B14 · Extra diploma-style practice
Download PDF · Answer online
B14-D01
Zn²⁺/Zn is −0.76 V and Cu²⁺/Cu is +0.34 V. What is the predicted E°cell, in volts to two decimal places?
Response: ____________________
B14-D02
Fe²⁺/Fe is −0.45 V and Cu²⁺/Cu is +0.34 V. What is the predicted E°cell, in volts to two decimal places?
Response: ____________________
B14-D03
In an investigation of how the metal affects cell voltage, which is the dependent variable?
- The metal
- The voltage
- The concentration
- The salt bridge
Response: ____________________
B14-D04
A silver half-cell (+0.80 V) is joined to a copper half-cell (+0.34 V). Which statement is correct?
- Silver is the anode
- Copper is the anode
- Both are cathodes
- Neither electrode changes
Response: ____________________
B14-D05
A device needs 5.0 V and each cell gives 1.10 V. How many cells in a row are needed? Enter an integer.
Response: ____________________
B14-D06
Select every variable that should be controlled when comparing metals joined to copper.
- The concentration of the solutions
- The temperature
- The size of the electrodes
- The metal being tested
Response: ____________________
B14-D07
What does the salt bridge do in the design?
- It lets ions move to balance charge
- It supplies electrons
- It measures the voltage
- It speeds up the metals
Response: ____________________
B14-D08
Select every correct safe handling step for solutions that contain metal ions.
- Read the label and safety data sheet
- Wear goggles, gloves and an apron
- Collect the waste in a container
- Pour the waste down the drain
Response: ____________________
B14-D09
Ni²⁺/Ni is −0.26 V and Ag⁺/Ag is +0.80 V. What is E°cell, in volts to two decimal places?
Response: ____________________
B14-D10
Which statement is a prediction and not an observation?
- The voltmeter read 1.07 V
- The zinc strip lost mass
- The table gives E°cell = +1.10 V
- The copper strip gained a coating
Response: ____________________
B14-D11
Match each part of the design to its job.
Items
- Salt bridge
- Voltmeter
- Anode label
- Waste container
Targets
- Reads the voltage
- Marks where oxidation occurs
- Balances charge
- Holds metal-ion solutions
Response: ____________________
B14-D12
Put the planning steps in order.
First to last
- Predict the anode and voltage
- Write a testable question
- Plan safe handling and disposal
- Draw and label the design
Response: ____________________