B6 · Voltaic cells · Completed notes
Download the printable PDF
Goals: Explain why a voltaic cell separates the half-reactions and needs a salt bridge. Identify the anode and cathode, and write cell notation and half-reactions. Predict observations and calculate the standard cell potential.
Slide 1 of 9 · Why separate the halves?
Key ideas
Zinc atoms give up electrons and Cu²⁺ ions take them, so zinc in copper(II) sulfate solution is a redox reaction.
When zinc touches the ions, electrons jump straight across the surface and the energy spreads out as heat.
To get useful work, keep the two halves apart and let the electrons travel only through a wire.
A cell that turns chemical energy into electrical energy is a voltaic cell (also called a galvanic cell). One electrode plus its solution is a half-cell.
Example
Zinc placed in copper(II) sulfate solution slowly becomes coated with copper, and the solution warms. How could we use that electron transfer to run a device? Sketch the cell.
- Put the zinc in its own Zn²⁺(aq) solution and the copper in its own Cu²⁺(aq) solution.
- Join the two metals with a wire, so the electrons must travel through it.
- A device or voltmeter in the wire uses the energy. This is a voltaic cell.
Try it
Zinc metal is placed directly in Cu²⁺(aq). What happens to the energy released? Name the energy change when the same reaction runs in a voltaic cell.
- The energy is released as heat, because the electrons jump straight from zinc to Cu²⁺.
- In a voltaic cell, chemical energy becomes electrical energy.
Slide 2 of 9 · Which electrode is which?
Key ideas
The ion with the higher table value is the stronger oxidizing agent, so it is reduced. The metal in the other row is oxidized.
The anode is where oxidation happens. The cathode is where reduction happens. Memory aid: AN OX (anode, oxidation) and RED CAT (reduction, cathode).
In a voltaic cell the anode is negative and the cathode is positive.
Electrons leave the anode, travel through the wire and are used up at the cathode. Ions carry the charge in the solutions.
Example
Given E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. A voltaic cell joins the two half-cells. Which metal is oxidized? Name the anode and cathode, give their signs, and say which way the electrons travel.
- Cu²⁺/Cu has the higher value (+0.34 V), so Cu²⁺ is reduced. Zinc is oxidized.
- Anode: zinc, negative. Zn → Zn²⁺ + 2e⁻
- Cathode: copper, positive. Cu²⁺ + 2e⁻ → Cu
- Electrons travel from the zinc electrode through the wire to the copper electrode.
Try it
Given E°(Mg²⁺/Mg) = −2.37 V and E°(Zn²⁺/Zn) = −0.76 V. A voltaic cell joins the two half-cells. Which metal is the anode, which electrode is positive, and which way do the electrons travel?
- Zn²⁺/Zn has the higher value (−0.76 V), so Zn²⁺ is reduced at the cathode. Magnesium is oxidized.
- Magnesium is the anode (negative). Zinc is the cathode (positive).
- Electrons travel from the magnesium electrode through the wire to the zinc electrode.
Slide 3 of 9 · The salt bridge keeps charge balanced
Key ideas
At the anode, Zn atoms make Zn²⁺ ions, so that beaker gains positive charge. At the cathode, Cu²⁺ ions leave, so extra negative ions (anions) remain.
The charge build-up pushes back on the electrons, and the voltmeter reading falls to zero.
A salt bridge holds unreactive ions, such as sodium nitrate. It joins the two solutions and carries ions but no electrons. A porous barrier does the same job.
Anions move toward the anode beaker, which gains positive charge. Cations move toward the cathode beaker, which loses positive charge.
Example
A Zn / Cu cell is joined with wires only. After a short time the voltmeter reading falls to zero. What stops the cell, and how does a salt bridge fix it?
- Zn²⁺ ions build up in the anode beaker. Cu²⁺ ions leave the cathode beaker, so extra negative ions remain there.
- The build-up of charge pushes back on the electrons, and they stop.
- A salt bridge lets ions move between the beakers: anions toward the anode and cations toward the cathode. The circuit is complete and the cell keeps running.
Try it
In the Zn / Cu cell, the salt bridge contains NaNO₃(aq). Toward which beaker do the Na⁺ ions move, and why?
- The Na⁺ ions move toward the copper (cathode) beaker.
- Cu²⁺ ions are leaving that beaker, so positive ions move in to balance the charge.
Slide 4 of 9 · Cell notation
Key ideas
In cell notation, the anode goes on the far left and the cathode goes on the far right.
Each half is written from the solid metal to its ion. A single line | separates two different phases.
The double line || stands for the salt bridge or porous barrier. Always include state symbols such as (s) and (aq).
To write the overall reaction, take the left half as oxidation and the right half as reduction. Match the electrons, add the halves and cancel them.
Example
In a Zn / Cu cell, zinc is the anode and copper is the cathode. Write the cell notation and the overall reaction.
- Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s)
- Oxidation: Zn → Zn²⁺ + 2e⁻
- Reduction: Cu²⁺ + 2e⁻ → Cu
- Both halves move 2 electrons, so they cancel. Overall: Zn + Cu²⁺ → Zn²⁺ + Cu
Try it
Given the cell notation Mg(s) | Mg²⁺(aq) || Ag⁺(aq) | Ag(s). Write the oxidation half-reaction, the reduction half-reaction and the overall reaction.
- Oxidation (left half): Mg → Mg²⁺ + 2e⁻
- Reduction (right half): Ag⁺ + e⁻ → Ag. Double it to take 2 electrons: 2Ag⁺ + 2e⁻ → 2Ag
- Overall: Mg + 2Ag⁺ → Mg²⁺ + 2Ag. Charge is +2 on each side.
Slide 5 of 9 · Your turn: copper and silver
Key ideas
Compare the table values first. Ag⁺/Ag is +0.80 V and Cu²⁺/Cu is +0.34 V, so silver ions are reduced at the cathode.
Each Ag⁺ takes 1 electron but the copper anode gives 2. Multiply the silver half by 2: 2Ag⁺ + 2e⁻ → 2Ag.
E° is never multiplied by a coefficient. The doubled silver half still has the value +0.80 V. Overall: Cu + 2Ag⁺ → Cu²⁺ + 2Ag.
Notation: Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s). Cell notation has no coefficients.
Example
Given Cu²⁺ + 2e⁻ → Cu (+0.34 V) and Ag⁺ + e⁻ → Ag (+0.80 V). A cell has a copper electrode in Cu²⁺(aq), a silver electrode in Ag⁺(aq), a wire and a salt bridge. Name the anode, write the half-reactions and overall reaction, and write the cell notation.
- Ag⁺/Ag has the higher value, so silver is the cathode. Copper is the anode.
- Oxidation: Cu → Cu²⁺ + 2e⁻
- Reduction: 2Ag⁺ + 2e⁻ → 2Ag
- Overall: Cu + 2Ag⁺ → Cu²⁺ + 2Ag
- Notation: Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s)
Try it
Given Al³⁺ + 3e⁻ → Al (−1.66 V) and Cu²⁺ + 2e⁻ → Cu (+0.34 V). A cell has an aluminium electrode in Al³⁺(aq), a copper electrode in Cu²⁺(aq) and a salt bridge. Name the anode, write the overall reaction and write the cell notation.
- Cu²⁺/Cu has the higher value, so copper is the cathode. Aluminium is the anode.
- Oxidation: Al → Al³⁺ + 3e⁻. Reduction: Cu²⁺ + 2e⁻ → Cu
- Multiply the oxidation by 2 and the reduction by 3 so each moves 6 electrons.
- Overall: 2Al + 3Cu²⁺ → 2Al³⁺ + 3Cu. Charge is +6 on each side.
- Notation: Al(s) | Al³⁺(aq) || Cu²⁺(aq) | Cu(s)
Slide 6 of 9 · Predict what you would observe
Key ideas
Every prediction comes from a half-reaction. Ask what is made and what is used up at each electrode.
At the copper anode, Cu → Cu²⁺ + 2e⁻, so the electrode loses mass and the Cu²⁺ concentration goes up. The Data Booklet lists Cu²⁺ as blue (p. 11), so the blue gets deeper.
At the silver cathode, 2Ag⁺ + 2e⁻ → 2Ag, so the electrode gains mass and the Ag⁺ concentration goes down.
Ag⁺ is colourless in water, so there is no colour change at the cathode. A metal anode loses mass and a metal cathode gains mass.
Example
The Cu / Ag cell Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s) is running. Predict what happens to each electrode and each solution as the cell operates.
- Anode (Cu): Cu → Cu²⁺ + 2e⁻. The copper electrode loses mass. Cu²⁺ increases and the blue colour deepens.
- Cathode (Ag): 2Ag⁺ + 2e⁻ → 2Ag. The silver electrode gains mass. Ag⁺ falls in concentration and the solution stays colourless.
Try it
The Zn / Cu cell Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s) is running. Predict the mass change of each electrode and the change in the blue colour of the copper solution.
- Anode (Zn): Zn → Zn²⁺ + 2e⁻. The zinc electrode loses mass.
- Cathode (Cu): Cu²⁺ + 2e⁻ → Cu. The copper electrode gains mass.
- Cu²⁺ is used up, so the blue colour of the copper solution fades.
Slide 7 of 9 · Cell potential
Key ideas
Standard conditions mean 1.0 mol/L solutions, 25.00 °C (298.15 K) and 101.325 kPa for gases.
E°cell = E°cathode − E°anode. Use each table value as printed, even for the anode.
For the Zn / Cu cell, E°cell = 0.34 − (−0.76) = +1.10 V. Subtracting a negative number adds.
A positive E°cell means the cell reaction runs as written. A negative value warns that the anode and cathode are swapped. Never multiply E° by a coefficient.
Example
Given E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. Zinc is the anode and copper is the cathode. Calculate E°cell. Then swap the electrodes and say what the sign tells you.
- E°cell = E°cathode − E°anode = +0.34 V − (−0.76 V) = +1.10 V
- Swapped: E°cell = −0.76 V − (+0.34 V) = −1.10 V
- The negative value means the cell does not run that way. The half with the higher value must be the cathode.
Try it
Given E°(Fe²⁺/Fe) = −0.45 V and E°(Ag⁺/Ag) = +0.80 V. Iron is the anode and silver is the cathode. Calculate E°cell and say whether the cell reaction runs as written.
- E°cell = E°cathode − E°anode = +0.80 V − (−0.45 V) = +1.25 V
- The value is positive, so the cell reaction runs as written.
Slide 8 of 9 · Method: how to describe a voltaic cell
Key ideas
Step 1. Write the two halves. Oxidation happens at the anode. Reduction happens at the cathode.
Step 2. Trace the electrons. They travel through the wire from the anode to the cathode.
Step 3. Place the salt bridge ions. Anions move toward the anode. Cations move toward the cathode.
Step 4. Write the cell notation, with the anode on the left and the cathode on the right.
Step 5. E°cell = E°cathode − E°anode.
Step 6. Predict what you would see. Check: E°cell is positive for a working cell.
Example
Use the method on a cell with Cu in Cu²⁺(aq) and Ag in Ag⁺(aq). E°(Cu²⁺/Cu) = +0.34 V and E°(Ag⁺/Ag) = +0.80 V. Describe the cell.
- Step 1: Cu → Cu²⁺ + 2e⁻ at the anode. 2Ag⁺ + 2e⁻ → 2Ag at the cathode.
- Steps 2 and 3: electrons go from Cu to Ag through the wire. Anions move toward Cu and cations toward Ag.
- Step 4: Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s).
- Steps 5 and 6: E°cell = +0.80 − (+0.34) = +0.46 V. Copper loses mass and the blue deepens. Silver gains mass.
Try it
Use the method on a cell with Zn in Zn²⁺(aq) and Cu in Cu²⁺(aq). E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. Find the anode, the notation and E°cell.
- Zn has the lower E°, so Zn is the anode and Cu is the cathode.
- Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s).
- E°cell = +0.34 − (−0.76) = +1.10 V.
Slide 9 of 9 · A cell drawn the other way
Key ideas
Where an electrode is drawn does not show which one is the anode. Use the table values.
E°(Ag⁺/Ag) = +0.80 V is higher than E°(Zn²⁺/Zn) = −0.76 V, so silver is the cathode and zinc is the anode.
If the anode is drawn on the right, the electrons travel through the wire from right to left.
In cell notation the anode is always on the far left. E°cell = E°cathode − E°anode = +1.56 V, and redrawing the cell does not change it.
Example
Given E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V. A drawing shows the silver half-cell on the left and the zinc half-cell on the right. Find the anode, write the cell notation and find E°cell.
- Ag⁺/Ag has the higher value (+0.80 V), so silver is the cathode. Zinc is the anode, even though it is drawn on the right.
- Notation puts the anode first: Zn(s) | Zn²⁺(aq) || Ag⁺(aq) | Ag(s)
- E°cell = E°cathode − E°anode = +0.80 V − (−0.76 V) = +1.56 V
Try it
Given E°(Cu²⁺/Cu) = +0.34 V and E°(Mg²⁺/Mg) = −2.37 V. A drawing shows the copper half-cell on the left and the magnesium half-cell on the right. Find the anode, write the cell notation and find E°cell.
- Cu²⁺/Cu has the higher value (+0.34 V), so copper is the cathode. Magnesium is the anode, drawn on the right.
- Notation: Mg(s) | Mg²⁺(aq) || Cu²⁺(aq) | Cu(s)
- E°cell = +0.34 V − (−2.37 V) = +2.71 V
Practice 1
Given the Data Booklet table values E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V. A cell has a zinc electrode in Zn²⁺(aq) and a silver electrode in Ag⁺(aq). Name the anode and the cathode, and state the direction of electron flow in the wire.
Use Method: how to describe a voltaic cell. Zinc is the anode (lower table value, oxidized). Silver is the cathode (higher value, reduced). Electrons go from the zinc electrode through the wire to the silver electrode.
Practice 2
Given a cell in which Mg(s) is oxidized and Cu²⁺(aq) is reduced, with a salt bridge. Write the cell notation.
Mg(s) | Mg²⁺(aq) || Cu²⁺(aq) | Cu(s). The anode is on the far left, the double line is the salt bridge, and the cathode is on the far right.
Practice 3
Given the Cu / Ag cell, Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s), with a salt bridge containing NaNO₃(aq). Toward which beaker do the NO₃⁻ ions move, and why?
NO₃⁻ ions move toward the copper (anode) beaker. Cu²⁺ ions are being made there, so positive charge builds up and the anions balance it.
Practice 4
Given the Cu / Ag cell, Cu(s) | Cu²⁺(aq) || Ag⁺(aq) | Ag(s), running. Predict the change in mass of each electrode and the change in the blue colour of the copper solution.
The copper electrode loses mass (Cu → Cu²⁺ + 2e⁻). The silver electrode gains mass (Ag⁺ + e⁻ → Ag). The Cu²⁺ solution gets a deeper blue because Cu²⁺ is produced.
Practice 5
A student builds the Zn / Cu cell with wires but no salt bridge or porous barrier. The voltmeter reading drops to zero after a moment. Explain why.
Zn²⁺ ions build up positive charge in the anode beaker, and the cathode beaker is left with extra negative charge. Without a bridge the ions cannot balance the charge, so the electrons stop flowing.
Practice 6
Given the Data Booklet table values E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V. Find E°cell for the cell with zinc as the anode and silver as the cathode.
E°cell = E°cathode − E°anode = 0.80 − (−0.76) = +1.56 V.
Practice 7
Challenge: Given the Data Booklet table values E°(Al³⁺/Al) = −1.66 V and E°(Ni²⁺/Ni) = −0.26 V. Both values are negative. A voltaic cell is built from these two half-cells. Name the anode, write the cell notation and the net equation, and find E°cell in volts.
The lower table value is the reducing agent. Aluminium (−1.66 V) is lower, so Al is oxidized and is the anode. Nickel is the cathode. Notation: Al(s) | Al³⁺(aq) || Ni²⁺(aq) | Ni(s). Halves: Al → Al³⁺ + 3e⁻ and Ni²⁺ + 2e⁻ → Ni. Match 6 electrons: 2Al(s) + 3Ni²⁺(aq) → 2Al³⁺(aq) + 3Ni(s). E°cell = E°cathode − E°anode = −0.26 − (−1.66) = +1.40 V. Two negative table values can still give a positive cell voltage.
The PDF key follows the slides, with worked answers.