B14 · Investigation: plan and predict · Notes

Download the printable PDF

Goals: Write a testable question with the independent, dependent and controlled variables. Draw a labelled cell design and predict the anode, the equation and the voltage from the table. Plan safe handling and disposal and plan a battery with cells in a row.

Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.

Slide 1 of 8 · A testable question and its variables

Key ideas

A testable question links one thing we to one thing we . Here we change the metal in one half-cell and measure the cell voltage.

The independent variable is the one we : the metal. The dependent variable is the one we measure: the .

Controlled variables stay the for a fair test. The table values are for 1.0 mol/L solutions, so we control the .

We also control the temperature, the electrode and the salt bridge. If two things changed, we could not tell which one caused the voltage change.

Example

We want to test the reduction table with real cells. Each metal is joined to a copper half-cell in copper(II) sulfate. Write a testable question. Name the independent variable, the dependent variable and two controlled variables.

Try it

A student asks whether the concentration of the copper(II) sulfate solution changes the voltage of a zinc and copper cell. Name the independent variable, the dependent variable and two controlled variables.

Slide 2 of 8 · A design with a labelled diagram

Key ideas

Half-cell 1 is a strip of metal X in a 1.0 mol/L solution of its . Half-cell 2 is a copper strip in 1.0 mol/L .

A salt bridge joins the solutions. It lets move so that charge stays balanced and the circuit is complete. Wires join the strips through a .

Predict first, then label. The half-cell with the reduction value is the anode, because that metal is oxidized. The value is the cathode.

Electrons flow in the wire from the to the . A good diagram also labels the solutions with their concentrations.

Example

We will join each metal half-cell to a copper half-cell. Draw the design for metal X in X²⁺(aq) joined to copper in Cu²⁺(aq). Label the parts. Assume X has the lower reduction value, and show the direction of electron flow.

Try it

Draw a design to test a silver half-cell against a copper half-cell, both 1.0 mol/L. Given E°(Cu²⁺/Cu) = +0.34 V and E°(Ag⁺/Ag) = +0.80 V, label the anode, the cathode and the electron flow.

Slide 3 of 8 · Predict before measuring

Key ideas

To predict, compare the two table values. The metal with the value is the anode and is oxidized. The metal with the higher value is the .

For zinc and copper, E°(Zn²⁺/Zn) = −0.76 V and E°(Cu²⁺/Cu) = +0.34 V. The cell reaction is Zn + Cu²⁺ → . Charge is +2 on each side.

The voltage is E°cell = E°cathode − E°anode = 0.34 − (−0.76) = . A flipped sign would give a cell voltage, which is wrong.

Copper is not always the cathode. Silver (+0.80 V) is higher than copper, so silver is the and copper is the . Compare the two values .

Example

Predict the anode and E°cell when each metal is joined to a 1.0 mol/L copper half-cell. Given E°(Zn²⁺/Zn) = −0.76 V, E°(Fe²⁺/Fe) = −0.45 V, E°(Ni²⁺/Ni) = −0.26 V, E°(Ag⁺/Ag) = +0.80 V and E°(Cu²⁺/Cu) = +0.34 V, do zinc, iron, nickel and silver.

Try it

Given E°(Fe²⁺/Fe) = −0.45 V and E°(Ag⁺/Ag) = +0.80 V. An iron half-cell is joined to a silver half-cell, both 1.0 mol/L. Predict the anode, the cathode and E°cell.

Slide 4 of 8 · Safe handling, labels and disposal

Key ideas

Read the label and the first. They tell the hazards and the first aid. They come from , the Workplace Hazardous Materials Information System.

Plan protection: , gloves and an apron. Silver nitrate stains . Copper(II) compounds harm life in water.

Store solutions in containers, so nobody mixes them up or spills them.

Collect solutions with metal ions in a . Do not pour them down the , because metal ions can harm water life. Follow the school disposal plan.

Example

A plan uses copper(II) sulfate and silver nitrate solutions. Name one hazard of each with a matching precaution. Then say how to handle the waste.

Try it

A plan uses nickel(II) sulfate solution and nickel strips. Name one hazard and a matching precaution, one storage step and one disposal step. Which item can be reused?

Slide 5 of 8 · Method: how to plan and predict an investigation

Key ideas

Step 1. Write a question. It links one thing you change to one thing you measure.

Step 2. Name the variables. : what you change. : what you measure. Controlled: what stays the same.

Step 3. Draw a labelled . Show the solutions with concentrations, the salt bridge, the wires and the meter.

Step 4. with the table. Find the anode, the cell reaction and E°cell before you measure.

Step 5. List and disposal. Name a hazard, a precaution and how the waste is collected.

Example

Use the method on testing the reduction table by joining each metal to a copper half-cell. Plan the investigation and predict the result for zinc.

Try it

Use the method on joining a nickel half-cell to a silver half-cell, both 1.0 mol/L. E°(Ni²⁺/Ni) = −0.26 V and E°(Ag⁺/Ag) = +0.80 V. Predict the anode and the voltage, and name one hazard.

Slide 6 of 8 · Your turn: nickel and silver

Key ideas

Compare the two table values. The value belongs to the metal that is oxidized, so that metal is the . Nickel (−0.26 V) is lower than silver (+0.80 V).

Balance the electrons first. Ni → Ni²⁺ + 2e⁻ gives 2 electrons, and each Ag⁺ takes , so double the silver half: 2Ag⁺ + 2e⁻ → .

Add the halves: Ni + 2Ag⁺ → Ni²⁺ + 2Ag. Check that the charge is on each side. Do not E° by the coefficient.

E°cell = 0.80 − (−0.26) = . Give the voltage with its sign and its . Silver nitrate stains skin, so wear .

Example

Given a plan to join a nickel half-cell, E°(Ni²⁺/Ni) = −0.26 V, to a silver half-cell, E°(Ag⁺/Ag) = +0.80 V, both 1.0 mol/L. Predict the anode, the cell reaction and the voltage. Name one hazard.

Try it

Given a plan to join a zinc half-cell, E°(Zn²⁺/Zn) = −0.76 V, to a silver half-cell, E°(Ag⁺/Ag) = +0.80 V, both 1.0 mol/L. Predict the anode, the cell reaction and the voltage. Name one disposal step.

Slide 7 of 8 · Plan a battery

Key ideas

Cells in a row their voltages. One zinc and copper cell gives , and the device needs at least 3.0 V.

Divide: 3.0 ÷ 1.10 = 2.73. You cannot use part of a cell, so to three cells. Two cells give only 2.20 V, which is not enough.

Three cells give 3 × 1.10 = , which is more than 3.0 V. The table gives the voltage at the start only. As reactants are used up, the voltage .

So the plan needs a : record the voltage over time while the device runs. A salt bridge adds , and magnesium gives more voltage but reacts with water.

Example

A small device needs at least 3.0 V. One zinc and copper cell gives E°cell = +1.10 V. How many cells in a row are needed? What must the plan check?

Try it

A device needs at least 4.0 V. One nickel and copper cell gives E°cell = +0.60 V. How many cells in a row are needed? Why might the real battery give less voltage than the table predicts?

Slide 8 of 8 · What a plan cannot show

Key ideas

A prediction uses the and tells what we expect. An observation comes from a and tells what really happens.

A plan only describes how we will get the measurement. A plan is a prediction nor an observation, and it is not .

A prediction becomes a test of an idea only when we it with an observation. A common wrong choice treats a predicted value as an .

Table values apply only at standard conditions: 1.0 mol/L solutions, and 101.325 kPa for gases. Real cells differ a little, so measurements differ a from predictions.

Example

A report lists 1.10 V for a zinc and copper cell under the heading Measured voltage. The value came from the reduction table. Is it an observation or a prediction? How can you tell? Why might a real measurement differ?

Try it

A given sample data set lists an iron and copper cell with a table value of 0.79 V and a voltmeter reading of 0.76 V. These readings were not measured by us. Which number is the prediction and which is the observation? Is the plan itself either one?

Practice 1

Given the question "How does the metal in one half-cell change the cell voltage?" Name the independent variable, the dependent variable and two controlled variables.

Practice 2

Given a plan to join a zinc half-cell to a copper half-cell with a salt bridge and a voltmeter. List the parts that a labelled diagram must show.

Practice 3

Given the table values E°(Fe²⁺/Fe) = −0.45 V and E°(Cu²⁺/Cu) = +0.34 V. Predict the anode, the cell reaction and the voltage.

Practice 4

Given a plan that uses silver nitrate solution. Name two hazards or precautions and one disposal step.

Practice 5

Given a nickel half-cell and a copper half-cell, both 1.0 mol/L. Predict the anode and the voltage (Data Booklet table values: E°(Ni²⁺/Ni) = −0.26 V; E°(Cu²⁺/Cu) = +0.34 V).

Practice 6

Given a device that needs at least 4.0 V and a cell of 1.10 V. Find the number of cells in a row, and give one thing that the plan should test.

Practice 7

Challenge: Given a device that needs at least 6.0 V. Two cell designs are possible. Data Booklet table values: E°(Zn²⁺/Zn) = −0.76 V, E°(Mg²⁺/Mg) = −2.37 V and E°(Cu²⁺/Cu) = +0.34 V. Design 1 joins zinc and copper half-cells. Design 2 joins magnesium and copper half-cells. Predict the voltage of one cell of each design. Then find the number of cells in a row that each design needs.