B8 · Extra diploma-style practice · Solutions
Download PDF · Answer online
B8-D01
A student wants to drive Mg²⁺ + Zn → Mg + Zn²⁺ with a power source (Mg²⁺/Mg −2.37 V; Zn²⁺/Zn −0.76 V). What voltage must the source exceed, in volts to two decimal places?
- E°cell = −2.37 − (−0.76) = −1.61 V. The source must exceed the size of this value, 1.61 V.
- Cathode minus anode, then use the size of the negative value.
B8-D02
In an electrolytic cell, which terminal of the power source is the cathode joined to?
- The positive terminal
- The negative terminal
- Neither terminal
- Both terminals
- Electrons are pushed out of the negative terminal and arrive at the cathode, where reduction happens.
- The names anode and cathode follow the chemistry. The sign follows from where the electrons come from.
B8-D03
In an electrolytic cell, which ions move toward the anode?
- Cations
- Anions
- Electrons
- Neutral atoms
- The anode is positive, so anions move toward it. Cations move toward the negative cathode.
- Electrons move only in the wires.
B8-D04
For the electrolysis of molten NaCl, what is E°cell in volts to two decimal places? Use Na⁺/Na −2.71 V and Cl₂/Cl⁻ +1.36 V.
- Na⁺ is reduced at the cathode and Cl⁻ is oxidized at the anode. E°cell = −2.71 − 1.36 = −4.07 V.
- The negative sign shows that a power source is needed.
B8-D05
Select every correct statement about electrolytic cells.
- Oxidation happens at the anode
- A power source is needed
- The anode is the negative electrode
- A salt bridge is not required
- Oxidation always happens at the anode. A power source drives the reaction. A salt bridge is not required for an electrolytic cell.
- In an electrolytic cell the anode is positive, not negative.
B8-D06
Match each feature to the cell type it describes.
Items
- Needs a power source
- Needs a salt bridge or porous barrier
- Anode is negative
- Anode is positive
Targets
- Voltaic cell
- Electrolytic cell
- An electrolytic cell needs a power source and has a positive anode. A voltaic cell needs a salt bridge and has a negative anode.
- The definitions of anode and cathode are the same in both.
B8-D07
How many electrons appear in the anode half-reaction 2Cl⁻ → Cl₂ + 2e⁻? Enter an integer.
- Two chloride ions each give up one electron, so the half-reaction shows 2e⁻.
- Each Cl₂ molecule needs two electrons.
B8-D08
To plate a metal spoon with silver, which statement is correct?
- The spoon is the anode
- The spoon is the cathode
- The spoon is not connected
- The spoon is the salt bridge
- Silver ions are reduced to silver metal at the cathode, so the spoon is the cathode.
- Reduction deposits the metal, and reduction always happens at the cathode.
B8-D09
What is E°cell in volts for a cell with silver electrodes in silver nitrate solution? Enter to two decimal places.
- The same half-cell is used at both electrodes: 0.80 − 0.80 = 0.00 V.
- A small voltage is still needed in practice to overcome resistance.
B8-D10
Arrange the steps for predicting the electrolysis of a molten salt.
First to last
- Calculate E°cell and the minimum voltage
- Write the reduction and the oxidation
- Send the cation to the cathode and the anion to the anode
- List the ions present
- Match the electrons and add the halves
- List the ions, decide the electrode for each, write the halves, match and add, then calculate.
- The ions are listed first because they decide what can react.
B8-D11
In a copper refining cell, which electrode gains mass?
- The impure copper anode
- The pure copper cathode
- The salt bridge
- Neither electrode
- Cu²⁺ is reduced at the cathode, so pure copper builds up there.
- The anode dissolves, so it loses mass.
B8-D12
A student says that a negative E°cell means a reaction can never be made to happen. Explain what is wrong.
- A negative value means the reaction is not spontaneous by itself.
- A power source with a voltage greater than the size of the value can drive the reaction, as in an electrolytic cell.