B9 · Electrolysis of aqueous solutions · Notes and practice

Download the printable PDF

Decide what reacts at each electrode when water is present, explain the chloride exception and why E° must be used with caution, and predict products and observations.

Open the complete lesson

Type in the blanks; your notes save on this device only. Use the backup controls at the bottom to keep a portable copy. Nothing is submitted.

1. Water joins the competition

Choose by table value

In B8 the cells held a molten salt, so only its ions could react. In a water solution, water is in the beaker too, and it can react at either electrode.

Water can be reduced: 2H₂O + 2e⁻ → H₂ + 2OH⁻, . Water can be oxidized: 2H₂O → O₂ + 4H⁺ + 4e⁻, which is the O₂ row run backward, from the row.

At the cathode, the strongest oxidizing agent is reduced, and it has the value. At the anode, the strongest reducing agent is oxidized, and it has the value.

Na⁺ (−2.71 V) is lower than water, so is reduced at the cathode. It makes H₂ gas and , so the solution turns basic and the pH . Red litmus turns blue there. Sodium metal never forms from a water solution.

On the diploma: list every ion, and water. At the cathode pick the highest value. At the anode pick the lowest. Picking the highest at the anode is a common wrong choice.

Watch: Electrolysis of water (Tyler DeWitt, “Electrolysis”, 19:02)

Cathode examples

Cu²⁺ (+0.34 V) is higher than water, so is reduced to copper metal. The cathode mass and the blue colour fades as Cu²⁺ is used up.

The dividing line is −0.83 V. A cation above it, like Ag⁺ or Cu²⁺, is reduced before . A cation below it, like Na⁺, Mg²⁺ or Al³⁺, loses to water.

Zn²⁺ (−0.76 V) is just above the line, so it is predicted to win by a small margin. This is a prediction from the table, so compare numbers every time.

On the diploma: the wrong options usually reduce a metal that sits below water.

Cathode choices: Cu²⁺ +0.34 V or water −0.83 V. Reduced: _______Anode choices: sulfate (not oxidized) or water +1.23 V. Oxidized: _______Products: cathode _______; anode _______Near the anode the pH _______ because H⁺ is made.
Electrolysis of copper(II) sulfate solution with inert electrodes. Choose the species reduced and oxidized, the products and the pH change at the anode.

2. Anodes and the chloride exception

Choose the anode reaction

Take NaI(aq) with inert electrodes, which means electrodes that do not react, like carbon or platinum. I⁻ (+0.54 V) is lower than water (+1.23 V), so is oxidized: 2I⁻ → + 2e⁻.

We observe a brown colour near the anode and infer that forms. The Na⁺ ions are spectator ions, which means they do not react at either electrode.

In CuSO₄(aq), sulfate appears in the booklet only as a product, in the S₂O₈²⁻ row at +2.01 V. That is higher than water, so sulfate is not oxidized and is: 2H₂O → O₂ + + 4e⁻.

Oxygen bubbles form, and H⁺ is made, so the pH near the anode. Blue litmus turns red there.

A reactive electrode can react itself. A copper anode (+0.34 V) is lower than water, so copper is the stronger reducing agent: Cu → Cu²⁺ + 2e⁻. The anode and loses mass.

On the diploma: sulfate and nitrate are not oxidized, so water reacts. Always check what the electrode is made of. A wrong option ignores a reactive anode.

The chloride anomaly

In NaCl(aq), Cl⁻ is +1.36 V and water is +1.23 V. Water has the lower value, so the table predicts oxygen. But chlorine gas is : 2Cl⁻ → Cl₂ + 2e⁻.

This is the chloride . The reason is overvoltage, the extra voltage some reactions need to run at a useful rate. Oxidizing water needs a overvoltage than oxidizing chloride, so chloride reacts.

So think of a table value as a minimum, not a promise. E° values must be used with . The table minimum is enough on its own, because an extra overvoltage must be applied.

On the diploma: write the table prediction first, then check for exceptions. In a chloride solution the observed product is chlorine gas. An option saying the table minimum is enough is a wrong choice.

3. Predict products and observations

Sodium bromide

Take NaBr(aq) with inert electrodes. At the cathode, water (−0.83 V) beats Na⁺ (−2.71 V), so is reduced: 2H₂O + 2e⁻ → H₂ + 2OH⁻.

At the anode, Br⁻ (+1.07 V) is lower than water (+1.23 V), so is oxidized: 2Br⁻ → Br₂ + 2e⁻. This is not a chloride case, so there is no exception.

Both halves move two electrons, so no multiplier is needed. The cell reaction is 2Br⁻ + 2H₂O → Br₂ + H₂ + . Atoms and charge check: Br 2, H 4, O 2, charge −2 on each side.

E°cell = −0.83 − 1.07 = . The pH rises near the , because OH⁻ is made there.

On the diploma: E°cell is in volts, and the sign matters.

Observations and inferences

What we can see is an : bubbles at the cathode and a brown-orange colour near the anode.

Hydrogen gas, bromine and a rising pH are from the half-reactions. A pH , a dye that changes colour with pH, can test the pH.

On the diploma: keep observation and inference apart. You see colour and bubbles. From them you work out each product.

Watch: Twice as much hydrogen as oxygen (Tyler DeWitt, “Electrolysis”, 22:58)

Copper sulfate and sodium sulfate

CuSO₄(aq) with inert electrodes: copper forms at the , Cu²⁺ + 2e⁻ → Cu. O₂ forms at the anode and the pH .

The water half moves four electrons and each copper half only two, so multiply the copper half by 2. Then add: 2Cu²⁺ + 2H₂O → 2Cu + O₂ + .

E°cell = 0.34 − 1.23 = −0.89 V, so the source must supply more than 0.89 V. The blue colour fades and the solution turns more acidic.

Na₂SO₄(aq): neither ion reacts, so water reacts at both electrodes. The ions only carry charge through the solution.

Double the cathode half to match four electrons: 4H₂O + 4e⁻ → 2H₂ + 4OH⁻. Adding gives 6H₂O → 2H₂ + O₂ + 4OH⁻ + 4H⁺.

The 4OH⁻ and 4H⁺ make 4H₂O, so the overall reaction is 2H₂O → + O₂, a 2 : 1 ratio of H₂ to O₂.

On the diploma: expect the 2 to 1 ratio of H₂ to O₂ in a numerical-response item. H⁺ on the product side means the pH goes down.

Use the diagram response box for labels and arrows in words, or draw on the printable PDF.

Answer the 12 core practice problems online · Completed notes and worked key

B9-P01

Explain why there are more possible reactions in an aqueous solution than in a molten salt.

Response: ____________________

B9-P02

Given NaNO₃(aq) with inert electrodes (Na⁺ −2.71 V; water −0.83 V). Decide what is reduced at the cathode, write the half-reaction and state the change in pH near the cathode.

Response: ____________________

B9-P03

Given CuSO₄(aq) with inert electrodes (Cu²⁺ +0.34 V; water −0.83 V). Decide what is reduced at the cathode and predict the change in mass of the cathode and the colour of the solution near it.

Response: ____________________

B9-P04

Given NaI(aq) with inert electrodes (I₂/I⁻ +0.54 V; O₂/H₂O +1.23 V). Decide what is oxidized at the anode, write the half-reaction and describe the observation and the inference.

Response: ____________________

B9-P05

In CuSO₄(aq) with inert electrodes, water is oxidized at the anode. Write the half-reaction and predict the observation at the anode and the change in pH near it.

Response: ____________________

B9-P06

Given CuSO₄(aq) with a copper anode and an inert cathode (Cu²⁺/Cu +0.34 V; O₂/H₂O +1.23 V). Decide what is oxidized at the anode and predict the change in its mass.

Response: ____________________

B9-P07

Aqueous NaCl is electrolyzed with inert electrodes. State the product at the anode that the table predicts, the product that is observed, and the reason for the difference.

Response: ____________________

B9-P08

Given NaBr(aq) with inert electrodes (water −0.83 V; Br₂/Br⁻ +1.07 V; O₂/H₂O +1.23 V). Write the cell reaction and calculate E°cell.

Response: ____________________

B9-P09

Given CuSO₄(aq) with inert electrodes. Match the electrons in the half-reactions, write the cell reaction and calculate E°cell (Cu²⁺/Cu +0.34 V; O₂/H₂O +1.23 V).

Response: ____________________

B9-P10

Given Na₂SO₄(aq) with inert electrodes. Write the half-reactions with matched electrons and the overall reaction, and say which gas forms in the larger amount.

Response: ____________________

B9-P11

A student says that applying the minimum voltage from the table guarantees the predicted reaction. Use aqueous NaCl to explain why this is not correct.

Response: ____________________

B9-P12

Given AgNO₃(aq) with inert electrodes (Ag⁺ +0.80 V; water −0.83 V; O₂/H₂O +1.23 V). State what is reduced and what is oxidized and write the cell reaction.

Response: ____________________