B12 · Industrial applications and corrosion protection · Notes and practice
Download the printable PDF
Explain rusting as a redox cell, choose a method to protect iron using the reduction table, describe plating, refining, electrowinning and aluminium production, and judge claims with evidence.
Open the complete lesson
Type in the blanks; your notes save on this device only. Use the backup controls at the bottom to keep a portable copy. Nothing is submitted.
1. Rusting and barriers
Rusting is a tiny cell
Rusting is just redox, like B1. Corrosion is the slow wearing away of a metal by a reaction. At one spot, iron loses electrons: Fe → Fe²⁺ + 2e⁻.
The electrons travel through the iron to another spot. There, oxygen and water gain them: O₂ + 2H₂O + 4e⁻ → . So iron needs both and to rust.
The higher table value is the cathode, so oxygen (+0.40 V) is reduced. E°cell = cathode − anode = 0.40 − (−0.45) = .
A positive value says rusting is , so it happens by itself. It does not say how rusting is. Salt water speeds it up because its ions carry charge.
On the diploma: to find what is oxidized, look for the particle that loses electrons. A wrong option flips the sign or adds the numbers.
Barriers
A barrier is a coating that keeps water and oxygen off the iron. Paint, oil and plastic are barriers. A barrier does not take part in the redox reaction.
It works only while whole. A deep lets water and oxygen reach the iron again, and rusting can creep under the paint.
A metal coating is a barrier too. At a scratch, the metal lower on the table is oxidized first, because it gives up electrons more easily.
Tin (−0.14 V) is above iron (−0.45 V), so at a scratch the corrodes. Zinc (−0.76 V) is below iron, so the corrodes and protects the iron.
On the diploma: predict by comparing the two table values and naming the lower one. The wrong option picks the higher value.
Rusting and protection of iron. Give E°cell for rusting and decide which metal corrodes in each case.2. Sacrificial anodes and power supplies
Choose a sacrificial metal
A sacrificial anode is a block of metal that gives up electrons more easily than iron. Join it to the iron, and the block is oxidized instead.
So the block must be iron on the table. That makes it the stronger reducing agent, which means it loses electrons more easily. It is the and the iron is the cathode.
Compare the metals with protected minus sacrificial. For Mg: −0.45 − (−2.37) = . For Zn: −0.45 − (−0.76) = . Positive means the metal works.
These are comparison numbers, not the real cell voltage. In the real cell, oxygen (+0.40 V) is reduced at the iron. With magnesium that is 0.40 − (−2.37) = +2.77 V.
Copper (+0.34 V) is above iron, so it . The iron would become the anode and corrode faster. On the diploma: the wrong options are the metals above iron.
The block needs an electrical to the iron. It also needs an electrolyte, a liquid with dissolved ions such as wet soil or sea water. It is used up, so it must be .
A larger number like +1.92 V shows magnesium is the stronger reducing agent. It does not prove lower cost or a longer .
Use a power supply
A power supply pushes electrons around a circuit. A terminal is a connection point on it. Join the pipeline to the terminal.
Electrons are pushed onto the pipeline, so it is the of an electrolytic cell. That is a cell that uses electrical energy to force a reaction.
A separate inert anode goes on the positive terminal. Inert means it does not react or dissolve. Oxidation happens there, not at the iron.
Both methods keep the protected metal as the cathode, so it is not oxidized. A sacrificial anode needs new blocks. A power supply needs .
On the diploma: the protected metal always goes on the negative terminal. The wrong option is the positive one.
3. Making, cleaning and coating metals
Electrolytic processes
Electroplating coats an object with a thin layer of metal. The object is the , because metal ions are reduced onto it: Ag⁺ + e⁻ → .
Refining purifies a metal. The impure metal is the and dissolves: Cu → Cu²⁺ + 2e⁻. Pure metal forms at the cathode.
Electrowinning recovers a metal from a solution of its ions. The anode is and does not dissolve, so the metal comes from the solution.
The Faraday chain works for all three processes. On the diploma: a common wrong choice says the anode dissolves in electrowinning.
Watch: Plating a copper ring with silver (Tyler DeWitt, “Electroplating”, 1:30)
Watch: The whole plating cell in one picture (Tyler DeWitt, “Electroplating Part 2”, 7:22)
Aluminium
Al³⁺/Al is −1.66 V, very low on the table. In a water solution, the higher value is reduced first. Water is −0.83 V, so forms at the cathode, not aluminium.
The fix is to remove the water. Aluminium oxide is dissolved in cryolite, a melted mineral with no water. Then Al³⁺ (−1.66 V) beats Na⁺ (−2.71 V): Al³⁺ + 3e⁻ → .
The oxide ions are oxidized at a carbon anode. The oxygen reacts with the carbon, so the anode is .
A table value shows that a method . It does not prove lower cost or a longer life.
Redox in living things
Oxidation numbers help us follow electrons. In cellular respiration, C₆H₁₂O₆ + 6O₂ → 6CO₂ + 6H₂O, the average oxidation number of carbon rises from 0 to . So glucose is .
Six carbons each lose 4 electrons, so 24 are lost. Oxygen falls from 0 to −2, so O₂ is and gains the same 24 electrons.
Oxygen is the oxidizing agent and glucose is the agent. Respiration is spontaneous, so it releases energy, like a voltaic cell.
Photosynthesis is the . It is not spontaneous by itself, so supplies the energy, like a power supply in an electrolytic cell.
On the diploma: the particle whose oxidation number goes down is the one reduced.
Use the diagram response box for labels and arrows in words, or draw on the printable PDF.
Answer the 12 core practice problems online · Completed notes and worked key
B12-P01
Iron rusts in damp air. Write the oxidation and reduction half-reactions and find E°cell (O₂/OH⁻ +0.40 V; Fe²⁺/Fe −0.45 V).
Response: ____________________
B12-P02
A student says that a positive E°cell of +0.85 V means iron rusts quickly. Explain what the value shows and what it does not show.
Response: ____________________
B12-P03
Explain how a layer of paint protects iron, and give one way that it can fail.
Response: ____________________
B12-P04
Tin-plated steel is scratched (Sn²⁺/Sn −0.14 V; Fe²⁺/Fe −0.45 V). Which metal corrodes at the scratch, and why?
Response: ____________________
B12-P05
Zinc-plated steel is scratched (Zn²⁺/Zn −0.76 V; Fe²⁺/Fe −0.45 V). Which metal corrodes, and why does the iron stay protected?
Response: ____________________
B12-P06
A steel pipe in wet soil is joined to a magnesium block (Mg²⁺/Mg −2.37 V; Fe²⁺/Fe −0.45 V). Name the anode and find protected minus sacrificial.
Response: ____________________
B12-P07
A plan uses copper blocks to protect a steel pipe (Cu²⁺/Cu +0.34 V). Will the plan work? Explain with the table.
Response: ____________________
B12-P08
The metals to choose from for protecting a steel hull are Cu (+0.34 V), Zn (−0.76 V), Sn (−0.14 V) and Pb (−0.13 V), with Fe²⁺/Fe at −0.45 V. Choose the metal and give protected minus sacrificial.
Response: ____________________
B12-P09
A sacrificial block must be replaced from time to time. Explain why, and name one other thing that the block needs to work.
Response: ____________________
B12-P10
A buried steel pipeline is protected with a power supply. State the terminal that the pipeline is joined to and the electrode where oxidation happens.
Response: ____________________
B12-P11
A steel spoon is silver plated. State whether the spoon is the anode or the cathode, and write the half-reaction at the spoon.
Response: ____________________
B12-P12
A student tries to make aluminium by electrolysis of aqueous Al³⁺ with inert electrodes (Al³⁺/Al −1.66 V; water −0.83 V). State what forms at the cathode and how aluminium is made in industry.
Response: ____________________