B11 · Faraday's law with the unknown chosen · Notes

Download the printable PDF

Goals: Choose the starting point of the Faraday chain from the givens and the question. Find a current, a time, an ion charge or a mass in an electrolysis. Use Faraday’s law in a voltaic cell and use the mass gained at a cathode.

Type in the blanks. Your notes save on this device only. Use the backup buttons at the bottom to keep a copy. Nothing is submitted.

Slide 1 of 8 · One chain, any unknown

Key ideas

Every Faraday problem uses the same chain: current and time, charge, moles of , moles of metal, and .

Step one: write the and the question. Step two: start at a given quantity and walk toward the .

Starting with current and time means going forward: multiply for charge, by F, then divide by the electron coefficient.

Starting with a mass means going backward: by the electron coefficient, then multiply by to get charge.

Example

A problem gives the mass of silver deposited and the time, and asks for the current. Which quantity do you start with, which direction do you walk, and what do you do at each step?

Try it

A problem gives the current and the time and asks for the mass of copper deposited. Which direction do you walk, and what do you do at each step?

Slide 2 of 8 · Finding the current

Key ideas

The question gives a mass and a time and asks for the current. Start with the mass and go : n(Cu) = m ÷ M.

In Cu²⁺ + 2e⁻ → Cu, multiply the moles of copper by to get moles of electrons. Then multiply by to get the charge.

Current is charge divided by time: I = . The time must be in .

Leaving the time in minutes makes the current too big.

Example

A copper cathode gains 1.25 g in 40.0 minutes from Cu²⁺ solution. What constant current was used? M(Cu) = 63.55 g/mol.

Try it

A zinc cathode gains 0.450 g in 30.0 minutes from Zn²⁺ solution. What constant current was used? M(Zn) = 65.41 g/mol.

Slide 3 of 8 · Finding the ion charge

Key ideas

When the half-reaction is unknown, let be the number of electrons each ion gains. It is also the on the ion.

Find the charge first: q = It. Then the moles of electrons are n(e⁻) = .

Find the moles of metal from its mass: n(metal) = .

Then z = n(e⁻) ÷ n(metal). Round z to the nearest . If z = 2.00, the ion has a charge of .

Example

A metal with a molar mass of 63.55 g/mol is plated from a solution of its ions by 2.00 A for 20.0 minutes. The mass deposited is 0.790 g. What is the charge on the ion?

Try it

A metal with a molar mass of 58.69 g/mol is plated from a solution of its ions by 1.00 A for 40.0 minutes. The mass deposited is 0.730 g. What is the charge on the ion?

Slide 4 of 8 · The chain in a voltaic cell

Key ideas

In a voltaic cell the electrons in the wire come from the half-reaction and are used in the half-reaction.

The charge that flows is q = It, so n(e⁻) = . These same electrons pass through both electrodes.

At the anode, Zn → Zn²⁺ + , so n(Zn) = n(e⁻) ÷ 2. The zinc anode mass.

At the cathode, Cu²⁺ + 2e⁻ → Cu, so the copper cathode mass. The moles are equal, but the masses differ because the differ.

Example

A zinc and copper voltaic cell gives a steady 0.500 A for 30.0 minutes. What mass of zinc dissolves from the anode, and what mass of copper deposits on the cathode? M(Zn) = 65.41 g/mol and M(Cu) = 63.55 g/mol.

Try it

A zinc and copper voltaic cell gives a steady 0.250 A for 2.00 hours. What mass of zinc dissolves from the anode, and what mass of copper deposits on the cathode? M(Zn) = 65.41 g/mol and M(Cu) = 63.55 g/mol.

Slide 5 of 8 · Your turn: gases from an aqueous solution

Key ideas

The same current supplies electrons at electrodes, so one value of n(e⁻) feeds both half-reactions.

Cathode: 2H₂O + 2e⁻ → H₂ + 2OH⁻. One H₂ needs electrons, so n(H₂) = n(e⁻) ÷ 2.

Anode: 2H₂O → O₂ + 4H⁺ + 4e⁻. One O₂ releases electrons, so n(O₂) = n(e⁻) ÷ .

Check: n(H₂) is n(O₂), which matches 2H₂O → 2H₂ + O₂. Read whether the question asks for or grams.

Example

Na₂SO₄(aq) is electrolyzed with inert electrodes using 2.00 A for 30.0 minutes. The half-reactions are 2H₂O + 2e⁻ → H₂ + 2OH⁻ and 2H₂O → O₂ + 4H⁺ + 4e⁻. Find the moles of hydrogen and oxygen formed.

Try it

Na₂SO₄(aq) is electrolyzed with inert electrodes using 1.60 A for 30.0 minutes. Find the moles of hydrogen and oxygen formed.

Slide 6 of 8 · Mass gained, then time

Key ideas

When an electrode is weighed twice, subtract: mass gained = . Do not use the alone.

Then n(Cu) = m ÷ M with M = . Because Cu²⁺ + 2e⁻ → Cu, n(e⁻) = × n(Cu).

The charge is q = n(e⁻) × . The time is t = q ÷ , where I is the current in amperes.

Give the time in the unit the question asks for. Divide seconds by to get minutes.

Example

A cathode has a mass of 14.200 g before copper plating and 14.850 g after. The current was 1.50 A. How long did the plating run, in minutes? M(Cu) = 63.55 g/mol.

Try it

A cathode has a mass of 25.300 g before silver plating and 26.085 g after. The current was 0.900 A. How long did the plating run, in minutes? The half-reaction is Ag⁺ + e⁻ → Ag. M(Ag) = 107.87 g/mol.

Slide 7 of 8 · Method: how to solve a Faraday problem when the unknown changes

Key ideas

Step 1. Write the : I and t, then q, then n(e⁻), then n(substance), then m.

Step 2. Mark the piece and the unknown piece.

Step 3. Move from the given toward the unknown. each step when you go backward.

Step 4. . Carry an extra digit in the middle lines.

Step 5. Run the chain with your answer and compare to the given.

Example

Use the method on a cathode that has a mass of 14.200 g before copper plating and 14.850 g after. The current was 1.50 A. Find the time.

Try it

Use the method on a cathode that gains 0.850 g of silver in 15.0 minutes from Ag⁺ + e⁻ → Ag. M(Ag) = 107.87 g/mol. Find the current.

Slide 8 of 8 · Mass at the anode

Key ideas

In copper refining, the impure copper is the . It dissolves: Cu → Cu²⁺ + .

The same electrons leave the anode and arrive at the , so the Faraday chain works at both electrodes.

Change hours to seconds first: 2.00 h = s. Then q = It and n(e⁻) = q ÷ F.

Each copper atom gives electrons, so n(Cu) = n(e⁻) ÷ 2. The anode this mass.

Example

In copper refining, a copper anode dissolves and pure copper plates onto the cathode. A current of 10.0 A runs for 2.00 hours. What mass of copper dissolves from the anode? M(Cu) = 63.55 g/mol.

Try it

In copper refining, a current of 6.00 A runs for 1.00 hour. What mass of copper dissolves from the anode? M(Cu) = 63.55 g/mol.

Practice 1

Given a cathode that gains 0.850 g of silver in 15.0 minutes from Ag⁺ + e⁻ → Ag (M = 107.87 g/mol). Find the constant current.

Practice 2

Given 1.50 A for 30.0 minutes and 0.485 g of a metal deposited (M = 52.00 g/mol). Find the charge on the metal ion.

Practice 3

Given a zinc and copper voltaic cell that delivers 0.800 A for 45.0 minutes (M(Zn) = 65.41; M(Cu) = 63.55 g/mol). Find the mass of zinc lost and the mass of copper gained.

Practice 4

Given Na₂SO₄(aq) with inert electrodes and 3.00 A for 20.0 minutes. Find the moles of hydrogen and oxygen formed.

Practice 5

Given a cathode of 20.00 g that has a mass of 21.20 g after copper plating at 2.00 A. Find the time in minutes (M(Cu) = 63.55 g/mol).

Practice 6

Given a copper anode in a refining cell with 5.00 A for 90.0 minutes. Find the mass lost by the anode (M(Cu) = 63.55 g/mol).

Practice 7

Challenge: Given 2.00 A for 25.0 minutes, which deposits 0.912 g of an unknown metal from a solution of its 2+ ions. Find the molar mass of the metal in g/mol. Then name the metal, using the periodic table in the Data Booklet. Use F = 9.65 × 10⁴ C/mol e⁻.