B15 · Extra diploma-style practice

Download PDF · Answer online

B15-D01

A given result for iron and copper is predicted 0.79 V, measured 0.76 V. What is the difference, in volts to two decimal places?

Response: ____________________

B15-D02

Four cells of 1.07 V are joined in a row. What is the battery voltage, in volts to two decimal places?

Response: ____________________

B15-D03

Which column of a results table holds observations?

  1. The measured voltage
  2. The predicted voltage
  3. The table value
  4. The controlled variables

Response: ____________________

B15-D04

All measured voltages are 0.03 V below the predictions and the order matches. Which conclusion is best?

  1. The data disprove the table
  2. The data support the table with a small gap
  3. The table is useless
  4. The measurements are exactly right

Response: ____________________

B15-D05

Select every possible explanation for a small constant gap below the predicted voltage.

  1. The salt bridge adds resistance
  2. The strips have an oxide coating
  3. The concentration is not exactly 1.0 mol/L
  4. The table values are exact for all conditions

Response: ____________________

B15-D06

How could you test whether oxide coatings caused part of a gap?

  1. Sand the strips and measure again
  2. Use a bigger strip
  3. Change the metal
  4. Remove the voltmeter

Response: ____________________

B15-D07

Which is an inference?

  1. The zinc strip lost mass
  2. The copper strip gained a reddish-brown coating
  3. Zn²⁺ ions formed in the solution
  4. The voltmeter read 1.07 V

Response: ____________________

B15-D08

A student writes that the data prove the cause is the salt bridge. What is the best correction?

  1. It is a possible cause until it is tested
  2. It is certainly the cause
  3. Salt bridges never matter
  4. Remove the data

Response: ____________________

B15-D09

Select every part of a complete conclusion.

  1. A claim
  2. The evidence
  3. A possible explanation
  4. A guess without evidence

Response: ____________________

B15-D10

Why is repeating the trial an improvement to a design with one trial per cell?

  1. It shows how much the measurement varies
  2. It changes the table values
  3. It removes the controls
  4. It makes the cell stronger

Response: ____________________

B15-D11

Match each item to its role in battery evaluation.

Items

  1. Voltage
  2. Mass
  3. Recycling
  4. Lifetime

Targets

  1. How long the battery runs
  2. How much power the cell gives
  3. Handling used batteries
  4. How heavy the battery is

Response: ____________________

B15-D12

Put the analysis steps in order.

First to last

  1. Explain the gap with possible causes
  2. Put together the table
  3. Compare predicted and measured values
  4. Write a limitation and an improvement

Response: ____________________