B7 · Reduction potentials and the hydrogen reference · Completed notes

Download the printable PDF

Goals: Explain why every potential is measured against the standard hydrogen reference. Use the table to build a cell from any two half-cells, with inert electrodes when needed. Calculate E°cell, predict observations and say what the sign does and does not tell us.

Slide 1 of 8 · One reference point for every half-cell

Key ideas

A voltmeter reads the push between two half-cells, so chemists chose one half-cell as the reference and set its value to exactly 0.00 V.

The standard hydrogen half-cell is 2H⁺ + 2e⁻ → H₂, with H⁺ at 1.0 mol/L and H₂ gas at 101.325 kPa.

Electrons flow away from the anode and toward the cathode. Use E°cell = E°cathode − E°anode and solve for the unknown half-cell value.

When the reference is the cathode, the unknown value is negative. When the reference is the anode, the unknown value is positive.

Example

A zinc half-cell is joined to the standard hydrogen half-cell. The voltmeter reads 0.76 V and electrons flow from the zinc half-cell toward the hydrogen half-cell. Find E°(Zn²⁺/Zn).

  1. Electrons leave the anode, so zinc is the anode and hydrogen is the cathode.
  2. E°cell = E°cathode − E°anode, so 0.76 V = 0.00 V − E°(Zn²⁺/Zn)
  3. E°(Zn²⁺/Zn) = −0.76 V

Try it

A copper half-cell is joined to the standard hydrogen half-cell. The voltmeter reads 0.34 V and electrons flow toward the copper half-cell. Find E°(Cu²⁺/Cu).

  1. Electrons go toward the cathode, so copper is the cathode and hydrogen is the anode.
  2. E°cell = E°cathode − E°anode, so 0.34 V = E°(Cu²⁺/Cu) − 0.00 V
  3. E°(Cu²⁺/Cu) = +0.34 V

Slide 2 of 8 · Reading the table: all values are reductions

Key ideas

Every row in the table is written as a reduction, with the electrons on the left side.

The strongest oxidizing agent is on the left side and has the highest value.

The strongest reducing agent is on the right side and has the lowest value.

If something is oxidized in a cell, still use its reduction row value as printed. Flipping the sign and then subtracting counts the sign change twice.

Example

Given Ag⁺ + e⁻ → Ag (+0.80 V), Cu²⁺ + 2e⁻ → Cu (+0.34 V) and Zn²⁺ + 2e⁻ → Zn (−0.76 V). Which of these is the strongest oxidizing agent and which is the strongest reducing agent? Rank each group.

  1. Strongest oxidizing agent: Ag⁺, on the left with the highest value (+0.80 V).
  2. Strongest reducing agent: Zn, on the right with the lowest value (−0.76 V).
  3. Oxidizing agents: Ag⁺ > Cu²⁺ > Zn²⁺. Reducing agents: Zn > Cu > Ag.

Try it

Given Br₂ + 2e⁻ → 2Br⁻ (+1.07 V), Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and I₂ + 2e⁻ → 2I⁻ (+0.54 V). Name the strongest oxidizing agent and the strongest reducing agent among all six.

  1. Strongest oxidizing agent: Br₂, on the left of the row with the highest value (+1.07 V).
  2. Strongest reducing agent: I⁻, on the right of the row with the lowest value (+0.54 V).

Slide 3 of 8 · A cell from any two half-cells

Key ideas

Compare the two table values. The half with the higher value is reduced at the cathode. The other half runs backwards as the oxidation at the anode.

The anode half 2I⁻ → I₂ + 2e⁻ gives 2 electrons, and each Fe³⁺ takes 1, so multiply the iron half by 2.

The cell reaction is 2Fe³⁺ + 2I⁻ → 2Fe²⁺ + I₂. Check the charge: both sides total +4.

E°cell = E°cathode − E°anode = +0.23 V. E° is energy for each unit of charge, so it is not multiplied when a half-reaction is.

Example

Given Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and I₂ + 2e⁻ → 2I⁻ (+0.54 V). Build the cell reaction and find E°cell.

  1. Fe³⁺/Fe²⁺ has the higher value, so Fe³⁺ is reduced at the cathode. I⁻ is oxidized at the anode.
  2. Reduction: Fe³⁺ + e⁻ → Fe²⁺. Oxidation: 2I⁻ → I₂ + 2e⁻
  3. Multiply the iron half by 2: 2Fe³⁺ + 2e⁻ → 2Fe²⁺
  4. Overall: 2Fe³⁺ + 2I⁻ → 2Fe²⁺ + I₂. Charge is +4 on each side.
  5. E°cell = +0.77 V − (+0.54 V) = +0.23 V

Try it

Given Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and Cu²⁺ + 2e⁻ → Cu (+0.34 V). Build the cell reaction in which Fe³⁺ is reduced and copper is oxidized, and find E°cell.

  1. Fe³⁺/Fe²⁺ has the higher value, so it is the cathode. Copper is the anode.
  2. Reduction: Fe³⁺ + e⁻ → Fe²⁺. Oxidation: Cu → Cu²⁺ + 2e⁻
  3. Multiply the iron half by 2: 2Fe³⁺ + 2e⁻ → 2Fe²⁺
  4. Overall: 2Fe³⁺ + Cu → 2Fe²⁺ + Cu²⁺. Charge is +6 on each side.
  5. E°cell = +0.77 V − (+0.34 V) = +0.43 V

Slide 4 of 8 · Method: how to find E°cell from any two half-cells

Key ideas

Step 1. Write the two table values. Each one is E° for its pair.

Step 2. The lower E° is the anode, so that half is oxidized.

Step 3. The higher E° is the cathode, so that half is reduced.

Step 4. E°cell = E°cathode − E°anode. Do not multiply by coefficients.

Step 5. A positive E°cell means the cell runs by itself.

Example

Use the method on Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and I₂ + 2e⁻ → 2I⁻ (+0.54 V). Find E°cell.

  1. Step 1: +0.77 V and +0.54 V.
  2. Step 2: the lower value is I₂/I⁻, so iodide is oxidized.
  3. Step 3: the higher value is Fe³⁺/Fe²⁺, so Fe³⁺ is reduced.
  4. Steps 4 and 5: E°cell = +0.77 − (+0.54) = +0.23 V. It is positive, so the cell runs by itself.

Try it

Use the method on Br₂ + 2e⁻ → 2Br⁻ (+1.07 V) and Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V). Find E°cell.

  1. Br₂/Br⁻ has the higher value, so it is the cathode. Fe³⁺/Fe²⁺ is the anode.
  2. E°cell = +1.07 − (+0.77) = +0.30 V.
  3. It is positive, so the cell runs by itself.

Slide 5 of 8 · Inert electrodes and notation

Key ideas

An inert electrode does not react. It only gives electrons a surface to enter or leave. Use one when a half-cell has no solid metal.

Carbon is written C(s) in cell notation. Iron metal would not work, because it could react.

In cell notation, a comma separates ions in the same solution. The anode goes on the far left.

Each Fe²⁺ gives 1 electron and each MnO₄⁻ takes 5, so multiply the iron half by 5. E°cell = 1.51 − 0.77 = +0.74 V.

Example

Given MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O (+1.51 V) and Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V). Neither half-cell has a solid metal. Name the electrode, write the cell notation and the overall reaction, and find E°cell.

  1. Use inert carbon electrodes, written C(s).
  2. MnO₄⁻/Mn²⁺ has the higher value, so it is the cathode. The iron half is the anode.
  3. Notation: C(s) | Fe²⁺(aq), Fe³⁺(aq) || MnO₄⁻(aq), H⁺(aq), Mn²⁺(aq) | C(s)
  4. Reduction: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O. Oxidation: 5Fe²⁺ → 5Fe³⁺ + 5e⁻
  5. Overall: MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺
  6. E°cell = +1.51 V − (+0.77 V) = +0.74 V

Try it

Given Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and Cu²⁺ + 2e⁻ → Cu (+0.34 V). Write the cell notation for the cell in which Fe³⁺ is reduced. Say which electrode is carbon, and find E°cell.

  1. Fe³⁺/Fe²⁺ has the higher value, so it is the cathode. Copper is the anode.
  2. The iron half-cell has no solid metal, so it uses a carbon electrode. Copper uses a copper electrode.
  3. Notation: Cu(s) | Cu²⁺(aq) || Fe³⁺(aq), Fe²⁺(aq) | C(s)
  4. E°cell = +0.77 V − (+0.34 V) = +0.43 V

Slide 6 of 8 · Your turn: will bromine oxidize iron(II)?

Key ideas

To oxidize something, an oxidizing agent must itself be reduced, because an oxidizing agent takes electrons.

Br₂ (+1.07 V) has a higher value than Fe³⁺/Fe²⁺ (+0.77 V), so Br₂ is reduced at the cathode.

The iron half gives 1 electron and bromine takes 2, so multiply the iron half by 2. Overall: Br₂ + 2Fe²⁺ → 2Br⁻ + 2Fe³⁺.

E°cell = 1.07 − 0.77 = +0.30 V. A positive sign says the reaction is spontaneous. It predicts direction only, not speed.

Example

Given Br₂ + 2e⁻ → 2Br⁻ (+1.07 V) and Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V). Does Br₂ oxidize Fe²⁺ to Fe³⁺ under standard conditions? Write the cell reaction and find E°cell.

  1. Br₂/Br⁻ has the higher value, so Br₂ is reduced at the cathode.
  2. Reduction: Br₂ + 2e⁻ → 2Br⁻. Oxidation: 2Fe²⁺ → 2Fe³⁺ + 2e⁻
  3. Overall: Br₂ + 2Fe²⁺ → 2Br⁻ + 2Fe³⁺. Br is 2 and Fe is 2 on each side. Charge is +4 on each side.
  4. E°cell = +1.07 V − (+0.77 V) = +0.30 V
  5. The value is positive, so yes, Br₂ oxidizes Fe²⁺ under standard conditions.

Try it

Given I₂ + 2e⁻ → 2I⁻ (+0.54 V) and Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V). Does I₂ oxidize Fe²⁺ to Fe³⁺ under standard conditions? Write the reaction and find E°cell for it as written.

  1. For I₂ to oxidize Fe²⁺, I₂ is reduced (cathode, +0.54 V) and Fe²⁺ is oxidized (anode, +0.77 V).
  2. Overall: I₂ + 2Fe²⁺ → 2I⁻ + 2Fe³⁺. Charge is +4 on each side.
  3. E°cell = +0.54 V − (+0.77 V) = −0.23 V
  4. The value is negative, so the reaction is not spontaneous as written. I₂ does not oxidize Fe²⁺.

Slide 7 of 8 · Predict what you would see in a cell

Key ideas

At the cathode, purple MnO₄⁻ is reduced to Mn²⁺, which is colourless at 0.010 mol/L (pale pink at 1.0 mol/L), so the purple fades.

MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O uses up H⁺, so the pH rises. Less H⁺ means a higher pH.

At the anode, Fe²⁺ → Fe³⁺ + e⁻. The Data Booklet (p. 11) lists iron(III) as orange-yellow, so the solution turns that colour.

Carbon electrodes are inert, so their mass does not change. A mass change needs a solid that is made or used up.

Example

The cell C(s) | Fe²⁺(aq), Fe³⁺(aq) || MnO₄⁻(aq), H⁺(aq), Mn²⁺(aq) | C(s) is running. Predict the colour change at each electrode, the pH change near the cathode and the mass change of the electrodes.

  1. Cathode: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O. The purple fades to colourless, since Mn²⁺ is colourless at 0.010 mol/L.
  2. H⁺ is used up, so the pH rises near the cathode.
  3. Anode: Fe²⁺ → Fe³⁺ + e⁻. Fe³⁺ is made, so the solution turns orange-yellow.
  4. Both carbon electrodes are inert, so their masses do not change.

Try it

The cell Cu(s) | Cu²⁺(aq) || Fe³⁺(aq), Fe²⁺(aq) | C(s) is running. Predict the mass change of each electrode and the change in the blue colour of the copper solution.

  1. Anode (Cu): Cu → Cu²⁺ + 2e⁻. The copper electrode loses mass.
  2. Cu²⁺ is made, so the blue colour of the copper solution deepens.
  3. Cathode (C): Fe³⁺ + e⁻ → Fe²⁺. The carbon electrode is inert, so its mass does not change.

Slide 8 of 8 · What E° tells us, and what it does not

Key ideas

In 2Ag + Cu²⁺ → 2Ag⁺ + Cu, Cu²⁺ is reduced, so Cu²⁺/Cu (+0.34 V) is the cathode and Ag⁺/Ag (+0.80 V) is the anode.

E°cell = 0.34 − 0.80 = −0.46 V. A negative value means the reaction is not spontaneous as written under standard conditions.

The reverse reaction, Cu + 2Ag⁺ → Cu²⁺ + 2Ag, has E°cell = +0.46 V, so it is spontaneous.

E° gives the spontaneous direction under standard conditions. It does not give speed, and it does not give voltages at other concentrations.

Example

Given E°(Ag⁺/Ag) = +0.80 V and E°(Cu²⁺/Cu) = +0.34 V. A student studies 2Ag + Cu²⁺ → 2Ag⁺ + Cu. Calculate E°cell for the reaction as written. What does the sign tell you, and which reaction is spontaneous?

  1. Cu²⁺ is reduced (cathode, +0.34 V). Ag is oxidized (anode, +0.80 V).
  2. E°cell = E°cathode − E°anode = +0.34 V − (+0.80 V) = −0.46 V
  3. The value is negative, so the reaction is not spontaneous as written.
  4. The reverse, Cu + 2Ag⁺ → Cu²⁺ + 2Ag, has E°cell = +0.46 V and is spontaneous.

Try it

Given Fe³⁺ + e⁻ → Fe²⁺ (+0.77 V) and Zn²⁺ + 2e⁻ → Zn (−0.76 V). A student studies Zn²⁺ + 2Fe²⁺ → Zn + 2Fe³⁺. Calculate E°cell as written. Is the reaction spontaneous, and does the sign tell us its speed?

  1. Zn²⁺ is reduced (cathode, −0.76 V). Fe²⁺ is oxidized (anode, +0.77 V).
  2. E°cell = −0.76 V − (+0.77 V) = −1.53 V
  3. The value is negative, so the reaction is not spontaneous as written. The reverse reaction is spontaneous.
  4. The sign gives direction only, not speed.

Practice 1

A cell is built from the standard hydrogen half-cell and a nickel half-cell. The voltmeter reads 0.26 V and electrons flow from the nickel electrode toward the hydrogen half-cell. Find E° for Ni²⁺ + 2e⁻ → Ni.

Nickel is the anode and hydrogen is the cathode. E°cell = E°cathode − E°anode, so 0.26 = 0.00 − E°(Ni²⁺/Ni). Then E°(Ni²⁺/Ni) = −0.26 V.

Practice 2

Given these Data Booklet table rows: Ag⁺ + e⁻ → Ag (+0.80 V), Cu²⁺ + 2e⁻ → Cu (+0.34 V) and Zn²⁺ + 2e⁻ → Zn (−0.76 V). Which of these is the strongest reducing agent, and which is the strongest oxidizing agent?

The strongest reducing agent is Zn, because Zn²⁺/Zn has the lowest value. The strongest oxidizing agent is Ag⁺, because it has the highest value.

Practice 3

Given these Data Booklet table rows: I₂ + 2e⁻ → 2I⁻ (+0.54 V) and Cl₂ + 2e⁻ → 2Cl⁻ (+1.36 V). Write the cell reaction for the cell in which chlorine oxidizes iodide and calculate E°cell.

Use Method: how to find E°cell from any two half-cells. Cl₂ has the higher value, so it is the cathode. Reduction: Cl₂ + 2e⁻ → 2Cl⁻. Oxidation: 2I⁻ → I₂ + 2e⁻. Cell reaction: Cl₂ + 2I⁻ → 2Cl⁻ + I₂. E°cell = 1.36 − 0.54 = +0.82 V.

Practice 4

Write the cell notation for the cell in which MnO₄⁻ (acidic) oxidizes Fe²⁺, using carbon electrodes. Name the anode and give E°cell (Data Booklet table values: MnO₄⁻/Mn²⁺ +1.51 V; Fe³⁺/Fe²⁺ +0.77 V).

The anode is the iron half (Fe²⁺ is oxidized). The notation is C(s) | Fe²⁺(aq), Fe³⁺(aq) || MnO₄⁻(aq), H⁺(aq), Mn²⁺(aq) | C(s). E°cell = 1.51 − 0.77 = +0.74 V.

Practice 5

Given these Data Booklet table rows: Cl₂ + 2e⁻ → 2Cl⁻ (+1.36 V) and Br₂ + 2e⁻ → 2Br⁻ (+1.07 V). Will Cl₂ oxidize Br⁻ to Br₂ under standard conditions? Write the equation and E°cell.

Cl₂ has the higher value, so it is reduced, and Br⁻ is oxidized. The reaction is Cl₂ + 2Br⁻ → 2Cl⁻ + Br₂. E°cell = 1.36 − 1.07 = +0.29 V, so it is spontaneous.

Practice 6

In the cell C(s) | Fe²⁺(aq), Fe³⁺(aq) || MnO₄⁻(aq), H⁺(aq), Mn²⁺(aq) | C(s), predict the change in pH and in colour near the cathode. Explain with a half-reaction.

The pH rises and the purple colour fades. At the cathode, MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O uses H⁺ and changes purple MnO₄⁻ to colourless Mn²⁺ at 0.010 mol/L.

Practice 7

Challenge: Given the Data Booklet table values E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. Suppose chemists had chosen the zinc half-cell as the zero reference instead of hydrogen. What would E°(Cu²⁺/Cu) be on that new scale, in volts? Would E°cell for the zinc and copper cell change? Explain.

Moving the zero shifts every value by the same amount. Zinc must become 0.00 V, so every value goes up by 0.76 V. New E°(Cu²⁺/Cu) = +0.34 + 0.76 = +1.10 V. E°cell on the hydrogen scale = +0.34 − (−0.76) = +1.10 V. On the new scale it is +1.10 − 0.00 = +1.10 V. It does not change. A cell voltage is a difference, so the choice of zero does not matter.

The PDF key follows the slides, with worked answers.