RT · Redox titrations · Completed notes

Download the printable PDF

Goals: Explain titrant, analyte, titre, endpoint and equivalence. Use the mole ratio from a balanced redox equation to find an unknown concentration or mass. Scale an aliquot and predict which way an error moves a result.

Slide 1 of 9 · Two solutions, two jobs

Key ideas

A titration finds an unknown concentration by reacting a measured volume of one solution with a solution whose concentration is already known.

The solution in the buret is the titrant. The solution in the flask is the analyte, the one being analysed.

A good titration needs a reaction that goes to completion quickly, a visible change called the endpoint, and carefully measured volumes.

Use a pipette to deliver the analyte and a buret to deliver the titrant. A graduated cylinder is less precise.

Example

A flask holds 25.00 mL of Fe²⁺(aq) of unknown concentration. A buret holds 0.0200 mol/L MnO₄⁻(aq). Which solution is the titrant, which is the analyte, and how does the known solution help find the unknown concentration?

  1. The MnO₄⁻(aq) in the buret is the titrant. Its concentration is known.
  2. The Fe²⁺(aq) in the flask is the analyte. Its concentration is unknown.
  3. The titre of MnO₄⁻ gives moles of titrant. The balanced equation turns that into moles of Fe²⁺.

Try it

A buret holds 0.0150 mol/L MnO₄⁻(aq). A flask holds 10.00 mL of Sn²⁺(aq) of unknown concentration. Name the titrant and the analyte, and say which glassware should measure the 10.00 mL.

  1. The titrant is MnO₄⁻(aq) and the analyte is Sn²⁺(aq).
  2. A pipette measures the 10.00 mL of analyte precisely.

Slide 2 of 9 · Read the buret and use the trials

Key ideas

A buret is numbered from zero at the top, so the readings get larger as liquid leaves.

The volume delivered is called the titre. It equals the final reading minus the initial reading.

Read the curved surface, the meniscus, at eye level. For dark purple permanganate, read the top edge. Record two decimal places.

Repeat the titration and average only the trials that agree within the limit the question states. For a limit of 0.20 mL, the largest and smallest trials kept may differ by at most 0.20 mL.

Example

A buret has an initial reading of 0.40 mL and a final reading of 18.90 mL. Find the titre.

  1. Titre = final reading − initial reading
  2. Titre = 18.90 mL − 0.40 mL = 18.50 mL

Try it

Three trials give titres of 18.50 mL, 18.60 mL and 19.60 mL. Trials may differ by at most 0.20 mL from largest to smallest. Which trials do you average, and what is the average titre?

  1. Keep the first two: 18.60 mL − 18.50 mL = 0.10 mL. That is at most 0.20 mL.
  2. The third is 19.60 mL − 18.60 mL = 1.00 mL above the second. That is outside the limit, so leave it out.
  3. Average = (18.50 mL + 18.60 mL) ÷ 2 = 18.55 mL.

Slide 3 of 9 · The equation sets the mole ratio

Key ideas

The coefficients in a balanced equation count particles, so they also give the mole ratio. In MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺, MnO₄⁻ to Fe²⁺ is 1 : 5.

Manganese goes from +7 to +2, so each MnO₄⁻ gains 5 electrons. Iron goes from +2 to +3, so each Fe²⁺ loses 1 electron.

Electrons lost must equal electrons gained. That is why five Fe²⁺ ions are needed for each MnO₄⁻, and the ratio is not 1 : 1.

E°reaction = E°(oxidizing agent) − E°(reducing agent), using values from the Data Booklet table printed on p. 7. A positive result means the written direction is spontaneous. Acidified MnO₄⁻ or Cr₂O₇²⁻ is usually the strongest oxidizing agent in a titration.

Example

Given in acidic solution: MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Give the mole ratio of Fe²⁺ to MnO₄⁻ and explain it with electrons. Then find E°reaction using E°(MnO₄⁻/Mn²⁺) = +1.51 V and E°(Fe³⁺/Fe²⁺) = +0.77 V.

  1. The ratio is 5 mol Fe²⁺ to 1 mol MnO₄⁻, read from the coefficients.
  2. Mn goes from +7 to +2, so each MnO₄⁻ gains 5 e⁻. Fe goes from +2 to +3, so each Fe²⁺ loses 1 e⁻.
  3. Five Fe²⁺ supply the five electrons that one MnO₄⁻ takes.
  4. MnO₄⁻/Mn²⁺ has the higher value, so MnO₄⁻ is the oxidizing agent.
  5. E°reaction = E°(oxidizing agent) − E°(reducing agent) = +1.51 V − (+0.77 V) = +0.74 V
  6. The value is positive, so the written direction is spontaneous.

Try it

Given in acidic solution: 5H₂C₂O₄ + 2MnO₄⁻ + 6H⁺ → 10CO₂ + 2Mn²⁺ + 8H₂O. Give the mole ratio of H₂C₂O₄ to MnO₄⁻. Each carbon atom in H₂C₂O₄ goes from +3 to +4. How many electrons does one H₂C₂O₄ lose?

  1. The ratio is 5 mol H₂C₂O₄ to 2 mol MnO₄⁻.
  2. Each H₂C₂O₄ has 2 carbon atoms, and each carbon goes from +3 to +4, so it loses 1 e⁻.
  3. One H₂C₂O₄ loses 2 e⁻. Five lose 10 e⁻, which equals the 10 e⁻ gained by two MnO₄⁻ (5 e⁻ each).

Slide 4 of 9 · Endpoint: a faint pink that stays

Key ideas

MnO₄⁻ ions are deep purple. Mn²⁺ ions at 0.010 mol/L are colourless, and pale pink at 1.0 mol/L (Data Booklet, p. 11).

Before the reaction is complete, Fe²⁺ reduces each drop of MnO₄⁻, so the purple of the drop disappears. The acid in the flask supplies the H⁺ in the equation.

When all the Fe²⁺ has reacted, the next drop leaves a faint pink-purple colour that stays. This is the endpoint, and permanganate needs no extra indicator.

Equivalence is calculated, and the endpoint is seen. A deep pink means the titre is too large.

Example

A permanganate solution is added from a buret to Fe²⁺(aq) in a flask. What does the flask look like before the reaction is complete, and what tells you to stop?

  1. Before the endpoint, each drop of purple MnO₄⁻ turns colourless as it reacts with Fe²⁺, because Mn²⁺ is colourless at 0.010 mol/L.
  2. Stop at the first faint pink-purple colour that stays. This is the endpoint.

Try it

A student keeps adding permanganate until the flask is deep pink. Is the titre too large, too small or correct? Explain.

  1. The titre is too large.
  2. A deep pink means more MnO₄⁻ was added than the Fe²⁺ needed, so too much titrant was added.

Slide 5 of 9 · The titration calculation

Key ideas

Concentration is moles per litre, so change every volume from mL to L first. Divide by 1000. For example, 18.50 mL = 0.01850 L.

The plan is moles of titrant, then the mole ratio, then moles of analyte, then concentration.

Moles of titrant: n = c × V, where c is concentration in mol/L and V is volume in litres.

Write the ratio fraction with the wanted substance on top. Divide the moles of analyte by the flask volume, never by the titre.

Example

Given the equation MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 25.00 mL sample of Fe²⁺(aq) is titrated with 0.0200 mol/L MnO₄⁻(aq). The average titre is 18.50 mL. Find c(Fe²⁺) in mol/L.

  1. Volumes: titre 18.50 mL = 0.01850 L. Flask 25.00 mL = 0.02500 L.
  2. n(MnO₄⁻) = c × V = 0.0200 mol/L × 0.01850 L = 3.70 × 10⁻⁴ mol
  3. n(Fe²⁺) = 3.70 × 10⁻⁴ mol MnO₄⁻ × (5 mol Fe²⁺ ÷ 1 mol MnO₄⁻) = 1.85 × 10⁻³ mol
  4. c(Fe²⁺) = n ÷ V = 1.85 × 10⁻³ mol ÷ 0.02500 L = 0.0740 mol/L. This has three significant digits, from 0.0200 mol/L.
  5. Check: 0.0740 mol/L × 0.02500 L = 1.85 × 10⁻³ mol

Try it

Given the same equation. A 20.00 mL sample of Fe²⁺(aq) is titrated with 0.0250 mol/L MnO₄⁻(aq). The average titre is 16.80 mL. Find c(Fe²⁺) in mol/L.

  1. Volumes: titre 16.80 mL = 0.01680 L. Flask 20.00 mL = 0.02000 L.
  2. n(MnO₄⁻) = 0.0250 mol/L × 0.01680 L = 4.20 × 10⁻⁴ mol
  3. n(Fe²⁺) = 4.20 × 10⁻⁴ mol × 5 = 2.10 × 10⁻³ mol
  4. c(Fe²⁺) = 2.10 × 10⁻³ mol ÷ 0.02000 L = 0.105 mol/L

Slide 6 of 9 · Method: how to do a redox titration calculation

Key ideas

Step 1. Average the trials that agree within the limit.

Step 2. Change mL to L by dividing by 1000.

Step 3. Find n = cV for the solution you know.

Step 4. Use the mole ratio from the balanced equation, with the wanted substance on top.

Step 5. Find the unknown with c = n ÷ V. Use the volume of the sample in the flask.

Check: multiply back. c × V must give the moles you found.

Example

Use the method on 25.00 mL of Fe²⁺(aq) titrated with 0.0200 mol/L MnO₄⁻(aq). The average titre is 18.50 mL. The equation is MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Find c(Fe²⁺).

  1. Step 2: 18.50 mL = 0.01850 L and 25.00 mL = 0.02500 L.
  2. Step 3: n(MnO₄⁻) = 0.0200 mol/L × 0.01850 L = 3.70 × 10⁻⁴ mol.
  3. Step 4: n(Fe²⁺) = 5 × 3.70 × 10⁻⁴ mol = 1.85 × 10⁻³ mol.
  4. Step 5: c(Fe²⁺) = 1.85 × 10⁻³ mol ÷ 0.02500 L = 0.0740 mol/L.

Try it

Use the method on 20.00 mL of a Fe²⁺ solution that needs 15.00 mL of 0.0200 mol/L MnO₄⁻ with the same equation. Find c(Fe²⁺).

  1. n(MnO₄⁻) = 0.0200 mol/L × 0.01500 L = 3.00 × 10⁻⁴ mol.
  2. n(Fe²⁺) = 5 × 3.00 × 10⁻⁴ mol = 1.50 × 10⁻³ mol.
  3. c(Fe²⁺) = 1.50 × 10⁻³ mol ÷ 0.02000 L = 0.0750 mol/L.

Slide 7 of 9 · Your turn: a different ratio

Key ideas

The steps are the same for every titration, but the ratio comes from the equation you are given.

In 5H₂C₂O₄ + 2MnO₄⁻ + 6H⁺ → 10CO₂ + 2Mn²⁺ + 8H₂O, H₂C₂O₄ to MnO₄⁻ is 5 : 2, so we multiply by 5/2.

The ratio goes from the known substance to the wanted substance, with the coefficient of the wanted substance on top.

Two common slips are a wrong ratio and an upside-down fraction. Check by multiplying the answer by the flask volume.

Example

Given 5H₂C₂O₄ + 2MnO₄⁻ + 6H⁺ → 10CO₂ + 2Mn²⁺ + 8H₂O. A 20.00 mL sample of H₂C₂O₄(aq) needs 16.30 mL of 0.0150 mol/L MnO₄⁻(aq) to reach the endpoint. Find c(H₂C₂O₄) in mol/L.

  1. Titre: 16.30 mL = 0.01630 L. Sample: 20.00 mL = 0.02000 L.
  2. n(MnO₄⁻) = 0.0150 mol/L × 0.01630 L = 2.445 × 10⁻⁴ mol
  3. n(H₂C₂O₄) = 2.445 × 10⁻⁴ mol × (5 ÷ 2) = 6.1125 × 10⁻⁴ mol
  4. c(H₂C₂O₄) = 6.1125 × 10⁻⁴ mol ÷ 0.02000 L = 0.03056 mol/L, which rounds to 0.0306 mol/L
  5. Check: 0.0306 mol/L × 0.02000 L = 6.12 × 10⁻⁴ mol, which matches.

Try it

Given the same equation. A 25.00 mL sample of H₂C₂O₄(aq) needs 14.50 mL of 0.0120 mol/L MnO₄⁻(aq) to reach the endpoint. Find c(H₂C₂O₄) in mol/L.

  1. Titre: 14.50 mL = 0.01450 L. Sample: 25.00 mL = 0.02500 L.
  2. n(MnO₄⁻) = 0.0120 mol/L × 0.01450 L = 1.74 × 10⁻⁴ mol
  3. n(H₂C₂O₄) = 1.74 × 10⁻⁴ mol × (5 ÷ 2) = 4.35 × 10⁻⁴ mol
  4. c(H₂C₂O₄) = 4.35 × 10⁻⁴ mol ÷ 0.02500 L = 0.0174 mol/L

Slide 8 of 9 · An aliquot from a larger solution

Key ideas

A measured part of a larger solution is called an aliquot. The moles found by titrating it are the moles in the aliquot only.

Whole ÷ part = whole volume ÷ aliquot volume. Here 100.0 mL ÷ 20.00 mL = 5.000.

The whole solution has the same concentration, so it holds 5.000 times the moles of the aliquot.

Mass = n × M, where M is molar mass in g/mol. Mass percent = mass of iron ÷ mass of the tablet × 100.

Example

An iron tablet of mass 0.800 g is dissolved and made up to 100.0 mL of Fe²⁺(aq). A 20.00 mL aliquot needs 14.10 mL of 0.0200 mol/L MnO₄⁻(aq). The equation is MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. Find the mass of iron in the tablet and the mass percent of iron (Fe: 55.85 g/mol).

  1. Titre: 14.10 mL = 0.01410 L.
  2. n(MnO₄⁻) = 0.0200 mol/L × 0.01410 L = 2.82 × 10⁻⁴ mol
  3. n(Fe²⁺) in the aliquot = 5 × 2.82 × 10⁻⁴ mol = 1.41 × 10⁻³ mol
  4. Whole ÷ part = 100.0 mL ÷ 20.00 mL = 5.000
  5. n(Fe²⁺) in the whole solution = 1.41 × 10⁻³ mol × 5.000 = 7.05 × 10⁻³ mol
  6. m(Fe) = 7.05 × 10⁻³ mol × 55.85 g/mol = 0.3937 g, which rounds to 0.394 g
  7. Mass percent = 0.3937 g ÷ 0.800 g × 100 = 49.2 %

Try it

Given the same equation. An iron tablet of mass 0.500 g is dissolved and made up to 250.0 mL of Fe²⁺(aq). A 25.00 mL aliquot needs 13.40 mL of 0.0100 mol/L MnO₄⁻(aq). Find the mass of iron in the tablet and the mass percent of iron (Fe: 55.85 g/mol).

  1. Titre: 13.40 mL = 0.01340 L.
  2. n(MnO₄⁻) = 0.0100 mol/L × 0.01340 L = 1.34 × 10⁻⁴ mol
  3. n(Fe²⁺) in the aliquot = 5 × 1.34 × 10⁻⁴ mol = 6.70 × 10⁻⁴ mol
  4. Whole ÷ part = 250.0 mL ÷ 25.00 mL = 10.00
  5. n(Fe²⁺) in the whole solution = 6.70 × 10⁻⁴ mol × 10.00 = 6.70 × 10⁻³ mol
  6. m(Fe) = 6.70 × 10⁻³ mol × 55.85 g/mol = 0.3742 g, which rounds to 0.374 g
  7. Mass percent = 0.3742 g ÷ 0.500 g × 100 = 74.8 %

Slide 9 of 9 · Which way does an error push the answer?

Key ideas

Follow the chain. The titre sets the moles of titrant, which set the moles of analyte, which set the concentration.

Adding too much titrant makes the titre too large, so the calculated c(Fe²⁺) is too high.

A buret rinsed with water makes the titrant weaker, so more volume is needed and the titre is too large. The calculation still uses the given concentration, so c is too high.

A wet flask adds no moles of Fe²⁺, so the result is unchanged. For each error, mark every step larger, smaller or unchanged.

Example

A student rinses the buret with water, then fills it with 0.0200 mol/L MnO₄⁻(aq) and titrates Fe²⁺(aq). Is the calculated c(Fe²⁺) too high, too low or unchanged? Follow the chain.

  1. The water film makes the titrant weaker, so each millilitre holds fewer moles of MnO₄⁻.
  2. More volume is needed to reach the endpoint, so the titre is too large.
  3. The calculation still uses 0.0200 mol/L, so n(MnO₄⁻) is too large, then n(Fe²⁺) is too large, so c(Fe²⁺) is too high.

Try it

A student stops the titration just before the faint pink colour appears. Is the calculated c(Fe²⁺) too high, too low or unchanged? Follow the chain.

  1. The titre is too small.
  2. Then n(MnO₄⁻) and n(Fe²⁺) are too small, so c(Fe²⁺) is too low.

Practice 1

Given buret readings: initial 2.15 mL and final 21.85 mL. Find the titre.

Titre = final − initial = 21.85 − 2.15 = 19.70 mL.

Practice 2

Given MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 25.00 mL sample of Fe²⁺(aq) needs 22.40 mL of 0.0150 mol/L MnO₄⁻(aq). Find c(Fe²⁺) in mol/L.

Use Method: how to do a redox titration calculation. n(MnO₄⁻) = 0.0150 mol/L × 0.02240 L (22.40 mL ÷ 1000) = 3.36 × 10⁻⁴ mol. n(Fe²⁺) = 5 × 3.36 × 10⁻⁴ = 1.68 × 10⁻³ mol. c = 1.68 × 10⁻³ ÷ 0.02500 = 0.0672 mol/L.

Practice 3

Given 5H₂C₂O₄ + 2MnO₄⁻ + 6H⁺ → 10CO₂ + 2Mn²⁺ + 8H₂O. A 10.00 mL sample of H₂C₂O₄(aq) needs 12.60 mL of 0.0200 mol/L MnO₄⁻(aq). Find c(H₂C₂O₄) in mol/L.

Use Method: how to do a redox titration calculation. n(MnO₄⁻) = 0.0200 mol/L × 0.01260 L (12.60 mL ÷ 1000) = 2.52 × 10⁻⁴ mol. n(H₂C₂O₄) = 2.52 × 10⁻⁴ × 5/2 = 6.30 × 10⁻⁴ mol. c = 6.30 × 10⁻⁴ ÷ 0.01000 = 0.0630 mol/L.

Practice 4

Given MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺. A 10.00 mL aliquot from a 250.0 mL flask of Fe²⁺(aq) needs 15.60 mL of 0.0100 mol/L MnO₄⁻(aq). Find the mass of iron in the whole flask (Fe: 55.85 g/mol, Alberta Chemistry 30 Data Booklet).

n(MnO₄⁻) = 0.0100 mol/L × 0.01560 L (15.60 mL ÷ 1000) = 1.56 × 10⁻⁴ mol. n(Fe²⁺) in the aliquot = 5 × 1.56 × 10⁻⁴ = 7.80 × 10⁻⁴ mol. Scale by 250.0 ÷ 10.00 = 25.00: 1.95 × 10⁻² mol. Mass = 1.95 × 10⁻² × 55.85 = 1.09 g.

Practice 5

A student reads the final buret reading 0.50 mL too large in a permanganate titration of Fe²⁺. Is the calculated c(Fe²⁺) too high, too low or unchanged? Explain with the chain of calculation.

Too high. The titre is final minus initial, so it is 0.50 mL too large. Then n(MnO₄⁻), n(Fe²⁺) and c(Fe²⁺) are all too large.

Practice 6

Explain why a permanganate titration of iron(II) needs no added indicator, and describe the endpoint colour.

Permanganate is purple and is reduced to colourless Mn²⁺ while iron(II) remains. After the last Fe²⁺ reacts, one extra drop leaves a faint pink-purple that stays, so the titrant is its own indicator.

Practice 7

Challenge: Given Cr₂O₇²⁻ + 14H⁺ + 6Fe²⁺ → 2Cr³⁺ + 7H₂O + 6Fe³⁺. An iron sample is dissolved and made up to 100.0 mL. A 20.00 mL aliquot needs 14.80 mL of 0.0100 mol/L Cr₂O₇²⁻(aq). Find the mass of iron in the whole sample, in grams, to three significant digits (M(Fe) = 55.85 g/mol, from the Data Booklet).

Titrant: n(Cr₂O₇²⁻) = 0.01480 L × 0.0100 mol/L = 1.480 × 10⁻⁴ mol. Mole ratio 6 Fe²⁺ to 1 Cr₂O₇²⁻: n(Fe²⁺) in the aliquot = 6 × 1.480 × 10⁻⁴ = 8.880 × 10⁻⁴ mol. Scale up: the flask is 100.0 ÷ 20.00 = 5 times the aliquot, so n(Fe²⁺) in the sample = 4.440 × 10⁻³ mol. Mass: m = 4.440 × 10⁻³ mol × 55.85 g/mol = 0.248 g.

The PDF key follows the slides, with worked answers.