B10 · Faraday's law · Completed notes
Download the printable PDF
Goals: Find the charge from current and time, with the time in seconds. Use the Faraday constant and a half-reaction to find moles of metal. Find the mass deposited, or the time needed, in an electrolysis.
Slide 1 of 8 · Current is charge per second
Key ideas
Electric charge is measured in coulombs, C. Current, I, is the charge that passes a point every second.
Current is measured in amperes, A. One ampere means one coulomb each second.
Charge equals current times time: q = It. Here q is the charge in coulombs, I is the current in amperes and t is the time in seconds.
If the time is in minutes or hours, change it to seconds first. 1 min = 60 s and 1 h = 3600 s.
Example
A current of 4.00 A runs through an electrolytic cell for 5.00 minutes. How much charge moves, in coulombs?
- Time in seconds: 5.00 × 60 = 300 s
- q = It = 4.00 A × 300 s
- q = 1200 C
Try it
A current of 2.50 A runs through an electrolytic cell for 12.0 minutes. How much charge moves, in coulombs?
- Time in seconds: 12.0 × 60 = 720 s
- q = It = 2.50 A × 720 s
- q = 1.80 × 10³ C
Slide 2 of 8 · Charge to moles of electrons
Key ideas
One mole of electrons carries 9.65 × 10⁴ C. This is the Faraday constant, F, printed in the Data Booklet on p. 3.
F = 9.65 × 10⁴ C/mol e⁻. The unit says coulombs for each mole of electrons.
To change coulombs to moles of electrons, divide by F: n(e⁻) = q ÷ F. Here n(e⁻) is the moles of electrons and q is the charge.
Coulombs divided by coulombs per mole leaves moles. A small charge should give a small number of moles.
Example
A charge of 1500 C moves through a cell. How many moles of electrons is that? Use F = 9.65 × 10⁴ C/mol e⁻.
- n(e⁻) = q ÷ F = 1500 C ÷ (9.65 × 10⁴)
- n(e⁻) = 0.0155 mol
- Check: 1500 C is a small piece of 9.65 × 10⁴ C, so a small answer makes sense.
Try it
A charge of 4.80 × 10³ C moves through a cell. How many moles of electrons is that? Use F = 9.65 × 10⁴ C/mol e⁻.
- n(e⁻) = q ÷ F = 4800 C ÷ (9.65 × 10⁴)
- n(e⁻) = 0.0497 mol
Slide 3 of 8 · Electrons to moles of metal
Key ideas
The coefficient of e⁻ in the reduction half-reaction gives the mole ratio. In Cu²⁺ + 2e⁻ → Cu, 2 mol of electrons make 1 mol of copper.
So n(Cu) = n(e⁻) ÷ 2. Here n(Cu) is the moles of copper.
For silver, Ag⁺ + e⁻ → Ag, the ratio is 1 to 1. For aluminium, Al³⁺ + 3e⁻ → Al, divide by 3.
The ratio is set by the charge on the ion. Write the half-reaction every time and never guess the ratio.
Example
A cell supplies 0.0155 mol of electrons to the cathode, where Cu²⁺ + 2e⁻ → Cu. How many moles of copper form?
- The half-reaction shows 2 mol e⁻ make 1 mol Cu.
- n(Cu) = n(e⁻) ÷ 2 = 0.0155 mol ÷ 2
- n(Cu) = 0.00775 mol
Try it
A cell supplies 0.0450 mol of electrons to the cathode, where Al³⁺ + 3e⁻ → Al. How many moles of aluminium form?
- The half-reaction shows 3 mol e⁻ make 1 mol Al.
- n(Al) = n(e⁻) ÷ 3 = 0.0450 mol ÷ 3
- n(Al) = 0.0150 mol
Slide 4 of 8 · The full chain to a mass
Key ideas
The Faraday chain is: current and time give charge, charge gives moles of electrons, the half-reaction gives moles of metal, and molar mass gives mass.
First change the time to seconds and find q = It. Then n(e⁻) = q ÷ F. Then divide by the coefficient of e⁻ to find n(metal).
Finally m = nM. Here n is the moles of metal and M is the molar mass in g/mol, from the periodic table.
The chain as one formula is m = (I × t × M) ÷ (z × F). Here z is the electrons per ion in the half-reaction, and t is in seconds.
Example
Zinc is plated from Zn²⁺ solution by a current of 2.50 A for 25.0 minutes. What mass of zinc forms at the cathode? M(Zn) = 65.41 g/mol.
- Time in seconds: 25.0 × 60 = 1500 s
- q = It = 2.50 × 1500 = 3750 C
- n(e⁻) = 3750 ÷ (9.65 × 10⁴) = 0.038860 mol
- Zn²⁺ + 2e⁻ → Zn, so n(Zn) = 0.038860 ÷ 2 = 0.019430 mol
- m = nM = 0.019430 × 65.41 = 1.27 g
Try it
Copper is plated from Cu²⁺ solution by a current of 3.00 A for 30.0 minutes. What mass of copper forms at the cathode? M(Cu) = 63.55 g/mol.
- Time in seconds: 30.0 × 60 = 1800 s
- q = It = 3.00 × 1800 = 5400 C
- n(e⁻) = 5400 ÷ (9.65 × 10⁴) = 0.05596 mol
- Cu²⁺ + 2e⁻ → Cu, so n(Cu) = 0.05596 ÷ 2 = 0.02798 mol
- m = nM = 0.02798 × 63.55 = 1.78 g
Slide 5 of 8 · Method: how to find a mass from current and time
Key ideas
Step 1. Change the time to seconds. Multiply minutes by 60.
Step 2. Find the charge: q = It.
Step 3. Find the moles of electrons: n(e⁻) = q ÷ F, with F = 9.65 × 10⁴ C/mol e⁻.
Step 4. Use the half-reaction ratio to find the moles of the substance.
Step 5. Find the mass: m = nM.
Step 6. Round once, at the end, to three significant digits.
Example
Use the method on 2.50 A for 25.0 minutes plating zinc from Zn²⁺ solution. Find the mass of zinc.
- Step 1: 25.0 × 60 = 1500 s.
- Step 2: q = 2.50 × 1500 = 3750 C.
- Step 3: n(e⁻) = 3750 ÷ (9.65 × 10⁴) = 0.038860 mol.
- Step 4: n(Zn) = 0.038860 ÷ 2 = 0.019430 mol.
- Steps 5 and 6: m = 0.019430 × 65.41 = 1.2709 g, which rounds to 1.27 g.
Try it
Use the method on 1.50 A for 20.0 minutes plating silver from Ag⁺ solution. M(Ag) = 107.87 g/mol. Find the mass of silver.
- q = 1.50 × 1200 = 1800 C.
- n(e⁻) = 1800 ÷ (9.65 × 10⁴) = 0.018653 mol. n(Ag) = 0.018653 mol, because Ag⁺ + e⁻ → Ag.
- m = 0.018653 × 107.87 = 2.0121 g, which rounds to 2.01 g.
Slide 6 of 8 · Your turn: silver
Key ideas
Hours must be changed to seconds in two steps: 1.00 h = 60 min = 3600 s.
Charge: q = It = 0.500 A × 3600 s = 1800 C. Then n(e⁻) = q ÷ F = 0.01865 mol.
In Ag⁺ + e⁻ → Ag the ratio is 1 to 1, so n(Ag) = n(e⁻). Show this step even when the ratio is 1 to 1.
Finally m = n × M = 0.01865 mol × 107.87 g/mol. Check that the units give grams: mol × g/mol leaves grams.
Example
A silver nitrate solution carries 0.500 A for 1.00 hour. The half-reaction is Ag⁺ + e⁻ → Ag. What mass of silver forms at the cathode? M(Ag) = 107.87 g/mol.
- Time in seconds: 1.00 × 3600 = 3600 s
- q = It = 0.500 × 3600 = 1800 C
- n(e⁻) = 1800 ÷ (9.65 × 10⁴) = 0.01865 mol
- Ratio 1 to 1, so n(Ag) = 0.01865 mol
- m = nM = 0.01865 × 107.87 = 2.01 g
Try it
A copper(II) sulfate solution carries 0.750 A for 45.0 minutes. The half-reaction is Cu²⁺ + 2e⁻ → Cu. What mass of copper forms at the cathode? M(Cu) = 63.55 g/mol.
- Time in seconds: 45.0 × 60 = 2700 s
- q = It = 0.750 × 2700 = 2025 C
- n(e⁻) = 2025 ÷ (9.65 × 10⁴) = 0.02098 mol
- n(Cu) = 0.02098 ÷ 2 = 0.01049 mol
- m = nM = 0.01049 × 63.55 = 0.667 g
Slide 7 of 8 · Running the chain backward
Key ideas
To run the chain backward, start at the given mass and find moles with n = m ÷ M. Here m is the mass in grams and M is the molar mass.
Go from metal to electrons by multiplying by the coefficient of e⁻. For Al³⁺ + 3e⁻ → Al, n(e⁻) = 3 × n(Al).
Change moles of electrons to charge by multiplying by F. Then find the time with t = q ÷ I.
Coulombs divided by amperes leaves seconds. Divide by 60 for minutes if the question asks for minutes.
Example
We want 1.00 g of aluminium from Al³⁺ using a steady current of 5.00 A. How long must the current run, in seconds and in minutes? M(Al) = 26.98 g/mol.
- n(Al) = 1.00 ÷ 26.98 = 0.03706 mol
- Al³⁺ + 3e⁻ → Al, so n(e⁻) = 3 × 0.03706 = 0.1112 mol
- q = 0.1112 × (9.65 × 10⁴) = 1.073 × 10⁴ C
- t = q ÷ I = 1.073 × 10⁴ ÷ 5.00 = 2146 s
- t = 2146 ÷ 60 = 35.8 min
Try it
We want 1.50 g of zinc from Zn²⁺ using a steady current of 3.00 A. How long must the current run, in minutes? M(Zn) = 65.41 g/mol.
- n(Zn) = 1.50 ÷ 65.41 = 0.02293 mol
- Zn²⁺ + 2e⁻ → Zn, so n(e⁻) = 2 × 0.02293 = 0.04586 mol
- q = 0.04586 × (9.65 × 10⁴) = 4425 C
- t = q ÷ I = 4425 ÷ 3.00 = 1475 s
- t = 1475 ÷ 60 = 24.6 min
Slide 8 of 8 · What the calculation assumes
Key ideas
The calculation assumes all the charge makes the wanted metal. In real cells some charge goes to side reactions, so a little less metal forms.
Mass deposited is the mass the cathode gained: the final mass minus the starting mass.
The same chain also works in a voltaic cell. The electrons in the wire come from the anode half-reaction.
In a zinc and copper cell, Zn → Zn²⁺ + 2e⁻ and Cu²⁺ + 2e⁻ → Cu. The same electrons do both jobs.
Example
A cathode has a mass of 31.40 g before plating and 32.15 g after plating. What is the mass deposited? What does the calculation assume about the charge?
- Mass deposited = final mass − starting mass
- 32.15 g − 31.40 g = 0.75 g
- The calculation assumes all the charge made the wanted metal, with no side reactions.
Try it
In a zinc and copper voltaic cell, 0.0200 mol of electrons pass through the wire. How many moles of zinc are oxidized at the anode, and how many moles of copper deposit on the cathode?
- Zn → Zn²⁺ + 2e⁻, so n(Zn) = 0.0200 ÷ 2 = 0.0100 mol
- Cu²⁺ + 2e⁻ → Cu, so n(Cu) = 0.0200 ÷ 2 = 0.0100 mol
- The same electrons do both jobs, so the moles are equal.
Practice 1
Given a current of 4.00 A for 30.0 minutes. Find the charge that moves, in coulombs.
The time is 30.0 × 60 = 1800 s. q = It = 4.00 A × 1800 s = 7.20 × 10³ C.
Practice 2
Given a charge of 7.20 × 10³ C. Find the moles of electrons, using F = 9.65 × 10⁴ C/mol e⁻.
n(e⁻) = q ÷ F = 7.20 × 10³ ÷ (9.65 × 10⁴) = 0.0746 mol.
Practice 3
Given 0.0746 mol of electrons and the half-reaction Cu²⁺ + 2e⁻ → Cu. Find the moles of copper formed and the mass (M = 63.55 g/mol).
n(Cu) = 0.0746 ÷ 2 = 0.0373 mol. m = 0.0373 × 63.55 = 2.37 g.
Practice 4
Given 2.00 A for 45.0 minutes and the half-reaction Zn²⁺ + 2e⁻ → Zn (M = 65.41 g/mol). Find the mass of zinc deposited.
Use Method: how to find a mass from current and time. q = 2.00 × 2700 = 5400 C. n(e⁻) = 5400 ÷ (9.65 × 10⁴) = 0.0560 mol. n(Zn) = 0.0280 mol. m = 0.0280 × 65.41 = 1.83 g.
Practice 5
Given 1.50 A for 2.00 hours and Ag⁺ + e⁻ → Ag (M = 107.87 g/mol). Find the mass of silver deposited.
q = 1.50 × 7200 = 1.08 × 10⁴ C. n(e⁻) = 0.112 mol. n(Ag) = 0.112 mol. m = 0.112 × 107.87 = 12.1 g.
Practice 6
Given that 2.00 g of copper must form from Cu²⁺ at a steady 2.50 A (M = 63.55 g/mol). Find the time needed in minutes.
n(Cu) = 2.00 ÷ 63.55 = 0.03147 mol. n(e⁻) = 0.06294 mol. q = 0.06294 × (9.65 × 10⁴) = 6074 C. t = 6074 ÷ 2.50 = 2430 s = 40.5 min.
Practice 7
Challenge: Given two electrolytic cells joined in a row, so the same current passes through both. One cell plates silver (Ag⁺ + e⁻ → Ag, M = 107.87 g/mol). The other plates copper (Cu²⁺ + 2e⁻ → Cu, M = 63.55 g/mol). The current is 1.25 A for 20.0 minutes. Find the mass of each metal deposited, in grams. Use F = 9.65 × 10⁴ C/mol e⁻.
Time: t = 20.0 × 60 = 1200 s. Charge: q = It = 1.25 × 1200 = 1500 C. The same charge passes through both cells. Moles of electrons: n(e⁻) = 1500 ÷ (9.65 × 10⁴) = 0.015544 mol. Silver, ratio 1 to 1: n(Ag) = 0.015544 mol, so m = 0.015544 × 107.87 = 1.68 g. Copper, ratio 2 e⁻ to 1 Cu: n(Cu) = 0.007772 mol, so m = 0.007772 × 63.55 = 0.494 g. Equal charge does not give equal mass.
The PDF key follows the slides, with worked answers.