B9 · Electrolysis of aqueous solutions · Completed notes
Download the printable PDF
Goals: Decide what is reduced and what is oxidized when a solution is electrolyzed, using the table. Explain the chloride exception and why E° values are used with caution. Predict products, colour, mass and pH changes and write the cell reaction.
Slide 1 of 8 · Water joins the competition
Key ideas
In a molten salt only the salt ions can react. In a water solution, water molecules are present too, so water can react at either electrode.
At the cathode, water can be reduced: 2H₂O + 2e⁻ → H₂ + 2OH⁻. Its table value is −0.83 V.
At the anode, water can be oxidized: 2H₂O → O₂ + 4H⁺ + 4e⁻. This is the +1.23 V row written in reverse.
At the cathode, whatever has the highest table value is reduced. At the anode, whatever has the lowest value is oxidized.
Example
An ionic compound is dissolved in water. The cell has two inert electrodes and a power source. What competes to be reduced at the cathode, and what competes to be oxidized at the anode?
- Cathode: the cations compete with water (−0.83 V). The highest value is reduced.
- Anode: the anions compete with water (+1.23 V row, reversed). The lowest value is oxidized.
- Inert electrodes do not react, so they are not in the competition.
Try it
In molten NaCl only Na⁺ and Cl⁻ can react. List everything that can react at each electrode when NaCl is dissolved in water instead.
- Cathode: Na⁺ and water can be reduced.
- Anode: Cl⁻ and water can be oxidized.
- Water is the extra competitor at both electrodes.
Slide 2 of 8 · Choose the cathode reaction
Key ideas
Inert means the electrode does not react. Compare each cation with water at −0.83 V, and the one with the higher value is reduced.
In NaCl(aq), Na⁺ is −2.71 V and water is −0.83 V, so water is reduced. The pH near the cathode rises, because OH⁻ is made.
In CuSO₄(aq), Cu²⁺ is +0.34 V, higher than water, so Cu²⁺ + 2e⁻ → Cu. The cathode gains mass and the blue colour fades.
A cation with a value above −0.83 V is predicted to be reduced before water. A close call such as Zn²⁺ (−0.76 V) is only a weak prediction. Sodium, magnesium and aluminium lose to water.
Example
Aqueous NaCl is electrolyzed with inert electrodes. The table values are Na⁺ −2.71 V and water −0.83 V. What is reduced at the cathode, what is the half-reaction, and what happens to the pH near the cathode?
- Water (−0.83 V) is higher than Na⁺ (−2.71 V), so water is reduced.
- Reduction: 2H₂O + 2e⁻ → H₂ + 2OH⁻
- OH⁻ is made, so the pH near the cathode rises. No sodium metal forms.
Try it
Aqueous CuSO₄ is electrolyzed with inert electrodes. The table values are Cu²⁺ +0.34 V and water −0.83 V. What is reduced, and what happens to the cathode mass and the blue colour?
- Cu²⁺ (+0.34 V) is higher than water (−0.83 V), so Cu²⁺ is reduced.
- Reduction: Cu²⁺ + 2e⁻ → Cu
- Copper deposits, so the cathode gains mass. The blue colour fades as Cu²⁺ is used up.
Slide 3 of 8 · Choose the anode reaction
Key ideas
At the anode, compare the anions, water and a reactive electrode. The one with the lowest value is oxidized.
In NaI(aq), I⁻ (+0.54 V) is lower than water (+1.23 V), so 2I⁻ → I₂ + 2e⁻. Iodine makes the solution near the anode brown.
Sulfate has no row in the table as an oxidation, so only water reacts: 2H₂O → O₂ + 4H⁺ + 4e⁻. The pH near the anode falls.
An ion that does not react at either electrode, such as Na⁺, is a spectator ion. A reactive metal anode can be oxidized itself.
Example
Aqueous NaI is electrolyzed with inert electrodes. The values are I₂/I⁻ +0.54 V and water +1.23 V (O₂/H₂O row). What is oxidized at the anode, and what is seen near it?
- I⁻ (+0.54 V) is lower than water (+1.23 V), so iodide is oxidized.
- Oxidation: 2I⁻ → I₂ + 2e⁻
- Iodine forms, so the solution near the anode turns brown.
Try it
CuSO₄(aq) has a copper anode. The values are Cu²⁺/Cu +0.34 V and water +1.23 V (O₂/H₂O row). What is oxidized at the anode, and what happens to the anode mass?
- Cu (+0.34 V) is lower than water (+1.23 V), so the copper anode is oxidized.
- Oxidation: Cu → Cu²⁺ + 2e⁻
- The anode dissolves, so it loses mass.
Slide 4 of 8 · The chloride exception and caution with E°
Key ideas
In NaCl(aq) the anode choices are Cl⁻ at +1.36 V and water at +1.23 V. Water is lower, so the table predicts oxygen.
In a real cell, chlorine gas forms: 2Cl⁻ → Cl₂ + 2e⁻. This difference is called the chloride anomaly.
Overvoltage is the extra voltage a reaction needs to run at a useful rate. Water oxidation needs a greater overvoltage than chloride oxidation.
A table value is a first prediction, not a promise. The table minimum voltage may not be enough to make water react. Predict from the table, then check for known exceptions, like chloride.
Example
Aqueous NaCl is electrolyzed with inert electrodes. The values are Cl₂/Cl⁻ +1.36 V and O₂/H₂O +1.23 V. What gas does the table predict at the anode, what gas is observed, and why?
- Water (+1.23 V) is lower than Cl⁻ (+1.36 V), so the table predicts water is oxidized and O₂ forms.
- Observed: Cl₂ forms, 2Cl⁻ → Cl₂ + 2e⁻. This is the chloride anomaly.
- Reason: oxidizing water needs a greater overvoltage than oxidizing chloride.
Try it
In aqueous NaCl, by how many volts do E°(Cl₂/Cl⁻) = +1.36 V and E°(O₂/H₂O) = +1.23 V differ? Which gas actually forms at the anode?
- Difference: 1.36 − 1.23 = 0.13 V.
- The values are close, but overvoltage makes chloride react, so Cl₂ forms, not O₂.
Slide 5 of 8 · Method: how to predict the products of electrolysis of a solution
Key ideas
Step 1. List every ion, and water.
Step 2. Cathode: choose the reduction with the higher E°. Water is at −0.83 V.
Step 3. Anode: choose the oxidation with the lower E°. Water is at +1.23 V.
Step 4. Check for exceptions: chloride and a reactive electrode.
Step 5. Write the halves, the overall equation and the observations. Close E° values are a weak prediction.
Example
Use the method on CuSO₄(aq) with inert carbon electrodes. Predict the product at each electrode and what is seen.
- Step 1: Cu²⁺, SO₄²⁻ and H₂O.
- Step 2: Cu²⁺ (+0.34 V) is higher than water (−0.83 V), so Cu²⁺ + 2e⁻ → Cu.
- Step 3: sulfate is not oxidized, so 2H₂O → O₂ + 4H⁺ + 4e⁻.
- Steps 4 and 5: no exception applies. 2Cu²⁺ + 2H₂O → 2Cu + O₂ + 4H⁺. Copper deposits, oxygen bubbles form, the blue fades and the pH falls.
Try it
Use the method on KI(aq) with inert electrodes. E°(I₂/I⁻) = +0.54 V. What forms at each electrode?
- Cathode: K⁺ is far lower than water, so water is reduced: 2H₂O + 2e⁻ → H₂ + 2OH⁻.
- Anode: iodide (+0.54 V) is lower than water (+1.23 V), so 2I⁻ → I₂ + 2e⁻.
- Hydrogen forms at the cathode and iodine at the anode.
Slide 6 of 8 · Your turn: aqueous sodium bromide
Key ideas
At the cathode, Na⁺ is −2.71 V and water is −0.83 V. Water is higher, so 2H₂O + 2e⁻ → H₂ + 2OH⁻, and the pH rises.
At the anode, Br⁻ is +1.07 V and water is +1.23 V. Bromide is lower, so 2Br⁻ → Br₂ + 2e⁻. Brown-orange colour is observed near the anode.
Both half-reactions move 2 electrons, so no multiplier is needed. Add the halves and cancel the electrons.
E°reaction = E°cathode − E°anode = −0.83 − (+1.07) = −1.90 V. The power source must supply more than 1.90 V.
Example
Aqueous NaBr is electrolyzed with inert electrodes. The values are Na⁺ −2.71 V, water −0.83 V, Br₂/Br⁻ +1.07 V and O₂/H₂O +1.23 V. Predict the product at each electrode, write the cell reaction and find E°reaction and the minimum voltage.
- Cathode: water (−0.83 V) is higher than Na⁺, so 2H₂O + 2e⁻ → H₂ + 2OH⁻
- Anode: Br⁻ (+1.07 V) is lower than water, so 2Br⁻ → Br₂ + 2e⁻
- Cell reaction: 2Br⁻ + 2H₂O → Br₂ + H₂ + 2OH⁻ (atoms and a charge of −2 match on both sides).
- E°reaction = E°cathode − E°anode = −0.83 − (+1.07) = −1.90 V
- The source must supply more than 1.90 V. The pH rises near the cathode.
Try it
Aqueous CuBr₂ is electrolyzed with inert electrodes. The values are Cu²⁺ +0.34 V, water −0.83 V, Br₂/Br⁻ +1.07 V and O₂/H₂O +1.23 V. Write the cell reaction and find E°reaction.
- Cathode: Cu²⁺ (+0.34 V) is higher than water, so Cu²⁺ + 2e⁻ → Cu
- Anode: Br⁻ (+1.07 V) is lower than water, so 2Br⁻ → Br₂ + 2e⁻
- Cell reaction: Cu²⁺ + 2Br⁻ → Cu + Br₂ (a charge of 0 on both sides).
- E°reaction = 0.34 − 1.07 = −0.73 V, so the source must supply more than 0.73 V.
Slide 7 of 8 · Predict observations: copper sulfate
Key ideas
At the cathode, Cu²⁺ (+0.34 V) beats water (−0.83 V): Cu²⁺ + 2e⁻ → Cu. The cathode gains mass and the blue colour fades.
At the anode, sulfate is not oxidized, so water is: 2H₂O → O₂ + 4H⁺ + 4e⁻. Oxygen bubbles form and the pH falls.
The copper half moves 2 electrons and the water half moves 4. Multiply the copper half by 2 so the electrons match. E° values are never multiplied.
Overall: 2Cu²⁺ + 2H₂O → 2Cu + O₂ + 4H⁺. E°reaction = 0.34 − 1.23 = −0.89 V.
Example
CuSO₄(aq) is electrolyzed with inert carbon electrodes. The values are Cu²⁺ +0.34 V, water −0.83 V and O₂/H₂O +1.23 V. Predict what is seen at each electrode, write the cell reaction and find E°reaction.
- Cathode: Cu²⁺ + 2e⁻ → Cu. The cathode gains mass and the blue colour fades.
- Anode: 2H₂O → O₂ + 4H⁺ + 4e⁻. Oxygen bubbles form and the pH falls near the anode.
- Multiply the cathode half by 2 so that both halves move 4 electrons.
- Cell reaction: 2Cu²⁺ + 2H₂O → 2Cu + O₂ + 4H⁺ (a charge of +4 on both sides).
- E°reaction = 0.34 − 1.23 = −0.89 V, so the source must supply more than 0.89 V.
Try it
AgNO₃(aq) is electrolyzed with inert electrodes. The values are Ag⁺ +0.80 V, water −0.83 V and O₂/H₂O +1.23 V. Nitrate is not oxidized. Write the cell reaction and find E°reaction.
- Cathode: Ag⁺ (+0.80 V) is higher than water, so Ag⁺ + e⁻ → Ag
- Anode: water is oxidized, 2H₂O → O₂ + 4H⁺ + 4e⁻
- Multiply the silver half by 4: 4Ag⁺ + 4e⁻ → 4Ag
- Cell reaction: 4Ag⁺ + 2H₂O → 4Ag + O₂ + 4H⁺ (a charge of +4 on both sides).
- E°reaction = 0.80 − 1.23 = −0.43 V. The pH falls near the anode.
Slide 8 of 8 · Sodium sulfate: when neither ion reacts
Key ideas
In Na₂SO₄(aq), Na⁺ is lower than water and sulfate is not oxidized. So water reacts at both electrodes.
Cathode: 2H₂O + 2e⁻ → H₂ + 2OH⁻, so the pH rises and red litmus turns blue. Anode: 2H₂O → O₂ + 4H⁺ + 4e⁻, so the pH falls and blue litmus turns red.
Double the cathode half so both halves move 4 electrons: 4H₂O + 4e⁻ → 2H₂ + 4OH⁻.
Adding the halves, 4OH⁻ and 4H⁺ make 4H₂O. The overall reaction is 2H₂O → 2H₂ + O₂, so the mole ratio of H₂ to O₂ is 2 to 1.
Example
Na₂SO₄(aq) is electrolyzed with inert electrodes. Neither ion reacts. What happens at each electrode, and what is the overall reaction?
- Cathode: water is reduced, 2H₂O + 2e⁻ → H₂ + 2OH⁻. The pH rises.
- Anode: water is oxidized, 2H₂O → O₂ + 4H⁺ + 4e⁻. The pH falls.
- Double the cathode half: 4H₂O + 4e⁻ → 2H₂ + 4OH⁻
- Add: 6H₂O → 2H₂ + O₂ + 4OH⁻ + 4H⁺. Then 4OH⁻ + 4H⁺ → 4H₂O.
- Overall: 2H₂O → 2H₂ + O₂
Try it
A cell with Na₂SO₄(aq) and inert electrodes makes 0.0300 mol of O₂. How many moles of H₂ form at the same time?
- The overall reaction 2H₂O → 2H₂ + O₂ gives 2 mol H₂ for each 1 mol O₂.
- n(H₂) = 2 × 0.0300 = 0.0600 mol
Practice 1
Given NaNO₃(aq) with inert electrodes, decide what is reduced at the cathode and write the half-reaction (Data Booklet table values: Na⁺ −2.71 V; water −0.83 V).
Water is reduced because −0.83 V is higher than −2.71 V. Reduction: 2H₂O + 2e⁻ → H₂ + 2OH⁻.
Practice 2
Given aqueous NaI with inert electrodes (Data Booklet table values: I₂/I⁻ +0.54 V; O₂/H₂O +1.23 V; water −0.83 V; Na⁺ −2.71 V). Write the half-reaction at each electrode, the cell reaction and E°reaction.
Use Method: how to predict the products of electrolysis of a solution. Cathode: 2H₂O + 2e⁻ → H₂ + 2OH⁻. Anode: 2I⁻ → I₂ + 2e⁻. Cell reaction: 2I⁻ + 2H₂O → I₂ + H₂ + 2OH⁻. E°reaction = −0.83 − 0.54 = −1.37 V.
Practice 3
Aqueous NaCl is electrolyzed with inert electrodes. State the product at the anode that the table predicts, the product that is observed, and the reason for the difference.
The table predicts oxygen from water (+1.23 V is lower than +1.36 V). Chlorine is observed. The overvoltage for oxidizing water is greater than for chloride, so chloride is oxidized.
Practice 4
Given NaBr(aq) with inert electrodes. Predict the colour change near the anode and the pH change near the cathode, and explain both with half-reactions.
We would observe a brown-orange colour near the anode and bubbles at the cathode. We infer that 2Br⁻ → Br₂ + 2e⁻ makes bromine, and that 2H₂O + 2e⁻ → H₂ + 2OH⁻ makes hydroxide, so the pH near the cathode rises.
Practice 5
Given CuSO₄(aq) with a copper cathode and a copper anode. Predict the change in mass of each electrode and the change in the blue colour (Data Booklet table values: Cu²⁺/Cu +0.34 V; O₂/H₂O +1.23 V; water −0.83 V).
The cathode gains mass (Cu²⁺ + 2e⁻ → Cu). The copper anode loses mass (Cu → Cu²⁺ + 2e⁻), because copper is lower than water. The blue colour stays about the same because Cu²⁺ is replaced as it is used.
Practice 6
Given Na₂SO₄(aq) with inert electrodes. Write the overall cell reaction and say which gas forms in the larger amount.
Reduction: 4H₂O + 4e⁻ → 2H₂ + 4OH⁻. Oxidation: 2H₂O → O₂ + 4H⁺ + 4e⁻. Overall: 2H₂O → 2H₂ + O₂. Hydrogen forms in the larger amount, 2 mol for each 1 mol of O₂.
Practice 7
Challenge: Given a solution that contains Cu(NO₃)₂(aq) and Zn(NO₃)₂(aq), electrolyzed with inert electrodes. Nitrate ions do not react. Data Booklet table values: Cu²⁺/Cu +0.34 V; Zn²⁺/Zn −0.76 V; water reduced −0.83 V; O₂/H₂O +1.23 V. Which metal plates on the cathode first? Write both half-reactions and predict the pH change near the anode.
Cathode: list what can be reduced: Cu²⁺ (+0.34 V), Zn²⁺ (−0.76 V) and water (−0.83 V). The highest value is reduced first, so copper plates first: Cu²⁺ + 2e⁻ → Cu. Zinc plates only after the Cu²⁺ is used up. Anode: nitrate does not react and the electrodes are inert, so water is oxidized: 2H₂O → O₂ + 4H⁺ + 4e⁻. H⁺ forms, so the pH near the anode falls.
The PDF key follows the slides, with worked answers.