B14 · Investigation: plan and predict · Notes and practice

Download the printable PDF

Write a testable question, draw a labelled cell design, predict the anode and voltage from the table, plan safe handling and plan a battery.

Open the complete lesson

Type in the blanks; your notes save on this device only. Use the backup controls at the bottom to keep a portable copy. Nothing is submitted.

1. Question, variables and design

A testable question

We have used the table to predict voltages. Now we test the predictions. A testable question links one thing we change to one thing we measure.

The variable you change is the variable. The variable you measure is the variable. Here we change the metal and measure the voltage.

A fair test keeps everything else the same. These are the controlled variables: the , temperature, electrode size and salt bridge.

The table values assume solutions at standard conditions. If a control changed, we could not tell what caused a change in voltage.

On the diploma: the independent variable is what you change, and the dependent variable is what you measure.

A labelled design

A half-cell is a metal strip, called an electrode, in a solution of its . The second half-cell is always copper in copper(II) sulfate.

A lets ions move between the half-cells. This keeps the charge balanced and completes the circuit. A voltmeter joins the strips through wires.

Label the , the cathode, the direction of electron flow and the concentrations. Electrons flow in the wire from the anode to the cathode.

On the diploma: a labelled diagram needs the salt bridge, the solutions with concentrations, the wires and the meter.

Zn/Cu cell, 0.500 A for 30.0 min. q = _______n(e⁻) = 900 ÷ (9.65 × 10⁴) = _______Zn → Zn²⁺ + 2e⁻, so zinc lost = _______Cu²⁺ + 2e⁻ → Cu, so copper gained = _______
Zinc and copper voltaic cell delivering a current. Give the charge, the moles of electrons and the mass lost and gained.

2. Predict, stay safe and plan a battery

Predict before measuring

The metal with the reduction value is the anode, because that metal is oxidized. The higher value is the cathode.

Zn/Cu: zinc (−0.76 V) is lower, so zinc is the anode. E°cell = cathode − anode = 0.34 − (−0.76) = . Dropping the minus sign gives a classic wrong answer.

Ag/Cu: silver (+0.80 V) has the higher value, so copper is the . E°cell = 0.80 − 0.34 = . Copper is not always the cathode.

When you double a half-reaction to balance electrons, you do not its table value. The voltage does not depend on the number of copies.

A prediction is not an . Only a measurement shows what the cell does. Ask where a number came from: the table or a meter.

Safety and disposal

Read the and the safety data sheet first. They are part of , the system for labelling hazardous materials in workplaces.

Wear goggles, gloves and an apron. Silver nitrate stains skin. Copper(II) compounds harm life in water.

Collect solutions that contain metal . Do not pour them down the drain, because they can harm water life.

On the diploma: name the hazard from the label, then a matching precaution, and give a reason for each step.

Plan a battery

Cells in a row their voltages. A device needs at least 3.0 V, and one Zn/Cu cell gives 1.10 V.

So 3.0 ÷ 1.10 = 2.7. We cannot use part of a cell, so round up and use cells. They give 3 × 1.10 = 3.30 V. Two cells give only 2.20 V.

The voltage as the cell works, because the reactants get used up. So the plan must include a test over time.

A bigger table voltage does not always make a better battery. Magnesium gives 2.71 V with copper but reacts with water. On the diploma: name a practical fact such as safety, cost or lifetime.

Use the diagram response box for labels and arrows in words, or draw on the printable PDF.

Answer the 12 core practice problems online · Completed notes and worked key

B14-P01

Given the question "How does the metal in one half-cell change the cell voltage?" Name the independent variable and the dependent variable.

Response: ____________________

B14-P02

Name two variables that must be controlled when you compare metals joined to copper, and explain why.

Response: ____________________

B14-P03

List the parts that a labelled diagram of a zinc and copper cell must show.

Response: ____________________

B14-P04

Explain what the salt bridge does in your design.

Response: ____________________

B14-P05

Given Fe²⁺/Fe −0.45 V and Cu²⁺/Cu +0.34 V. Predict the anode, the cell reaction and the voltage.

Response: ____________________

B14-P06

Given Ag⁺/Ag +0.80 V and Cu²⁺/Cu +0.34 V. Which metal is the anode and what is the voltage?

Response: ____________________

B14-P07

Given Ni²⁺/Ni −0.26 V and Ag⁺/Ag +0.80 V. Write the cell reaction and find the voltage. Explain why the silver table value is not doubled.

Response: ____________________

B14-P08

A student predicts +0.79 V and says this proves the measured voltage will be 0.79 V. Explain what is wrong.

Response: ____________________

B14-P09

Name two hazards or precautions for a plan that uses silver nitrate solution, and one disposal step.

Response: ____________________

B14-P10

A device needs at least 3.0 V. Using 1.10 V cells in a row, find how many cells are needed and the voltage of the battery.

Response: ____________________

B14-P11

Explain why a metal with a large cell voltage can still be a poor choice for a battery. Use magnesium as an example.

Response: ____________________

B14-P12

Given a plan and a prediction only. State what they can show and what they cannot show, and why a real measurement may differ.

Response: ____________________