B16 · Unit B review: choose the method · Completed notes

Download the printable PDF

Goals: Choose the method a Unit B question needs. Use the table, Faraday’s law and a titration in turn. Explain corrosion protection, plating and bleaching with redox ideas.

Slide 1 of 8 · Sort the problem before you solve it

Key ideas

Choose the method before you touch a calculator. If the question asks about voltage, spontaneity or the anode, use the E° table. If it gives current and time, or asks for a mass at an electrode, use Faraday’s law.

If it asks for a concentration from the volume of a reactant, use a redox titration. What is given and the unknown point you to the method.

A positive E°reaction means the reaction runs by itself, so it can be a voltaic cell. A negative E°reaction needs a power supply, so it is run as an electrolytic cell.

In both cell types, oxidation happens at the anode and reduction happens at the cathode. Electrode names follow the reaction, not the cell type.

Example

Each Unit B problem asks about a cell, a charge or a titration. Choose the method for each. (a) Find the voltage of a zinc and silver cell. (b) Find the mass of silver from 3.00 A for 25.0 min. (c) Find [Fe²⁺] from the volume of MnO₄⁻ solution needed.

  1. (a) Voltage: use the E° table.
  2. (b) Current and time, and a mass at an electrode: use Faraday’s law.
  3. (c) A concentration from a volume of reactant: use a redox titration.

Try it

Choose the method for each. (a) Find the mass of copper from 2.00 A for 10.0 min. (b) Find [Fe²⁺] from a permanganate titration. Then, for E°reaction = −0.50 V, name the cell type and the cathode reaction.

  1. (a) Current and time, and a mass: use Faraday’s law.
  2. (b) A concentration from a volume of reactant: use a redox titration.
  3. E°reaction is negative, so the reaction needs a power supply and runs in an electrolytic cell. Reduction still happens at the cathode.

Slide 2 of 8 · Combine half-reactions

Key ideas

Aluminium has the lower E° (−1.66 V), so it is the anode and is oxidized: Al → Al³⁺ + 3e⁻. Silver is the cathode: Ag⁺ + e⁻ → Ag.

Each silver ion takes only 1 electron, so triple the silver half. Add the halves: Al + 3Ag⁺ → Al³⁺ + 3Ag.

Check the balance. Al 1, Ag 3 and charge +3 on each side. A balanced equation must match in atoms and in charge.

E°reaction = E°cathode − E°anode = 0.80 − (−1.66) = +2.46 V. Do not multiply the silver value by three. A positive value means the reaction is spontaneous.

Example

Find the cell reaction and voltage for aluminium and silver half-cells at 1.0 mol/L. Given E°(Al³⁺/Al) = −1.66 V and E°(Ag⁺/Ag) = +0.80 V.

  1. Aluminium has the lower E°, so aluminium is the anode: Al → Al³⁺ + 3e⁻
  2. Silver is the cathode. Triple it to match 3e⁻: 3Ag⁺ + 3e⁻ → 3Ag
  3. Add: Al + 3Ag⁺ → Al³⁺ + 3Ag
  4. Check: Al 1, Ag 3, charge +3 on each side.
  5. E°reaction = 0.80 − (−1.66) = +2.46 V, which is positive, so it is spontaneous.

Try it

Find the cell reaction and voltage for aluminium and copper half-cells at 1.0 mol/L. Given E°(Al³⁺/Al) = −1.66 V and E°(Cu²⁺/Cu) = +0.34 V.

  1. Aluminium has the lower E°, so aluminium is the anode: Al → Al³⁺ + 3e⁻
  2. Copper is the cathode: Cu²⁺ + 2e⁻ → Cu
  3. Make 6e⁻ in each half: 2Al → 2Al³⁺ + 6e⁻ and 3Cu²⁺ + 6e⁻ → 3Cu
  4. Add: 2Al + 3Cu²⁺ → 2Al³⁺ + 3Cu. Check: Al 2, Cu 3, charge +6 on each side.
  5. E°reaction = 0.34 − (−1.66) = +2.00 V, which is positive, so it is spontaneous.

Slide 3 of 8 · From current and time to a mass

Key ideas

Current is charge per second. Change minutes to seconds first. The charge is q = It, where I is the current in amperes and t is the time in seconds.

Divide the charge by Faraday’s constant, 9.65 × 10⁴ C/mol e⁻, to get the moles of electrons. Here 4500 ÷ (9.65 × 10⁴) = 0.04663 mol.

The mole ratio comes from the half-reaction. Ag⁺ + e⁻ → Ag needs 1 mol of electrons per mole of metal, Cu²⁺ + 2e⁻ → Cu needs 2, and Al³⁺ + 3e⁻ → Al needs 3.

Mass = moles × molar mass. For silver, 0.04663 mol × 107.87 g/mol = 5.03 g. A wrong mole ratio makes the mass wrong by that same factor.

Example

A current of 3.00 A runs for 25.0 min in a cell with a silver cathode in Ag⁺ solution. Find the mass of silver deposited. Use F = 9.65 × 10⁴ C/mol e⁻ and M(Ag) = 107.87 g/mol.

  1. t = 25.0 min × 60 = 1500 s
  2. q = It = 3.00 A × 1500 s = 4500 C
  3. n(e⁻) = 4500 C ÷ (9.65 × 10⁴) = 0.04663 mol
  4. Ag⁺ + e⁻ → Ag is 1 to 1, so n(Ag) = 0.04663 mol.
  5. m = 0.04663 mol × 107.87 g/mol = 5.03 g

Try it

A current of 2.50 A runs for 18.0 min in a cell with a copper cathode in Cu²⁺ solution. Find the mass of copper deposited. Use F = 9.65 × 10⁴ C/mol e⁻ and M(Cu) = 63.55 g/mol.

  1. t = 18.0 min × 60 = 1080 s
  2. q = It = 2.50 A × 1080 s = 2700 C
  3. n(e⁻) = 2700 C ÷ (9.65 × 10⁴) = 0.02798 mol
  4. Cu²⁺ + 2e⁻ → Cu needs 2 mol e⁻ per mol Cu, so n(Cu) = 0.02798 ÷ 2 = 0.01399 mol.
  5. m = 0.01399 mol × 63.55 g/mol = 0.889 g

Slide 4 of 8 · Redox titration

Key ideas

A redox titration finds a concentration by reacting a sample with a solution of known concentration. Permanganate is reduced: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O.

Iron(II) is oxidized: Fe²⁺ → Fe³⁺ + e⁻. Five iron(II) ions supply the five electrons that one permanganate needs, so the mole ratio is 1 MnO₄⁻ to 5 Fe²⁺.

Change volumes to litres first: divide millilitres by 1000. So 20.00 mL is 0.02000 L and 25.00 mL is 0.02500 L. Then amount = concentration × volume.

The end point is the first lasting pale pink. It shows all the iron(II) has reacted. The mole ratio comes from the coefficients of the balanced equation, not from 1 to 1.

Example

A 25.00 mL sample of iron(II) solution needs 20.00 mL of 0.0200 mol/L MnO₄⁻ solution in acid. Find [Fe²⁺]. Given MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O and Fe²⁺ → Fe³⁺ + e⁻.

  1. Five Fe²⁺ supply 5e⁻: MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺
  2. Check: Mn 1, O 4, H 8, Fe 5, charge +17 on each side.
  3. n(MnO₄⁻) = 0.02000 L × 0.0200 mol/L = 4.00 × 10⁻⁴ mol
  4. n(Fe²⁺) = 5 × 4.00 × 10⁻⁴ mol = 2.00 × 10⁻³ mol
  5. [Fe²⁺] = 2.00 × 10⁻³ mol ÷ 0.02500 L = 0.0800 mol/L

Try it

A 20.00 mL sample of iron(II) solution needs 30.00 mL of 0.0100 mol/L MnO₄⁻ solution in acid. Find [Fe²⁺]. Use MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺.

  1. n(MnO₄⁻) = 0.03000 L × 0.0100 mol/L = 3.00 × 10⁻⁴ mol
  2. n(Fe²⁺) = 5 × 3.00 × 10⁻⁴ mol = 1.50 × 10⁻³ mol
  3. [Fe²⁺] = 1.50 × 10⁻³ mol ÷ 0.02000 L = 0.0750 mol/L

Slide 5 of 8 · Method: how to choose the method

Key ideas

Step 1. Read what is given and what is asked. Do this before you touch a calculator.

Step 2. Sort the problem. A voltage or direction uses the table. Current and time use Faraday. A reacting volume uses a titration.

Step 3. Run that method’s steps. Use the matching method slide from this unit.

Step 4. Check the units and the digits. Round once, at the end.

Example

Use the method on a 25.00 mL sample of iron(II) solution that needs 20.00 mL of 0.0200 mol/L MnO₄⁻ in acid. Find [Fe²⁺].

  1. Step 1: given are two volumes and one concentration. Asked is a concentration.
  2. Step 2: a reacting volume points to the titration method.
  3. Step 3: n(MnO₄⁻) = 0.02000 × 0.0200 = 4.00 × 10⁻⁴ mol. n(Fe²⁺) = 5 × 4.00 × 10⁻⁴ = 2.00 × 10⁻³ mol. [Fe²⁺] = 2.00 × 10⁻³ ÷ 0.02500 = 0.0800 mol/L.
  4. Step 4: the unit is mol/L and the answer has three digits.

Try it

Use the method on 3.00 A for 10.0 minutes through Ag⁺(aq) with a silver cathode. M(Ag) = 107.87 g/mol. Choose the method and find the mass of silver.

  1. Current and time are given, so use Faraday’s law.
  2. q = 3.00 × 600 = 1800 C. n(e⁻) = 1800 ÷ (9.65 × 10⁴) = 0.018653 mol. n(Ag) = 0.018653 mol.
  3. m = 0.018653 × 107.87 = 2.0121 g, which rounds to 2.01 g.

Slide 6 of 8 · Your turn: choose, then solve

Key ideas

Name the method first. Cell A gives table values and asks for a voltage, so use the E° table. Cell B gives current and time and asks for a mass, so use Faraday’s law.

For cell A, zinc has the lower E° (−0.76 V), so zinc is the anode. Zinc gives 2 electrons and each silver ion takes 1, so double the silver half.

Zn + 2Ag⁺ → Zn²⁺ + 2Ag. E°cell = 0.80 − (−0.76) = +1.56 V. This is positive, so the cell is voltaic. Do not double the silver value.

For cell B, 30.0 min × 60 = 1800 s. Sodium ions are reduced at the cathode: Na⁺ + e⁻ → Na, a ratio of 1 to 1. Write the unit with each answer.

Example

Cell A is a zinc and silver cell: E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V. Cell B is molten NaCl with 2.00 A for 30.0 min. Choose the method for each. Find E°cell for cell A and the mass of sodium for cell B. Use F = 9.65 × 10⁴ C/mol e⁻ and M(Na) = 22.99 g/mol.

  1. Cell A asks for a voltage: use the E° table. Cell B gives current and time: use Faraday’s law.
  2. Cell A: zinc is the anode. Zn → Zn²⁺ + 2e⁻ and 2Ag⁺ + 2e⁻ → 2Ag
  3. Zn + 2Ag⁺ → Zn²⁺ + 2Ag. E°cell = 0.80 − (−0.76) = +1.56 V, so it is voltaic.
  4. Cell B: t = 30.0 min × 60 = 1800 s. q = 2.00 A × 1800 s = 3600 C
  5. n(e⁻) = 3600 C ÷ (9.65 × 10⁴) = 0.03731 mol
  6. Na⁺ + e⁻ → Na is 1 to 1, so m = 0.03731 mol × 22.99 g/mol = 0.858 g

Try it

Cell C is an iron and silver cell: E°(Fe²⁺/Fe) = −0.45 V and E°(Ag⁺/Ag) = +0.80 V. Cell D is molten NaCl with 2.50 A for 20.0 min. Choose the method for each. Find E°cell for cell C and the mass of sodium for cell D. Use M(Na) = 22.99 g/mol.

  1. Cell C asks for a voltage: use the E° table. Cell D gives current and time: use Faraday’s law.
  2. Cell C: iron is the anode. Fe + 2Ag⁺ → Fe²⁺ + 2Ag
  3. E°cell = 0.80 − (−0.45) = +1.25 V, so it is voltaic.
  4. Cell D: t = 20.0 min × 60 = 1200 s. q = 2.50 A × 1200 s = 3000 C
  5. n(e⁻) = 3000 C ÷ (9.65 × 10⁴) = 0.03109 mol
  6. Na⁺ + e⁻ → Na is 1 to 1, so m = 0.03109 mol × 22.99 g/mol = 0.715 g

Slide 7 of 8 · Corrosion, industry and batteries

Key ideas

Iron rusts because it is oxidized: Fe → Fe²⁺ + 2e⁻. A metal with a lower reduction value, like magnesium (−2.37 V), is a stronger reducing agent than iron (−0.45 V).

Join magnesium to iron. The magnesium is the anode and is used up, so it is a sacrificial anode. The iron is protected as the cathode.

In electroplating, the object to plate is the cathode. In refining, the impure metal is the anode, so it dissolves, and pure metal collects at the cathode.

Every process follows one rule: oxidation at the anode and reduction at the cathode. A good battery balances voltage, mass, cost, lifetime and disposal.

Example

A steel pipe in soil must be protected from rust. Given E°(Mg²⁺/Mg) = −2.37 V and E°(Fe²⁺/Fe) = −0.45 V, explain how a magnesium block protects the pipe. Name which metal is oxidized and which is the cathode.

  1. Magnesium has the lower value (−2.37 V), so it is the stronger reducing agent and is oxidized first.
  2. Mg + Fe²⁺ → Mg²⁺ + Fe has E°reaction = −0.45 − (−2.37) = +1.92 V, which is positive.
  3. The magnesium is the sacrificial anode and is used up. The iron pipe is the cathode and is not oxidized.

Try it

Impure copper is refined by electrolysis. Name the electrode that is the impure copper. Write the half-reaction at each electrode.

  1. The impure copper is the anode, because oxidation happens there: Cu → Cu²⁺ + 2e⁻
  2. Pure copper collects at the cathode, because reduction happens there: Cu²⁺ + 2e⁻ → Cu

Slide 8 of 8 · Redox in industry: bleaching and preserving

Key ideas

Industry bleaches with an oxidizing agent. Pulp and paper mills use chlorine dioxide or hydrogen peroxide. Textile makers use hydrogen peroxide or hypochlorite.

The oxidizing agent oxidizes the coloured compounds, so they become colourless.

A vat dye such as indigo is treated with a reducing agent so that it dissolves. Oxygen in the air then oxidizes it back to its colour.

Oxygen is an oxidizing agent. It browns cut fruit and makes fats rancid. An antioxidant such as vitamin C is a reducing agent. It reacts with the oxygen first, so the food is protected.

Example

A pulp mill bleaches brown wood pulp with hydrogen peroxide. Name the oxidizing agent. Say what it changed and what was oxidized.

  1. Hydrogen peroxide is the oxidizing agent. It takes electrons, so it is reduced.
  2. The coloured compounds in the pulp lose electrons, so they are oxidized.
  3. The oxidized compounds are colourless, so the pulp turns white.

Try it

Vitamin C is added to cut apple slices so they do not turn brown. Is vitamin C an oxidizing agent or a reducing agent? Explain how it protects the apple.

  1. Vitamin C is a reducing agent. It gives electrons, so it is oxidized.
  2. Oxygen is the oxidizing agent that browns the apple.
  3. Vitamin C reacts with the oxygen first, so the apple is not oxidized.

Practice 1

Given the Data Booklet table values E°(Cu²⁺/Cu) = +0.34 V and E°(Mg²⁺/Mg) = −2.37 V, at 1.0 mol/L. Choose the method. Name the anode and find the voltage.

Use Method: how to choose the method. Use the E° table. Magnesium is the anode. E°cell = 0.34 − (−2.37) = +2.71 V.

Practice 2

A current of 4.00 A runs for 20.0 min through Cu²⁺(aq) with a copper cathode. Find the mass of copper that forms. Use M(Cu) = 63.55 g/mol.

q = 4.00 × 1200 = 4800 C. n(e⁻) = 4800 ÷ (9.65 × 10⁴) = 0.04974 mol. n(Cu) = 0.02487 mol. m = 1.58 g.

Practice 3

In acid, 20.00 mL of 0.0150 mol/L MnO₄⁻ reacts with 25.00 mL of an iron(II) solution. Find [Fe²⁺]. Use MnO₄⁻ + 8H⁺ + 5Fe²⁺ → Mn²⁺ + 4H₂O + 5Fe³⁺.

n(MnO₄⁻) = 0.02000 × 0.0150 = 3.00 × 10⁻⁴ mol. n(Fe²⁺) = 1.50 × 10⁻³ mol. [Fe²⁺] = 1.50 × 10⁻³ ÷ 0.02500 = 0.0600 mol/L.

Practice 4

A reaction has a calculated E°reaction of −0.50 V. What kind of cell can make it happen, and what does the cell need?

An electrolytic cell. The reaction is not spontaneous, so a power supply must push it with more than 0.50 V.

Practice 5

A steel pipe in soil must be protected from rust. Name one method. Say why it works, and say which electrode the pipe is.

Attach a magnesium block. Magnesium has a lower table value than iron, so magnesium is oxidized in place of the iron. The pipe is the cathode.

Practice 6

A spoon is to be plated with silver from a silver nitrate solution. Which electrode is the spoon? Write the half-reaction there. Which terminal of the power supply is it joined to?

The spoon is the cathode. Ag⁺ + e⁻ → Ag. Join the spoon to the negative terminal of the power supply.

Practice 7

A mill bleaches wood pulp with hydrogen peroxide. What kind of agent is hydrogen peroxide here? What does it do to the coloured compounds?

Hydrogen peroxide is the oxidizing agent. It oxidizes the coloured compounds to colourless ones, so the pulp turns white.

Practice 8

Challenge: Given a zinc and copper voltaic cell that delivers 0.300 A for 2.00 hours. Data Booklet values: E°(Zn²⁺/Zn) = −0.76 V, E°(Cu²⁺/Cu) = +0.34 V and M(Zn) = 65.41 g/mol. This question needs two methods. Find E°cell in volts. Then find the mass of zinc that the anode loses, in grams. Use F = 9.65 × 10⁴ C/mol e⁻.

Voltage needs the E° table. Zinc has the lower value, so it is the anode: E°cell = +0.34 − (−0.76) = +1.10 V. Mass needs Faraday’s law. Time: t = 2.00 h × 3600 s/h = 7200 s. Charge: q = It = 0.300 × 7200 = 2160 C. Moles of electrons: n(e⁻) = 2160 ÷ (9.65 × 10⁴) = 0.022383 mol. Anode half-reaction: Zn → Zn²⁺ + 2e⁻, so n(Zn) = 0.022383 ÷ 2 = 0.011192 mol. Mass: m = 0.011192 mol × 65.41 g/mol = 0.732 g. The voltage does not enter the mass calculation.

The PDF key follows the slides, with worked answers.