach at least the voltage needed, so round up, not to the nearest number.
3.66 → 4 cells
- Check with both counts.
Three cells must fall short, and four must be enough.
3 × 2.05 = 6.15 V, which is less than 7.5 V. 4 × 2.05 = 8.20 V ✓
Why this works. The question says at least. So the battery voltage must be equal to or above the need. Rounding down would leave the device short of voltage, even when the decimal part is small.
Check your answer. The four-cell battery gives 8.20 V, a little above 7.5 V.
Common mistake. Rounding 3.66 to the nearest whole number only when it would fall short. Always check that the answer reaches the voltage needed.
Answer: 4 cells
Question typeDescribe what happens at each electrode of a discharging lead-acid cell
Use this when: The question asks for the anode, the half-reaction, a change in mass at an electrode, or a change in the acid.
Example. A lead-acid battery is discharging. The lead electrode reacts as Pb + SO₄²⁻ → PbSO₄ + 2e⁻. The other electrode reacts as PbO₂ + SO₄²⁻ + 4H⁺ + 2e⁻ → PbSO₄ + 2H₂O. PbSO₄(s) is a solid. For each electrode, name it as anode or cathode and say if its mass rises or falls. What happens to the acid?
- Name the lead electrode.
Lead loses electrons in its half-reaction. Loss of electrons is oxidation, and oxidation happens at the anode.
lead electrode: anode
- Look at the product and its state.
PbSO₄(s) is a solid, so it stays on the lead. The sulfate comes out of the solution and sticks to the electrode.
Pb becomes PbSO₄ on the electrode. Mass rises
- Name the other electrode.
The PbO₂ electrode gains electrons. Gain of electrons is reduction, and reduction happens at the cathode.
PbO₂ electrode: cathode
- Look at its product.
The product is again PbSO₄(s), a solid that forms on this electrode. PbO₂ turns into PbSO₄ and water.
solid PbSO₄ forms on it. Mass rises
- Look at the acid.
Both half-reactions use SO₄²⁻ on the left. The cathode half-reaction also uses H⁺. These ions are used up.
the acid becomes more dilute
Why this works. A product that is a solid stays on the electrode. So the electrode gains the mass of the ions that joined it. A product that dissolves would leave the electrode and the mass would fall.
Check your answer. Count the SO₄²⁻ in the two half-reactions. Both appear on the reactant side, so the solution loses sulfate.
Common mistake. Saying the anode always loses mass. Read the half-reaction and ask if the product is a solid on the electrode.
Answer: Lead is the anode and gains mass. PbO₂ is the cathode and also gains mass. The acid becomes more dilute
Question typeCombine supplied half-reactions for a primary cell and name what is oxidized and reduced
Use this when: The question supplies the two half-reactions of a cell and asks for the overall reaction or for the species that is oxidized or reduced.
Example. A silver oxide watch cell is a primary cell. The supplied half-reactions are Zn + 2OH⁻ → ZnO + H₂O + 2e⁻ and Ag₂O + H₂O + 2e⁻ → 2Ag + 2OH⁻. Write the overall reaction. Name the species that is oxidized and the species that is reduced. Find the oxidation number of Zn and of Ag on each side. Use O = −2.
- Use the supplied halves.
Half-reactions are given, so do not look in the booklet. You only match electrons and cancel.
no table needed
- Match the electrons.
The zinc half has 2e⁻ and the silver oxide half has 2e⁻. The smallest number both go into is 2.
2 and 2 → 2
- Check the multipliers.
Both halves already have the same number of electrons, so neither is multiplied.
× 1 and × 1
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
Zn + 2OH⁻ + Ag₂O + H₂O + 2e⁻ → ZnO + H₂O + 2e⁻ + 2Ag + 2OH⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: OH⁻, H₂O, e⁻ → Zn + Ag₂O → ZnO + 2Ag
- Check atoms and charge.
Both must match on the two sides.
charge: 0 = 0 ✓ atoms: Zn 1, Ag 2, O 1 ✓
- Find the oxidation numbers.
The oxidation numbers in a species add up to its charge. O is −2.
Zn: 0 → +2. Ag in Ag₂O: 2x + (−2) = 0, so x = +1. Ag metal: 0
- Name the changes.
A rise in oxidation number is oxidation. A fall is reduction.
Zn rises 0 → +2: oxidized. Ag falls +1 → 0: reduced
- Check the electrons.
The electrons lost must equal the electrons gained.
Zn loses 2. Two Ag atoms gain 2 × 1 = 2 ✓
Why this works. Oxidation numbers give a second check on the half-reactions. The total rise for the oxidized atoms must equal the total fall for the reduced atoms. Water and hydroxide ions cancel because they are on both sides.
Check your answer. Atoms in the overall equation: Zn 1, Ag 2, O 1, on both sides. Charge is 0 on both sides.
Common mistake. Cancelling the electrons and stopping. OH⁻ and H₂O appear on both sides too, so they cancel as well.
Answer: Zn + Ag₂O → ZnO + 2Ag. Zn is oxidized and Ag₂O (the Ag in it) is reduced
Question typeCombine the halves of a hydrogen fuel cell and find E°cell
Use this when: The question describes a fuel cell, gives table rows or half-reactions, and asks for the overall reaction and E°cell.
Example. A hydrogen fuel cell uses a basic solution. Table values: E°(O₂/OH⁻) = +0.40 V for O₂ + 2H₂O + 4e⁻ → 4OH⁻, and E°(H₂O/H₂) = −0.83 V for 2H₂O + 2e⁻ → H₂ + 2OH⁻. Find the overall reaction and E°cell. A fuel cell is a voltaic cell that is fed its reactants all the time.
- Choose the cathode.
The higher table value is reduced at the cathode. Oxygen is the cathode.
+0.40 V is higher than −0.83 V
- Reverse the lower row for the anode.
Hydrogen is oxidized. Run its row backward and keep its table value as printed.
H₂ + 2OH⁻ → 2H₂O + 2e⁻ table value stays −0.83 V
- Match the electrons.
The hydrogen half has 2e⁻ and the oxygen half has 4e⁻. The smallest number both go into is 4.
2 and 4 → 4
- Multiply each half.
Multiply every term of the hydrogen half by 2 and every term of the oxygen half by 1.
hydrogen × 2: 2H₂ + 4OH⁻ → 4H₂O + 4e⁻ | oxygen × 1: O₂ + 2H₂O + 4e⁻ → 4OH⁻
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
2H₂ + 4OH⁻ + O₂ + 2H₂O + 4e⁻ → 4H₂O + 4e⁻ + 4OH⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: OH⁻, H₂O, e⁻ → 2H₂ + O₂ → 2H₂O
- Check atoms and charge.
Both must match on the two sides.
charge: 0 = 0 ✓ atoms: H 4, O 2 ✓
- Subtract.
Use the table values as printed. Do not double −0.83 V, even though the hydrogen half was doubled.
E°cell = +0.40 V − (−0.83 V) = +1.23 V
Why this works. The same overall reaction can be written in acid or in base. The water and the ions that cancel are different, but the voltage is the same, because the cell does the same job.
Check your answer. In acid, E°(O₂/H₂O) = +1.23 V and E°(H⁺/H₂) = 0.00 V give +1.23 V also.
Common mistake. Multiplying −0.83 V by 2 because the hydrogen half was doubled. A table value never changes with the coefficients.
Answer: 2H₂ + O₂ → 2H₂O. E°cell = +1.23 V
Question typeJudge a claim about a fuel cell using evidence
Use this when: The question gives a claim, such as “emission-free”, and asks if it is acceptable or what evidence you would need.
Example. A company says: “Our hydrogen fuel-cell bus is emission-free.” The cell reaction is 2H₂ + O₂ → 2H₂O. State what the cell reaction supports. Name the evidence you still need. Write a fair conclusion.
- Say what the cell reaction shows.
The only product of the cell reaction is water. So the claim is true for the cell itself.
at the cell: only H₂O
- Say what the claim covers.
A bus is more than the cell. The hydrogen must be made, stored and moved to the bus before it reaches the cell.
the claim is about the whole process, but the reaction shows only the cell
- Name the evidence you need.
Each step before the cell can use energy and release gases. You need evidence about each step.
how the hydrogen is made, how much energy it takes, and what gases are released
- Write the conclusion.
Do not accept or reject the claim without the evidence. Say what is supported and what is not.
Supported: the cell makes only water. Not yet supported: the whole bus system is emission-free
Why this works. A claim is only as wide as the evidence behind it. The cell reaction is evidence about the cell. To judge a claim about a whole system, you need evidence about the whole system.
Check your answer. Your conclusion names a limit. It does not say yes or no without evidence.
Common mistake. Saying the claim is false because hydrogen is made somewhere else. You do not have that evidence yet, so say what you would need.
Answer: The cell makes only water, so the claim is supported for the cell. The whole system needs evidence about making, storing and moving hydrogen
Question typeChoose a cell for a job and justify it with an advantage and a limit
Use this when: The question describes a device and how it is used, and asks you to choose a primary cell, a secondary cell or a fuel cell.
Example. Device 1 is a smoke alarm. It is used all day, at low power, and its cell is changed once a year. Device 2 is a game controller that is used every day for hours. Choose a primary cell or a secondary cell for each. Give one advantage and one limit of each choice.
- Start with the job.
Say how often the cell is used and how much power is needed.
smoke alarm: low power, one change a year. controller: daily heavy use
- Match the smoke alarm.
A primary cell is cheap and keeps its charge in storage. A one-year life suits low power.
primary cell. Advantage: cheap and long shelf life
- State its limit.
A primary cell is used once. The used cell has metals that must be recycled.
limit: one use, so the used cell is waste
- Match the controller.
A secondary cell can be recharged many times. Daily use would need many primary cells.
secondary cell. Advantage: many uses
- State its limit.
A secondary cell costs more at the start and needs a charger.
limit: higher cost at the start
Why this works. There is no best cell for every job. Voltage, mass, cost, lifetime, recharging and disposal are separate pieces of evidence. You choose by matching the evidence to the job.
Check your answer. Each choice has one advantage and one limit, so the answer weighs both sides.
Common mistake. Choosing the cell with the highest voltage. A higher voltage does not show a longer life or a lower cost.
Answer: Smoke alarm: primary cell (advantage cheap, limit one use). Controller: secondary cell (advantage many uses, limit higher cost at the start)
Question typeName the products when salt water is electrolyzed for pool chlorine
Use this when: The question describes a salt-water electrolysis cell and asks for the product at each electrode, the half-reactions or the net equation.
Example. A pool system electrolyzes NaCl(aq) with electrodes that do not react. Table values: E°(Na⁺/Na) = −2.71 V, E°(H₂O/H₂) = −0.83 V, E°(O₂/H₂O) = +1.23 V and E°(Cl₂/Cl⁻) = +1.36 V. Name the product at the cathode and at the anode. Write the net equation. Say what the table predicts at the anode, and what forms in practice.
- Find the cathode product.
Reduction happens at the cathode. The higher table value is reduced. Water (−0.83 V) beats Na⁺ (−2.71 V).
2H₂O + 2e⁻ → H₂ + 2OH⁻ H₂ and OH⁻ form
- Find what the table predicts at the anode.
Oxidation happens at the anode. The lower table value is oxidized. Water (+1.23 V) is lower than Cl⁻ (+1.36 V). The +1.23 V row is for acid, so this is only a first prediction.
the table predicts O₂ from water
- Write what forms in practice.
In practice Cl₂ forms. This is the chloride anomaly from the electrolysis lesson, so use it.
2Cl⁻ → Cl₂ + 2e⁻
- Match the electrons.
The chloride half has 2e⁻ and the water half has 2e⁻. The smallest number both go into is 2.
2 and 2 → 2
- Add the halves. Write every term before you cancel.
List all the left terms and all the right terms.
2Cl⁻ + 2H₂O + 2e⁻ → Cl₂ + 2e⁻ + H₂ + 2OH⁻
- Cancel identical terms on opposite sides.
Electrons cancel. Cancel the same species that appear on both sides, such as H⁺ or H₂O, and keep what is left over.
cancelled: e⁻ → 2Cl⁻ + 2H₂O → Cl₂ + H₂ + 2OH⁻
- Check atoms and charge.
Both must match on the two sides.
charge: −2 = −2 ✓ atoms: Cl 2, H 4, O 2 ✓
Why this works. The table predicts which change is easiest, but real electrolysis can differ. The +1.23 V row is for acid, so the comparison with chloride is only a first prediction. Chloride is the known exception. Chlorine gas forms at the anode, and hydrogen and hydroxide ions form at the cathode.
Check your answer. Charge is −2 on each side of the net equation, and there is one gas at each electrode.
Common mistake. Naming sodium metal at the cathode. Na⁺ has a much lower table value than water, so water is reduced.
Answer: Cathode: H₂ and OH⁻. Anode: Cl₂. 2Cl⁻ + 2H₂O → Cl₂ + H₂ + 2OH⁻
Question typeShow that a reaction is a disproportionation
Use this when: The question gives a reaction in which one element appears in three or more places, and asks if it is a disproportionation.
Example. A heated hypochlorite solution changes as 3OCl⁻ → ClO₃⁻ + 2Cl⁻. Show that it is balanced. Find the oxidation number of Cl in each ion. Is it a disproportionation? Use O = −2.
- Check atoms and charge.
Count each element and the total charge on each side.
Cl 3 = 3, O 3 = 3. charge −3 = −3 ✓
- Find Cl in OCl⁻.
The oxidation numbers add up to the charge. O is −2.
x + (−2) = −1, so x = +1
- Find Cl in ClO₃⁻.
Three O add −6, and the charge is −1.
x + 3(−2) = −1, so x = +5
- Find Cl in Cl⁻.
A single-atom ion has an oxidation number equal to its charge.
x = −1
- Name the changes.
A rise is oxidation and a fall is reduction. Look at where the chlorine started and ended.
+1 → +5 oxidized. +1 → −1 reduced
- Check the electrons.
One Cl rises by 4. Two Cl each fall by 2.
4 lost = 2 × 2 = 4 gained ✓
- Decide.
One species, OCl⁻, is both oxidized and reduced.
yes, a disproportionation
Why this works. In a disproportionation, the same element starts at one oxidation number and ends at two others, one higher and one lower. The electrons lost by the atoms that rise equal the electrons gained by the atoms that fall.
Check your answer. Four electrons are lost by one Cl and four are gained by two Cl, so the changes match the coefficients.
Common mistake. Looking only at the products. Compare the product values with the starting value of the one reactant.
Answer: Balanced, with Cl at +1 in OCl⁻, +5 in ClO₃⁻ and −1 in Cl⁻. Yes, it is a disproportionation
Question typeUse oxidation numbers to name the reducing agent in metal extraction
Use this when: The question gives a reaction that makes a metal from its ore and asks what is oxidized, what is reduced and which species is the reducing agent.
Example. Iron ore is heated with carbon monoxide: Fe₂O₃ + 3CO → 2Fe + 3CO₂. Find the oxidation numbers of Fe and C on each side. Name what is oxidized, what is reduced and the reducing agent. Use O = −2. Say how this shows science explaining technology.
- Find Fe in Fe₂O₃.
The oxidation numbers add to 0. Three O add −6, so two Fe add +6.
2x + 3(−2) = 0, so x = +3. Fe metal: 0
- Find C in CO and in CO₂.
In each, O is −2 and the species has no charge.
CO: x + (−2) = 0, so x = +2. CO₂: x + 2(−2) = 0, so x = +4
- Name the changes.
A fall in oxidation number is reduction. A rise is oxidation.
Fe: +3 → 0, reduced. C: +2 → +4, oxidized
- Check the electrons.
Use the coefficients: two Fe and three C.
Fe gains 2 × 3 = 6. C loses 3 × 2 = 6 ✓
- Name the reducing agent.
The reducing agent is the species that is oxidized. It gives electrons to the other species.
CO is the reducing agent (the carbon in it)
- Link to science and technology.
People made iron long before they knew about electrons. The redox model later explained why carbon-based agents work.
technology first, then the explanation
Why this works. The reducing agent is always the species whose oxidation number rises. It is oxidized, and it causes the reduction of the other species. The oxidizing agent is the species that is reduced.
Check your answer. Six electrons are lost and six are gained. The atoms and the charge also match on the two sides.
Common mistake. Naming Fe₂O₃ as the reducing agent because it is the ore. The ore is reduced, so it is the oxidizing agent.
Answer: Fe in Fe₂O₃ is reduced (+3 to 0). C in CO is oxidized (+2 to +4). CO is the reducing agent
Diploma-style questions
Try each question first. Then open the worked solution.
Multiple choice · outcome 30-B1.2kA lead-acid battery is being recharged. The electrode that is lead metal during discharge is reduced from PbSO₄ back to Pb. Which statement is correct while the battery is recharged?
- A. It is a voltaic cell, and the lead electrode is the anode.
- B. It is an electrolytic cell, and the lead electrode is the cathode.
- C. It is an electrolytic cell, and the lead electrode is the anode.
- D. It is a voltaic cell, and the lead electrode is the cathode.
Show the worked solution (try the question first)
- Name the cell type.
A power supply drives the reaction, so the battery is an electrolytic cell.
electrolytic
- Name the lead electrode.
PbSO₄ becomes Pb, which is a gain of electrons. Gain of electrons is reduction, and reduction is at the cathode.
the lead electrode is the cathode
- Choose.
Electrolytic cell and the lead electrode as cathode.
answer B
Why each choice is right or wrong
- A. A power supply drives the reaction, so this is not a voltaic cell. The lead electrode is also reduced, so it is not the anode.
- B. Correct. A power supply makes it an electrolytic cell. PbSO₄ is reduced to Pb, so the lead electrode is the cathode.
- C. The cell type is right. But the lead electrode gains electrons here, so it is the cathode and not the anode.
- D. The lead electrode is the cathode, which is right. But a cell that runs on a power supply is electrolytic, not voltaic.
Answer: B
Numerical response · outcome 30-B2.1kA battery must supply at least 11.5 V. Each lead-acid cell has E°cell = +2.05 V. The cells are joined in a row. How many cells are needed? Record your answer as a whole number. Enter the digit.
Show the worked solution (try the question first)
- Divide.
Cells in a row add their voltages. Divide the voltage needed by the voltage of one cell.
11.5 V ÷ 2.05 V = 5.61
- Round up.
You cannot use part of a cell, and the battery must reach at least the voltage needed.
5.61 → 6
- Check.
Five cells fall short and six are enough.
5 × 2.05 = 10.25 V. 6 × 2.05 = 12.30 V ✓
- Enter the digit.
The answer is a single digit.
record 6
Answer: 6 cells. Record 6.
Numerical response · outcome 30-B1.2kA zinc-air cell is treated as the cathode half E°(O₂/OH⁻) = +0.40 V for O₂ + 2H₂O + 4e⁻ → 4OH⁻, and the anode half E°(Zn²⁺/Zn) = −0.76 V. Find E°cell. Record your answer as a.bc V. Enter the digits a, b and c.
Show the worked solution (try the question first)
- Choose the cathode.
The higher table value is reduced at the cathode.
+0.40 V is higher than −0.76 V
- Subtract.
E°cell is the cathode value minus the anode value.
E°cell = +0.40 V − (−0.76 V) = +1.16 V
- Enter the digits.
The value is 1.16, so a = 1, b = 1 and c = 6.
record 1 1 6
Answer: +1.16 V. Record 1 1 6.
Multiple choice · outcome 30-B2.3kWhich reaction is a disproportionation?
- A. 2H₂O₂ → 2H₂O + O₂
- B. Zn + Cu²⁺ → Zn²⁺ + Cu
- C. 2CuO + C → 2Cu + CO₂
- D. Cl₂ + 2Br⁻ → 2Cl⁻ + Br₂
Show the worked solution (try the question first)
- Find the element that changes in each option.
A disproportionation has one element in one species that is both oxidized and reduced.
- Check option A.
H is +1 throughout. O is −1 in H₂O₂, then −2 in H₂O and 0 in O₂.
O: −1 → −2 (reduced) and −1 → 0 (oxidized)
- Check the others.
In B, C and D, the oxidized element and the reduced element are different elements.
B: Zn and Cu. C: C and Cu. D: Br and Cl
- Choose A.
Only A has one reactant that is oxidized and reduced.
answer A
Why each choice is right or wrong
- A. Correct. Oxygen in H₂O₂ is −1. It falls to −2 in H₂O and rises to 0 in O₂. One reactant is both reduced and oxidized.
- B. Zn is oxidized (0 to +2) and Cu²⁺ is reduced (+2 to 0). Two different elements change.
- C. Cu is reduced (+2 to 0) and C is oxidized (0 to +4). Two different elements change.
- D. Br⁻ is oxidized (−1 to 0) and Cl₂ is reduced (0 to −1). Two different elements change.
Answer: A