B4 · Predict reactions and investigate · Notes and practice
Download the printable PDF
Use test results and the Data Booklet reduction table to predict direction, then judge an investigation’s conclusions.
Open the complete lesson
Type in the blanks; your notes save on this device only. Use the backup controls at the bottom to keep a portable copy. Nothing is submitted.
1. Evidence and strength
Separate observations from their explanation
Balancing cannot tell us which way a reaction goes. Zn + Cu²⁺ → Zn²⁺ + Cu balances, and so does its reverse. A balanced equation does not by itself prove a . Spontaneous means it goes on its own. It does not mean fast.
Here are two example test results. Your class did not measure them. A strip of zinc in a Cu²⁺ solution gets a copper coating. A strip of copper in an Ag⁺ solution gets a silver coating. A new metal coating is evidence that dissolved ions to become metal. The electrons came from the metal that dissolved.
So a metal that gives electrons to another metal’s ions is the stronger reducing agent. The two comparisons link through copper. Reducing agents rank . The matching ions run the other way: oxidizing agents rank . A metal and its ion have different roles.
On the diploma: build the order from the pairs, and say which metal was the reducing agent in each pair. Write the exact formula, such as Ag⁺, not just silver.
Watch: What you would see: bubbles of hydrogen gas (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 11:01)
Watch: Observations to report: bubbles, pop test, litmus (Alberta Chemistry Teacher, “Chemistry 30 - Example: predicting redox reaction and observations of reactants and products”, 12:03)
Watch: What a falling H⁺ does to the pH (Alberta Chemistry Teacher, “Chemistry 30 - Example: predicting redox reaction and observations of reactants and products”, 12:22)
Read a reduction row
Every row in the Alberta Chemistry 30 Data Booklet table of standard reduction potentials is written as a reduction. The electrons are on the . The oxidizing agents are on the left, and the strongest is at the top. The reducing agents are on the right, and the strongest is at the bottom. A metal on the right side of a row can act as a reducing agent, but only when you read that row .
An oxidizing agent reacts spontaneously with a reducing agent that is below it in the table. Ag⁺ is above Cu, so they react. Zn²⁺ is below Cu, so they do not. That is why a copper container can hold a Zn²⁺ solution.
You can only choose substances that are really in the beaker. List every ion, any metal, and water. An acidic or “acidified” solution also has H⁺, and a basic solution has OH⁻. A strong oxidizing agent elsewhere in the booklet is not in your beaker. It is like picking a team from the people who showed up. Choose the strongest and from what is in the beaker.
Label the diagram with the order of reducing agents and the order of oxidizing agents. These are example results, not measurements from a class experiment.
On the diploma: use the substances given in the question, not every row of the table.
Watch: The forward arrow in the table is the reduction (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 2:44)
Watch: Flip the row to write the oxidation (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 3:10)
Example results: zinc gets a copper coating in Cu2+; copper gets a silver coating in Ag+. Complete the order of donors and the order of acceptors.2. What the table values mean
Energy per charge, measured from one starting point
The symbol E means , measured in volts. The small ° means : 1.0 mol/L, 25.00 °C and 101.325 kPa.
A voltage is the . One volt means , and a coulomb is a unit of electric charge. For 150 J moved by 100 C, 150 ÷ 100 = . Double both and 300 ÷ 200 is still .
Every table value is measured from the same starting point, the hydrogen half-reaction, 2H⁺ + 2e⁻ → H₂, which is given . Each half-reaction is printed as a . A more positive value means a stronger pull on electrons under table conditions.
A table value is not a voltage you could read from one beaker. Voltage compares a . In this lesson, putting a metal in a solution gives us a prediction only. It does not measure the voltage of a real cell.
On the diploma: remember the table lists reductions only. Changing a coefficient never changes E°.
Pick the roles first, then subtract
Use E°reaction = E° of the minus E° of the . We subtract because the reducing agent’s half runs . Do not just take larger minus smaller.
A positive answer means the written direction is spontaneous under standard conditions. A negative answer means is spontaneous. It tells you nothing about . Doubling the amounts does not change the energy per charge, so never multiply E° by the coefficients.
On the diploma: a common wrong option gives Cu + Zn²⁺ a positive E° by subtracting in the wrong order. Check which one is the reducing agent first.
Watch: List everything that is present (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 0:03)
Watch: Label the oxidizing and reducing agents (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 1:33)
Watch: Find the best of each (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 2:24)
A mixture changes the choice, not the method
Suppose a beaker holds Zn(s), Cu(s), Ag⁺ and Cu²⁺. Use only what is present. The strongest reducing agent is and the strongest oxidizing agent is . Choose them before you write any equation.
The reaction is Zn + 2Ag⁺ → Zn²⁺ + 2Ag. E° = +0.80 - (-0.76) = . Cu and Cu²⁺ are still in the mixture, but they are not part of this .
This predicts which reaction the strongest pair starts with. It does not tell you the final mixture, or the order other reactions would follow.
Watch: Zinc in hydrochloric acid: list everything present (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 6:02)
Watch: Watch for pairs such as chloride and water (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 9:37)
Watch: Build the list from a longer formula list (Alberta Chemistry Teacher, “Chemistry 30 - Example: predicting redox reaction and observations of reactants and products”, 0:36)
Watch: Tin(II) is both an oxidizing and a reducing agent (Alberta Chemistry Teacher, “Chemistry 30 - Example: predicting redox reaction and observations of reactants and products”, 2:22)
Watch: The common mistake: missing tin(II) as a reducing agent (Alberta Chemistry Teacher, “Chemistry 30 - Example: predicting redox reaction and observations of reactants and products”, 7:42)
3. Predict, then test the claim
Table values
From the Alberta Chemistry 30 Data Booklet, printed as reductions: Ag⁺/Ag ; Cu²⁺/Cu ; Zn²⁺/Zn . These hold at standard table conditions, which are 1.0 mol/L solutions at 25.00 °C. A more positive value means a stronger pull on electrons.
For the reaction as written, E°reaction = E° of the minus E° of the . We subtract because the reducing agent runs its table row backwards, as an oxidation. A positive result means the written direction is spontaneous. A negative result means the reverse is spontaneous.
For Cu + 2Ag⁺ → Cu²⁺ + 2Ag, Ag⁺ is the oxidizing agent and Cu is the reducing agent: +0.80 - (+0.34) = . A volt is one joule of energy per coulomb of charge, so it is a ratio. Do not multiply E° when you multiply a half-reaction’s coefficients.
On the diploma: check which value is the oxidizing agent’s and which is the reducing agent’s before you subtract.
Direction matters
For the proposed Cu + Zn²⁺ → Cu²⁺ + Zn, Zn²⁺ is the oxidizing agent and Cu is the reducing agent: -0.76 - (+0.34) = . Always taking larger minus smaller skips the choice of reducing agent and oxidizing agent. It can answer the wrong direction.
The negative sign means the reverse, Zn with Cu²⁺, is spontaneous at +1.10 V. The sign tells direction, not speed. No visible change in a short trial is , because the reaction might be too slow to see.
On the diploma: a sign-flipped answer is a common wrong option, so match the sign to the reducing agent and the oxidizing agent.
Watch: The spontaneity rule: oxidizing agent above reducing agent (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 4:59)
Watch: Below means it does not happen by itself (Alberta Chemistry Teacher, “Chemistry 30 - Predicting redox reaction from species in the reduction table”, 5:18)
Watch: Check the spontaneity rule at the end (Alberta Chemistry Teacher, “Chemistry 30 - Example: predicting redox reaction and observations of reactants and products”, 10:09)
A fair comparison and a supported conclusion
In a fair test, change one metal-ion pair at a time. Keep the concentration, volume, strip size, temperature and time . Add a : a test where nothing should happen, such as Cu in Cu²⁺.
A good conclusion gives a claim, then the evidence, then an . Name the metal, the ion that changed and who gave the electrons. The simulation follows fixed rules, so running it again adds no new . It does not test hands-on lab skill.
On the diploma: tell an observation, such as seeing a deposit, from an inference, such as saying a metal is the stronger reducing agent. Cite the actual comparisons in your answer.
Use the diagram response box for labels and arrows in words, or draw on the printable PDF.
Answer the 12 core practice problems online · Completed notes and worked key
B4-P01
In the reaction Zn + Cu²⁺ → Zn²⁺ + Cu, name the reducing agent and the oxidizing agent. Which metal is the stronger reducing agent, Zn or Cu?
Response: ____________________
B4-P02
Test results: Zn gives electrons to Cu²⁺, and Cu gives electrons to Ag⁺. Put Zn, Cu and Ag in order as reducing agents, strongest first. Say which two results support your order.
Response: ____________________
B4-P03
The metals are in the order Zn > Cu > Ag as reducing agents. Put their ions, Ag⁺, Zn²⁺ and Cu²⁺, in order as oxidizing agents, strongest first.
Response: ____________________
B4-P04
A beaker contains Cu(s), Ag⁺(aq) and nitrate ions. The nitrate ions are spectator ions here. Which two substances could react in a redox reaction? Explain why Zn cannot be one of them.
Response: ____________________
B4-P05
Use these rows from the Data Booklet table of standard electrode potentials: Ag⁺ + e⁻ → Ag, +0.80 V; Cu²⁺ + 2e⁻ → Cu, +0.34 V; Zn²⁺ + 2e⁻ → Zn, -0.76 V. The conditions are standard: 25 °C and 1.0 mol/L solutions. Copper metal is put in a solution of Ag⁺. Calculate E° for the reaction and write the balanced net equation. Is the reaction spontaneous?
Response: ____________________
B4-P06
Use these rows from the Data Booklet table of standard electrode potentials: Ag⁺ + e⁻ → Ag, +0.80 V; Cu²⁺ + 2e⁻ → Cu, +0.34 V; Zn²⁺ + 2e⁻ → Zn, -0.76 V. The conditions are standard: 25 °C and 1.0 mol/L solutions. Calculate E° for the reaction Cu + Zn²⁺ → Cu²⁺ + Zn. Is the reaction spontaneous as written?
Response: ____________________
B4-P07
Use these rows from the Data Booklet table of standard electrode potentials: Ag⁺ + e⁻ → Ag, +0.80 V; Cu²⁺ + 2e⁻ → Cu, +0.34 V; Zn²⁺ + 2e⁻ → Zn, -0.76 V. The conditions are standard: 25 °C and 1.0 mol/L solutions. Zinc metal is put in a solution of Ag⁺. Write the balanced equation and calculate E°. A student doubles +0.80 V because two Ag⁺ are needed. Explain the mistake.
Response: ____________________
B4-P08
A simulation shows the same result every time a test is replayed. Can five replays tell you how much a real experiment changes from try to try? Say what the replays can check, and one thing they cannot measure.
Response: ____________________
B4-P09
Test results, all under the same conditions: a strip of metal A in B²⁺ solution gets a coating of metal B. A strip of metal B in C⁺ solution gets a coating of metal C. Predict what happens when A is put in C⁺ solution. Write the balanced equation. A forms A²⁺. Explain how the two results lead to your prediction.
Response: ____________________
B4-P10
Two tests compare Zn in Cu²⁺ solution with Cu in Ag⁺ solution. They use different concentrations, different surface areas and different times. Name three things to keep the same so the comparison is fair. Explain why a test with a metal in a solution of its own ion helps.
Response: ____________________
B4-P11
Use these rows from the Data Booklet table of standard electrode potentials: Ag⁺ + e⁻ → Ag, +0.80 V; Cu²⁺ + 2e⁻ → Cu, +0.34 V; Zn²⁺ + 2e⁻ → Zn, -0.76 V. The conditions are standard: 25 °C and 1.0 mol/L solutions. A student reports E° = +1.10 V for Cu + Zn²⁺ → Cu²⁺ + Zn, by subtracting -0.76 from +0.34. Explain the mistake. Give the correct value with its sign. Which reaction does +1.10 V really describe?
Response: ____________________
B4-P12
A lab record says: a clean Cu strip in Ag⁺ solution gets a silver-coloured coating. In a control, Cu in Cu²⁺ solution shows no coating. Write a conclusion about the electrons that the record supports. Give two limits of the evidence.
Response: ____________________